--- /dev/null
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/*
+ * Tilera TILE-Gx USB EHCI host controller driver.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/usb/tilegx.h>
+#include <linux/usb.h>
+
+#include <asm/homecache.h>
+
+#include <gxio/iorpc_usb_host.h>
+#include <gxio/usb_host.h>
+
+static void tilegx_start_ehc(void)
+{
+}
+
+static void tilegx_stop_ehc(void)
+{
+}
+
+static int tilegx_ehci_setup(struct usb_hcd *hcd)
+{
+ int ret = ehci_init(hcd);
+
+ /*
+ * Some drivers do:
+ *
+ * struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ * ehci->need_io_watchdog = 0;
+ *
+ * here, but since this is a new driver we're going to leave the
+ * watchdog enabled. Later we may try to turn it off and see
+ * whether we run into any problems.
+ */
+
+ return ret;
+}
+
+static const struct hc_driver ehci_tilegx_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Tile-Gx EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * Generic hardware linkage.
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+
+ /*
+ * Basic lifecycle operations.
+ */
+ .reset = tilegx_ehci_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * Managing I/O requests and associated device resources.
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * Scheduling support.
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * Root hub support.
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ pte_t pte = { 0 };
+ int my_cpu = smp_processor_id();
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /*
+ * Try to initialize our GXIO context; if we can't, the device
+ * doesn't exist.
+ */
+ if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0)
+ return -ENXIO;
+
+ hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ ret = -ENOMEM;
+ goto err_hcd;
+ }
+
+ /*
+ * We don't use rsrc_start to map in our registers, but seems like
+ * we ought to set it to something, so we use the register VA.
+ */
+ hcd->rsrc_start =
+ (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx);
+ hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx);
+ hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx);
+
+ tilegx_start_ehc();
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+ ehci->regs =
+ hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ /* Create our IRQs and register them. */
+ pdata->irq = irq_alloc_hwirq(-1);
+ if (!pdata->irq) {
+ ret = -ENXIO;
+ goto err_no_irq;
+ }
+
+ tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU);
+
+ /* Configure interrupts. */
+ ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx,
+ cpu_x(my_cpu), cpu_y(my_cpu),
+ KERNEL_PL, pdata->irq);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_have_irq;
+ }
+
+ /* Register all of our memory. */
+ pte = pte_set_home(pte, PAGE_HOME_HASH);
+ ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_have_irq;
+ }
+
+ ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, hcd);
+ device_wakeup_enable(hcd->self.controller);
+ return ret;
+ }
+
+err_have_irq:
+ irq_free_hwirq(pdata->irq);
+err_no_irq:
+ tilegx_stop_ehc();
+ usb_put_hcd(hcd);
+err_hcd:
+ gxio_usb_host_destroy(&pdata->usb_ctx);
+ return ret;
+}
+
+static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+ tilegx_stop_ehc();
+ gxio_usb_host_destroy(&pdata->usb_ctx);
+ irq_free_hwirq(pdata->irq);
+
+ return 0;
+}
+
+static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev)
+{
+ usb_hcd_platform_shutdown(pdev);
+ ehci_hcd_tilegx_drv_remove(pdev);
+}
+
+static struct platform_driver ehci_hcd_tilegx_driver = {
+ .probe = ehci_hcd_tilegx_drv_probe,
+ .remove = ehci_hcd_tilegx_drv_remove,
+ .shutdown = ehci_hcd_tilegx_drv_shutdown,
+ .driver = {
+ .name = "tilegx-ehci",
+ }
+};
+
+MODULE_ALIAS("platform:tilegx-ehci");
Code Review / kvmfornfv.git / blobdiff