--- /dev/null
+/*
+ * STMicroelectronics sensors library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_H
+#define ST_SENSORS_H
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/irqreturn.h>
+#include <linux/iio/trigger.h>
+#include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
+
+#define ST_SENSORS_TX_MAX_LENGTH 2
+#define ST_SENSORS_RX_MAX_LENGTH 6
+
+#define ST_SENSORS_ODR_LIST_MAX 10
+#define ST_SENSORS_FULLSCALE_AVL_MAX 10
+
+#define ST_SENSORS_NUMBER_ALL_CHANNELS 4
+#define ST_SENSORS_ENABLE_ALL_AXIS 0x07
+#define ST_SENSORS_SCAN_X 0
+#define ST_SENSORS_SCAN_Y 1
+#define ST_SENSORS_SCAN_Z 2
+#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01
+#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00
+#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f
+#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20
+#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07
+#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3
+
+#define ST_SENSORS_MAX_NAME 17
+#define ST_SENSORS_MAX_4WAI 7
+
+#define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
+ ch2, s, endian, rbits, sbits, addr) \
+{ \
+ .type = device_type, \
+ .modified = mod, \
+ .info_mask_separate = mask, \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = index, \
+ .channel2 = ch2, \
+ .address = addr, \
+ .scan_type = { \
+ .sign = s, \
+ .realbits = rbits, \
+ .shift = sbits - rbits, \
+ .storagebits = sbits, \
+ .endianness = endian, \
+ }, \
+}
+
+#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
+ IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
+ st_sensors_sysfs_sampling_frequency_avail)
+
+#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \
+ IIO_DEVICE_ATTR(name, S_IRUGO, \
+ st_sensors_sysfs_scale_avail, NULL , 0);
+
+struct st_sensor_odr_avl {
+ unsigned int hz;
+ u8 value;
+};
+
+struct st_sensor_odr {
+ u8 addr;
+ u8 mask;
+ struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
+};
+
+struct st_sensor_power {
+ u8 addr;
+ u8 mask;
+ u8 value_off;
+ u8 value_on;
+};
+
+struct st_sensor_axis {
+ u8 addr;
+ u8 mask;
+};
+
+struct st_sensor_fullscale_avl {
+ unsigned int num;
+ u8 value;
+ unsigned int gain;
+ unsigned int gain2;
+};
+
+struct st_sensor_fullscale {
+ u8 addr;
+ u8 mask;
+ struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
+};
+
+/**
+ * struct st_sensor_bdu - ST sensor device block data update
+ * @addr: address of the register.
+ * @mask: mask to write the block data update flag.
+ */
+struct st_sensor_bdu {
+ u8 addr;
+ u8 mask;
+};
+
+/**
+ * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
+ * @addr: address of the register.
+ * @mask_int1: mask to enable/disable IRQ on INT1 pin.
+ * @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * struct ig1 - represents the Interrupt Generator 1 of sensors.
+ * @en_addr: address of the enable ig1 register.
+ * @en_mask: mask to write the on/off value for enable.
+ */
+struct st_sensor_data_ready_irq {
+ u8 addr;
+ u8 mask_int1;
+ u8 mask_int2;
+ struct {
+ u8 en_addr;
+ u8 en_mask;
+ } ig1;
+};
+
+/**
+ * struct st_sensor_transfer_buffer - ST sensor device I/O buffer
+ * @buf_lock: Mutex to protect rx and tx buffers.
+ * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
+ * This buffer is used to avoid DMA not-aligned issue.
+ * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
+ * This buffer is used to avoid DMA not-aligned issue.
+ */
+struct st_sensor_transfer_buffer {
+ struct mutex buf_lock;
+ u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH];
+ u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned;
+};
+
+/**
+ * struct st_sensor_transfer_function - ST sensor device I/O function
+ * @read_byte: Function used to read one byte.
+ * @write_byte: Function used to write one byte.
+ * @read_multiple_byte: Function used to read multiple byte.
+ */
+struct st_sensor_transfer_function {
+ int (*read_byte) (struct st_sensor_transfer_buffer *tb,
+ struct device *dev, u8 reg_addr, u8 *res_byte);
+ int (*write_byte) (struct st_sensor_transfer_buffer *tb,
+ struct device *dev, u8 reg_addr, u8 data);
+ int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb,
+ struct device *dev, u8 reg_addr, int len, u8 *data,
+ bool multiread_bit);
+};
+
+/**
+ * struct st_sensor_settings - ST specific sensor settings
+ * @wai: Contents of WhoAmI register.
+ * @sensors_supported: List of supported sensors by struct itself.
+ * @ch: IIO channels for the sensor.
+ * @odr: Output data rate register and ODR list available.
+ * @pw: Power register of the sensor.
+ * @enable_axis: Enable one or more axis of the sensor.
+ * @fs: Full scale register and full scale list available.
+ * @bdu: Block data update register.
+ * @drdy_irq: Data ready register of the sensor.
+ * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
+ * @bootime: samples to discard when sensor passing from power-down to power-up.
+ */
+struct st_sensor_settings {
+ u8 wai;
+ char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
+ struct iio_chan_spec *ch;
+ int num_ch;
+ struct st_sensor_odr odr;
+ struct st_sensor_power pw;
+ struct st_sensor_axis enable_axis;
+ struct st_sensor_fullscale fs;
+ struct st_sensor_bdu bdu;
+ struct st_sensor_data_ready_irq drdy_irq;
+ bool multi_read_bit;
+ unsigned int bootime;
+};
+
+/**
+ * struct st_sensor_data - ST sensor device status
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @trig: The trigger in use by the core driver.
+ * @sensor_settings: Pointer to the specific sensor settings in use.
+ * @current_fullscale: Maximum range of measure by the sensor.
+ * @vdd: Pointer to sensor's Vdd power supply
+ * @vdd_io: Pointer to sensor's Vdd-IO power supply
+ * @enabled: Status of the sensor (false->off, true->on).
+ * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
+ * @buffer_data: Data used by buffer part.
+ * @odr: Output data rate of the sensor [Hz].
+ * num_data_channels: Number of data channels used in buffer.
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
+ * @tf: Transfer function structure used by I/O operations.
+ * @tb: Transfer buffers and mutex used by I/O operations.
+ */
+struct st_sensor_data {
+ struct device *dev;
+ struct iio_trigger *trig;
+ struct st_sensor_settings *sensor_settings;
+ struct st_sensor_fullscale_avl *current_fullscale;
+ struct regulator *vdd;
+ struct regulator *vdd_io;
+
+ bool enabled;
+ bool multiread_bit;
+
+ char *buffer_data;
+
+ unsigned int odr;
+ unsigned int num_data_channels;
+
+ u8 drdy_int_pin;
+
+ unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
+
+ const struct st_sensor_transfer_function *tf;
+ struct st_sensor_transfer_buffer tb;
+};
+
+#ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+ const struct iio_trigger_ops *trigger_ops);
+
+void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
+
+#else
+static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+ const struct iio_trigger_ops *trigger_ops)
+{
+ return 0;
+}
+static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
+{
+ return;
+}
+#endif
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata);
+
+int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
+
+void st_sensors_power_enable(struct iio_dev *indio_dev);
+
+void st_sensors_power_disable(struct iio_dev *indio_dev);
+
+int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
+
+int st_sensors_read_info_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val);
+
+int st_sensors_check_device_support(struct iio_dev *indio_dev,
+ int num_sensors_list, const struct st_sensor_settings *sensor_settings);
+
+ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+#endif /* ST_SENSORS_H */
Code Review / kvmfornfv.git / blobdiff