--- /dev/null
+/*
+ * pm.h - Power management interface
+ *
+ * Copyright (C) 2000 Andrew Henroid
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_PM_H
+#define _LINUX_PM_H
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+
+/*
+ * Callbacks for platform drivers to implement.
+ */
+extern void (*pm_power_off)(void);
+extern void (*pm_power_off_prepare)(void);
+
+struct device; /* we have a circular dep with device.h */
+#ifdef CONFIG_VT_CONSOLE_SLEEP
+extern void pm_vt_switch_required(struct device *dev, bool required);
+extern void pm_vt_switch_unregister(struct device *dev);
+#else
+static inline void pm_vt_switch_required(struct device *dev, bool required)
+{
+}
+static inline void pm_vt_switch_unregister(struct device *dev)
+{
+}
+#endif /* CONFIG_VT_CONSOLE_SLEEP */
+
+/*
+ * Device power management
+ */
+
+struct device;
+
+#ifdef CONFIG_PM
+extern const char power_group_name[]; /* = "power" */
+#else
+#define power_group_name NULL
+#endif
+
+typedef struct pm_message {
+ int event;
+} pm_message_t;
+
+/**
+ * struct dev_pm_ops - device PM callbacks
+ *
+ * Several device power state transitions are externally visible, affecting
+ * the state of pending I/O queues and (for drivers that touch hardware)
+ * interrupts, wakeups, DMA, and other hardware state. There may also be
+ * internal transitions to various low-power modes which are transparent
+ * to the rest of the driver stack (such as a driver that's ON gating off
+ * clocks which are not in active use).
+ *
+ * The externally visible transitions are handled with the help of callbacks
+ * included in this structure in such a way that two levels of callbacks are
+ * involved. First, the PM core executes callbacks provided by PM domains,
+ * device types, classes and bus types. They are the subsystem-level callbacks
+ * supposed to execute callbacks provided by device drivers, although they may
+ * choose not to do that. If the driver callbacks are executed, they have to
+ * collaborate with the subsystem-level callbacks to achieve the goals
+ * appropriate for the given system transition, given transition phase and the
+ * subsystem the device belongs to.
+ *
+ * @prepare: The principal role of this callback is to prevent new children of
+ * the device from being registered after it has returned (the driver's
+ * subsystem and generally the rest of the kernel is supposed to prevent
+ * new calls to the probe method from being made too once @prepare() has
+ * succeeded). If @prepare() detects a situation it cannot handle (e.g.
+ * registration of a child already in progress), it may return -EAGAIN, so
+ * that the PM core can execute it once again (e.g. after a new child has
+ * been registered) to recover from the race condition.
+ * This method is executed for all kinds of suspend transitions and is
+ * followed by one of the suspend callbacks: @suspend(), @freeze(), or
+ * @poweroff(). If the transition is a suspend to memory or standby (that
+ * is, not related to hibernation), the return value of @prepare() may be
+ * used to indicate to the PM core to leave the device in runtime suspend
+ * if applicable. Namely, if @prepare() returns a positive number, the PM
+ * core will understand that as a declaration that the device appears to be
+ * runtime-suspended and it may be left in that state during the entire
+ * transition and during the subsequent resume if all of its descendants
+ * are left in runtime suspend too. If that happens, @complete() will be
+ * executed directly after @prepare() and it must ensure the proper
+ * functioning of the device after the system resume.
+ * The PM core executes subsystem-level @prepare() for all devices before
+ * starting to invoke suspend callbacks for any of them, so generally
+ * devices may be assumed to be functional or to respond to runtime resume
+ * requests while @prepare() is being executed. However, device drivers
+ * may NOT assume anything about the availability of user space at that
+ * time and it is NOT valid to request firmware from within @prepare()
+ * (it's too late to do that). It also is NOT valid to allocate
+ * substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
+ * [To work around these limitations, drivers may register suspend and
+ * hibernation notifiers to be executed before the freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare(). This method is executed for
+ * all kinds of resume transitions, following one of the resume callbacks:
+ * @resume(), @thaw(), @restore(). Also called if the state transition
+ * fails before the driver's suspend callback: @suspend(), @freeze() or
+ * @poweroff(), can be executed (e.g. if the suspend callback fails for one
+ * of the other devices that the PM core has unsuccessfully attempted to
+ * suspend earlier).
