Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / net / atm / Kconfig

diff --git a/kernel/net/atm/Kconfig b/kernel/net/atm/Kconfig
new file mode 100644 (file)
index 0000000..754ea10
--- /dev/null
+++ b/kernel/net/atm/Kconfig
@@ -0,0 +1,73 @@
+#
+# Asynchronous Transfer Mode (ATM)
+#
+
+config ATM
+       tristate "Asynchronous Transfer Mode (ATM)"
+       ---help---
+         ATM is a high-speed networking technology for Local Area Networks
+         and Wide Area Networks.  It uses a fixed packet size and is
+         connection oriented, allowing for the negotiation of minimum
+         bandwidth requirements.
+
+         In order to participate in an ATM network, your Linux box needs an
+         ATM networking card. If you have that, say Y here and to the driver
+         of your ATM card below.
+
+         Note that you need a set of user-space programs to actually make use
+         of ATM.  See the file <file:Documentation/networking/atm.txt> for
+         further details.
+
+config ATM_CLIP
+       tristate "Classical IP over ATM"
+       depends on ATM && INET
+       help
+         Classical IP over ATM for PVCs and SVCs, supporting InARP and
+         ATMARP. If you want to communication with other IP hosts on your ATM
+         network, you will typically either say Y here or to "LAN Emulation
+         (LANE)" below.
+
+config ATM_CLIP_NO_ICMP
+       bool "Do NOT send ICMP if no neighbour"
+       depends on ATM_CLIP
+       help
+         Normally, an "ICMP host unreachable" message is sent if a neighbour
+         cannot be reached because there is no VC to it in the kernel's
+         ATMARP table. This may cause problems when ATMARP table entries are
+         briefly removed during revalidation. If you say Y here, packets to
+         such neighbours are silently discarded instead.
+
+config ATM_LANE
+       tristate "LAN Emulation (LANE) support"
+       depends on ATM
+       help
+         LAN Emulation emulates services of existing LANs across an ATM
+         network. Besides operating as a normal ATM end station client, Linux
+         LANE client can also act as an proxy client bridging packets between
+         ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+config ATM_MPOA
+       tristate "Multi-Protocol Over ATM (MPOA) support"
+       depends on ATM && INET && ATM_LANE!=n
+       help
+         Multi-Protocol Over ATM allows ATM edge devices such as routers,
+         bridges and ATM attached hosts establish direct ATM VCs across
+         subnetwork boundaries. These shortcut connections bypass routers
+         enhancing overall network performance.
+
+config ATM_BR2684
+       tristate "RFC1483/2684 Bridged protocols"
+       depends on ATM && INET
+       help
+         ATM PVCs can carry ethernet PDUs according to RFC2684 (formerly 1483)
+         This device will act like an ethernet from the kernels point of view,
+         with the traffic being carried by ATM PVCs (currently 1 PVC/device).
+         This is sometimes used over DSL lines.  If in doubt, say N.
+
+config ATM_BR2684_IPFILTER
+       bool "Per-VC IP filter kludge"
+       depends on ATM_BR2684
+       help
+         This is an experimental mechanism for users who need to terminate a
+         large number of IP-only vcc's.  Do not enable this unless you are sure
+         you know what you are doing.