--- /dev/null
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/delay.h> /* for delay-stuff */
+#include <linux/slab.h> /* for kmalloc/kfree */
+#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h> /* for "__init" */
+#include <linux/interrupt.h> /* for IMMEDIATE_BH */
+#include <linux/kmod.h> /* for kernel module loader */
+#include <linux/i2c.h> /* for i2c subsystem */
+#include <asm/io.h> /* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#include <linux/vmalloc.h> /* for vmalloc() */
+#include <linux/mm.h> /* for vmalloc_to_page() */
+
+#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr) readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+#ifndef DEBUG_VARIABLE
+ #define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...) \
+do { \
+ if (DEBUG_VARIABLE & mask) \
+ pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__)
+
+#define SAA7146_ISR_CLEAR(x,y) \
+ saa7146_write(x, ISR, (y));
+
+struct module;
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+ unsigned int size;
+ __le32 *cpu;
+ dma_addr_t dma;
+ /* used for offsets for u,v planes for planar capture modes */
+ unsigned long offset;
+ /* used for custom pagetables (used for example by budget dvb cards) */
+ struct scatterlist *slist;
+ int nents;
+};
+
+struct saa7146_pci_extension_data {
+ struct saa7146_extension *ext;
+ void *ext_priv; /* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \
+ { \
+ .vendor = PCI_VENDOR_ID_PHILIPS, \
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7146, \
+ .subvendor = x_vendor, \
+ .subdevice = x_device, \
+ .driver_data = (unsigned long)& x_var, \
+ }
+
+struct saa7146_extension
+{
+ char name[32]; /* name of the device */
+#define SAA7146_USE_I2C_IRQ 0x1
+#define SAA7146_I2C_SHORT_DELAY 0x2
+ int flags;
+
+ /* pairs of subvendor and subdevice ids for
+ supported devices, last entry 0xffff, 0xfff */
+ struct module *module;
+ struct pci_driver driver;
+ struct pci_device_id *pci_tbl;
+
+ /* extension functions */
+ int (*probe)(struct saa7146_dev *);
+ int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+ int (*detach)(struct saa7146_dev*);
+
+ u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */
+ void (*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+ dma_addr_t dma_handle;
+ __le32 *cpu_addr;
+};
+
+struct saa7146_dev
+{
+ struct module *module;
+
+ struct v4l2_device v4l2_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ /* different device locks */
+ spinlock_t slock;
+ struct mutex v4l2_lock;
+
+ unsigned char __iomem *mem; /* pointer to mapped IO memory */
+ u32 revision; /* chip revision; needed for bug-workarounds*/
+
+ /* pci-device & irq stuff*/
+ char name[32];
+ struct pci_dev *pci;
+ u32 int_todo;
+ spinlock_t int_slock;
+
+ /* extension handling */
+ struct saa7146_extension *ext; /* indicates if handled by extension */
+ void *ext_priv; /* pointer for extension private use (most likely some private data) */
+ struct saa7146_ext_vv *ext_vv_data;
+
+ /* per device video/vbi informations (if available) */
+ struct saa7146_vv *vv_data;
+ void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+ /* i2c-stuff */
+ struct mutex i2c_lock;
+
+ u32 i2c_bitrate;
+ struct saa7146_dma d_i2c; /* pointer to i2c memory */
+ wait_queue_head_t i2c_wq;
+ int i2c_op;
+
+ /* memories */
+ struct saa7146_dma d_rps0;
+ struct saa7146_dma d_rps1;
+};
+
+static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
+}
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+
+/* from saa7146_core.c */
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM ( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM ( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1 0x0000000800
+#define PV1 0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP 0x00000000 /* No operation */
+#define CMD_CLR_EVENT 0x00000000 /* Clear event */
+#define CMD_SET_EVENT 0x10000000 /* Set signal event */
+#define CMD_PAUSE 0x20000000 /* Pause */
+#define CMD_CHECK_LATE 0x30000000 /* Check late */
+#define CMD_UPLOAD 0x40000000 /* Upload */
+#define CMD_STOP 0x50000000 /* Stop */
+#define CMD_INTERRUPT 0x60000000 /* Interrupt */
+#define CMD_JUMP 0x80000000 /* Jump */
+#define CMD_WR_REG 0x90000000 /* Write (load) register */