+ * The PM core executes subsystem-level @complete() after it has executed
+ * the appropriate resume callbacks for all devices. If the corresponding
+ * @prepare() at the beginning of the suspend transition returned a
+ * positive number and the device was left in runtime suspend (without
+ * executing any suspend and resume callbacks for it), @complete() will be
+ * the only callback executed for the device during resume. In that case,
+ * @complete() must be prepared to do whatever is necessary to ensure the
+ * proper functioning of the device after the system resume. To this end,
+ * @complete() can check the power.direct_complete flag of the device to
+ * learn whether (unset) or not (set) the previous suspend and resume
+ * callbacks have been executed for it.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ * contents of main memory are preserved. The exact action to perform
+ * depends on the device's subsystem (PM domain, device type, class or bus
+ * type), but generally the device must be quiescent after subsystem-level
+ * @suspend() has returned, so that it doesn't do any I/O or DMA.
+ * Subsystem-level @suspend() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
+ *
+ * @suspend_late: Continue operations started by @suspend(). For a number of
+ * devices @suspend_late() may point to the same callback routine as the
+ * runtime suspend callback.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ * contents of main memory were preserved. The exact action to perform
+ * depends on the device's subsystem, but generally the driver is expected
+ * to start working again, responding to hardware events and software
+ * requests (the device itself may be left in a low-power state, waiting
+ * for a runtime resume to occur). The state of the device at the time its
+ * driver's @resume() callback is run depends on the platform and subsystem
+ * the device belongs to. On most platforms, there are no restrictions on
+ * availability of resources like clocks during @resume().
+ * Subsystem-level @resume() is executed for all devices after invoking
+ * subsystem-level @resume_noirq() for all of them.
+ *
+ * @resume_early: Prepare to execute @resume(). For a number of devices
+ * @resume_early() may point to the same callback routine as the runtime
+ * resume callback.
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ * Analogous to @suspend(), but it should not enable the device to signal
+ * wakeup events or change its power state. The majority of subsystems
+ * (with the notable exception of the PCI bus type) expect the driver-level
+ * @freeze() to save the device settings in memory to be used by @restore()
+ * during the subsequent resume from hibernation.
+ * Subsystem-level @freeze() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
+ *
+ * @freeze_late: Continue operations started by @freeze(). Analogous to
+ * @suspend_late(), but it should not enable the device to signal wakeup
+ * events or change its power state.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ * if the creation of an image has failed. Also executed after a failing
+ * attempt to restore the contents of main memory from such an image.
+ * Undo the changes made by the preceding @freeze(), so the device can be
+ * operated in the same way as immediately before the call to @freeze().
+ * Subsystem-level @thaw() is executed for all devices after invoking
+ * subsystem-level @thaw_noirq() for all of them. It also may be executed
+ * directly after @freeze() in case of a transition error.
+ *
+ * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the
+ * preceding @freeze_late().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ * Analogous to @suspend(), but it need not save the device's settings in
+ * memory.
+ * Subsystem-level @poweroff() is executed for all devices after invoking
+ * subsystem-level @prepare() for all of them.
+ *
+ * @poweroff_late: Continue operations started by @poweroff(). Analogous to
+ * @suspend_late(), but it need not save the device's settings in memory.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ * memory from a hibernation image, analogous to @resume().
+ *
+ * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
+ *
+ * @suspend_noirq: Complete the actions started by @suspend(). Carry out any
+ * additional operations required for suspending the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @suspend_noirq() is being executed.
