Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / fs / Makefile

diff --git a/kernel/fs/Makefile b/kernel/fs/Makefile
new file mode 100644 (file)
index 0000000..cb92fd4
--- /dev/null
+++ b/kernel/fs/Makefile
@@ -0,0 +1,129 @@
+#
+# Makefile for the Linux filesystems.
+#
+# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+# 
+
+obj-y :=       open.o read_write.o file_table.o super.o \
+               char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
+               ioctl.o readdir.o select.o dcache.o inode.o \
+               attr.o bad_inode.o file.o filesystems.o namespace.o \
+               seq_file.o xattr.o libfs.o fs-writeback.o \
+               pnode.o splice.o sync.o utimes.o \
+               stack.o fs_struct.o statfs.o fs_pin.o nsfs.o
+
+ifeq ($(CONFIG_BLOCK),y)
+obj-y +=       buffer.o block_dev.o direct-io.o mpage.o
+else
+obj-y +=       no-block.o
+endif
+
+obj-$(CONFIG_PROC_FS) += proc_namespace.o
+
+obj-y                          += notify/
+obj-$(CONFIG_EPOLL)            += eventpoll.o
+obj-$(CONFIG_ANON_INODES)      += anon_inodes.o
+obj-$(CONFIG_SIGNALFD)         += signalfd.o
+obj-$(CONFIG_TIMERFD)          += timerfd.o
+obj-$(CONFIG_EVENTFD)          += eventfd.o
+obj-$(CONFIG_AIO)               += aio.o
+obj-$(CONFIG_FS_DAX)           += dax.o
+obj-$(CONFIG_FILE_LOCKING)      += locks.o
+obj-$(CONFIG_COMPAT)           += compat.o compat_ioctl.o
+obj-$(CONFIG_BINFMT_AOUT)      += binfmt_aout.o
+obj-$(CONFIG_BINFMT_EM86)      += binfmt_em86.o
+obj-$(CONFIG_BINFMT_MISC)      += binfmt_misc.o
+obj-$(CONFIG_BINFMT_SCRIPT)    += binfmt_script.o
+obj-$(CONFIG_BINFMT_ELF)       += binfmt_elf.o
+obj-$(CONFIG_COMPAT_BINFMT_ELF)        += compat_binfmt_elf.o
+obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
+obj-$(CONFIG_BINFMT_FLAT)      += binfmt_flat.o
+
+obj-$(CONFIG_FS_MBCACHE)       += mbcache.o
+obj-$(CONFIG_FS_POSIX_ACL)     += posix_acl.o
+obj-$(CONFIG_NFS_COMMON)       += nfs_common/
+obj-$(CONFIG_COREDUMP)         += coredump.o
+obj-$(CONFIG_SYSCTL)           += drop_caches.o
+
+obj-$(CONFIG_FHANDLE)          += fhandle.o
+
+obj-y                          += quota/
+
+obj-$(CONFIG_PROC_FS)          += proc/
+obj-$(CONFIG_KERNFS)           += kernfs/
+obj-$(CONFIG_SYSFS)            += sysfs/
+obj-$(CONFIG_CONFIGFS_FS)      += configfs/
+obj-y                          += devpts/
+
+obj-$(CONFIG_PROFILING)                += dcookies.o
+obj-$(CONFIG_DLM)              += dlm/
+ 
+# Do not add any filesystems before this line
+obj-$(CONFIG_FSCACHE)          += fscache/
+obj-$(CONFIG_REISERFS_FS)      += reiserfs/
+obj-$(CONFIG_EXT3_FS)          += ext3/ # Before ext2 so root fs can be ext3
+obj-$(CONFIG_EXT2_FS)          += ext2/
+# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+# unless explicitly requested by rootfstype
+obj-$(CONFIG_EXT4_FS)          += ext4/
+obj-$(CONFIG_JBD)              += jbd/
+obj-$(CONFIG_JBD2)             += jbd2/
+obj-$(CONFIG_CRAMFS)           += cramfs/
+obj-$(CONFIG_SQUASHFS)         += squashfs/
+obj-y                          += ramfs/
+obj-$(CONFIG_HUGETLBFS)                += hugetlbfs/
+obj-$(CONFIG_CODA_FS)          += coda/
+obj-$(CONFIG_MINIX_FS)         += minix/
+obj-$(CONFIG_FAT_FS)           += fat/
+obj-$(CONFIG_BFS_FS)           += bfs/
+obj-$(CONFIG_ISO9660_FS)       += isofs/
+obj-$(CONFIG_HFSPLUS_FS)       += hfsplus/ # Before hfs to find wrapped HFS+
+obj-$(CONFIG_HFS_FS)           += hfs/
+obj-$(CONFIG_ECRYPT_FS)                += ecryptfs/
+obj-$(CONFIG_VXFS_FS)          += freevxfs/
+obj-$(CONFIG_NFS_FS)           += nfs/
+obj-$(CONFIG_EXPORTFS)         += exportfs/
+obj-$(CONFIG_NFSD)             += nfsd/
+obj-$(CONFIG_LOCKD)            += lockd/
+obj-$(CONFIG_NLS)              += nls/
+obj-$(CONFIG_SYSV_FS)          += sysv/
+obj-$(CONFIG_CIFS)             += cifs/
+obj-$(CONFIG_NCP_FS)           += ncpfs/
+obj-$(CONFIG_HPFS_FS)          += hpfs/
+obj-$(CONFIG_NTFS_FS)          += ntfs/
+obj-$(CONFIG_UFS_FS)           += ufs/
+obj-$(CONFIG_EFS_FS)           += efs/
+obj-$(CONFIG_JFFS2_FS)         += jffs2/
+obj-$(CONFIG_LOGFS)            += logfs/
+obj-$(CONFIG_UBIFS_FS)         += ubifs/
+obj-$(CONFIG_AFFS_FS)          += affs/
+obj-$(CONFIG_ROMFS_FS)         += romfs/
+obj-$(CONFIG_QNX4FS_FS)                += qnx4/
+obj-$(CONFIG_QNX6FS_FS)                += qnx6/
+obj-$(CONFIG_AUTOFS4_FS)       += autofs4/
+obj-$(CONFIG_ADFS_FS)          += adfs/
+obj-$(CONFIG_FUSE_FS)          += fuse/
+obj-$(CONFIG_OVERLAY_FS)       += overlayfs/
+obj-$(CONFIG_UDF_FS)           += udf/
+obj-$(CONFIG_SUN_OPENPROMFS)   += openpromfs/
+obj-$(CONFIG_OMFS_FS)          += omfs/
+obj-$(CONFIG_JFS_FS)           += jfs/
+obj-$(CONFIG_XFS_FS)           += xfs/
+obj-$(CONFIG_9P_FS)            += 9p/
+obj-$(CONFIG_AFS_FS)           += afs/
+obj-$(CONFIG_NILFS2_FS)                += nilfs2/
+obj-$(CONFIG_BEFS_FS)          += befs/
+obj-$(CONFIG_HOSTFS)           += hostfs/
+obj-$(CONFIG_HPPFS)            += hppfs/
+obj-$(CONFIG_CACHEFILES)       += cachefiles/
+obj-$(CONFIG_DEBUG_FS)         += debugfs/
+obj-$(CONFIG_TRACING)          += tracefs/
+obj-$(CONFIG_OCFS2_FS)         += ocfs2/
+obj-$(CONFIG_BTRFS_FS)         += btrfs/
+obj-$(CONFIG_GFS2_FS)           += gfs2/
+obj-$(CONFIG_F2FS_FS)          += f2fs/
+obj-y                          += exofs/ # Multiple modules
+obj-$(CONFIG_CEPH_FS)          += ceph/
+obj-$(CONFIG_PSTORE)           += pstore/
+obj-$(CONFIG_EFIVAR_FS)                += efivarfs/