--- /dev/null
+#
+# USB Storage driver configuration
+#
+
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
+
+config USB_STORAGE
+ tristate "USB Mass Storage support"
+ depends on SCSI
+ ---help---
+ Say Y here if you want to connect USB mass storage devices to your
+ computer's USB port. This is the driver you need for USB
+ floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
+ USB flash devices, and memory sticks, along with
+ similar devices. This driver may also be used for some cameras
+ and card readers.
+
+ This option depends on 'SCSI' support being enabled, but you
+ probably also need 'SCSI device support: SCSI disk support'
+ (BLK_DEV_SD) for most USB storage devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usb-storage.
+
+config USB_STORAGE_DEBUG
+ bool "USB Mass Storage verbose debug"
+ depends on USB_STORAGE
+ help
+ Say Y here in order to have the USB Mass Storage code generate
+ verbose debugging messages.
+
+config USB_STORAGE_REALTEK
+ tristate "Realtek Card Reader support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the power-saving function
+ for Realtek RTS51xx USB card readers.
+
+ If this driver is compiled as a module, it will be named ums-realtek.
+
+config REALTEK_AUTOPM
+ bool "Realtek Card Reader autosuspend support"
+ depends on USB_STORAGE_REALTEK && PM
+ default y
+
+config USB_STORAGE_DATAFAB
+ tristate "Datafab Compact Flash Reader support"
+ depends on USB_STORAGE
+ help
+ Support for certain Datafab CompactFlash readers.
+ Datafab has a web page at <http://www.datafab.com/>.
+
+ If this driver is compiled as a module, it will be named ums-datafab.
+
+config USB_STORAGE_FREECOM
+ tristate "Freecom USB/ATAPI Bridge support"
+ depends on USB_STORAGE
+ help
+ Support for the Freecom USB to IDE/ATAPI adaptor.
+ Freecom has a web page at <http://www.freecom.de/>.
+
+ If this driver is compiled as a module, it will be named ums-freecom.
+
+config USB_STORAGE_ISD200
+ tristate "ISD-200 USB/ATA Bridge support"
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you want to use USB Mass Store devices based
+ on the In-Systems Design ISD-200 USB/ATA bridge.
+
+ Some of the products that use this chip are:
+
+ - Archos Jukebox 6000
+ - ISD SmartCable for Storage
+ - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
+ - Sony CRX10U CD-R/RW drive
+ - CyQ've CQ8060A CDRW drive
+ - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
+
+ If this driver is compiled as a module, it will be named ums-isd200.
+
+config USB_STORAGE_USBAT
+ tristate "USBAT/USBAT02-based storage support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support storage devices
+ based on the SCM/Shuttle USBAT/USBAT02 processors.
+
+ Devices reported to work with this driver include:
+ - CompactFlash reader included with Kodak DC3800 camera
+ - Dane-Elec Zmate CompactFlash reader
+ - Delkin Efilm reader2
+ - HP 8200e/8210e/8230e CD-Writer Plus drives
+ - I-JAM JS-50U
+ - Jessops CompactFlash JESDCFRU BLACK
+ - Kingston Technology PCREAD-USB/CF
+ - Maxell UA4 CompactFlash reader
+ - Memorex UCF-100
+ - Microtech ZiO! ICS-45 CF2
+ - RCA LYRA MP3 portable
+ - Sandisk ImageMate SDDR-05b
+
+ If this driver is compiled as a module, it will be named ums-usbat.
+
+config USB_STORAGE_SDDR09
+ tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Sandisk SDDR-09
+ SmartMedia reader in the USB Mass Storage driver.
+ Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
+
+ If this driver is compiled as a module, it will be named ums-sddr09.
+
+config USB_STORAGE_SDDR55
+ tristate "SanDisk SDDR-55 SmartMedia support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Sandisk SDDR-55
+ SmartMedia reader in the USB Mass Storage driver.
+
+ If this driver is compiled as a module, it will be named ums-sddr55.
+
+config USB_STORAGE_JUMPSHOT
+ tristate "Lexar Jumpshot Compact Flash Reader"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Lexar Jumpshot
+ USB CompactFlash reader.
+
+ If this driver is compiled as a module, it will be named ums-jumpshot.
+
+config USB_STORAGE_ALAUDA
+ tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Olympus MAUSB-10
+ and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+ These devices are based on the Alauda chip and support both
+ XD and SmartMedia cards.
+
+ If this driver is compiled as a module, it will be named ums-alauda.
+
+config USB_STORAGE_ONETOUCH
+ tristate "Support OneTouch Button on Maxtor Hard Drives"
+ depends on USB_STORAGE
+ depends on INPUT=y || INPUT=USB_STORAGE
+ help
+ Say Y here to include additional code to support the Maxtor OneTouch
+ USB hard drive's onetouch button.
+
+ This code registers the button on the front of Maxtor OneTouch USB
+ hard drive's as an input device. An action can be associated with
+ this input in any keybinding software. (e.g. gnome's keyboard short-
+ cuts)
+
+ If this driver is compiled as a module, it will be named ums-onetouch.
+
+config USB_STORAGE_KARMA
+ tristate "Support for Rio Karma music player"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Rio Karma
+ USB interface.
+
+ This code places the Rio Karma into mass storage mode, enabling
+ it to be mounted as an ordinary filesystem. Performing an eject
+ on the resulting scsi device node returns the Karma to normal
+ operation.
+
+ If this driver is compiled as a module, it will be named ums-karma.
+
+config USB_STORAGE_CYPRESS_ATACB
+ tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you want to use SAT (ata pass through) on devices based
+ on the Cypress USB/ATA bridge supporting ATACB. This will allow you
+ to use tools to tune and monitor your drive (like hdparm or smartctl).
+
+ If you say no here your device will still work with the standard usb
+ mass storage class.
+
+ If this driver is compiled as a module, it will be named ums-cypress.
+
+config USB_STORAGE_ENE_UB6250
+ tristate "USB ENE card reader support"
+ depends on SCSI
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you wish to control a ENE SD/MS Card reader.
+ Note that this driver does not support SM cards.
+
+ This option depends on 'SCSI' support being enabled, but you
+ probably also need 'SCSI device support: SCSI disk support'
+ (BLK_DEV_SD) for most USB storage devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ums-eneub6250.
+
+config USB_UAS
+ tristate "USB Attached SCSI"
+ depends on SCSI && USB_STORAGE
+ help
+ The USB Attached SCSI protocol is supported by some USB
+ storage devices. It permits higher performance by supporting
+ multiple outstanding commands.
+
+ If you don't know whether you have a UAS device, it is safe to
+ say 'Y' or 'M' here and the kernel will use the right driver.
+
+ If you compile this driver as a module, it will be named uas.
Code Review / kvmfornfv.git / blobdiff