These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / include / linux / com20020.h

diff --git a/kernel/include/linux/com20020.h b/kernel/include/linux/com20020.h
deleted file mode 100644 (file)
index 8589899..0000000
--- a/kernel/include/linux/com20020.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Linux ARCnet driver - COM20020 chipset support - function declarations
- * 
- * Written 1997 by David Woodhouse.
- * Written 1994-1999 by Avery Pennarun.
- * Derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- *  for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency.  This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#ifndef __COM20020_H
-#define __COM20020_H
-
-int com20020_check(struct net_device *dev);
-int com20020_found(struct net_device *dev, int shared);
-extern const struct net_device_ops com20020_netdev_ops;
-
-/* The number of low I/O ports used by the card. */
-#define ARCNET_TOTAL_SIZE 8
-
-/* various register addresses */
-#ifdef CONFIG_SA1100_CT6001
-#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
-#else
-#define BUS_ALIGN  1
-#endif
-
-#define PLX_PCI_MAX_CARDS 2
-
-struct com20020_pci_channel_map {
-       u32 bar;
-       u32 offset;
-       u32 size;               /* 0x00 - auto, e.g. length of entire bar */
-};
-
-struct com20020_pci_card_info {
-       const char *name;
-       int devcount;
-
-       struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS];
-
-       unsigned int flags;
-};
-
-struct com20020_priv {
-       struct com20020_pci_card_info *ci;
-       struct list_head list_dev;
-};
-
-struct com20020_dev {
-       struct list_head list;
-       struct net_device *dev;
-
-       struct com20020_priv *pci_priv;
-       int index;
-};
-
-#define _INTMASK  (ioaddr+BUS_ALIGN*0) /* writable */
-#define _STATUS   (ioaddr+BUS_ALIGN*0) /* readable */
-#define _COMMAND  (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */
-#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */
-#define _ADDR_HI  (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */
-#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
-#define _MEMDATA  (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */
-#define _SUBADR   (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */
-#define _CONFIG   (ioaddr+BUS_ALIGN*6) /* configuration register */
-#define _XREG     (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG
-                                       or _SUBADR) */
-
-/* in the ADDR_HI register */
-#define RDDATAflag     0x80    /* next access is a read (not a write) */
-
-/* in the DIAGSTAT register */
-#define NEWNXTIDflag   0x02    /* ID to which token is passed has changed */
-
-/* in the CONFIG register */
-#define RESETcfg       0x80    /* put card in reset state */
-#define TXENcfg                0x20    /* enable TX */
-
-/* in SETUP register */
-#define PROMISCset     0x10    /* enable RCV_ALL */
-#define P1MODE         0x80    /* enable P1-MODE for Backplane */
-#define SLOWARB                0x01    /* enable Slow Arbitration for >=5Mbps */
-
-/* COM2002x */
-#define SUB_TENTATIVE  0       /* tentative node ID */
-#define SUB_NODE       1       /* node ID */
-#define SUB_SETUP1     2       /* various options */
-#define SUB_TEST       3       /* test/diag register */
-
-/* COM20022 only */
-#define SUB_SETUP2     4       /* sundry options */
-#define SUB_BUSCTL     5       /* bus control options */
-#define SUB_DMACOUNT   6       /* DMA count options */
-
-#define SET_SUBADR(x) do { \
-       if ((x) < 4) \
-       { \
-               lp->config = (lp->config & ~0x03) | (x); \
-               SETCONF; \
-       } \
-       else \
-       { \
-               outb(x, _SUBADR); \
-       } \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
-                   udelay(5);                        \
-                   outb(lp->config , _CONFIG);       \
-                  }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
-                   udelay(5);                       \
-                   outb(0x18 , _CONFIG);            \
-                  }
-
-#define ASTATUS()      inb(_STATUS)
-#define ADIAGSTATUS()  inb(_DIAGSTAT)
-#define ACOMMAND(cmd)  outb((cmd),_COMMAND)
-#define AINTMASK(msk)  outb((msk),_INTMASK)
-
-#define SETCONF                outb(lp->config, _CONFIG)
-
-#endif /* __COM20020_H */