--- /dev/null
+/*
+ * Device tables which are exported to userspace via
+ * scripts/mod/file2alias.c. You must keep that file in sync with this
+ * header.
+ */
+
+#ifndef LINUX_MOD_DEVICETABLE_H
+#define LINUX_MOD_DEVICETABLE_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/uuid.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+ __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
+ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+
+#define IEEE1394_MATCH_VENDOR_ID 0x0001
+#define IEEE1394_MATCH_MODEL_ID 0x0002
+#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
+#define IEEE1394_MATCH_VERSION 0x0008
+
+struct ieee1394_device_id {
+ __u32 match_flags;
+ __u32 vendor_id;
+ __u32 model_id;
+ __u32 specifier_id;
+ __u32 version;
+ kernel_ulong_t driver_data;
+};
+
+
+/*
+ * Device table entry for "new style" table-driven USB drivers.
+ * User mode code can read these tables to choose which modules to load.
+ * Declare the table as a MODULE_DEVICE_TABLE.
+ *
+ * A probe() parameter will point to a matching entry from this table.
+ * Use the driver_info field for each match to hold information tied
+ * to that match: device quirks, etc.
+ *
+ * Terminate the driver's table with an all-zeroes entry.
+ * Use the flag values to control which fields are compared.
+ */
+
+/**
+ * struct usb_device_id - identifies USB devices for probing and hotplugging
+ * @match_flags: Bit mask controlling which of the other fields are used to
+ * match against new devices. Any field except for driver_info may be
+ * used, although some only make sense in conjunction with other fields.
+ * This is usually set by a USB_DEVICE_*() macro, which sets all
+ * other fields in this structure except for driver_info.
+ * @idVendor: USB vendor ID for a device; numbers are assigned
+ * by the USB forum to its members.
+ * @idProduct: Vendor-assigned product ID.
+ * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
+ * This is also used to identify individual product versions, for
+ * a range consisting of a single device.
+ * @bcdDevice_hi: High end of version number range. The range of product
+ * versions is inclusive.
+ * @bDeviceClass: Class of device; numbers are assigned
+ * by the USB forum. Products may choose to implement classes,
+ * or be vendor-specific. Device classes specify behavior of all
+ * the interfaces on a device.
+ * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
+ * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
+ * @bInterfaceClass: Class of interface; numbers are assigned
+ * by the USB forum. Products may choose to implement classes,
+ * or be vendor-specific. Interface classes specify behavior only
+ * of a given interface; other interfaces may support other classes.
+ * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
+ * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
+ * @bInterfaceNumber: Number of interface; composite devices may use
+ * fixed interface numbers to differentiate between vendor-specific
+ * interfaces.
+ * @driver_info: Holds information used by the driver. Usually it holds
+ * a pointer to a descriptor understood by the driver, or perhaps
+ * device flags.
+ *
+ * In most cases, drivers will create a table of device IDs by using
+ * USB_DEVICE(), or similar macros designed for that purpose.
+ * They will then export it to userspace using MODULE_DEVICE_TABLE(),
+ * and provide it to the USB core through their usb_driver structure.
+ *
+ * See the usb_match_id() function for information about how matches are
+ * performed. Briefly, you will normally use one of several macros to help
+ * construct these entries. Each entry you provide will either identify
+ * one or more specific products, or will identify a class of products
+ * which have agreed to behave the same. You should put the more specific
+ * matches towards the beginning of your table, so that driver_info can
+ * record quirks of specific products.
