--- /dev/null
+config SND_BF5XX_I2S
+ tristate "SoC I2S Audio for the ADI Blackfin chip"
+ depends on BLACKFIN
+ select SND_BF5XX_SOC_SPORT if !BF60x
+ select SND_BF6XX_SOC_SPORT if BF60x
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in I2S
+ mode (supports single stereo In/Out).
+ You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_SSM2602
+ tristate "SoC SSM2602 Audio Codec Add-On Card support"
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
+ select SND_BF5XX_SOC_I2S if !BF60x
+ select SND_BF6XX_SOC_I2S if BF60x
+ select SND_SOC_SSM2602_SPI if SPI_MASTER
+ select SND_SOC_SSM2602_I2C if I2C
+ help
+ Say Y if you want to add support for the Analog Devices
+ SSM2602 Audio Codec Add-On Card.
+
+config SND_SOC_BFIN_EVAL_ADAU1701
+ tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && I2C
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1701
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+config SND_SOC_BFIN_EVAL_ADAU1373
+ tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && I2C
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1373
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that first ADAU1373 DAI is connected to the
+ first SPORT port on the BF5XX board.
+
+config SND_SOC_BFIN_EVAL_ADAU1X61
+ tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && I2C
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1761_I2C
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that the ADAU1X61 is connected to the
+ first SPORT port on the BF5XX board.
+
+config SND_SOC_BFIN_EVAL_ADAU1X81
+ tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && I2C
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1781_I2C
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that the ADAU1X81 is connected to the
+ first SPORT port on the BF5XX board.
+
+config SND_SOC_BFIN_EVAL_ADAV80X
+ tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAV801 if SPI_MASTER
+ select SND_SOC_ADAV803 if I2C
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
+ EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
+ like the BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that the ADAV80X digital record and playback
+ interfaces are connected to the first SPORT port on the BF5XX board.
+
+config SND_BF5XX_SOC_AD1836
+ tristate "SoC AD1836 Audio support for BF5xx"
+ depends on SND_BF5XX_I2S && SPI_MASTER
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_AD1836
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD193X
+ tristate "SoC AD193X Audio support for Blackfin"
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_AD193X_I2C if I2C
+ select SND_SOC_AD193X_SPI if SPI_MASTER
+ help
+ Say Y if you want to add support for AD193X codec on Blackfin.
+ This driver supports AD1936, AD1937, AD1938 and AD1939.
+
+config SND_BF5XX_SOC_AD73311
+ tristate "SoC AD73311 Audio support for Blackfin"
+ depends on SND_BF5XX_I2S
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_AD73311
+ help
+ Say Y if you want to add support for AD73311 codec on Blackfin.
+
+config SND_BFIN_AD73311_SE
+ int "PF pin for AD73311L Chip Select"
+ depends on SND_BF5XX_SOC_AD73311
+ default 4
+ help
+ Enter the GPIO used to control AD73311's SE pin. Acceptable
+ values are 0 to 7
+
+config SND_BF5XX_AC97
+ tristate "SoC AC97 Audio for the ADI BF5xx chip"
+ depends on BLACKFIN
+ select AC97_BUS
+ select SND_SOC_AC97_BUS
+ select SND_BF5XX_SOC_SPORT
+ select SND_BF5XX_SOC_AC97
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in slot 16
+ mode (pseudo AC97 interface).
+ You will also need to select the audio interfaces to support below.
+
+ Note:
+ AC97 codecs which do not implement the slot-16 mode will not function
+ properly with this driver. This driver is known to work with the
+ Analog Devices line of AC97 codecs.
+
+config SND_BF5XX_MMAP_SUPPORT
+ bool "Enable MMAP Support"
+ depends on SND_BF5XX_AC97
+ default y
+ help
+ Say y if you want AC97 driver to support mmap mode.
+ We introduce an intermediate buffer to simulate mmap.
+
+config SND_BF5XX_MULTICHAN_SUPPORT
+ bool "Enable Multichannel Support"
+ depends on SND_BF5XX_AC97
+ default n
+ help
+ Say y if you want AC97 driver to support up to 5.1 channel audio.
+ this mode will consume much more memory for DMA.
+
+config SND_BF5XX_HAVE_COLD_RESET
+ bool "BOARD has COLD Reset GPIO"
+ depends on SND_BF5XX_AC97
+ default y if BFIN548_EZKIT
+ default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+ int "Set a GPIO for cold reset"
+ depends on SND_BF5XX_HAVE_COLD_RESET
+ range 0 159
+ default 19 if BFIN548_EZKIT
+ default 5 if BFIN537_STAMP
+ default 0
+ help
+ Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+ tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
+ depends on SND_BF5XX_AC97
+ select SND_BF5XX_SOC_AC97
+ select SND_SOC_AD1980
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+ Warning:
+ Because Analog Devices Inc. discontinued the ad1980 sound chip since
+ Sep. 2009, this ad1980 driver is not maintained, tested and supported
+ by ADI now.
+
+config SND_BF5XX_SOC_SPORT
+ tristate
+
+config SND_BF6XX_SOC_SPORT
+ tristate
+
+config SND_BF5XX_SOC_I2S
+ tristate
+
+config SND_BF6XX_SOC_I2S
+ tristate
+
+config SND_BF5XX_SOC_AC97
+ tristate
+
+config SND_BF5XX_SPORT_NUM
+ int "Set a SPORT for Sound chip"
+ depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
+ range 0 3 if BF54x
+ range 0 1 if !BF54x
+ default 0
+ help
+ Set the correct SPORT for sound chip.
Code Review / kvmfornfv.git / blobdiff