--- /dev/null
+/*
+ * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "sgtl5000.h"
+
+#define SGTL5000_DAP_REG_OFFSET 0x0100
+#define SGTL5000_MAX_REG_OFFSET 0x013A
+
+/* default value of sgtl5000 registers */
+static const struct reg_default sgtl5000_reg_defaults[] = {
+ { SGTL5000_CHIP_DIG_POWER, 0x0000 },
+ { SGTL5000_CHIP_CLK_CTRL, 0x0008 },
+ { SGTL5000_CHIP_I2S_CTRL, 0x0010 },
+ { SGTL5000_CHIP_SSS_CTRL, 0x0010 },
+ { SGTL5000_CHIP_ADCDAC_CTRL, 0x020c },
+ { SGTL5000_CHIP_DAC_VOL, 0x3c3c },
+ { SGTL5000_CHIP_PAD_STRENGTH, 0x015f },
+ { SGTL5000_CHIP_ANA_ADC_CTRL, 0x0000 },
+ { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 },
+ { SGTL5000_CHIP_ANA_CTRL, 0x0111 },
+ { SGTL5000_CHIP_LINREG_CTRL, 0x0000 },
+ { SGTL5000_CHIP_REF_CTRL, 0x0000 },
+ { SGTL5000_CHIP_MIC_CTRL, 0x0000 },
+ { SGTL5000_CHIP_LINE_OUT_CTRL, 0x0000 },
+ { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 },
+ { SGTL5000_CHIP_ANA_POWER, 0x7060 },
+ { SGTL5000_CHIP_PLL_CTRL, 0x5000 },
+ { SGTL5000_CHIP_CLK_TOP_CTRL, 0x0000 },
+ { SGTL5000_CHIP_ANA_STATUS, 0x0000 },
+ { SGTL5000_CHIP_SHORT_CTRL, 0x0000 },
+ { SGTL5000_CHIP_ANA_TEST2, 0x0000 },
+ { SGTL5000_DAP_CTRL, 0x0000 },
+ { SGTL5000_DAP_PEQ, 0x0000 },
+ { SGTL5000_DAP_BASS_ENHANCE, 0x0040 },
+ { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f },
+ { SGTL5000_DAP_AUDIO_EQ, 0x0000 },
+ { SGTL5000_DAP_SURROUND, 0x0040 },
+ { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f },
+ { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f },
+ { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f },
+ { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f },
+ { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f },
+ { SGTL5000_DAP_MAIN_CHAN, 0x8000 },
+ { SGTL5000_DAP_MIX_CHAN, 0x0000 },
+ { SGTL5000_DAP_AVC_CTRL, 0x0510 },
+ { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 },
+ { SGTL5000_DAP_AVC_ATTACK, 0x0028 },
+ { SGTL5000_DAP_AVC_DECAY, 0x0050 },
+};
+
+/* regulator supplies for sgtl5000, VDDD is an optional external supply */
+enum sgtl5000_regulator_supplies {
+ VDDA,
+ VDDIO,
+ VDDD,
+ SGTL5000_SUPPLY_NUM
+};
+
+/* vddd is optional supply */
+static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
+ "VDDA",
+ "VDDIO",
+ "VDDD"
+};
+
+#define LDO_CONSUMER_NAME "VDDD_LDO"
+#define LDO_VOLTAGE 1200000
+
+static struct regulator_consumer_supply ldo_consumer[] = {
+ REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
+};
+
+static struct regulator_init_data ldo_init_data = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldo_consumer[0],
+};
+
+/*
+ * sgtl5000 internal ldo regulator,
+ * enabled when VDDD not provided
+ */
+struct ldo_regulator {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+ int voltage;
+ void *codec_data;
+ bool enabled;
+};
+
+enum sgtl5000_micbias_resistor {
+ SGTL5000_MICBIAS_OFF = 0,
+ SGTL5000_MICBIAS_2K = 2,
+ SGTL5000_MICBIAS_4K = 4,
+ SGTL5000_MICBIAS_8K = 8,
+};
+
+/* sgtl5000 private structure in codec */
+struct sgtl5000_priv {
+ int sysclk; /* sysclk rate */
+ int master; /* i2s master or not */
+ int fmt; /* i2s data format */
+ struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
+ struct ldo_regulator *ldo;
+ struct regmap *regmap;
+ struct clk *mclk;
+ int revision;
+ u8 micbias_resistor;
+ u8 micbias_voltage;
+};
+
+/*
+ * mic_bias power on/off share the same register bits with
+ * output impedance of mic bias, when power on mic bias, we
+ * need reclaim it to impedance value.