+ */
+struct usb_device_id {
+ /* which fields to match against? */
+ __u16 match_flags;
+
+ /* Used for product specific matches; range is inclusive */
+ __u16 idVendor;
+ __u16 idProduct;
+ __u16 bcdDevice_lo;
+ __u16 bcdDevice_hi;
+
+ /* Used for device class matches */
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+
+ /* Used for interface class matches */
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+
+ /* Used for vendor-specific interface matches */
+ __u8 bInterfaceNumber;
+
+ /* not matched against */
+ kernel_ulong_t driver_info
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* Some useful macros to use to create struct usb_device_id */
+#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
+#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
+#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
+#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
+#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
+#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
+#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
+#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
+#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
+#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
+#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400
+
+#define HID_ANY_ID (~0)
+#define HID_BUS_ANY 0xffff
+#define HID_GROUP_ANY 0x0000
+
+struct hid_device_id {
+ __u16 bus;
+ __u16 group;
+ __u32 vendor;
+ __u32 product;
+ kernel_ulong_t driver_data;
+};
+
+/* s390 CCW devices */
+struct ccw_device_id {
+ __u16 match_flags; /* which fields to match against */
+
+ __u16 cu_type; /* control unit type */
+ __u16 dev_type; /* device type */
+ __u8 cu_model; /* control unit model */
+ __u8 dev_model; /* device model */
+
+ kernel_ulong_t driver_info;
+};
+
+#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
+#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
+#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
+#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
+
+/* s390 AP bus devices */
+struct ap_device_id {
+ __u16 match_flags; /* which fields to match against */
+ __u8 dev_type; /* device type */
+ kernel_ulong_t driver_info;
+};
+
+#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
+
+/* s390 css bus devices (subchannels) */
+struct css_device_id {
+ __u8 match_flags;
+ __u8 type; /* subchannel type */
+ kernel_ulong_t driver_data;
+};
+
+#define ACPI_ID_LEN 9
+
+struct acpi_device_id {
+ __u8 id[ACPI_ID_LEN];
+ kernel_ulong_t driver_data;
+};
+
+#define PNP_ID_LEN 8
+#define PNP_MAX_DEVICES 8
+
+struct pnp_device_id {
+ __u8 id[PNP_ID_LEN];
+ kernel_ulong_t driver_data;
+};
+
+struct pnp_card_device_id {
+ __u8 id[PNP_ID_LEN];
+ kernel_ulong_t driver_data;
+ struct {
+ __u8 id[PNP_ID_LEN];
+ } devs[PNP_MAX_DEVICES];
+};
+
+
+#define SERIO_ANY 0xff
+
+struct serio_device_id {
+ __u8 type;
+ __u8 extra;
+ __u8 id;
+ __u8 proto;
+};
+
+/*
+ * Struct used for matching a device
+ */
+struct of_device_id {
+ char name[32];
+ char type[32];
+ char compatible[128];
+ const void *data;
+};
+
+/* VIO */
+struct vio_device_id {
+ char type[32];
+ char compat[32];
+};
+
+/* PCMCIA */
+
+struct pcmcia_device_id {
+ __u16 match_flags;
+
+ __u16 manf_id;
+ __u16 card_id;
+
+ __u8 func_id;
+
+ /* for real multi-function devices */
+ __u8 function;
+
+ /* for pseudo multi-function devices */
+ __u8 device_no;
+
+ __u32 prod_id_hash[4];
+
+ /* not matched against in kernelspace*/
+ const char * prod_id[4];
+
+ /* not matched against */
+ kernel_ulong_t driver_info;
+ char * cisfile;
+};
+
+#define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
+#define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
+#define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
+#define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
+#define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
+#define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
+#define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
+#define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
+#define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
+#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
+#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
+
+/* Input */
+#define INPUT_DEVICE_ID_EV_MAX 0x1f
+#define INPUT_DEVICE_ID_KEY_MIN_INTERESTING 0x71
+#define INPUT_DEVICE_ID_KEY_MAX 0x2ff
+#define INPUT_DEVICE_ID_REL_MAX 0x0f
+#define INPUT_DEVICE_ID_ABS_MAX 0x3f
+#define INPUT_DEVICE_ID_MSC_MAX 0x07
+#define INPUT_DEVICE_ID_LED_MAX 0x0f
+#define INPUT_DEVICE_ID_SND_MAX 0x07
+#define INPUT_DEVICE_ID_FF_MAX 0x7f
+#define INPUT_DEVICE_ID_SW_MAX 0x0f
+
+#define INPUT_DEVICE_ID_MATCH_BUS 1
+#define INPUT_DEVICE_ID_MATCH_VENDOR 2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT 4
+#define INPUT_DEVICE_ID_MATCH_VERSION 8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
