Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / include / linux / usb / isp116x.h

diff --git a/kernel/include/linux/usb/isp116x.h b/kernel/include/linux/usb/isp116x.h
new file mode 100644 (file)
index 0000000..96ca114
--- /dev/null
+++ b/kernel/include/linux/usb/isp116x.h
@@ -0,0 +1,33 @@
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
+struct isp116x_platform_data {
+       /* Enable internal resistors on downstream ports */
+       unsigned sel15Kres:1;
+       /* On-chip overcurrent detection */
+       unsigned oc_enable:1;
+       /* INT output polarity */
+       unsigned int_act_high:1;
+       /* INT edge or level triggered */
+       unsigned int_edge_triggered:1;
+       /* Enable wakeup by devices on usb bus (e.g. wakeup
+          by attachment/detachment or by device activity
+          such as moving a mouse). When chosen, this option
+          prevents stopping internal clock, increasing
+          thereby power consumption in suspended state. */
+       unsigned remote_wakeup_enable:1;
+       /* Inter-io delay (ns). The chip is picky about access timings; it
+          expects at least:
+          150ns delay between consecutive accesses to DATA_REG,
+          300ns delay between access to ADDR_REG and DATA_REG
+          OE, WE MUST NOT be changed during these intervals
+        */
+       void (*delay) (struct device *dev, int delay);
+};
+
+#endif /* __LINUX_USB_ISP116X_H */