+ * It generally is expected that the device will be in a low-power state
+ * (appropriate for the target system sleep state) after subsystem-level
+ * @suspend_noirq() has returned successfully. If the device can generate
+ * system wakeup signals and is enabled to wake up the system, it should be
+ * configured to do so at that time. However, depending on the platform
+ * and device's subsystem, @suspend() or @suspend_late() may be allowed to
+ * put the device into the low-power state and configure it to generate
+ * wakeup signals, in which case it generally is not necessary to define
+ * @suspend_noirq().
+ *
+ * @resume_noirq: Prepare for the execution of @resume() by carrying out any
+ * operations required for resuming the device that might be racing with
+ * its driver's interrupt handler, which is guaranteed not to run while
+ * @resume_noirq() is being executed.
+ *
+ * @freeze_noirq: Complete the actions started by @freeze(). Carry out any
+ * additional operations required for freezing the device that might be
+ * racing with its driver's interrupt handler, which is guaranteed not to
+ * run while @freeze_noirq() is being executed.
+ * The power state of the device should not be changed by either @freeze(),
+ * or @freeze_late(), or @freeze_noirq() and it should not be configured to
+ * signal system wakeup by any of these callbacks.
+ *
+ * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @thaw_noirq() is being executed.
+ *
+ * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to
+ * @suspend_noirq(), but it need not save the device's settings in memory.
+ *
+ * @restore_noirq: Prepare for the execution of @restore() by carrying out any
+ * operations required for thawing the device that might be racing with its
+ * driver's interrupt handler, which is guaranteed not to run while
+ * @restore_noirq() is being executed. Analogous to @resume_noirq().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
+ * not cause the PM core to abort the resume transition during which they are
+ * returned. The error codes returned in those cases are only printed by the PM
+ * core to the system logs for debugging purposes. Still, it is recommended
+ * that drivers only return error codes from their resume methods in case of an
+ * unrecoverable failure (i.e. when the device being handled refuses to resume
+ * and becomes unusable) to allow us to modify the PM core in the future, so
+ * that it can avoid attempting to handle devices that failed to resume and
+ * their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed. However, a callback routine must NOT try to unregister the device
+ * it was called for, although it may unregister children of that device (for
+ * example, if it detects that a child was unplugged while the system was
+ * asleep).
+ *
+ * Refer to Documentation/power/devices.txt for more information about the role
+ * of the above callbacks in the system suspend process.
+ *
+ * There also are callbacks related to runtime power management of devices.
+ * Again, these callbacks are executed by the PM core only for subsystems
+ * (PM domains, device types, classes and bus types) and the subsystem-level
+ * callbacks are supposed to invoke the driver callbacks. Moreover, the exact
+ * actions to be performed by a device driver's callbacks generally depend on
+ * the platform and subsystem the device belongs to.
+ *
+ * @runtime_suspend: Prepare the device for a condition in which it won't be
+ * able to communicate with the CPU(s) and RAM due to power management.
+ * This need not mean that the device should be put into a low-power state.
+ * For example, if the device is behind a link which is about to be turned
+ * off, the device may remain at full power. If the device does go to low
+ * power and is capable of generating runtime wakeup events, remote wakeup
+ * (i.e., a hardware mechanism allowing the device to request a change of
+ * its power state via an interrupt) should be enabled for it.
+ *
+ * @runtime_resume: Put the device into the fully active state in response to a
+ * wakeup event generated by hardware or at the request of software. If
+ * necessary, put the device into the full-power state and restore its
+ * registers, so that it is fully operational.
+ *
+ * @runtime_idle: Device appears to be inactive and it might be put into a
+ * low-power state if all of the necessary conditions are satisfied.
+ * Check these conditions, and return 0 if it's appropriate to let the PM
+ * core queue a suspend request for the device.
+ *
+ * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * role of the above callbacks in device runtime power management.
