--- /dev/null
+menu "SoC Audio for Freescale CPUs"
+
+comment "Common SoC Audio options for Freescale CPUs:"
+
+config SND_SOC_FSL_ASRC
+ tristate "Asynchronous Sample Rate Converter (ASRC) module support"
+ select REGMAP_MMIO
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ help
+ Say Y if you want to add Asynchronous Sample Rate Converter (ASRC)
+ support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_SOC_FSL_SAI
+ tristate "Synchronous Audio Interface (SAI) module support"
+ select REGMAP_MMIO
+ select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ help
+ Say Y if you want to add Synchronous Audio Interface (SAI)
+ support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_SOC_FSL_SSI
+ tristate "Synchronous Serial Interface module (SSI) support"
+ select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+ select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
+ select REGMAP_MMIO
+ help
+ Say Y if you want to add Synchronous Serial Interface (SSI)
+ support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_SOC_FSL_SPDIF
+ tristate "Sony/Philips Digital Interface (S/PDIF) module support"
+ select REGMAP_MMIO
+ select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+ select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
+ help
+ Say Y if you want to add Sony/Philips Digital Interface (SPDIF)
+ support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_SOC_FSL_ESAI
+ tristate "Enhanced Serial Audio Interface (ESAI) module support"
+ select REGMAP_MMIO
+ select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+ help
+ Say Y if you want to add Enhanced Synchronous Audio Interface
+ (ESAI) support for the Freescale CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_SOC_FSL_UTILS
+ tristate
+
+config SND_SOC_IMX_PCM_DMA
+ tristate
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+
+config SND_SOC_IMX_AUDMUX
+ tristate "Digital Audio Mux module support"
+ help
+ Say Y if you want to add Digital Audio Mux (AUDMUX) support
+ for the ARM i.MX CPUs.
+ This option is only useful for out-of-tree drivers since
+ in-tree drivers select it automatically.
+
+config SND_POWERPC_SOC
+ tristate "SoC Audio for Freescale PowerPC CPUs"
+ depends on FSL_SOC || PPC_MPC52xx
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the PowerPC CPUs.
+
+config SND_IMX_SOC
+ tristate "SoC Audio for Freescale i.MX CPUs"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the i.MX CPUs.
+
+if SND_POWERPC_SOC
+
+config SND_MPC52xx_DMA
+ tristate
+
+config SND_SOC_POWERPC_DMA
+ tristate
+
+comment "SoC Audio support for Freescale PPC boards:"
+
+config SND_SOC_MPC8610_HPCD
+ tristate "ALSA SoC support for the Freescale MPC8610 HPCD board"
+ # I2C is necessary for the CS4270 driver
+ depends on MPC8610_HPCD && I2C
+ select SND_SOC_FSL_SSI
+ select SND_SOC_FSL_UTILS
+ select SND_SOC_POWERPC_DMA
+ select SND_SOC_CS4270
+ select SND_SOC_CS4270_VD33_ERRATA
+ default y if MPC8610_HPCD
+ help
+ Say Y if you want to enable audio on the Freescale MPC8610 HPCD.
+
+config SND_SOC_P1022_DS
+ tristate "ALSA SoC support for the Freescale P1022 DS board"
+ # I2C is necessary for the WM8776 driver
+ depends on P1022_DS && I2C
+ select SND_SOC_FSL_SSI
+ select SND_SOC_FSL_UTILS
+ select SND_SOC_POWERPC_DMA
+ select SND_SOC_WM8776
+ default y if P1022_DS
+ help
+ Say Y if you want to enable audio on the Freescale P1022 DS board.
+ This will also include the Wolfson Microelectronics WM8776 codec
+ driver.
+
+config SND_SOC_P1022_RDK
+ tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board"
+ # I2C is necessary for the WM8960 driver
+ depends on P1022_RDK && I2C
+ select SND_SOC_FSL_SSI
+ select SND_SOC_FSL_UTILS
+ select SND_SOC_POWERPC_DMA
+ select SND_SOC_WM8960
+ default y if P1022_RDK
+ help
+ Say Y if you want to enable audio on the Freescale / iVeia
+ P1022 RDK board. This will also include the Wolfson
+ Microelectronics WM8960 codec driver.
+
+config SND_SOC_MPC5200_I2S
+ tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select SND_MPC52xx_DMA
+ select PPC_BESTCOMM_GEN_BD
+ help
+ Say Y here to support the MPC5200 PSCs in I2S mode.
+
+config SND_SOC_MPC5200_AC97
+ tristate "Freescale MPC5200 PSC in AC97 mode driver"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select SND_SOC_AC97_BUS
+ select SND_MPC52xx_DMA
+ select PPC_BESTCOMM_GEN_BD
+ help
+ Say Y here to support the MPC5200 PSCs in AC97 mode.
