--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Freescale DIU Frame Buffer device driver
+ *
+ * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ * Paul Widmer <paul.widmer@freescale.com>
+ * Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * York Sun <yorksun@freescale.com>
+ *
+ * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __FSL_DIU_FB_H__
+#define __FSL_DIU_FB_H__
+
+#include <linux/types.h>
+
+struct mfb_chroma_key {
+ int enable;
+ __u8 red_max;
+ __u8 green_max;
+ __u8 blue_max;
+ __u8 red_min;
+ __u8 green_min;
+ __u8 blue_min;
+};
+
+struct aoi_display_offset {
+ __s32 x_aoi_d;
+ __s32 y_aoi_d;
+};
+
+#define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key)
+#define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8)
+#define MFB_SET_ALPHA _IOW('M', 0, __u8)
+#define MFB_GET_ALPHA _IOR('M', 0, __u8)
+#define MFB_SET_AOID _IOW('M', 4, struct aoi_display_offset)
+#define MFB_GET_AOID _IOR('M', 4, struct aoi_display_offset)
+#define MFB_SET_PIXFMT _IOW('M', 8, __u32)
+#define MFB_GET_PIXFMT _IOR('M', 8, __u32)
+
+/*
+ * The MPC5121 BSP comes with a gamma_set utility that initializes the
+ * gamma table. Unfortunately, it uses bad values for the IOCTL commands,
+ * but there's nothing we can do about it now. These ioctls are only
+ * supported on the MPC5121.
+ */
+#define MFB_SET_GAMMA _IOW('M', 1, __u8)
+#define MFB_GET_GAMMA _IOR('M', 1, __u8)
+
+/*
+ * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the
+ * wrong value for 'size' field of the ioctl. The current macros above use the
+ * right size, but we still need to provide backwards compatibility, at least
+ * for a while.
+*/
+#define MFB_SET_PIXFMT_OLD 0x80014d08
+#define MFB_GET_PIXFMT_OLD 0x40014d08
+
+#ifdef __KERNEL__
+
+/*
+ * These are the fields of area descriptor(in DDR memory) for every plane
+ */
+struct diu_ad {
+ /* Word 0(32-bit) in DDR memory */
+/* __u16 comp; */
+/* __u16 pixel_s:2; */
+/* __u16 pallete:1; */
+/* __u16 red_c:2; */
+/* __u16 green_c:2; */
+/* __u16 blue_c:2; */
+/* __u16 alpha_c:3; */
+/* __u16 byte_f:1; */
+/* __u16 res0:3; */
+
+ __be32 pix_fmt; /* hard coding pixel format */
+
+ /* Word 1(32-bit) in DDR memory */
+ __le32 addr;
+
+ /* Word 2(32-bit) in DDR memory */
+/* __u32 delta_xs:11; */
+/* __u32 res1:1; */
+/* __u32 delta_ys:11; */
+/* __u32 res2:1; */
+/* __u32 g_alpha:8; */
+ __le32 src_size_g_alpha;
+
+ /* Word 3(32-bit) in DDR memory */
+/* __u32 delta_xi:11; */
+/* __u32 res3:5; */
+/* __u32 delta_yi:11; */
+/* __u32 res4:3; */
+/* __u32 flip:2; */
+ __le32 aoi_size;
+
+ /* Word 4(32-bit) in DDR memory */
+ /*__u32 offset_xi:11;
+ __u32 res5:5;
+ __u32 offset_yi:11;
+ __u32 res6:5;
+ */
+ __le32 offset_xyi;
+
+ /* Word 5(32-bit) in DDR memory */
+ /*__u32 offset_xd:11;
+ __u32 res7:5;
+ __u32 offset_yd:11;
+ __u32 res8:5; */
+ __le32 offset_xyd;
+
+
+ /* Word 6(32-bit) in DDR memory */
+ __u8 ckmax_r;
+ __u8 ckmax_g;
+ __u8 ckmax_b;
+ __u8 res9;
+
+ /* Word 7(32-bit) in DDR memory */
+ __u8 ckmin_r;
+ __u8 ckmin_g;
+ __u8 ckmin_b;
+ __u8 res10;
+/* __u32 res10:8; */
+
+ /* Word 8(32-bit) in DDR memory */
+ __le32 next_ad;
+
+ /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
+ __u32 paddr;
+} __attribute__ ((packed));
+
+/* DIU register map */
+struct diu {
+ __be32 desc[3];
+ __be32 gamma;
+ __be32 pallete;
+ __be32 cursor;
+ __be32 curs_pos;
+ __be32 diu_mode;
+ __be32 bgnd;
+ __be32 bgnd_wb;
+ __be32 disp_size;
+ __be32 wb_size;
+ __be32 wb_mem_addr;
+ __be32 hsyn_para;
+ __be32 vsyn_para;
+ __be32 syn_pol;
+ __be32 thresholds;
+ __be32 int_status;
+ __be32 int_mask;
+ __be32 colorbar[8];
+ __be32 filling;
+ __be32 plut;
+} __attribute__ ((packed));
+
+/*
+ * Modes of operation of DIU. The DIU supports five different modes, but
+ * the driver only supports modes 0 and 1.
+ */
+#define MFB_MODE0 0 /* DIU off */
+#define MFB_MODE1 1 /* All three planes output to display */
+
+#endif /* __KERNEL__ */
+#endif /* __FSL_DIU_FB_H__ */
Code Review / kvmfornfv.git / blobdiff