+ * 0x0 = Powered off
+ * 0x1 = 2Kohm
+ * 0x2 = 4Kohm
+ * 0x3 = 8Kohm
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ /* change mic bias resistor */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_MASK,
+ sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_MASK, 0);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * As manual described, ADC/DAC only works when VAG powerup,
+ * So enabled VAG before ADC/DAC up.
+ * In power down case, we need wait 400ms when vag fully ramped down.
+ */
+static int power_vag_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ /*
+ * Don't clear VAG_POWERUP, when both DAC and ADC are
+ * operational to prevent inadvertently starving the
+ * other one of them.
+ */
+ if ((snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER) &
+ mask) != mask) {
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ msleep(400);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* input sources for ADC */
+static const char *adc_mux_text[] = {
+ "MIC_IN", "LINE_IN"
+};
+
+static SOC_ENUM_SINGLE_DECL(adc_enum,
+ SGTL5000_CHIP_ANA_CTRL, 2,
+ adc_mux_text);
+
+static const struct snd_kcontrol_new adc_mux =
+SOC_DAPM_ENUM("Capture Mux", adc_enum);
+
+/* input sources for DAC */
+static const char *dac_mux_text[] = {
+ "DAC", "LINE_IN"
+};
+
+static SOC_ENUM_SINGLE_DECL(dac_enum,
+ SGTL5000_CHIP_ANA_CTRL, 6,
+ dac_mux_text);
+
+static const struct snd_kcontrol_new dac_mux =
+SOC_DAPM_ENUM("Headphone Mux", dac_enum);
+
+static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("LINE_IN"),
+ SND_SOC_DAPM_INPUT("MIC_IN"),
+
+ SND_SOC_DAPM_OUTPUT("HP_OUT"),
+ SND_SOC_DAPM_OUTPUT("LINE_OUT"),
+
+ SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
+ mic_bias_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
+ SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
+
+ /* aif for i2s input */
+ SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 0, 0),
+
+ /* aif for i2s output */
+ SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 1, 0),
+
+ SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
+ SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
+
+ SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
+ SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+};
+
+/* routes for sgtl5000 */
+static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
+ {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
+ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
+
+ {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
+ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
+
+ {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
+ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
+ {"LO", NULL, "DAC"}, /* dac --> line_out */
+
+ {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
+ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
+
+ {"LINE_OUT", NULL, "LO"},
+ {"HP_OUT", NULL, "HP"},
+};
+
+/* custom function to fetch info of PCM playback volume */
+static int dac_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 0xfc - 0x3c;
+ return 0;
+}
+
+/*
+ * custom function to get of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ * -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * register value map to userspace value
+ *
+ * register value 0x3c(0dB) 0xf0(-90dB)0xfc
+ * ------------------------------
+ * userspace value 0xc0 0
+ */
+static int dac_get_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ int reg;
+ int l;
+ int r;
+
+ reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
+
+ /* get left channel volume */
+ l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
+
+ /* get right channel volume */
+ r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+ /* make sure value fall in (0x3c,0xfc) */
+ l = clamp(l, 0x3c, 0xfc);
+ r = clamp(r, 0x3c, 0xfc);
+
+ /* invert it and map to userspace value */
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ ucontrol->value.integer.value[0] = l;
+ ucontrol->value.integer.value[1] = r;
+
+ return 0;
+}
+
+/*
+ * custom function to put of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ * -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * userspace value map to register value
+ *
+ * userspace value 0xc0 0
+ * ------------------------------
+ * register value 0x3c(0dB) 0xf0(-90dB)0xfc
+ */
+static int dac_put_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ int reg;
+ int l;
+ int r;
+
+ l = ucontrol->value.integer.value[0];
+ r = ucontrol->value.integer.value[1];
+
+ /* make sure userspace volume fall in (0, 0xfc-0x3c) */
+ l = clamp(l, 0, 0xfc - 0x3c);
+ r = clamp(r, 0, 0xfc - 0x3c);
+
+ /* invert it, get the value can be set to register */
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ /* shift to get the register value */
+ reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
+ r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+ snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
+
+ return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
+
+/* tlv for mic gain, 0db 20db 30db 40db */
+static const unsigned int mic_gain_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
+};
+
+/* tlv for hp volume, -51.5db to 12.0db, step .5db */
+static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
+
+static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
+ /* SOC_DOUBLE_S8_TLV with invert */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = dac_info_volsw,
+ .get = dac_get_volsw,
+ .put = dac_put_volsw,
+ },
+
+ SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
+ SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
+ SGTL5000_CHIP_ANA_ADC_CTRL,
+ 8, 1, 0, capture_6db_attenuate),
+ SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+
+ SOC_DOUBLE_TLV("Headphone Playback Volume",
+ SGTL5000_CHIP_ANA_HP_CTRL,
+ 0, 8,
+ 0x7f, 1,
+ headphone_volume),
+ SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
+ 5, 1, 0),
+
+ SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
+ 0, 3, 0, mic_gain_tlv),
+};
+
+/* mute the codec used by alsa core */
+static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ adcdac_ctrl, mute ? adcdac_ctrl : 0);
+
+ return 0;
+}
+
+/* set codec format */
+static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ u16 i2sctl = 0;
+
+ sgtl5000->master = 0;
+ /*
+ * i2s clock and frame master setting.
