--- /dev/null
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+void musb_host_finish_resume(struct work_struct *work)
+{
+ struct musb *musb;
+ unsigned long flags;
+ u8 power;
+
+ musb = container_of(work, struct musb, finish_resume_work.work);
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ power = musb_readb(musb->mregs, MUSB_POWER);
+ power &= ~MUSB_POWER_RESUME;
+ dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+ power);
+ musb_writeb(musb->mregs, MUSB_POWER, power);
+
+ /*
+ * ISSUE: DaVinci (RTL 1.300) disconnects after
+ * resume of high speed peripherals (but not full
+ * speed ones).
+ */
+ musb->is_active = 1;
+ musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+ musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+ usb_hcd_poll_rh_status(musb->hcd);
+ /* NOTE: it might really be A_WAIT_BCON ... */
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+ struct usb_otg *otg = musb->xceiv->otg;
+ u8 power;
+ void __iomem *mbase = musb->mregs;
+
+ if (!is_host_active(musb))
+ return;
+
+ /* NOTE: this doesn't necessarily put PHY into low power mode,
+ * turning off its clock; that's a function of PHY integration and
+ * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect
+ * SE0 changing to connect (J) or wakeup (K) states.
+ */
+ power = musb_readb(mbase, MUSB_POWER);
+ if (do_suspend) {
+ int retries = 10000;
+
+ power &= ~MUSB_POWER_RESUME;
+ power |= MUSB_POWER_SUSPENDM;
+ musb_writeb(mbase, MUSB_POWER, power);
+
+ /* Needed for OPT A tests */
+ power = musb_readb(mbase, MUSB_POWER);
+ while (power & MUSB_POWER_SUSPENDM) {
+ power = musb_readb(mbase, MUSB_POWER);
+ if (retries-- < 1)
+ break;
+ }
+
+ dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
+
+ musb->port1_status |= USB_PORT_STAT_SUSPEND;
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_HOST:
+ musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
+ musb->is_active = otg->host->b_hnp_enable;
+ if (musb->is_active)
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_A_AIDL_BDIS));
+ musb_platform_try_idle(musb, 0);
+ break;
+ case OTG_STATE_B_HOST:
+ musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
+ musb->is_active = otg->host->b_hnp_enable;
+ musb_platform_try_idle(musb, 0);
+ break;
+ default:
+ dev_dbg(musb->controller, "bogus rh suspend? %s\n",
+ usb_otg_state_string(musb->xceiv->otg->state));
+ }
+ } else if (power & MUSB_POWER_SUSPENDM) {
+ power &= ~MUSB_POWER_SUSPENDM;
+ power |= MUSB_POWER_RESUME;
+ musb_writeb(mbase, MUSB_POWER, power);
+
+ dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
+
+ /* later, GetPortStatus will stop RESUME signaling */
+ musb->port1_status |= MUSB_PORT_STAT_RESUME;
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
+ }
+}
+
+void musb_port_reset(struct musb *musb, bool do_reset)
+{
+ u8 power;
+ void __iomem *mbase = musb->mregs;
+
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) {
+ dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
+ musb->port1_status &= ~USB_PORT_STAT_RESET;
+ return;
+ }
+
+ if (!is_host_active(musb))
+ return;
+
+ /* NOTE: caller guarantees it will turn off the reset when
+ * the appropriate amount of time has passed
+ */
+ power = musb_readb(mbase, MUSB_POWER);
+ if (do_reset) {
+ /*
+ * If RESUME is set, we must make sure it stays minimum 20 ms.
+ * Then we must clear RESUME and wait a bit to let musb start
+ * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+ * fail with "Error! Did not receive an SOF before suspend
+ * detected".
+ */
+ if (power & MUSB_POWER_RESUME) {
+ long remain = (unsigned long) musb->rh_timer - jiffies;
+
+ if (musb->rh_timer > 0 && remain > 0) {
+ /* take into account the minimum delay after resume */
+ schedule_delayed_work(
+ &musb->deassert_reset_work, remain);
+ return;
+ }
+
+ musb_writeb(mbase, MUSB_POWER,
+ power & ~MUSB_POWER_RESUME);
+
+ /* Give the core 1 ms to clear MUSB_POWER_RESUME */
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(1));
+ return;
+ }
+
+ power &= 0xf0;
+ musb_writeb(mbase, MUSB_POWER,
+ power | MUSB_POWER_RESET);
+
+ musb->port1_status |= USB_PORT_STAT_RESET;
+ musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(50));
+ } else {
+ dev_dbg(musb->controller, "root port reset stopped\n");
+ musb_writeb(mbase, MUSB_POWER,
+ power & ~MUSB_POWER_RESET);
+
+ power = musb_readb(mbase, MUSB_POWER);
+ if (power & MUSB_POWER_HSMODE) {
+ dev_dbg(musb->controller, "high-speed device connected\n");
+ musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+ }
+
+ musb->port1_status &= ~USB_PORT_STAT_RESET;
+ musb->port1_status |= USB_PORT_STAT_ENABLE
+ | (USB_PORT_STAT_C_RESET << 16)
+ | (USB_PORT_STAT_C_ENABLE << 16);
+ usb_hcd_poll_rh_status(musb->hcd);
+
+ musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+ }
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+ struct usb_otg *otg = musb->xceiv->otg;
+
+ musb->port1_status = USB_PORT_STAT_POWER
+ | (USB_PORT_STAT_C_CONNECTION << 16);
+
+ usb_hcd_poll_rh_status(musb->hcd);
+ musb->is_active = 0;
+
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_SUSPEND:
+ if (otg->host->b_hnp_enable) {
+ musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
+ musb->g.is_a_peripheral = 1;
+ break;
+ }
+ /* FALLTHROUGH */
+ case OTG_STATE_A_HOST:
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+ musb->is_active = 0;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ break;
+ default:
+ dev_dbg(musb->controller, "host disconnect (%s)\n",
+ usb_otg_state_string(musb->xceiv->otg->state));
+ }
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct musb *musb = hcd_to_musb(hcd);
+ int retval = 0;
+
+ /* called in_irq() via usb_hcd_poll_rh_status() */
+ if (musb->port1_status & 0xffff0000) {
+ *buf = 0x02;
+ retval = 1;
+ }
+ return retval;
+}
+
+static int musb_has_gadget(struct musb *musb)
+{
+ /*
+ * In host-only mode we start a connection right away. In OTG mode
+ * we have to wait until we loaded a gadget. We don't really need a
+ * gadget if we operate as a host but we should not start a session
+ * as a device without a gadget or else we explode.