+ *
+ */
+
+struct dev_pm_ops {
+ int (*prepare)(struct device *dev);
+ void (*complete)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+ int (*freeze)(struct device *dev);
+ int (*thaw)(struct device *dev);
+ int (*poweroff)(struct device *dev);
+ int (*restore)(struct device *dev);
+ int (*suspend_late)(struct device *dev);
+ int (*resume_early)(struct device *dev);
+ int (*freeze_late)(struct device *dev);
+ int (*thaw_early)(struct device *dev);
+ int (*poweroff_late)(struct device *dev);
+ int (*restore_early)(struct device *dev);
+ int (*suspend_noirq)(struct device *dev);
+ int (*resume_noirq)(struct device *dev);
+ int (*freeze_noirq)(struct device *dev);
+ int (*thaw_noirq)(struct device *dev);
+ int (*poweroff_noirq)(struct device *dev);
+ int (*restore_noirq)(struct device *dev);
+ int (*runtime_suspend)(struct device *dev);
+ int (*runtime_resume)(struct device *dev);
+ int (*runtime_idle)(struct device *dev);
+};
+
+#ifdef CONFIG_PM_SLEEP
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+ .suspend = suspend_fn, \
+ .resume = resume_fn, \
+ .freeze = suspend_fn, \
+ .thaw = resume_fn, \
+ .poweroff = suspend_fn, \
+ .restore = resume_fn,
+#else
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+ .suspend_late = suspend_fn, \
+ .resume_early = resume_fn, \
+ .freeze_late = suspend_fn, \
+ .thaw_early = resume_fn, \
+ .poweroff_late = suspend_fn, \
+ .restore_early = resume_fn,
+#else
+#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
+#ifdef CONFIG_PM
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
+ .runtime_suspend = suspend_fn, \
+ .runtime_resume = resume_fn, \
+ .runtime_idle = idle_fn,
+#else
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
+#endif
+
+/*
+ * Use this if you want to use the same suspend and resume callbacks for suspend
+ * to RAM and hibernation.
+ */
+#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
+const struct dev_pm_ops name = { \
+ SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+}
+
+/*
+ * Use this for defining a set of PM operations to be used in all situations
+ * (system suspend, hibernation or runtime PM).
+ * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
+ * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
+ * and .runtime_resume(), because .runtime_suspend() always works on an already
+ * quiescent device, while .suspend() should assume that the device may be doing
+ * something when it is called (it should ensure that the device will be
+ * quiescent after it has returned). Therefore it's better to point the "late"
+ * suspend and "early" resume callback pointers, .suspend_late() and
+ * .resume_early(), to the same routines as .runtime_suspend() and
+ * .runtime_resume(), respectively (and analogously for hibernation).
+ */
+#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
+const struct dev_pm_ops name = { \
+ SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+ SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
+}
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON No transition.
+ *
+ * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
+ * for all devices.
+ *
+ * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
+ * for all devices.
+ *
+ * HIBERNATE Hibernation image has been saved, call ->prepare() and
+ * ->poweroff() for all devices.
+ *
+ * QUIESCE Contents of main memory are going to be restored from a (loaded)
+ * hibernation image, call ->prepare() and ->freeze() for all
+ * devices.
+ *
+ * RESUME System is resuming, call ->resume() and ->complete() for all
+ * devices.
+ *
+ * THAW Hibernation image has been created, call ->thaw() and
+ * ->complete() for all devices.
+ *
+ * RESTORE Contents of main memory have been restored from a hibernation
+ * image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER Creation of a hibernation image or restoration of the main
+ * memory contents from a hibernation image has failed, call
+ * ->thaw() and ->complete() for all devices.
+ *
+ * The following PM_EVENT_ messages are defined for internal use by
+ * kernel subsystems. They are never issued by the PM core.
+ *
+ * USER_SUSPEND Manual selective suspend was issued by userspace.
+ *
+ * USER_RESUME Manual selective resume was issued by userspace.
+ *
+ * REMOTE_WAKEUP Remote-wakeup request was received from the device.