+ * ONLY support:
+ * - clock and frame slave,
+ * - clock and frame master
+ */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ i2sctl |= SGTL5000_I2S_MASTER;
+ sgtl5000->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* setting i2s data format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ i2sctl |= SGTL5000_I2S_MODE_RJ << SGTL5000_I2S_MODE_SHIFT;
+ i2sctl |= SGTL5000_I2S_LRPOL;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+ /* Clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ i2sctl |= SGTL5000_I2S_SCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+
+ return 0;
+}
+
+/* set codec sysclk */
+static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (clk_id) {
+ case SGTL5000_SYSCLK:
+ sgtl5000->sysclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * set clock according to i2s frame clock,
+ * sgtl5000 provides 2 clock sources:
+ * 1. sys_mclk: sample freq can only be configured to
+ * 1/256, 1/384, 1/512 of sys_mclk.
+ * 2. pll: can derive any audio clocks.
+ *
+ * clock setting rules:
+ * 1. in slave mode, only sys_mclk can be used
+ * 2. as constraint by sys_mclk, sample freq should be set to 32 kHz, 44.1 kHz
+ * and above.
+ * 3. usage of sys_mclk is preferred over pll to save power.
+ */
+static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int clk_ctl = 0;
+ int sys_fs; /* sample freq */
+
+ /*
+ * sample freq should be divided by frame clock,
+ * if frame clock is lower than 44.1 kHz, sample freq should be set to
+ * 32 kHz or 44.1 kHz.
+ */
+ switch (frame_rate) {
+ case 8000:
+ case 16000:
+ sys_fs = 32000;
+ break;
+ case 11025:
+ case 22050:
+ sys_fs = 44100;
+ break;
+ default:
+ sys_fs = frame_rate;
+ break;
+ }
+
+ /* set divided factor of frame clock */
+ switch (sys_fs / frame_rate) {
+ case 4:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ case 2:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ case 1:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set the sys_fs according to frame rate */
+ switch (sys_fs) {
+ case 32000:
+ clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 44100:
+ clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 48000:
+ clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 96000:
+ clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ default:
+ dev_err(codec->dev, "frame rate %d not supported\n",
+ frame_rate);
+ return -EINVAL;
+ }
+
+ /*
+ * calculate the divider of mclk/sample_freq,
+ * factor of freq = 96 kHz can only be 256, since mclk is in the range
+ * of 8 MHz - 27 MHz
+ */
+ switch (sgtl5000->sysclk / frame_rate) {
+ case 256:
+ clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ case 384:
+ clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ case 512:
+ clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ default:
+ /* if mclk does not satisfy the divider, use pll */
+ if (sgtl5000->master) {
+ clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ } else {
+ dev_err(codec->dev,
+ "PLL not supported in slave mode\n");
+ dev_err(codec->dev, "%d ratio is not supported. "
+ "SYS_MCLK needs to be 256, 384 or 512 * fs\n",
+ sgtl5000->sysclk / frame_rate);
+ return -EINVAL;
+ }
+ }
+
+ /* if using pll, please check manual 6.4.2 for detail */
+ if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
+ u64 out, t;
+ int div2;
+ int pll_ctl;
+ unsigned int in, int_div, frac_div;
+
+ if (sgtl5000->sysclk > 17000000) {
+ div2 = 1;
+ in = sgtl5000->sysclk / 2;
+ } else {
+ div2 = 0;
+ in = sgtl5000->sysclk;
+ }
+ if (sys_fs == 44100)
+ out = 180633600;
+ else
+ out = 196608000;