+ */
+#ifdef CONFIG_USB_MUSB_HOST
+ return 1;
+#else
+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
+ return 1;
+ return musb->g.dev.driver != NULL;
+#endif
+}
+
+int musb_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength)
+{
+ struct musb *musb = hcd_to_musb(hcd);
+ u32 temp;
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
+ spin_unlock_irqrestore(&musb->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+ /* hub features: always zero, setting is a NOP
+ * port features: reported, sometimes updated when host is active
+ * no indicators
+ */
+ switch (typeReq) {
+ case ClearHubFeature:
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if ((wIndex & 0xff) != 1)
+ goto error;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ musb_port_suspend(musb, false);
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (!hcd->self.is_b_host)
+ musb_platform_set_vbus(musb, 0);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ case USB_PORT_FEAT_C_RESET:
+ case USB_PORT_FEAT_C_SUSPEND:
+ break;
+ default:
+ goto error;
+ }
+ dev_dbg(musb->controller, "clear feature %d\n", wValue);
+ musb->port1_status &= ~(1 << wValue);
+ break;
+ case GetHubDescriptor:
+ {
+ struct usb_hub_descriptor *desc = (void *)buf;
+
+ desc->bDescLength = 9;
+ desc->bDescriptorType = USB_DT_HUB;
+ desc->bNbrPorts = 1;
+ desc->wHubCharacteristics = cpu_to_le16(
+ HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
+ | HUB_CHAR_NO_OCPM /* no overcurrent reporting */
+ );
+ desc->bPwrOn2PwrGood = 5; /* msec/2 */
+ desc->bHubContrCurrent = 0;
+
+ /* workaround bogus struct definition */
+ desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */
+ desc->u.hs.DeviceRemovable[1] = 0xff;
+ }
+ break;
+ case GetHubStatus:
+ temp = 0;
+ *(__le32 *) buf = cpu_to_le32(temp);
+ break;
+ case GetPortStatus:
+ if (wIndex != 1)
+ goto error;
+
+ put_unaligned(cpu_to_le32(musb->port1_status
+ & ~MUSB_PORT_STAT_RESUME),
+ (__le32 *) buf);
+
+ /* port change status is more interesting */
+ dev_dbg(musb->controller, "port status %08x\n",
+ musb->port1_status);
+ break;
+ case SetPortFeature:
+ if ((wIndex & 0xff) != 1)
+ goto error;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
+ /* NOTE: this controller has a strange state machine
+ * that involves "requesting sessions" according to
+ * magic side effects from incompletely-described
+ * rules about startup...
+ *
+ * This call is what really starts the host mode; be
+ * very careful about side effects if you reorder any
+ * initialization logic, e.g. for OTG, or change any
+ * logic relating to VBUS power-up.
+ */
+ if (!hcd->self.is_b_host && musb_has_gadget(musb))
+ musb_start(musb);
+ break;
+ case USB_PORT_FEAT_RESET:
+ musb_port_reset(musb, true);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ musb_port_suspend(musb, true);
+ break;
+ case USB_PORT_FEAT_TEST:
+ if (unlikely(is_host_active(musb)))
+ goto error;
+
+ wIndex >>= 8;
+ switch (wIndex) {
+ case 1:
+ pr_debug("TEST_J\n");
+ temp = MUSB_TEST_J;
+ break;
+ case 2:
+ pr_debug("TEST_K\n");
+ temp = MUSB_TEST_K;
+ break;
+ case 3:
+ pr_debug("TEST_SE0_NAK\n");
+ temp = MUSB_TEST_SE0_NAK;
+ break;
+ case 4:
+ pr_debug("TEST_PACKET\n");
+ temp = MUSB_TEST_PACKET;
+ musb_load_testpacket(musb);
+ break;
+ case 5:
+ pr_debug("TEST_FORCE_ENABLE\n");
+ temp = MUSB_TEST_FORCE_HOST
+ | MUSB_TEST_FORCE_HS;
+
+ musb_writeb(musb->mregs, MUSB_DEVCTL,
+ MUSB_DEVCTL_SESSION);
+ break;
+ case 6:
+ pr_debug("TEST_FIFO_ACCESS\n");
+ temp = MUSB_TEST_FIFO_ACCESS;
+ break;
+ default:
+ goto error;
+ }
+ musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+ break;
+ default:
+ goto error;
+ }
+ dev_dbg(musb->controller, "set feature %d\n", wValue);
+ musb->port1_status |= 1 << wValue;
+ break;
+
+ default:
+error:
+ /* "protocol stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+ return retval;
+}
Code Review / kvmfornfv.git / blobdiff