Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / include / linux / usb / storage.h

diff --git a/kernel/include/linux/usb/storage.h b/kernel/include/linux/usb/storage.h
new file mode 100644 (file)
index 0000000..cb33fff
--- /dev/null
+++ b/kernel/include/linux/usb/storage.h
@@ -0,0 +1,86 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+/* Storage subclass codes */
+
+#define USB_SC_RBC     0x01            /* Typically, flash devices */
+#define USB_SC_8020    0x02            /* CD-ROM */
+#define USB_SC_QIC     0x03            /* QIC-157 Tapes */
+#define USB_SC_UFI     0x04            /* Floppy */
+#define USB_SC_8070    0x05            /* Removable media */
+#define USB_SC_SCSI    0x06            /* Transparent */
+#define USB_SC_LOCKABLE        0x07            /* Password-protected */
+
+#define USB_SC_ISD200  0xf0            /* ISD200 ATA */
+#define USB_SC_CYP_ATACB       0xf1    /* Cypress ATACB */
+#define USB_SC_DEVICE  0xff            /* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI     0x00            /* Control/Bulk/Interrupt */
+#define USB_PR_CB      0x01            /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK    0x50            /* bulk only */
+#define USB_PR_UAS     0x62            /* USB Attached SCSI */
+
+#define USB_PR_USBAT   0x80            /* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09     0x81    /* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55  0x82            /* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB        0xf0            /* Combination CB/SDDR09 */
+#define USB_PR_FREECOM 0xf1            /* Freecom */
+#define USB_PR_DATAFAB 0xf2            /* Datafab chipsets */
+#define USB_PR_JUMPSHOT        0xf3            /* Lexar Jumpshot */
+#define USB_PR_ALAUDA  0xf4            /* Alauda chipsets */
+#define USB_PR_KARMA   0xf5            /* Rio Karma */
+
+#define USB_PR_DEVICE  0xff            /* Use device's value */
+
+ /*
+  * Bulk only data structures
+  */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+       __le32  Signature;              /* contains 'USBC' */
+       __u32   Tag;                    /* unique per command id */
+       __le32  DataTransferLength;     /* size of data */
+       __u8    Flags;                  /* direction in bit 0 */
+       __u8    Lun;                    /* LUN normally 0 */
+       __u8    Length;                 /* of of the CDB */
+       __u8    CDB[16];                /* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN    31
+#define US_BULK_CB_SIGN                0x43425355      /*spells out USBC */
+#define US_BULK_FLAG_IN                (1 << 7)
+#define US_BULK_FLAG_OUT       0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+       __le32  Signature;      /* should = 'USBS' */
+       __u32   Tag;            /* same as original command */
+       __le32  Residue;        /* amount not transferred */
+       __u8    Status;         /* see below */
+};
+
+#define US_BULK_CS_WRAP_LEN    13
+#define US_BULK_CS_SIGN                0x53425355      /* spells out 'USBS' */
+#define US_BULK_STAT_OK                0
+#define US_BULK_STAT_FAIL      1
+#define US_BULK_STAT_PHASE     2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST   0xff
+#define US_BULK_GET_MAX_LUN     0xfe
+
+#endif