+#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
+#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
+#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
+#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000
+
+struct input_device_id {
+
+ kernel_ulong_t flags;
+
+ __u16 bustype;
+ __u16 vendor;
+ __u16 product;
+ __u16 version;
+
+ kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+
+ kernel_ulong_t driver_info;
+};
+
+/* EISA */
+
+#define EISA_SIG_LEN 8
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+ char sig[EISA_SIG_LEN];
+ kernel_ulong_t driver_data;
+};
+
+#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
+
+struct parisc_device_id {
+ __u8 hw_type; /* 5 bits used */
+ __u8 hversion_rev; /* 4 bits */
+ __u16 hversion; /* 12 bits */
+ __u32 sversion; /* 20 bits */
+};
+
+#define PA_HWTYPE_ANY_ID 0xff
+#define PA_HVERSION_REV_ANY_ID 0xff
+#define PA_HVERSION_ANY_ID 0xffff
+#define PA_SVERSION_ANY_ID 0xffffffff
+
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+ __u8 class; /* Standard interface or SDIO_ANY_ID */
+ __u16 vendor; /* Vendor or SDIO_ANY_ID */
+ __u16 device; /* Device ID or SDIO_ANY_ID */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+/* SSB core, see drivers/ssb/ */
+struct ssb_device_id {
+ __u16 vendor;
+ __u16 coreid;
+ __u8 revision;
+ __u8 __pad;
+} __attribute__((packed, aligned(2)));
+#define SSB_DEVICE(_vendor, _coreid, _revision) \
+ { .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
+
+#define SSB_ANY_VENDOR 0xFFFF
+#define SSB_ANY_ID 0xFFFF
+#define SSB_ANY_REV 0xFF
+
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+ __u16 manuf;
+ __u16 id;
+ __u8 rev;
+ __u8 class;
+} __attribute__((packed,aligned(2)));
+#define BCMA_CORE(_manuf, _id, _rev, _class) \
+ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+
+#define BCMA_ANY_MANUF 0xFFFF
+#define BCMA_ANY_ID 0xFFFF
+#define BCMA_ANY_REV 0xFF
+#define BCMA_ANY_CLASS 0xFF
+
+struct virtio_device_id {
+ __u32 device;
+ __u32 vendor;
+};
+#define VIRTIO_DEV_ANY_ID 0xffffffff
+
+/*
+ * For Hyper-V devices we use the device guid as the id.
+ */
+struct hv_vmbus_device_id {
+ __u8 guid[16];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+/* rpmsg */
+
+#define RPMSG_NAME_SIZE 32
+#define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s"
+
+struct rpmsg_device_id {
+ char name[RPMSG_NAME_SIZE];
+};
+
+/* i2c */
+
+#define I2C_NAME_SIZE 20
+#define I2C_MODULE_PREFIX "i2c:"
+
+struct i2c_device_id {
+ char name[I2C_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+/* spi */
+
+#define SPI_NAME_SIZE 32
+#define SPI_MODULE_PREFIX "spi:"
+
+struct spi_device_id {
+ char name[SPI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#define SPMI_NAME_SIZE 32
+#define SPMI_MODULE_PREFIX "spmi:"
+
+struct spmi_device_id {
+ char name[SPMI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+/* dmi */
+enum dmi_field {
+ DMI_NONE,
+ DMI_BIOS_VENDOR,
+ DMI_BIOS_VERSION,
+ DMI_BIOS_DATE,
+ DMI_SYS_VENDOR,
+ DMI_PRODUCT_NAME,
+ DMI_PRODUCT_VERSION,
+ DMI_PRODUCT_SERIAL,
+ DMI_PRODUCT_UUID,
+ DMI_BOARD_VENDOR,
+ DMI_BOARD_NAME,
+ DMI_BOARD_VERSION,
+ DMI_BOARD_SERIAL,
+ DMI_BOARD_ASSET_TAG,
+ DMI_CHASSIS_VENDOR,
+ DMI_CHASSIS_TYPE,
+ DMI_CHASSIS_VERSION,
+ DMI_CHASSIS_SERIAL,
+ DMI_CHASSIS_ASSET_TAG,
+ DMI_STRING_MAX,
+};
+
+struct dmi_strmatch {
+ unsigned char slot:7;
+ unsigned char exact_match:1;
+ char substr[79];
+};
+
+struct dmi_system_id {
+ int (*callback)(const struct dmi_system_id *);
+ const char *ident;
+ struct dmi_strmatch matches[4];
+ void *driver_data;
+};
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ * error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
+
+#define DMI_MATCH(a, b) { .slot = a, .substr = b }
+#define DMI_EXACT_MATCH(a, b) { .slot = a, .substr = b, .exact_match = 1 }
+
+#define PLATFORM_NAME_SIZE 20
+#define PLATFORM_MODULE_PREFIX "platform:"
+
+struct platform_device_id {
+ char name[PLATFORM_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#define MDIO_MODULE_PREFIX "mdio:"
+
+#define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
+#define MDIO_ID_ARGS(_id) \
+ (_id)>>31, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1, \
+ ((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
+ ((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
+ ((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
+ ((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
+ ((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
+ ((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
+ ((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
+
+/**
+ * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
+ * @phy_id: The result of
+ * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&PHYSID2)) & @phy_id_mask
+ * for this PHY type
+ * @phy_id_mask: Defines the significant bits of @phy_id. A value of 0
+ * is used to terminate an array of struct mdio_device_id.