+ *
+ * AUTO_SUSPEND Automatic (device idle) runtime suspend was
+ * initiated by the subsystem.
+ *
+ * AUTO_RESUME Automatic (device needed) runtime resume was
+ * requested by a driver.
+ */
+
+#define PM_EVENT_INVALID (-1)
+#define PM_EVENT_ON 0x0000
+#define PM_EVENT_FREEZE 0x0001
+#define PM_EVENT_SUSPEND 0x0002
+#define PM_EVENT_HIBERNATE 0x0004
+#define PM_EVENT_QUIESCE 0x0008
+#define PM_EVENT_RESUME 0x0010
+#define PM_EVENT_THAW 0x0020
+#define PM_EVENT_RESTORE 0x0040
+#define PM_EVENT_RECOVER 0x0080
+#define PM_EVENT_USER 0x0100
+#define PM_EVENT_REMOTE 0x0200
+#define PM_EVENT_AUTO 0x0400
+
+#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND)
+#define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME)
+#define PM_EVENT_REMOTE_RESUME (PM_EVENT_REMOTE | PM_EVENT_RESUME)
+#define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND)
+#define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME)
+
+#define PMSG_INVALID ((struct pm_message){ .event = PM_EVENT_INVALID, })
+#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
+#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_USER_SUSPEND ((struct pm_message) \
+ { .event = PM_EVENT_USER_SUSPEND, })
+#define PMSG_USER_RESUME ((struct pm_message) \
+ { .event = PM_EVENT_USER_RESUME, })
+#define PMSG_REMOTE_RESUME ((struct pm_message) \
+ { .event = PM_EVENT_REMOTE_RESUME, })
+#define PMSG_AUTO_SUSPEND ((struct pm_message) \
+ { .event = PM_EVENT_AUTO_SUSPEND, })
+#define PMSG_AUTO_RESUME ((struct pm_message) \
+ { .event = PM_EVENT_AUTO_RESUME, })
+
+#define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0)
+
+/**
+ * Device run-time power management status.
+ *
+ * These status labels are used internally by the PM core to indicate the
+ * current status of a device with respect to the PM core operations. They do
+ * not reflect the actual power state of the device or its status as seen by the
+ * driver.
+ *
+ * RPM_ACTIVE Device is fully operational. Indicates that the device
+ * bus type's ->runtime_resume() callback has completed
+ * successfully.
+ *
+ * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
+ * completed successfully. The device is regarded as
+ * suspended.
+ *
+ * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
+ * executed.
+ *
+ * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
+ * executed.
+ */
+
+enum rpm_status {
+ RPM_ACTIVE = 0,
+ RPM_RESUMING,
+ RPM_SUSPENDED,
+ RPM_SUSPENDING,
+};
+
+/**
+ * Device run-time power management request types.
+ *
+ * RPM_REQ_NONE Do nothing.
