Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / sound / soc / codecs / rt5677-spi.c
diff --git a/kernel/sound/soc/codecs/rt5677-spi.c b/kernel/sound/soc/codecs/rt5677-spi.c
new file mode 100644 (file)
index 0000000..ef6348c
--- /dev/null
@@ -0,0 +1,130 @@
+/*
+ * rt5677-spi.c  --  RT5677 ALSA SoC audio codec driver
+ *
+ * Copyright 2013 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_qos.h>
+#include <linux/sysfs.h>
+#include <linux/clk.h>
+#include <linux/firmware.h>
+
+#include "rt5677-spi.h"
+
+static struct spi_device *g_spi;
+
+/**
+ * rt5677_spi_write - Write data to SPI.
+ * @txbuf: Data Buffer for writing.
+ * @len: Data length.
+ *
+ *
+ * Returns true for success.
+ */
+int rt5677_spi_write(u8 *txbuf, size_t len)
+{
+       int status;
+
+       status = spi_write(g_spi, txbuf, len);
+
+       if (status)
+               dev_err(&g_spi->dev, "rt5677_spi_write error %d\n", status);
+
+       return status;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_write);
+
+/**
+ * rt5677_spi_burst_write - Write data to SPI by rt5677 dsp memory address.
+ * @addr: Start address.
+ * @txbuf: Data Buffer for writng.
+ * @len: Data length, it must be a multiple of 8.
+ *
+ *
+ * Returns true for success.
+ */
+int rt5677_spi_burst_write(u32 addr, const struct firmware *fw)
+{
+       u8 spi_cmd = RT5677_SPI_CMD_BURST_WRITE;
+       u8 *write_buf;
+       unsigned int i, end, offset = 0;
+
+       write_buf = kmalloc(RT5677_SPI_BUF_LEN + 6, GFP_KERNEL);
+
+       if (write_buf == NULL)
+               return -ENOMEM;
+
+       while (offset < fw->size) {
+               if (offset + RT5677_SPI_BUF_LEN <= fw->size)
+                       end = RT5677_SPI_BUF_LEN;
+               else
+                       end = fw->size % RT5677_SPI_BUF_LEN;
+
+               write_buf[0] = spi_cmd;
+               write_buf[1] = ((addr + offset) & 0xff000000) >> 24;
+               write_buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
+               write_buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
+               write_buf[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+               for (i = 0; i < end; i += 8) {
+                       write_buf[i + 12] = fw->data[offset + i + 0];
+                       write_buf[i + 11] = fw->data[offset + i + 1];
+                       write_buf[i + 10] = fw->data[offset + i + 2];
+                       write_buf[i +  9] = fw->data[offset + i + 3];
+                       write_buf[i +  8] = fw->data[offset + i + 4];
+                       write_buf[i +  7] = fw->data[offset + i + 5];
+                       write_buf[i +  6] = fw->data[offset + i + 6];
+                       write_buf[i +  5] = fw->data[offset + i + 7];
+               }
+
+               write_buf[end + 5] = spi_cmd;
+
+               rt5677_spi_write(write_buf, end + 6);
+
+               offset += RT5677_SPI_BUF_LEN;
+       }
+
+       kfree(write_buf);
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_burst_write);
+
+static int rt5677_spi_probe(struct spi_device *spi)
+{
+       g_spi = spi;
+       return 0;
+}
+
+static struct spi_driver rt5677_spi_driver = {
+       .driver = {
+               .name = "rt5677",
+               .owner = THIS_MODULE,
+       },
+       .probe = rt5677_spi_probe,
+};
+module_spi_driver(rt5677_spi_driver);
+
+MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
+MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
+MODULE_LICENSE("GPL v2");