+ t = do_div(out, in);
+ int_div = out;
+ t *= 2048;
+ do_div(t, in);
+ frac_div = t;
+ pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
+ frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
+
+ snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+ if (div2)
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ SGTL5000_INPUT_FREQ_DIV2);
+ else
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ 0);
+
+ /* power up pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+
+ /* if using pll, clk_ctrl must be set after pll power up */
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+ } else {
+ /* otherwise, clk_ctrl must be set before pll power down */
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
+ /* power down pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ * input: params_rate, params_fmt
+ */
+static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int channels = params_channels(params);
+ int i2s_ctl = 0;
+ int stereo;
+ int ret;
+
+ /* sysclk should already set */
+ if (!sgtl5000->sysclk) {
+ dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
+ return -EFAULT;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ stereo = SGTL5000_DAC_STEREO;
+ else
+ stereo = SGTL5000_ADC_STEREO;
+
+ /* set mono to save power */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
+ channels == 1 ? 0 : stereo);
+
+ /* set codec clock base on lrclk */
+ ret = sgtl5000_set_clock(codec, params_rate(params));
+ if (ret)
+ return ret;
+
+ /* set i2s data format */
+ switch (params_width(params)) {
+ case 16:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case 20:
+ i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case 24:
+ i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case 32:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
+ SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
+ i2s_ctl);
+
+ return 0;
+}
+
+#ifdef CONFIG_REGULATOR
+static int ldo_regulator_is_enabled(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+ return ldo->enabled;
+}
+
+static int ldo_regulator_enable(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+ struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+ int reg;
+
+ if (ldo_regulator_is_enabled(dev))
+ return 0;
+
+ /* set regulator value firstly */
+ reg = (1600 - ldo->voltage / 1000) / 50;
+ reg = clamp(reg, 0x0, 0xf);
+
+ /* amend the voltage value, unit: uV */
+ ldo->voltage = (1600 - reg * 50) * 1000;
+
+ /* set voltage to register */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ SGTL5000_LINREG_VDDD_MASK, reg);
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINEREG_D_POWERUP,
+ SGTL5000_LINEREG_D_POWERUP);
+
+ /* when internal ldo is enabled, simple digital power can be disabled */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP,
+ 0);
+
+ ldo->enabled = 1;
+ return 0;
+}
+
+static int ldo_regulator_disable(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+ struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINEREG_D_POWERUP,
+ 0);
+
+ /* clear voltage info */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ SGTL5000_LINREG_VDDD_MASK, 0);
+
+ ldo->enabled = 0;
+
+ return 0;
+}
+
+static int ldo_regulator_get_voltage(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+ return ldo->voltage;
+}
+
+static struct regulator_ops ldo_regulator_ops = {
+ .is_enabled = ldo_regulator_is_enabled,
+ .enable = ldo_regulator_enable,
+ .disable = ldo_regulator_disable,
+ .get_voltage = ldo_regulator_get_voltage,
+};
+
+static int ldo_regulator_register(struct snd_soc_codec *codec,
