Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / include / sound / aci.h

diff --git a/kernel/include/sound/aci.h b/kernel/include/sound/aci.h
new file mode 100644 (file)
index 0000000..ee639d3
--- /dev/null
+++ b/kernel/include/sound/aci.h
@@ -0,0 +1,90 @@
+#ifndef _ACI_H_
+#define _ACI_H_
+
+#define ACI_REG_COMMAND                0       /* write register offset */
+#define ACI_REG_STATUS         1       /* read register offset */
+#define ACI_REG_BUSY           2       /* busy register offset */
+#define ACI_REG_RDS            2       /* PCM20: RDS register offset */
+#define ACI_MINTIME            500     /* ACI time out limit */
+
+#define ACI_SET_MUTE           0x0d
+#define ACI_SET_POWERAMP       0x0f
+#define ACI_SET_TUNERMUTE      0xa3
+#define ACI_SET_TUNERMONO      0xa4
+#define ACI_SET_IDE            0xd0
+#define ACI_SET_WSS            0xd1
+#define ACI_SET_SOLOMODE       0xd2
+#define ACI_SET_PREAMP         0x03
+#define ACI_GET_PREAMP         0x21
+#define ACI_WRITE_TUNE         0xa7
+#define ACI_READ_TUNERSTEREO   0xa8
+#define ACI_READ_TUNERSTATION  0xa9
+#define ACI_READ_VERSION       0xf1
+#define ACI_READ_IDCODE                0xf2
+#define ACI_INIT               0xff
+#define ACI_STATUS             0xf0
+#define ACI_S_GENERAL          0x00
+#define ACI_ERROR_OP           0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+   Add an offset of 0x01 for the left channel register.
+   (left=right+0x01) */
+
+#define ACI_GET_MASTER         0x03
+#define ACI_GET_MIC            0x05
+#define ACI_GET_LINE           0x07
+#define ACI_GET_CD             0x09
+#define ACI_GET_SYNTH          0x0b
+#define ACI_GET_PCM            0x0d
+#define ACI_GET_LINE1          0x10    /* Radio on PCM20 */
+#define ACI_GET_LINE2          0x12
+
+#define ACI_GET_EQ1            0x22    /* from Bass ... */
+#define ACI_GET_EQ2            0x24
+#define ACI_GET_EQ3            0x26
+#define ACI_GET_EQ4            0x28
+#define ACI_GET_EQ5            0x2a
+#define ACI_GET_EQ6            0x2c
+#define ACI_GET_EQ7            0x2e    /* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+   For left channel access you have to add an offset of 0x08.
+   MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER         0x00
+#define ACI_SET_MIC            0x30
+#define ACI_SET_LINE           0x31
+#define ACI_SET_CD             0x34
+#define ACI_SET_SYNTH          0x33
+#define ACI_SET_PCM            0x32
+#define ACI_SET_LINE1          0x35    /* Radio on PCM20 */
+#define ACI_SET_LINE2          0x36
+
+#define ACI_SET_EQ1            0x40    /* from Bass ... */
+#define ACI_SET_EQ2            0x41
+#define ACI_SET_EQ3            0x42
+#define ACI_SET_EQ4            0x43
+#define ACI_SET_EQ5            0x44
+#define ACI_SET_EQ6            0x45
+#define ACI_SET_EQ7            0x46    /* ... to Treble */
+
+struct snd_miro_aci {
+       unsigned long aci_port;
+       int aci_vendor;
+       int aci_product;
+       int aci_version;
+       int aci_amp;
+       int aci_preamp;
+       int aci_solomode;
+
+       struct mutex aci_mutex;
+};
+
+int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3);
+
+struct snd_miro_aci *snd_aci_get_aci(void);
+
+#endif  /* _ACI_H_ */
+