+#define CMD_RD_REG 0xa0000000 /* Read (store) register */
+#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */
+
+#define CMD_OAN MASK_27
+#define CMD_INV MASK_26
+#define CMD_SIG4 MASK_25
+#define CMD_SIG3 MASK_24
+#define CMD_SIG2 MASK_23
+#define CMD_SIG1 MASK_22
+#define CMD_SIG0 MASK_21
+#define CMD_O_FID_B MASK_14
+#define CMD_E_FID_B MASK_13
+#define CMD_O_FID_A MASK_12
+#define CMD_E_FID_A MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS (1<<15) // Source Line Threshold reached
+#define EVT_VBI_B (1<<9) // VSYNC Event
+#define RPS_OAN (1<<27) // 1: OR events, 0: AND events
+#define RPS_INV (1<<26) // Invert (compound) event
+#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00 0x00000001 /* Mask value for bit 0 */
+#define MASK_01 0x00000002 /* Mask value for bit 1 */
+#define MASK_02 0x00000004 /* Mask value for bit 2 */
+#define MASK_03 0x00000008 /* Mask value for bit 3 */
+#define MASK_04 0x00000010 /* Mask value for bit 4 */
+#define MASK_05 0x00000020 /* Mask value for bit 5 */
+#define MASK_06 0x00000040 /* Mask value for bit 6 */
+#define MASK_07 0x00000080 /* Mask value for bit 7 */
+#define MASK_08 0x00000100 /* Mask value for bit 8 */
+#define MASK_09 0x00000200 /* Mask value for bit 9 */
+#define MASK_10 0x00000400 /* Mask value for bit 10 */
+#define MASK_11 0x00000800 /* Mask value for bit 11 */
+#define MASK_12 0x00001000 /* Mask value for bit 12 */
+#define MASK_13 0x00002000 /* Mask value for bit 13 */
+#define MASK_14 0x00004000 /* Mask value for bit 14 */
+#define MASK_15 0x00008000 /* Mask value for bit 15 */
+#define MASK_16 0x00010000 /* Mask value for bit 16 */
+#define MASK_17 0x00020000 /* Mask value for bit 17 */
+#define MASK_18 0x00040000 /* Mask value for bit 18 */
+#define MASK_19 0x00080000 /* Mask value for bit 19 */
+#define MASK_20 0x00100000 /* Mask value for bit 20 */
+#define MASK_21 0x00200000 /* Mask value for bit 21 */
+#define MASK_22 0x00400000 /* Mask value for bit 22 */
+#define MASK_23 0x00800000 /* Mask value for bit 23 */
+#define MASK_24 0x01000000 /* Mask value for bit 24 */
+#define MASK_25 0x02000000 /* Mask value for bit 25 */
+#define MASK_26 0x04000000 /* Mask value for bit 26 */
+#define MASK_27 0x08000000 /* Mask value for bit 27 */
+#define MASK_28 0x10000000 /* Mask value for bit 28 */
+#define MASK_29 0x20000000 /* Mask value for bit 29 */
+#define MASK_30 0x40000000 /* Mask value for bit 30 */
+#define MASK_31 0x80000000 /* Mask value for bit 31 */
+
+#define MASK_B0 0x000000ff /* Mask value for byte 0 */
+#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */
+#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */
+#define MASK_B3 0xff000000 /* Mask value for byte 3 */
+
+#define MASK_W0 0x0000ffff /* Mask value for word 0 */
+#define MASK_W1 0xffff0000 /* Mask value for word 1 */
+
+#define MASK_PA 0xfffffffc /* Mask value for physical address */
+#define MASK_PR 0xfffffffe /* Mask value for protection register */
+#define MASK_ER 0xffffffff /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000 /* No mask */
+
+/* register aliases */
+#define BASE_ODD1 0x00 /* Video DMA 1 registers */
+#define BASE_EVEN1 0x04
+#define PROT_ADDR1 0x08
+#define PITCH1 0x0C
+#define BASE_PAGE1 0x10 /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1 0x14
+
+#define BASE_ODD2 0x18 /* Video DMA 2 registers */
+#define BASE_EVEN2 0x1C
+#define PROT_ADDR2 0x20
+#define PITCH2 0x24
+#define BASE_PAGE2 0x28 /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2 0x2C
+
+#define BASE_ODD3 0x30 /* Video DMA 3 registers */
+#define BASE_EVEN3 0x34
+#define PROT_ADDR3 0x38
+#define PITCH3 0x3C
+#define BASE_PAGE3 0x40 /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3 0x44
+
+#define PCI_BT_V1 0x48 /* Video/FIFO 1 */
+#define PCI_BT_V2 0x49 /* Video/FIFO 2 */
+#define PCI_BT_V3 0x4A /* Video/FIFO 3 */
+#define PCI_BT_DEBI 0x4B /* DEBI */
+#define PCI_BT_A 0x4C /* Audio */
+
+#define DD1_INIT 0x50 /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */
+#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */
+
+#define BRS_CTRL 0x58 /* BRS control register */
+#define HPS_CTRL 0x5C /* HPS control register */
+#define HPS_V_SCALE 0x60 /* HPS vertical scale */