+ struct regulator_init_data *init_data,
+ int voltage)
+{
+ struct ldo_regulator *ldo;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct regulator_config config = { };
+
+ ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
+
+ if (!ldo)
+ return -ENOMEM;
+
+ ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
+ if (!ldo->desc.name) {
+ kfree(ldo);
+ dev_err(codec->dev, "failed to allocate decs name memory\n");
+ return -ENOMEM;
+ }
+
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.owner = THIS_MODULE;
+ ldo->desc.ops = &ldo_regulator_ops;
+ ldo->desc.n_voltages = 1;
+
+ ldo->codec_data = codec;
+ ldo->voltage = voltage;
+
+ config.dev = codec->dev;
+ config.driver_data = ldo;
+ config.init_data = init_data;
+
+ ldo->dev = regulator_register(&ldo->desc, &config);
+ if (IS_ERR(ldo->dev)) {
+ int ret = PTR_ERR(ldo->dev);
+
+ dev_err(codec->dev, "failed to register regulator\n");
+ kfree(ldo->desc.name);
+ kfree(ldo);
+
+ return ret;
+ }
+ sgtl5000->ldo = ldo;
+
+ return 0;
+}
+
+static int ldo_regulator_remove(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct ldo_regulator *ldo = sgtl5000->ldo;
+
+ if (!ldo)
+ return 0;
+
+ regulator_unregister(ldo->dev);
+ kfree(ldo->desc.name);
+ kfree(ldo);
+
+ return 0;
+}
+#else
+static int ldo_regulator_register(struct snd_soc_codec *codec,
+ struct regulator_init_data *init_data,
+ int voltage)
+{
+ dev_err(codec->dev, "this setup needs regulator support in the kernel\n");
+ return -EINVAL;
+}
+
+static int ldo_regulator_remove(struct snd_soc_codec *codec)
+{
+ return 0;
+}
+#endif
+
+/*
+ * set dac bias
+ * common state changes:
+ * startup:
+ * off --> standby --> prepare --> on
+ * standby --> prepare --> on
+ *
+ * stop:
+ * on --> prepare --> standby
+ */
+static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ int ret;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(
+ ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ return ret;
+ udelay(10);
+
+ regcache_cache_only(sgtl5000->regmap, false);
+
+ ret = regcache_sync(sgtl5000->regmap);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to restore cache: %d\n", ret);
+
+ regcache_cache_only(sgtl5000->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+
+ return ret;
+ }
+ }
+
+ break;
+ case SND_SOC_BIAS_OFF:
+ regcache_cache_only(sgtl5000->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ break;
+ }
+
+ codec->dapm.bias_level = level;
+ return 0;
+}
+
+#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops sgtl5000_ops = {
+ .hw_params = sgtl5000_pcm_hw_params,
+ .digital_mute = sgtl5000_digital_mute,
+ .set_fmt = sgtl5000_set_dai_fmt,
+ .set_sysclk = sgtl5000_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver sgtl5000_dai = {
+ .name = "sgtl5000",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ /*
+ * only support 8~48K + 96K,
+ * TODO modify hw_param to support more
+ */
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .ops = &sgtl5000_ops,
+ .symmetric_rates = 1,
+};
+
+static bool sgtl5000_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SGTL5000_CHIP_ID:
+ case SGTL5000_CHIP_ADCDAC_CTRL:
+ case SGTL5000_CHIP_ANA_STATUS:
+ return true;
+ }
+
+ return false;
+}
+
+static bool sgtl5000_readable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SGTL5000_CHIP_ID:
+ case SGTL5000_CHIP_DIG_POWER:
+ case SGTL5000_CHIP_CLK_CTRL:
+ case SGTL5000_CHIP_I2S_CTRL:
+ case SGTL5000_CHIP_SSS_CTRL:
+ case SGTL5000_CHIP_ADCDAC_CTRL:
+ case SGTL5000_CHIP_DAC_VOL:
+ case SGTL5000_CHIP_PAD_STRENGTH:
+ case SGTL5000_CHIP_ANA_ADC_CTRL:
+ case SGTL5000_CHIP_ANA_HP_CTRL:
+ case SGTL5000_CHIP_ANA_CTRL:
