--- /dev/null
+#ifndef LINUX_PREEMPT_MASK_H
+#define LINUX_PREEMPT_MASK_H
+
+#include <linux/preempt.h>
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ *
+ * The hardirq count could in theory be the same as the number of
+ * interrupts in the system, but we run all interrupt handlers with
+ * interrupts disabled, so we cannot have nesting interrupts. Though
+ * there are a few palaeontologic drivers which reenable interrupts in
+ * the handler, so we need more than one bit here.
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * SOFTIRQ_MASK: 0x0000ff00
+ * HARDIRQ_MASK: 0x000f0000
+ * NMI_MASK: 0x00100000
+ * PREEMPT_ACTIVE: 0x00200000
+ */
+#define PREEMPT_BITS 8
+#define SOFTIRQ_BITS 8
+#define HARDIRQ_BITS 4
+#define NMI_BITS 1
+
+#define PREEMPT_SHIFT 0
+#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
+#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS)
+#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS)
+
+#define __IRQ_MASK(x) ((1UL << (x))-1)
+
+#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
+#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
+#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT)
+
+#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
+#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
+#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
+#define NMI_OFFSET (1UL << NMI_SHIFT)
+
+#ifndef CONFIG_PREEMPT_RT_FULL
+# define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET)
+#else
+# define SOFTIRQ_DISABLE_OFFSET (0)
+#endif
+
+#define PREEMPT_ACTIVE_BITS 1
+#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS)
+#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
+
+#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
+#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
+ | NMI_MASK))
+#ifndef CONFIG_PREEMPT_RT_FULL
+# define softirq_count() (preempt_count() & SOFTIRQ_MASK)
+# define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET)
+#else
+# define softirq_count() (0UL)
+extern int in_serving_softirq(void);
+#endif
+
+/*
+ * Are we doing bottom half or hardware interrupt processing?
+ * Are we in a softirq context? Interrupt context?
+ * in_softirq - Are we currently processing softirq or have bh disabled?
+ * in_serving_softirq - Are we currently processing softirq?
+ */
+#define in_irq() (hardirq_count())
+#define in_softirq() (softirq_count())
+#define in_interrupt() (irq_count())
+
+/*
+ * Are we in NMI context?
+ */
+#define in_nmi() (preempt_count() & NMI_MASK)
+
+#if defined(CONFIG_PREEMPT_COUNT)
+# define PREEMPT_CHECK_OFFSET 1
+#else
+# define PREEMPT_CHECK_OFFSET 0
+#endif
+
+/*
+ * The preempt_count offset needed for things like:
+ *
+ * spin_lock_bh()
+ *
+ * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and
+ * softirqs, such that unlock sequences of:
+ *
+ * spin_unlock();
+ * local_bh_enable();
+ *
+ * Work as expected.
+ */
+#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET)
+
+/*
+ * Are we running in atomic context? WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels. Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
+#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
+
+/*
+ * Check whether we were atomic before we did preempt_disable():
+ * (used by the scheduler, *after* releasing the kernel lock)
+ */
+#define in_atomic_preempt_off() \
+ ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
+
+#ifdef CONFIG_PREEMPT_COUNT
+# define preemptible() (preempt_count() == 0 && !irqs_disabled())
+#else
+# define preemptible() 0
+#endif
+
+#endif /* LINUX_PREEMPT_MASK_H */
Code Review / kvmfornfv.git / blobdiff