+ *
+ * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback
+ *
+ * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback
+ *
+ * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has
+ * been inactive for as long as power.autosuspend_delay
+ *
+ * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback
+ */
+
+enum rpm_request {
+ RPM_REQ_NONE = 0,
+ RPM_REQ_IDLE,
+ RPM_REQ_SUSPEND,
+ RPM_REQ_AUTOSUSPEND,
+ RPM_REQ_RESUME,
+};
+
+struct wakeup_source;
+struct pm_domain_data;
+
+struct pm_subsys_data {
+ spinlock_t lock;
+ unsigned int refcount;
+#ifdef CONFIG_PM_CLK
+ struct list_head clock_list;
+#endif
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+ struct pm_domain_data *domain_data;
+#endif
+};
+
+struct dev_pm_info {
+ pm_message_t power_state;
+ unsigned int can_wakeup:1;
+ unsigned int async_suspend:1;
+ bool is_prepared:1; /* Owned by the PM core */
+ bool is_suspended:1; /* Ditto */
+ bool is_noirq_suspended:1;
+ bool is_late_suspended:1;
+ bool ignore_children:1;
+ bool early_init:1; /* Owned by the PM core */
+ bool direct_complete:1; /* Owned by the PM core */
+ spinlock_t lock;
+#ifdef CONFIG_PM_SLEEP
+ struct list_head entry;
+ struct completion completion;
+ struct wakeup_source *wakeup;
+ bool wakeup_path:1;
+ bool syscore:1;
+#else
+ unsigned int should_wakeup:1;
+#endif
+#ifdef CONFIG_PM
+ struct timer_list suspend_timer;
+ unsigned long timer_expires;
+ struct work_struct work;
+ wait_queue_head_t wait_queue;
+ atomic_t usage_count;
+ atomic_t child_count;
+ unsigned int disable_depth:3;
+ unsigned int idle_notification:1;
+ unsigned int request_pending:1;
+ unsigned int deferred_resume:1;
+ unsigned int run_wake:1;
+ unsigned int runtime_auto:1;
+ unsigned int no_callbacks:1;
+ unsigned int irq_safe:1;
+ unsigned int use_autosuspend:1;
+ unsigned int timer_autosuspends:1;
+ unsigned int memalloc_noio:1;
+ enum rpm_request request;
+ enum rpm_status runtime_status;
+ int runtime_error;
+ int autosuspend_delay;
+ unsigned long last_busy;
+ unsigned long active_jiffies;
+ unsigned long suspended_jiffies;
+ unsigned long accounting_timestamp;
+#endif
+ struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
+ void (*set_latency_tolerance)(struct device *, s32);
+ struct dev_pm_qos *qos;
+};
+
+extern void update_pm_runtime_accounting(struct device *dev);
+extern int dev_pm_get_subsys_data(struct device *dev);
+extern void dev_pm_put_subsys_data(struct device *dev);
+
+/*
+ * Power domains provide callbacks that are executed during system suspend,
+ * hibernation, system resume and during runtime PM transitions along with
+ * subsystem-level and driver-level callbacks.
+ *
+ * @detach: Called when removing a device from the domain.
+ * @activate: Called before executing probe routines for bus types and drivers.
+ * @sync: Called after successful driver probe.
+ * @dismiss: Called after unsuccessful driver probe and after driver removal.
+ */
+struct dev_pm_domain {
+ struct dev_pm_ops ops;
+ void (*detach)(struct device *dev, bool power_off);
+ int (*activate)(struct device *dev);
+ void (*sync)(struct device *dev);
+ void (*dismiss)(struct device *dev);
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
+ * One transition is triggered by resume(), after a suspend() call; the
+ * message is implicit:
+ *
+ * ON Driver starts working again, responding to hardware events
+ * and software requests. The hardware may have gone through
+ * a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver will rely on while
+ * resuming. On most platforms, there are no restrictions on
+ * availability of resources like clocks during resume().
+ *
+ * Other transitions are triggered by messages sent using suspend(). All
+ * these transitions quiesce the driver, so that I/O queues are inactive.
+ * That commonly entails turning off IRQs and DMA; there may be rules
+ * about how to quiesce that are specific to the bus or the device's type.
+ * (For example, network drivers mark the link state.) Other details may
+ * differ according to the message:
+ *
+ * SUSPEND Quiesce, enter a low power device state appropriate for
+ * the upcoming system state (such as PCI_D3hot), and enable
+ * wakeup events as appropriate.
+ *
+ * HIBERNATE Enter a low power device state appropriate for the hibernation
+ * state (eg. ACPI S4) and enable wakeup events as appropriate.
+ *
+ * FREEZE Quiesce operations so that a consistent image can be saved;
+ * but do NOT otherwise enter a low power device state, and do
+ * NOT emit system wakeup events.
+ *
+ * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
+ * the system from a snapshot taken after an earlier FREEZE.
+ * Some drivers will need to reset their hardware state instead
+ * of preserving it, to ensure that it's never mistaken for the
+ * state which that earlier snapshot had set up.