+ case SGTL5000_CHIP_LINREG_CTRL:
+ case SGTL5000_CHIP_REF_CTRL:
+ case SGTL5000_CHIP_MIC_CTRL:
+ case SGTL5000_CHIP_LINE_OUT_CTRL:
+ case SGTL5000_CHIP_LINE_OUT_VOL:
+ case SGTL5000_CHIP_ANA_POWER:
+ case SGTL5000_CHIP_PLL_CTRL:
+ case SGTL5000_CHIP_CLK_TOP_CTRL:
+ case SGTL5000_CHIP_ANA_STATUS:
+ case SGTL5000_CHIP_SHORT_CTRL:
+ case SGTL5000_CHIP_ANA_TEST2:
+ case SGTL5000_DAP_CTRL:
+ case SGTL5000_DAP_PEQ:
+ case SGTL5000_DAP_BASS_ENHANCE:
+ case SGTL5000_DAP_BASS_ENHANCE_CTRL:
+ case SGTL5000_DAP_AUDIO_EQ:
+ case SGTL5000_DAP_SURROUND:
+ case SGTL5000_DAP_FLT_COEF_ACCESS:
+ case SGTL5000_DAP_COEF_WR_B0_MSB:
+ case SGTL5000_DAP_COEF_WR_B0_LSB:
+ case SGTL5000_DAP_EQ_BASS_BAND0:
+ case SGTL5000_DAP_EQ_BASS_BAND1:
+ case SGTL5000_DAP_EQ_BASS_BAND2:
+ case SGTL5000_DAP_EQ_BASS_BAND3:
+ case SGTL5000_DAP_EQ_BASS_BAND4:
+ case SGTL5000_DAP_MAIN_CHAN:
+ case SGTL5000_DAP_MIX_CHAN:
+ case SGTL5000_DAP_AVC_CTRL:
+ case SGTL5000_DAP_AVC_THRESHOLD:
+ case SGTL5000_DAP_AVC_ATTACK:
+ case SGTL5000_DAP_AVC_DECAY:
+ case SGTL5000_DAP_COEF_WR_B1_MSB:
+ case SGTL5000_DAP_COEF_WR_B1_LSB:
+ case SGTL5000_DAP_COEF_WR_B2_MSB:
+ case SGTL5000_DAP_COEF_WR_B2_LSB:
+ case SGTL5000_DAP_COEF_WR_A1_MSB:
+ case SGTL5000_DAP_COEF_WR_A1_LSB:
+ case SGTL5000_DAP_COEF_WR_A2_MSB:
+ case SGTL5000_DAP_COEF_WR_A2_LSB:
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+/*
+ * sgtl5000 has 3 internal power supplies:
+ * 1. VAG, normally set to vdda/2
+ * 2. charge pump, set to different value
+ * according to voltage of vdda and vddio
+ * 3. line out VAG, normally set to vddio/2
+ *
+ * and should be set according to:
+ * 1. vddd provided by external or not
+ * 2. vdda and vddio voltage value. > 3.1v or not
+ * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
+ */
+static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
+{
+ int vddd;
+ int vdda;
+ int vddio;
+ u16 ana_pwr;
+ u16 lreg_ctrl;
+ int vag;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
+ vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
+ vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
+
+ vdda = vdda / 1000;
+ vddio = vddio / 1000;
+ vddd = vddd / 1000;
+
+ if (vdda <= 0 || vddio <= 0 || vddd < 0) {
+ dev_err(codec->dev, "regulator voltage not set correctly\n");
+
+ return -EINVAL;
+ }
+
+ /* according to datasheet, maximum voltage of supplies */
+ if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
+ dev_err(codec->dev,
+ "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
+ vdda, vddio, vddd);
+
+ return -EINVAL;
+ }
+
+ /* reset value */
+ ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
+ ana_pwr |= SGTL5000_DAC_STEREO |
+ SGTL5000_ADC_STEREO |
+ SGTL5000_REFTOP_POWERUP;
+ lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
+
+ if (vddio < 3100 && vdda < 3100) {
+ /* enable internal oscillator used for charge pump */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INT_OSC_EN,
+ SGTL5000_INT_OSC_EN);
+ /* Enable VDDC charge pump */
+ ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
+ } else if (vddio >= 3100 && vdda >= 3100) {
+ ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
+ /* VDDC use VDDIO rail */
+ lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+ lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+ SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+
+ /* set voltage to register */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ SGTL5000_LINREG_VDDD_MASK, 0x8);
+
+ /*
+ * if vddd linear reg has been enabled,
+ * simple digital supply should be clear to get
+ * proper VDDD voltage.