+ */
+struct mdio_device_id {
+ __u32 phy_id;
+ __u32 phy_id_mask;
+};
+
+struct zorro_device_id {
+ __u32 id; /* Device ID or ZORRO_WILDCARD */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#define ZORRO_WILDCARD (0xffffffff) /* not official */
+
+#define ZORRO_DEVICE_MODALIAS_FMT "zorro:i%08X"
+
+#define ISAPNP_ANY_ID 0xffff
+struct isapnp_device_id {
+ unsigned short card_vendor, card_device;
+ unsigned short vendor, function;
+ kernel_ulong_t driver_data; /* data private to the driver */
+};
+
+/**
+ * struct amba_id - identifies a device on an AMBA bus
+ * @id: The significant bits if the hardware device ID
+ * @mask: Bitmask specifying which bits of the id field are significant when
+ * matching. A driver binds to a device when ((hardware device ID) & mask)
+ * == id.
+ * @data: Private data used by the driver.
+ */
+struct amba_id {
+ unsigned int id;
+ unsigned int mask;
+ void *data;
+};
+
+/**
+ * struct mips_cdmm_device_id - identifies devices in MIPS CDMM bus
+ * @type: Device type identifier.
+ */
+struct mips_cdmm_device_id {
+ __u8 type;
+};
+
+/*
+ * Match x86 CPUs for CPU specific drivers.
+ * See documentation of "x86_match_cpu" for details.
+ */
+
+/*
+ * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
+ * Although gcc seems to ignore this error, clang fails without this define.
+ */
+#define x86cpu_device_id x86_cpu_id
+struct x86_cpu_id {
+ __u16 vendor;
+ __u16 family;
+ __u16 model;
+ __u16 feature; /* bit index */
+ kernel_ulong_t driver_data;
+};
+
+#define X86_FEATURE_MATCH(x) \
+ { X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
+
+#define X86_VENDOR_ANY 0xffff
+#define X86_FAMILY_ANY 0
+#define X86_MODEL_ANY 0
+#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */
+
+/*
+ * Generic table type for matching CPU features.
+ * @feature: the bit number of the feature (0 - 65535)
+ */
+
+struct cpu_feature {
+ __u16 feature;
+};
+
+#define IPACK_ANY_FORMAT 0xff
+#define IPACK_ANY_ID (~0)
+struct ipack_device_id {
+ __u8 format; /* Format version or IPACK_ANY_ID */
+ __u32 vendor; /* Vendor ID or IPACK_ANY_ID */
+ __u32 device; /* Device ID or IPACK_ANY_ID */
+};
+
+#define MEI_CL_MODULE_PREFIX "mei:"
+#define MEI_CL_NAME_SIZE 32
+
+struct mei_cl_device_id {
+ char name[MEI_CL_NAME_SIZE];
+ kernel_ulong_t driver_info;
+};
+
+/* RapidIO */
+
+#define RIO_ANY_ID 0xffff
+
+/**
+ * struct rio_device_id - RIO device identifier
+ * @did: RapidIO device ID
+ * @vid: RapidIO vendor ID
+ * @asm_did: RapidIO assembly device ID
+ * @asm_vid: RapidIO assembly vendor ID
+ *
+ * Identifies a RapidIO device based on both the device/vendor IDs and
+ * the assembly device/vendor IDs.
+ */
+struct rio_device_id {
+ __u16 did, vid;
+ __u16 asm_did, asm_vid;
+};
+
+struct mcb_device_id {
+ __u16 device;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* LINUX_MOD_DEVICETABLE_H */
Code Review / kvmfornfv.git / blobdiff