+ *
+ * A minimally power-aware driver treats all messages as SUSPEND, fully
+ * reinitializes its device during resume() -- whether or not it was reset
+ * during the suspend/resume cycle -- and can't issue wakeup events.
+ *
+ * More power-aware drivers may also use low power states at runtime as
+ * well as during system sleep states like PM_SUSPEND_STANDBY. They may
+ * be able to use wakeup events to exit from runtime low-power states,
+ * or from system low-power states such as standby or suspend-to-RAM.
+ */
+
+#ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void dpm_resume_start(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
+extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_early(pm_message_t state);
+extern void dpm_resume(pm_message_t state);
+extern void dpm_complete(pm_message_t state);
+
+extern void device_pm_unlock(void);
+extern int dpm_suspend_end(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
+extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_late(pm_message_t state);
+extern int dpm_suspend(pm_message_t state);
+extern int dpm_prepare(pm_message_t state);
+
+extern void __suspend_report_result(const char *function, void *fn, int ret);
+
+#define suspend_report_result(fn, ret) \
+ do { \
+ __suspend_report_result(__func__, fn, ret); \
+ } while (0)
+
+extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
+extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *));
+
+extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend_late(struct device *dev);
+extern int pm_generic_suspend_noirq(struct device *dev);
+extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume_early(struct device *dev);
+extern int pm_generic_resume_noirq(struct device *dev);
+extern int pm_generic_resume(struct device *dev);
+extern int pm_generic_freeze_noirq(struct device *dev);
+extern int pm_generic_freeze_late(struct device *dev);
+extern int pm_generic_freeze(struct device *dev);
+extern int pm_generic_thaw_noirq(struct device *dev);
+extern int pm_generic_thaw_early(struct device *dev);
+extern int pm_generic_thaw(struct device *dev);
+extern int pm_generic_restore_noirq(struct device *dev);
+extern int pm_generic_restore_early(struct device *dev);
+extern int pm_generic_restore(struct device *dev);
+extern int pm_generic_poweroff_noirq(struct device *dev);
+extern int pm_generic_poweroff_late(struct device *dev);
+extern int pm_generic_poweroff(struct device *dev);
+extern void pm_generic_complete(struct device *dev);
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define device_pm_lock() do {} while (0)
+#define device_pm_unlock() do {} while (0)
+
+static inline int dpm_suspend_start(pm_message_t state)
+{
+ return 0;
+}
+
+#define suspend_report_result(fn, ret) do {} while (0)
+
+static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
+{
+ return 0;
+}
+
+static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *))
+{
+}
+
+#define pm_generic_prepare NULL
+#define pm_generic_suspend_late NULL
+#define pm_generic_suspend_noirq NULL
+#define pm_generic_suspend NULL
+#define pm_generic_resume_early NULL
+#define pm_generic_resume_noirq NULL
+#define pm_generic_resume NULL
+#define pm_generic_freeze_noirq NULL
+#define pm_generic_freeze_late NULL
+#define pm_generic_freeze NULL
+#define pm_generic_thaw_noirq NULL
+#define pm_generic_thaw_early NULL
+#define pm_generic_thaw NULL
+#define pm_generic_restore_noirq NULL
+#define pm_generic_restore_early NULL
+#define pm_generic_restore NULL
+#define pm_generic_poweroff_noirq NULL
+#define pm_generic_poweroff_late NULL
+#define pm_generic_poweroff NULL
+#define pm_generic_complete NULL
+#endif /* !CONFIG_PM_SLEEP */
+
+/* How to reorder dpm_list after device_move() */
+enum dpm_order {
+ DPM_ORDER_NONE,
+ DPM_ORDER_DEV_AFTER_PARENT,
+ DPM_ORDER_PARENT_BEFORE_DEV,
+ DPM_ORDER_DEV_LAST,
+};
+
+#endif /* _LINUX_PM_H */
Code Review / kvmfornfv.git / blobdiff