+ */
+ if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP,
+ 0);
+ else
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP |
+ SGTL5000_STARTUP_POWERUP,
+ 0);
+
+ /*
+ * set ADC/DAC VAG to vdda / 2,
+ * should stay in range (0.8v, 1.575v)
+ */
+ vag = vdda / 2;
+ if (vag <= SGTL5000_ANA_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
+ (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
+ vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
+ else
+ vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
+
+ /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
+ vag = vddio / 2;
+ if (vag <= SGTL5000_LINE_OUT_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+ SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
+ vag = SGTL5000_LINE_OUT_GND_MAX;
+ else
+ vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+ SGTL5000_LINE_OUT_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ SGTL5000_LINE_OUT_CURRENT_MASK |
+ SGTL5000_LINE_OUT_GND_MASK,
+ vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ SGTL5000_LINE_OUT_CURRENT_360u <<
+ SGTL5000_LINE_OUT_CURRENT_SHIFT);
+
+ return 0;
+}
+
+static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ /* set internal ldo to 1.2v */
+ ret = ldo_regulator_register(codec, &ldo_init_data, LDO_VOLTAGE);
+ if (ret) {
+ dev_err(codec->dev,
+ "Failed to register vddd internal supplies: %d\n", ret);
+ return ret;
+ }
+
+ sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
+
+ dev_info(codec->dev, "Using internal LDO instead of VDDD\n");
+ return 0;
+}
+
+static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
+{
+ int ret;
+ int i;
+ int external_vddd = 0;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct regulator *vddd;
+
+ for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
+ sgtl5000->supplies[i].supply = supply_names[i];
+
+ /* External VDDD only works before revision 0x11 */
+ if (sgtl5000->revision < 0x11) {
+ vddd = regulator_get_optional(codec->dev, "VDDD");
+ if (IS_ERR(vddd)) {
+ /* See if it's just not registered yet */
+ if (PTR_ERR(vddd) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ } else {
+ external_vddd = 1;
+ regulator_put(vddd);
+ }
+ }
+
+ if (!external_vddd) {
+ ret = sgtl5000_replace_vddd_with_ldo(codec);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ goto err_ldo_remove;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ goto err_regulator_free;
+
+ /* wait for all power rails bring up */
+ udelay(10);
+
+ return 0;
+
+err_regulator_free:
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+err_ldo_remove:
+ if (!external_vddd)
+ ldo_regulator_remove(codec);
+ return ret;
+
+}
+
+static int sgtl5000_probe(struct snd_soc_codec *codec)
+{
+ int ret;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ ret = sgtl5000_enable_regulators(codec);
+ if (ret)
+ return ret;
+
+ /* power up sgtl5000 */
+ ret = sgtl5000_set_power_regs(codec);
+ if (ret)
+ goto err;
+
+ /* enable small pop, introduce 400ms delay in turning off */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ SGTL5000_SMALL_POP, 1);
+
+ /* disable short cut detector */
+ snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
+
+ /*
+ * set i2s as default input of sound switch
+ * TODO: add sound switch to control and dapm widge.
+ */
+ snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
+ SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
+ snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
+ SGTL5000_ADC_EN | SGTL5000_DAC_EN);
+
+ /* enable dac volume ramp by default */
+ snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ SGTL5000_DAC_VOL_RAMP_EN |
+ SGTL5000_DAC_MUTE_RIGHT |
+ SGTL5000_DAC_MUTE_LEFT);
+
+ snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_HP_ZCD_EN |
+ SGTL5000_ADC_ZCD_EN);
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_MASK,
+ sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_MASK,
+ sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
+ /*
+ * disable DAP
+ * TODO:
+ * Enable DAP in kcontrol and dapm.
+ */
+ snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
+
+ return 0;
+
+err:
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ ldo_regulator_remove(codec);
+
+ return ret;
+}
+
+static int sgtl5000_remove(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ ldo_regulator_remove(codec);
+
+ return 0;
+}
+
+static struct snd_soc_codec_driver sgtl5000_driver = {
+ .probe = sgtl5000_probe,
+ .remove = sgtl5000_remove,
+ .set_bias_level = sgtl5000_set_bias_level,
+ .suspend_bias_off = true,
+ .controls = sgtl5000_snd_controls,
+ .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
+ .dapm_widgets = sgtl5000_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
+ .dapm_routes = sgtl5000_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
+};
+
+static const struct regmap_config sgtl5000_regmap = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .reg_stride = 2,
+
+ .max_register = SGTL5000_MAX_REG_OFFSET,
+ .volatile_reg = sgtl5000_volatile,
+ .readable_reg = sgtl5000_readable,
+
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = sgtl5000_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
+};
+
+/*
+ * Write all the default values from sgtl5000_reg_defaults[] array into the
+ * sgtl5000 registers, to make sure we always start with the sane registers
+ * values as stated in the datasheet.