+
+config SND_MPC52xx_SOC_PCM030
+ tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
+ depends on PPC_MPC5200_SIMPLE
+ select SND_SOC_MPC5200_AC97
+ select SND_SOC_WM9712
+ help
+ Say Y if you want to add support for sound on the Phytec pcm030
+ baseboard.
+
+config SND_MPC52xx_SOC_EFIKA
+ tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
+ depends on PPC_EFIKA
+ select SND_SOC_MPC5200_AC97
+ select SND_SOC_STAC9766
+ help
+ Say Y if you want to add support for sound on the Efika.
+
+endif # SND_POWERPC_SOC
+
+if SND_IMX_SOC
+
+config SND_SOC_IMX_SSI
+ tristate
+ select SND_SOC_FSL_UTILS
+
+config SND_SOC_IMX_PCM_FIQ
+ tristate
+ select FIQ
+
+comment "SoC Audio support for Freescale i.MX boards:"
+
+config SND_MXC_SOC_WM1133_EV1
+ tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted"
+ depends on MACH_MX31ADS_WM1133_EV1
+ select SND_SOC_WM8350
+ select SND_SOC_IMX_PCM_FIQ
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Enable support for audio on the i.MX31ADS with the WM1133-EV1
+ PMIC board with WM8835x fitted.
+
+config SND_SOC_MX27VIS_AIC32X4
+ tristate "SoC audio support for Visstrim M10 boards"
+ depends on MACH_IMX27_VISSTRIM_M10 && I2C
+ select SND_SOC_TLV320AIC32X4
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Say Y if you want to add support for SoC audio on Visstrim SM10
+ board with TLV320AIC32X4 codec.
+
+config SND_SOC_PHYCORE_AC97
+ tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+ depends on MACH_PCM043 || MACH_PCA100
+ select SND_SOC_AC97_BUS
+ select SND_SOC_WM9712
+ select SND_SOC_IMX_PCM_FIQ
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Say Y if you want to add support for SoC audio on Phytec phyCORE
+ and phyCARD boards in AC97 mode
+
+config SND_SOC_EUKREA_TLV320
+ tristate "Eukrea TLV320"
+ depends on ARCH_MXC && I2C
+ select SND_SOC_TLV320AIC23_I2C
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ select SND_SOC_FSL_SSI
+ select SND_SOC_IMX_PCM_DMA
+ help
+ Enable I2S based access to the TLV320AIC23B codec attached
+ to the SSI interface
+
+config SND_SOC_IMX_WM8962
+ tristate "SoC Audio support for i.MX boards with wm8962"
+ depends on OF && I2C && INPUT
+ select SND_SOC_WM8962
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_FSL_SSI
+ help
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a wm8962 codec.
+
+config SND_SOC_IMX_ES8328
+ tristate "SoC Audio support for i.MX boards with the ES8328 codec"
+ depends on OF && (I2C || SPI)
+ select SND_SOC_ES8328_I2C if I2C
+ select SND_SOC_ES8328_SPI if SPI_MASTER
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_FSL_SSI
+ help
+ Say Y if you want to add support for the ES8328 audio codec connected
+ via SSI/I2S over either SPI or I2C.
+
+config SND_SOC_IMX_SGTL5000
+ tristate "SoC Audio support for i.MX boards with sgtl5000"
+ depends on OF && I2C
+ select SND_SOC_SGTL5000
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_FSL_SSI
+ help
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a sgtl5000 codec.
+
+config SND_SOC_IMX_SPDIF
+ tristate "SoC Audio support for i.MX boards with S/PDIF"
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_FSL_SPDIF
+ help
+ SoC Audio support for i.MX boards with S/PDIF
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a S/DPDIF.
+
+config SND_SOC_IMX_MC13783
+ tristate "SoC Audio support for I.MX boards with mc13783"
+ depends on MFD_MC13XXX && ARM
+ select SND_SOC_IMX_SSI
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_MC13783
+ select SND_SOC_IMX_PCM_DMA
+
+config SND_SOC_FSL_ASOC_CARD
+ tristate "Generic ASoC Sound Card with ASRC support"
+ depends on OF && I2C
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_FSL_ESAI
+ select SND_SOC_FSL_SAI
+ select SND_SOC_FSL_SSI
+ help
+ ALSA SoC Audio support with ASRC feature for Freescale SoCs that have
+ ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888
+ and SGTL5000.
+ Say Y if you want to add support for Freescale Generic ASoC Sound Card.
+
+endif # SND_IMX_SOC
+
+endmenu
Code Review / kvmfornfv.git / blobdiff