+#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */
+#define HPS_H_SCALE 0x6C /* HPS horizontal scale */
+#define BCS_CTRL 0x70 /* BCS control */
+#define CHROMA_KEY_RANGE 0x74
+#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG 0x7C
+#define DEBI_COMMAND 0x80
+#define DEBI_PAGE 0x84
+#define DEBI_AD 0x88
+
+#define I2C_TRANSFER 0x8C
+#define I2C_STATUS 0x90
+
+#define BASE_A1_IN 0x94 /* Audio 1 input DMA */
+#define PROT_A1_IN 0x98
+#define PAGE_A1_IN 0x9C
+
+#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */
+#define PROT_A1_OUT 0xA4
+#define PAGE_A1_OUT 0xA8
+
+#define BASE_A2_IN 0xAC /* Audio 2 input DMA */
+#define PROT_A2_IN 0xB0
+#define PAGE_A2_IN 0xB4
+
+#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */
+#define PROT_A2_OUT 0xBC
+#define PAGE_A2_OUT 0xC0
+
+#define RPS_PAGE0 0xC4 /* RPS task 0 page register */
+#define RPS_PAGE1 0xC8 /* RPS task 1 page register */
+
+#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */
+#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */
+
+#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */
+#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */
+
+#define IER 0xDC /* Interrupt enable register */
+
+#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */
+
+#define EC1SSR 0xE4 /* Event cnt set 1 source select */
+#define EC2SSR 0xE8 /* Event cnt set 2 source select */
+#define ECT1R 0xEC /* Event cnt set 1 thresholds */
+#define ECT2R 0xF0 /* Event cnt set 2 thresholds */
+
+#define ACON1 0xF4
+#define ACON2 0xF8
+
+#define MC1 0xFC /* Main control register 1 */
+#define MC2 0x100 /* Main control register 2 */
+
+#define RPS_ADDR0 0x104 /* RPS task 0 address register */
+#define RPS_ADDR1 0x108 /* RPS task 1 address register */
+
+#define ISR 0x10C /* Interrupt status register */
+#define PSR 0x110 /* Primary status register */
+#define SSR 0x114 /* Secondary status register */
+
+#define EC1R 0x118 /* Event counter set 1 register */
+#define EC2R 0x11C /* Event counter set 2 register */
+
+#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */
+
+#define LEVEL_REP 0x140,
+#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */
+#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF 0x80000000 /* PCI parity error */
+#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */
+#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */
+#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */
+#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */
+#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */
+#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */
+#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */
+#define SPCI_UPLD 0x00100000 /* RPS in upload */
+#define SPCI_DEBI_S 0x00080000 /* DEBI status */
+#define SPCI_DEBI_E 0x00040000 /* DEBI error */
+#define SPCI_IIC_S 0x00020000 /* I2C status */
+#define SPCI_IIC_E 0x00010000 /* I2C error */
+#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */
+#define SPCI_V_PE 0x00000400 /* Video protection address */
+#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */
+#define SPCI_FIDA 0x00000100 /* Field ID video port A */
+#define SPCI_FIDB 0x00000080 /* Field ID video port B */
+#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */
+#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */
+#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */
+#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */
+#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S 0x00000002 /* Event counter 3 */
+#define SPCI_EC0S 0x00000001 /* Event counter 0 */
+
+/* i2c */
+#define SAA7146_I2C_ABORT (1<<7)
+#define SAA7146_I2C_SPERR (1<<6)
+#define SAA7146_I2C_APERR (1<<5)
+#define SAA7146_I2C_DTERR (1<<4)
+#define SAA7146_I2C_DRERR (1<<3)
+#define SAA7146_I2C_AL (1<<2)
+#define SAA7146_I2C_ERR (1<<1)
+#define SAA7146_I2C_BUSY (1<<0)
+
+#define SAA7146_I2C_START (0x3)
+#define SAA7146_I2C_CONT (0x2)
+#define SAA7146_I2C_STOP (0x1)
+#define SAA7146_I2C_NOP (0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300)
+
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) | y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+#endif
Code Review / kvmfornfv.git / blobdiff