--- /dev/null
+/* Analog Devices 1889 audio driver
+ * Copyright (C) 2004, Kyle McMartin <kyle@parisc-linux.org>
+ */
+
+#ifndef __AD1889_H__
+#define __AD1889_H__
+
+#define AD_DS_WSMC 0x00 /* wave/synthesis channel mixer control */
+#define AD_DS_WSMC_SYEN 0x0004 /* synthesis channel enable */
+#define AD_DS_WSMC_SYRQ 0x0030 /* synth. fifo request point */
+#define AD_DS_WSMC_WA16 0x0100 /* wave channel 16bit select */
+#define AD_DS_WSMC_WAST 0x0200 /* wave channel stereo select */
+#define AD_DS_WSMC_WAEN 0x0400 /* wave channel enable */
+#define AD_DS_WSMC_WARQ 0x3000 /* wave fifo request point */
+
+#define AD_DS_RAMC 0x02 /* resampler/ADC channel mixer control */
+#define AD_DS_RAMC_AD16 0x0001 /* ADC channel 16bit select */
+#define AD_DS_RAMC_ADST 0x0002 /* ADC channel stereo select */
+#define AD_DS_RAMC_ADEN 0x0004 /* ADC channel enable */
+#define AD_DS_RAMC_ACRQ 0x0030 /* ADC fifo request point */
+#define AD_DS_RAMC_REEN 0x0400 /* resampler channel enable */
+#define AD_DS_RAMC_RERQ 0x3000 /* res. fifo request point */
+
+#define AD_DS_WADA 0x04 /* wave channel mix attenuation */
+#define AD_DS_WADA_RWAM 0x0080 /* right wave mute */
+#define AD_DS_WADA_RWAA 0x001f /* right wave attenuation */
+#define AD_DS_WADA_LWAM 0x8000 /* left wave mute */
+#define AD_DS_WADA_LWAA 0x3e00 /* left wave attenuation */
+
+#define AD_DS_SYDA 0x06 /* synthesis channel mix attenuation */
+#define AD_DS_SYDA_RSYM 0x0080 /* right synthesis mute */
+#define AD_DS_SYDA_RSYA 0x001f /* right synthesis attenuation */
+#define AD_DS_SYDA_LSYM 0x8000 /* left synthesis mute */
+#define AD_DS_SYDA_LSYA 0x3e00 /* left synthesis attenuation */
+
+#define AD_DS_WAS 0x08 /* wave channel sample rate */
+#define AD_DS_WAS_WAS 0xffff /* sample rate mask */
+
+#define AD_DS_RES 0x0a /* resampler channel sample rate */
+#define AD_DS_RES_RES 0xffff /* sample rate mask */
+
+#define AD_DS_CCS 0x0c /* chip control/status */
+#define AD_DS_CCS_ADO 0x0001 /* ADC channel overflow */
+#define AD_DS_CCS_REO 0x0002 /* resampler channel overflow */
+#define AD_DS_CCS_SYU 0x0004 /* synthesis channel underflow */
+#define AD_DS_CCS_WAU 0x0008 /* wave channel underflow */
+/* bits 4 -> 7, 9, 11 -> 14 reserved */
+#define AD_DS_CCS_XTD 0x0100 /* xtd delay control (4096 clock cycles) */
+#define AD_DS_CCS_PDALL 0x0400 /* power */
+#define AD_DS_CCS_CLKEN 0x8000 /* clock */
+
+#define AD_DMA_RESBA 0x40 /* RES base address */
+#define AD_DMA_RESCA 0x44 /* RES current address */
+#define AD_DMA_RESBC 0x48 /* RES base count */
+#define AD_DMA_RESCC 0x4c /* RES current count */
+
+#define AD_DMA_ADCBA 0x50 /* ADC base address */
+#define AD_DMA_ADCCA 0x54 /* ADC current address */