+ *
+ * Since sgtl5000 does not have a reset line, nor a reset command in software,
+ * we follow this approach to guarantee we always start from the default values
+ * and avoid problems like, not being able to probe after an audio playback
+ * followed by a system reset or a 'reboot' command in Linux
+ */
+static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000)
+{
+ int i, ret, val, index;
+
+ for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) {
+ val = sgtl5000_reg_defaults[i].def;
+ index = sgtl5000_reg_defaults[i].reg;
+ ret = regmap_write(sgtl5000->regmap, index, val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sgtl5000_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sgtl5000_priv *sgtl5000;
+ int ret, reg, rev;
+ struct device_node *np = client->dev.of_node;
+ u32 value;
+
+ sgtl5000 = devm_kzalloc(&client->dev, sizeof(*sgtl5000), GFP_KERNEL);
+ if (!sgtl5000)
+ return -ENOMEM;
+
+ sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap);
+ if (IS_ERR(sgtl5000->regmap)) {
+ ret = PTR_ERR(sgtl5000->regmap);
+ dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ sgtl5000->mclk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(sgtl5000->mclk)) {
+ ret = PTR_ERR(sgtl5000->mclk);
+ dev_err(&client->dev, "Failed to get mclock: %d\n", ret);
+ /* Defer the probe to see if the clk will be provided later */
+ if (ret == -ENOENT)
+ return -EPROBE_DEFER;
+ return ret;
+ }
+
+ ret = clk_prepare_enable(sgtl5000->mclk);
+ if (ret)
+ return ret;
+
+ /* Need 8 clocks before I2C accesses */
+ udelay(1);
+
+ /* read chip information */
+ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®);
+ if (ret)
+ goto disable_clk;
+
+ if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+ SGTL5000_PARTID_PART_ID) {
+ dev_err(&client->dev,
+ "Device with ID register %x is not a sgtl5000\n", reg);
+ ret = -ENODEV;
+ goto disable_clk;
+ }
+
+ rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+ dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev);
+ sgtl5000->revision = rev;
+
+ if (np) {
+ if (!of_property_read_u32(np,
+ "micbias-resistor-k-ohms", &value)) {
+ switch (value) {
+ case SGTL5000_MICBIAS_OFF:
+ sgtl5000->micbias_resistor = 0;
+ break;
+ case SGTL5000_MICBIAS_2K:
+ sgtl5000->micbias_resistor = 1;
+ break;
+ case SGTL5000_MICBIAS_4K:
+ sgtl5000->micbias_resistor = 2;
+ break;
+ case SGTL5000_MICBIAS_8K:
+ sgtl5000->micbias_resistor = 3;
+ break;
+ default:
+ sgtl5000->micbias_resistor = 2;
+ dev_err(&client->dev,
+ "Unsuitable MicBias resistor\n");
+ }
+ } else {
+ /* default is 4Kohms */
+ sgtl5000->micbias_resistor = 2;
+ }
+ if (!of_property_read_u32(np,
+ "micbias-voltage-m-volts", &value)) {
+ /* 1250mV => 0 */
+ /* steps of 250mV */
+ if ((value >= 1250) && (value <= 3000))
+ sgtl5000->micbias_voltage = (value / 250) - 5;
+ else {
+ sgtl5000->micbias_voltage = 0;
+ dev_err(&client->dev,
+ "Unsuitable MicBias resistor\n");
+ }
+ } else {
+ sgtl5000->micbias_voltage = 0;
+ }
+ }
+
+ i2c_set_clientdata(client, sgtl5000);
+
+ /* Ensure sgtl5000 will start with sane register values */
+ ret = sgtl5000_fill_defaults(sgtl5000);
+ if (ret)
+ goto disable_clk;
+
+ ret = snd_soc_register_codec(&client->dev,
+ &sgtl5000_driver, &sgtl5000_dai, 1);
+ if (ret)
+ goto disable_clk;
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(sgtl5000->mclk);
+ return ret;
+}
+
+static int sgtl5000_i2c_remove(struct i2c_client *client)
+{
+ struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&client->dev);
+ clk_disable_unprepare(sgtl5000->mclk);
+ return 0;
+}
+
+static const struct i2c_device_id sgtl5000_id[] = {
+ {"sgtl5000", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+
+static const struct of_device_id sgtl5000_dt_ids[] = {
+ { .compatible = "fsl,sgtl5000", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
+
+static struct i2c_driver sgtl5000_i2c_driver = {
+ .driver = {
+ .name = "sgtl5000",
+ .owner = THIS_MODULE,
+ .of_match_table = sgtl5000_dt_ids,
+ },
+ .probe = sgtl5000_i2c_probe,
+ .remove = sgtl5000_i2c_remove,
+ .id_table = sgtl5000_id,
+};
+
+module_i2c_driver(sgtl5000_i2c_driver);
+
+MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
+MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff