Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / net / bridge / Kconfig

diff --git a/kernel/net/bridge/Kconfig b/kernel/net/bridge/Kconfig
new file mode 100644 (file)
index 0000000..aa0d3b2
--- /dev/null
+++ b/kernel/net/bridge/Kconfig
@@ -0,0 +1,62 @@
+#
+# 802.1d Ethernet Bridging
+#
+
+config BRIDGE
+       tristate "802.1d Ethernet Bridging"
+       select LLC
+       select STP
+       depends on IPV6 || IPV6=n
+       ---help---
+         If you say Y here, then your Linux box will be able to act as an
+         Ethernet bridge, which means that the different Ethernet segments it
+         is connected to will appear as one Ethernet to the participants.
+         Several such bridges can work together to create even larger
+         networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+         As this is a standard, Linux bridges will cooperate properly with
+         other third party bridge products.
+
+         In order to use the Ethernet bridge, you'll need the bridge
+         configuration tools; see <file:Documentation/networking/bridge.txt>
+         for location. Please read the Bridge mini-HOWTO for more
+         information.
+
+         If you enable iptables support along with the bridge support then you
+         turn your bridge into a bridging IP firewall.
+         iptables will then see the IP packets being bridged, so you need to
+         take this into account when setting up your firewall rules.
+         Enabling arptables support when bridging will let arptables see
+         bridged ARP traffic in the arptables FORWARD chain.
+
+         To compile this code as a module, choose M here: the module
+         will be called bridge.
+
+         If unsure, say N.
+
+config BRIDGE_IGMP_SNOOPING
+       bool "IGMP/MLD snooping"
+       depends on BRIDGE
+       depends on INET
+       default y
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able selectively
+         forward multicast traffic based on IGMP/MLD traffic received from
+         each port.
+
+         Say N to exclude this support and reduce the binary size.
+
+         If unsure, say Y.
+
+config BRIDGE_VLAN_FILTERING
+       bool "VLAN filtering"
+       depends on BRIDGE
+       depends on VLAN_8021Q
+       default n
+       ---help---
+         If you say Y here, then the Ethernet bridge will be able selectively
+         receive and forward traffic based on VLAN information in the packet
+         any VLAN information configured on the bridge port or bridge device.
+
+         Say N to exclude this support and reduce the binary size.
+
+         If unsure, say Y.