+#define AD_DMA_ADCBC 0x58 /* ADC base count */
+#define AD_DMA_ADCCC 0x5c /* ADC current count */
+
+#define AD_DMA_SYNBA 0x60 /* synth base address */
+#define AD_DMA_SYNCA 0x64 /* synth current address */
+#define AD_DMA_SYNBC 0x68 /* synth base count */
+#define AD_DMA_SYNCC 0x6c /* synth current count */
+
+#define AD_DMA_WAVBA 0x70 /* wave base address */
+#define AD_DMA_WAVCA 0x74 /* wave current address */
+#define AD_DMA_WAVBC 0x78 /* wave base count */
+#define AD_DMA_WAVCC 0x7c /* wave current count */
+
+#define AD_DMA_RESIC 0x80 /* RES dma interrupt current byte count */
+#define AD_DMA_RESIB 0x84 /* RES dma interrupt base byte count */
+
+#define AD_DMA_ADCIC 0x88 /* ADC dma interrupt current byte count */
+#define AD_DMA_ADCIB 0x8c /* ADC dma interrupt base byte count */
+
+#define AD_DMA_SYNIC 0x90 /* synth dma interrupt current byte count */
+#define AD_DMA_SYNIB 0x94 /* synth dma interrupt base byte count */
+
+#define AD_DMA_WAVIC 0x98 /* wave dma interrupt current byte count */
+#define AD_DMA_WAVIB 0x9c /* wave dma interrupt base byte count */
+
+#define AD_DMA_ICC 0xffffff /* current byte count mask */
+#define AD_DMA_IBC 0xffffff /* base byte count mask */
+/* bits 24 -> 31 reserved */
+
+/* 4 bytes pad */
+#define AD_DMA_ADC 0xa8 /* ADC dma control and status */
+#define AD_DMA_SYNTH 0xb0 /* Synth dma control and status */
+#define AD_DMA_WAV 0xb8 /* wave dma control and status */
+#define AD_DMA_RES 0xa0 /* Resample dma control and status */
+
+#define AD_DMA_SGDE 0x0001 /* SGD mode enable */
+#define AD_DMA_LOOP 0x0002 /* loop enable */
+#define AD_DMA_IM 0x000c /* interrupt mode mask */
+#define AD_DMA_IM_DIS (~AD_DMA_IM) /* disable */
+#define AD_DMA_IM_CNT 0x0004 /* interrupt on count */
+#define AD_DMA_IM_SGD 0x0008 /* interrupt on SGD flag */
+#define AD_DMA_IM_EOL 0x000c /* interrupt on End of Linked List */
+#define AD_DMA_SGDS 0x0030 /* SGD status */
+#define AD_DMA_SFLG 0x0040 /* SGD flag */
+#define AD_DMA_EOL 0x0080 /* SGD end of list */
+/* bits 8 -> 15 reserved */
+
+#define AD_DMA_DISR 0xc0 /* dma interrupt status */
+#define AD_DMA_DISR_RESI 0x000001 /* resampler channel interrupt */
+#define AD_DMA_DISR_ADCI 0x000002 /* ADC channel interrupt */
+#define AD_DMA_DISR_SYNI 0x000004 /* synthesis channel interrupt */
+#define AD_DMA_DISR_WAVI 0x000008 /* wave channel interrupt */
+/* bits 4, 5 reserved */
+#define AD_DMA_DISR_SEPS 0x000040 /* serial eeprom status */
+/* bits 7 -> 13 reserved */
+#define AD_DMA_DISR_PMAI 0x004000 /* pci master abort interrupt */
+#define AD_DMA_DISR_PTAI 0x008000 /* pci target abort interrupt */
+#define AD_DMA_DISR_PTAE 0x010000 /* pci target abort interrupt enable */
+#define AD_DMA_DISR_PMAE 0x020000 /* pci master abort interrupt enable */
