--- /dev/null
+/*
+ * include/linux/fsl_devices.h
+ *
+ * Definitions for any platform device related flags or structures for
+ * Freescale processor devices
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004,2012 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _FSL_DEVICE_H_
+#define _FSL_DEVICE_H_
+
+#define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI
+ PHY CLK to become stable - 10ms*/
+#define FSL_USB_PHY_CLK_TIMEOUT 10000 /* uSec */
+#define FSL_USB_VER_OLD 0
+#define FSL_USB_VER_1_6 1
+#define FSL_USB_VER_2_2 2
+#define FSL_USB_VER_2_4 3
+
+#include <linux/types.h>
+
+/*
+ * Some conventions on how we handle peripherals on Freescale chips
+ *
+ * unique device: a platform_device entry in fsl_plat_devs[] plus
+ * associated device information in its platform_data structure.
+ *
+ * A chip is described by a set of unique devices.
+ *
+ * Each sub-arch has its own master list of unique devices and
+ * enumerates them by enum fsl_devices in a sub-arch specific header
+ *
+ * The platform data structure is broken into two parts. The
+ * first is device specific information that help identify any
+ * unique features of a peripheral. The second is any
+ * information that may be defined by the board or how the device
+ * is connected externally of the chip.
+ *
+ * naming conventions:
+ * - platform data structures: <driver>_platform_data
+ * - platform data device flags: FSL_<driver>_DEV_<FLAG>
+ * - platform data board flags: FSL_<driver>_BRD_<FLAG>
+ *
+ */
+
+enum fsl_usb2_operating_modes {
+ FSL_USB2_MPH_HOST,
+ FSL_USB2_DR_HOST,
+ FSL_USB2_DR_DEVICE,
+ FSL_USB2_DR_OTG,
+};
+
+enum fsl_usb2_phy_modes {
+ FSL_USB2_PHY_NONE,
+ FSL_USB2_PHY_ULPI,
+ FSL_USB2_PHY_UTMI,
+ FSL_USB2_PHY_UTMI_WIDE,
+ FSL_USB2_PHY_SERIAL,
+};
+
+struct clk;
+struct platform_device;
+
+struct fsl_usb2_platform_data {
+ /* board specific information */
+ int controller_ver;
+ enum fsl_usb2_operating_modes operating_mode;
+ enum fsl_usb2_phy_modes phy_mode;
+ unsigned int port_enables;
+ unsigned int workaround;
+
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+ void __iomem *regs; /* ioremap'd register base */
+ struct clk *clk;
+ unsigned power_budget; /* hcd->power_budget */
+ unsigned big_endian_mmio:1;
+ unsigned big_endian_desc:1;
+ unsigned es:1; /* need USBMODE:ES */
+ unsigned le_setup_buf:1;
+ unsigned have_sysif_regs:1;
+ unsigned invert_drvvbus:1;
+ unsigned invert_pwr_fault:1;
+
+ unsigned suspended:1;
+ unsigned already_suspended:1;
+
+ /* register save area for suspend/resume */
+ u32 pm_command;
+ u32 pm_status;
+ u32 pm_intr_enable;
+ u32 pm_frame_index;
+ u32 pm_segment;
+ u32 pm_frame_list;
+ u32 pm_async_next;
+ u32 pm_configured_flag;
+ u32 pm_portsc;
+ u32 pm_usbgenctrl;
+};
+
+/* Flags in fsl_usb2_mph_platform_data */
+#define FSL_USB2_PORT0_ENABLED 0x00000001
+#define FSL_USB2_PORT1_ENABLED 0x00000002
+
+#define FLS_USB2_WORKAROUND_ENGCM09152 (1 << 0)
+
+struct spi_device;
+
+struct fsl_spi_platform_data {
+ u32 initial_spmode; /* initial SPMODE value */
+ s16 bus_num;
+ unsigned int flags;
+#define SPI_QE_CPU_MODE (1 << 0) /* QE CPU ("PIO") mode */
+#define SPI_CPM_MODE (1 << 1) /* CPM/QE ("DMA") mode */
+#define SPI_CPM1 (1 << 2) /* SPI unit is in CPM1 block */
+#define SPI_CPM2 (1 << 3) /* SPI unit is in CPM2 block */
+#define SPI_QE (1 << 4) /* SPI unit is in QE block */
+ /* board specific information */
+ u16 max_chipselect;
+ void (*cs_control)(struct spi_device *spi, bool on);
+ u32 sysclk;
+};
+
+struct mpc8xx_pcmcia_ops {
+ void(*hw_ctrl)(int slot, int enable);
+ int(*voltage_set)(int slot, int vcc, int vpp);
+};
+
+/* Returns non-zero if the current suspend operation would
+ * lead to a deep sleep (i.e. power removed from the core,
+ * instead of just the clock).
+ */
+#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
+int fsl_deep_sleep(void);
+#else
+static inline int fsl_deep_sleep(void) { return 0; }
+#endif
+
+#endif /* _FSL_DEVICE_H_ */
Code Review / kvmfornfv.git / blobdiff