Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / sound / oss / waveartist.h

diff --git a/kernel/sound/oss/waveartist.h b/kernel/sound/oss/waveartist.h
new file mode 100644 (file)
index 0000000..dac4ca9
--- /dev/null
+++ b/kernel/sound/oss/waveartist.h
@@ -0,0 +1,92 @@
+/*
+ * linux/sound/oss/waveartist.h
+ *
+ * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
+ */
+
+//registers
+#define CMDR   0
+#define DATR   2
+#define CTLR   4
+#define        STATR   5
+#define        IRQSTAT 12
+
+//bit defs
+//reg STATR
+#define        CMD_WE  0x80
+#define        CMD_RF  0x40
+#define        DAT_WE  0x20
+#define        DAT_RF  0x10
+
+#define        IRQ_REQ 0x08
+#define        DMA1    0x04
+#define        DMA0    0x02
+
+//bit defs
+//reg CTLR
+#define        CMD_WEIE        0x80
+#define        CMD_RFIE        0x40
+#define        DAT_WEIE        0x20
+#define        DAT_RFIE        0x10
+
+#define        RESET   0x08
+#define        DMA1_IE 0x04
+#define        DMA0_IE 0x02
+#define        IRQ_ACK 0x01
+
+//commands
+
+#define        WACMD_SYSTEMID          0x00
+#define WACMD_GETREV           0x00
+#define        WACMD_INPUTFORMAT       0x10    //0-8S, 1-16S, 2-8U
+#define        WACMD_INPUTCHANNELS     0x11    //1-Mono, 2-Stereo
+#define        WACMD_INPUTSPEED        0x12    //sampling rate
+#define        WACMD_INPUTDMA          0x13    //0-8bit, 1-16bit, 2-PIO
+#define        WACMD_INPUTSIZE         0x14    //samples to interrupt
+#define        WACMD_INPUTSTART        0x15    //start ADC
+#define        WACMD_INPUTPAUSE        0x16    //pause ADC
+#define        WACMD_INPUTSTOP         0x17    //stop ADC
+#define        WACMD_INPUTRESUME       0x18    //resume ADC
+#define        WACMD_INPUTPIO          0x19    //PIO ADC
+
+#define        WACMD_OUTPUTFORMAT      0x20    //0-8S, 1-16S, 2-8U
+#define        WACMD_OUTPUTCHANNELS    0x21    //1-Mono, 2-Stereo
+#define        WACMD_OUTPUTSPEED       0x22    //sampling rate
+#define        WACMD_OUTPUTDMA         0x23    //0-8bit, 1-16bit, 2-PIO
+#define        WACMD_OUTPUTSIZE        0x24    //samples to interrupt
+#define        WACMD_OUTPUTSTART       0x25    //start ADC
+#define        WACMD_OUTPUTPAUSE       0x26    //pause ADC
+#define        WACMD_OUTPUTSTOP        0x27    //stop ADC
+#define        WACMD_OUTPUTRESUME      0x28    //resume ADC
+#define        WACMD_OUTPUTPIO         0x29    //PIO ADC
+
+#define        WACMD_GET_LEVEL         0x30
+#define        WACMD_SET_LEVEL         0x31
+#define        WACMD_SET_MIXER         0x32
+#define        WACMD_RST_MIXER         0x33
+#define        WACMD_SET_MONO          0x34
+
+/*
+ * Definitions for left/right recording input mux
+ */
+#define ADC_MUX_NONE   0
+#define ADC_MUX_MIXER  1
+#define ADC_MUX_LINE   2
+#define ADC_MUX_AUX2   3
+#define ADC_MUX_AUX1   4
+#define ADC_MUX_MIC    5
+
+/*
+ * Definitions for mixer gain settings
+ */
+#define MIX_GAIN_LINE  0       /* line in       */
+#define MIX_GAIN_AUX1  1       /* aux1          */
+#define MIX_GAIN_AUX2  2       /* aux2          */
+#define MIX_GAIN_XMIC  3       /* crossover mic */
+#define MIX_GAIN_MIC   4       /* normal mic    */
+#define MIX_GAIN_PREMIC        5       /* preamp mic    */
+#define MIX_GAIN_OUT   6       /* output        */
+#define MIX_GAIN_MONO  7       /* mono in       */
+
+int wa_sendcmd(unsigned int cmd);
+int wa_writecmd(unsigned int cmd, unsigned int arg);