+/* bits 19 -> 31 reserved */
+
+/* interrupt mask */
+#define AD_INTR_MASK (AD_DMA_DISR_RESI|AD_DMA_DISR_ADCI| \
+ AD_DMA_DISR_WAVI|AD_DMA_DISR_SYNI| \
+ AD_DMA_DISR_PMAI|AD_DMA_DISR_PTAI)
+
+#define AD_DMA_CHSS 0xc4 /* dma channel stop status */
+#define AD_DMA_CHSS_RESS 0x000001 /* resampler channel stopped */
+#define AD_DMA_CHSS_ADCS 0x000002 /* ADC channel stopped */
+#define AD_DMA_CHSS_SYNS 0x000004 /* synthesis channel stopped */
+#define AD_DMA_CHSS_WAVS 0x000008 /* wave channel stopped */
+
+#define AD_GPIO_IPC 0xc8 /* gpio port control */
+#define AD_GPIO_OP 0xca /* gpio output port status */
+#define AD_GPIO_IP 0xcc /* gpio input port status */
+
+#define AD_AC97_BASE 0x100 /* ac97 base register */
+
+#define AD_AC97_RESET 0x100 /* reset */
+
+#define AD_AC97_PWR_CTL 0x126 /* == AC97_POWERDOWN */
+#define AD_AC97_PWR_ADC 0x0001 /* ADC ready status */
+#define AD_AC97_PWR_DAC 0x0002 /* DAC ready status */
+#define AD_AC97_PWR_PR0 0x0100 /* PR0 (ADC) powerdown */
+#define AD_AC97_PWR_PR1 0x0200 /* PR1 (DAC) powerdown */
+
+#define AD_MISC_CTL 0x176 /* misc control */
+#define AD_MISC_CTL_DACZ 0x8000 /* set for zero fill, unset for repeat */
+#define AD_MISC_CTL_ARSR 0x0001 /* set for SR1, unset for SR0 */
+#define AD_MISC_CTL_ALSR 0x0100
+#define AD_MISC_CTL_DLSR 0x0400
+#define AD_MISC_CTL_DRSR 0x0004
+
+#define AD_AC97_SR0 0x178 /* sample rate 0, 0xbb80 == 48K */
+#define AD_AC97_SR0_48K 0xbb80 /* 48KHz */
+#define AD_AC97_SR1 0x17a /* sample rate 1 */
+
+#define AD_AC97_ACIC 0x180 /* ac97 codec interface control */
+#define AD_AC97_ACIC_ACIE 0x0001 /* analog codec interface enable */
+#define AD_AC97_ACIC_ACRD 0x0002 /* analog codec reset disable */
+#define AD_AC97_ACIC_ASOE 0x0004 /* audio stream output enable */
+#define AD_AC97_ACIC_VSRM 0x0008 /* variable sample rate mode */
+#define AD_AC97_ACIC_FSDH 0x0100 /* force SDATA_OUT high */
+#define AD_AC97_ACIC_FSYH 0x0200 /* force sync high */
+#define AD_AC97_ACIC_ACRDY 0x8000 /* analog codec ready status */
+/* bits 10 -> 14 reserved */
+
+
+#define AD_DS_MEMSIZE 512
+#define AD_OPL_MEMSIZE 16
+#define AD_MIDI_MEMSIZE 16
+
+#define AD_WAV_STATE 0
+#define AD_ADC_STATE 1
+#define AD_MAX_STATES 2
+
+#define AD_CHAN_WAV 0x0001
+#define AD_CHAN_ADC 0x0002
+#define AD_CHAN_RES 0x0004
+#define AD_CHAN_SYN 0x0008
+
+
+/* The chip would support 4 GB buffers and 16 MB periods,
+ * but let's not overdo it ... */
+#define BUFFER_BYTES_MAX (256 * 1024)
+#define PERIOD_BYTES_MIN 32
+#define PERIOD_BYTES_MAX (BUFFER_BYTES_MAX / 2)
+#define PERIODS_MIN 2
+#define PERIODS_MAX (BUFFER_BYTES_MAX / PERIOD_BYTES_MIN)
+
+#endif /* __AD1889_H__ */
Code Review / kvmfornfv.git / blobdiff