Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / usb / serial / kobil_sct.h

diff --git a/kernel/drivers/usb/serial/kobil_sct.h b/kernel/drivers/usb/serial/kobil_sct.h
new file mode 100644 (file)
index 0000000..be207f7
--- /dev/null
+++ b/kernel/drivers/usb/serial/kobil_sct.h
@@ -0,0 +1,77 @@
+#define SUSBCRequest_SetBaudRateParityAndStopBits       1
+#define SUSBCR_SBR_MASK                                0xFF00
+#define SUSBCR_SBR_1200                                0x0100
+#define SUSBCR_SBR_9600                                0x0200
+#define SUSBCR_SBR_19200                       0x0400
+#define SUSBCR_SBR_28800                       0x0800
+#define SUSBCR_SBR_38400                       0x1000
+#define SUSBCR_SBR_57600                       0x2000
+#define SUSBCR_SBR_115200                      0x4000
+
+#define SUSBCR_SPASB_MASK                      0x0070
+#define SUSBCR_SPASB_NoParity                  0x0010
+#define SUSBCR_SPASB_OddParity                 0x0020
+#define SUSBCR_SPASB_EvenParity                        0x0040
+
+#define SUSBCR_SPASB_STPMASK                   0x0003
+#define SUSBCR_SPASB_1StopBit                  0x0001
+#define SUSBCR_SPASB_2StopBits                 0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues    2
+#define SUSBCR_SSL_SETRTS                      0x0001
+#define SUSBCR_SSL_CLRRTS                      0x0002
+#define SUSBCR_SSL_SETDTR                      0x0004
+#define SUSBCR_SSL_CLRDTR                      0x0010
+
+/* Kill the pending/current writes to the comm port. */
+#define SUSBCR_SSL_PURGE_TXABORT               0x0100
+/* Kill the pending/current reads to the comm port. */
+#define SUSBCR_SSL_PURGE_RXABORT               0x0200
+/* Kill the transmit queue if there. */
+#define SUSBCR_SSL_PURGE_TXCLEAR               0x0400
+/* Kill the typeahead buffer if there. */
+#define SUSBCR_SSL_PURGE_RXCLEAR               0x0800
+
+#define SUSBCRequest_GetStatusLineState                4
+/* Any Character received */
+#define SUSBCR_GSL_RXCHAR                      0x0001
+/* Transmitt Queue Empty */
+#define SUSBCR_GSL_TXEMPTY                     0x0004
+/* CTS changed state */
+#define SUSBCR_GSL_CTS                         0x0008
+/* DSR changed state */
+#define SUSBCR_GSL_DSR                         0x0010
+/* RLSD changed state */
+#define SUSBCR_GSL_RLSD                                0x0020
+/* BREAK received */
+#define SUSBCR_GSL_BREAK                       0x0040
+/* Line status error occurred */
+#define SUSBCR_GSL_ERR                         0x0080
+/* Ring signal detected */
+#define SUSBCR_GSL_RING                                0x0100
+
+#define SUSBCRequest_Misc                      8
+/* use a predefined reset sequence */
+#define SUSBCR_MSC_ResetReader                 0x0001
+/* use a predefined sequence to reset the internal queues */
+#define SUSBCR_MSC_ResetAllQueues              0x0002
+
+#define SUSBCRequest_GetMisc                   0x10
+
+/*
+ * get the firmware version from device, coded like this 0xHHLLBBPP with
+ * HH = Firmware Version High Byte
+ * LL = Firmware Version Low Byte
+ * BB = Build Number
+ * PP = Further Attributes
+ */
+#define SUSBCR_MSC_GetFWVersion                        0x0001
+
+/*
+ * get the hardware version from device coded like this 0xHHLLPPRR with
+ * HH = Software Version High Byte
+ * LL = Software Version Low Byte
+ * PP = Further Attributes
+ * RR = Reserved for the hardware ID
+ */
+#define SUSBCR_MSC_GetHWVersion                        0x0002