--- /dev/null
+/*
+ * hcd_queue.c - DesignWare HS OTG Controller host queuing routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the functions to manage Queue Heads and Queue
+ * Transfer Descriptors for Host mode
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/**
+ * dwc2_qh_init() - Initializes a QH structure
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: The QH to init
+ * @urb: Holds the information about the device/endpoint needed to initialize
+ * the QH
+ */
+#define SCHEDULE_SLOP 10
+static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ struct dwc2_hcd_urb *urb)
+{
+ int dev_speed, hub_addr, hub_port;
+ char *speed, *type;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Initialize QH */
+ qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+ qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
+
+ qh->data_toggle = DWC2_HC_PID_DATA0;
+ qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
+ INIT_LIST_HEAD(&qh->qtd_list);
+ INIT_LIST_HEAD(&qh->qh_list_entry);
+
+ /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
+ dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+
+ dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+
+ if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
+ hub_addr != 0 && hub_addr != 1) {
+ dev_vdbg(hsotg->dev,
+ "QH init: EP %d: TT found at hub addr %d, for port %d\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
+ hub_port);
+ qh->do_split = 1;
+ }
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /* Compute scheduling parameters once and save them */
+ u32 hprt, prtspd;
+
+ /* Todo: Account for split transfers in the bus time */
+ int bytecount =
+ dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+
+ qh->usecs = NS_TO_US(usb_calc_bus_time(qh->do_split ?
+ USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC,
+ bytecount));
+ /* Start in a slightly future (micro)frame */
+ qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
+ SCHEDULE_SLOP);
+ qh->interval = urb->interval;
+#if 0
+ /* Increase interrupt polling rate for debugging */
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT)
+ qh->interval = 8;
+#endif
+ hprt = readl(hsotg->regs + HPRT0);
+ prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+ if (prtspd == HPRT0_SPD_HIGH_SPEED &&
+ (dev_speed == USB_SPEED_LOW ||
+ dev_speed == USB_SPEED_FULL)) {
+ qh->interval *= 8;
+ qh->sched_frame |= 0x7;
+ qh->start_split_frame = qh->sched_frame;
+ }
+ dev_dbg(hsotg->dev, "interval=%d\n", qh->interval);
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
+ dwc2_hcd_get_dev_addr(&urb->pipe_info));
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+
+ qh->dev_speed = dev_speed;
+
+ switch (dev_speed) {
+ case USB_SPEED_LOW:
+ speed = "low";
+ break;
+ case USB_SPEED_FULL:
+ speed = "full";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "high";
+ break;
+ default:
+ speed = "?";
+ break;
+ }
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
+
+ switch (qh->ep_type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ type = "isochronous";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ type = "interrupt";
+ break;
+ case USB_ENDPOINT_XFER_CONTROL:
+ type = "control";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ type = "bulk";
+ break;
+ default:
+ type = "?";
+ break;
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
+ qh->usecs);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
+ qh->interval);
+ }
+}
+
+/**
+ * dwc2_hcd_qh_create() - Allocates and initializes a QH
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @urb: Holds the information about the device/endpoint needed
+ * to initialize the QH
+ * @atomic_alloc: Flag to do atomic allocation if needed
+ *
+ * Return: Pointer to the newly allocated QH, or NULL on error
+ */
+static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb,
+ gfp_t mem_flags)
+{
+ struct dwc2_qh *qh;
+
+ if (!urb->priv)
+ return NULL;
+
+ /* Allocate memory */
+ qh = kzalloc(sizeof(*qh), mem_flags);
+ if (!qh)
+ return NULL;
+
+ dwc2_qh_init(hsotg, qh, urb);
+
+ if (hsotg->core_params->dma_desc_enable > 0 &&
+ dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
+ dwc2_hcd_qh_free(hsotg, qh);
+ return NULL;
+ }
+
+ return qh;
+}
+
+/**
+ * dwc2_hcd_qh_free() - Frees the QH
+ *
+ * @hsotg: HCD instance
+ * @qh: The QH to free
+ *
+ * QH should already be removed from the list. QTD list should already be empty
+ * if called from URB Dequeue.
+ *
+ * Must NOT be called with interrupt disabled or spinlock held
+ */
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ if (hsotg->core_params->dma_desc_enable > 0)
+ dwc2_hcd_qh_free_ddma(hsotg, qh);
+ else if (qh->dw_align_buf)
+ dma_free_coherent(hsotg->dev, qh->dw_align_buf_size,
+ qh->dw_align_buf, qh->dw_align_buf_dma);
+ kfree(qh);
+}
+
+/**
+ * dwc2_periodic_channel_available() - Checks that a channel is available for a
+ * periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg)
+{
+ /*
+ * Currently assuming that there is a dedicated host channel for
+ * each periodic transaction plus at least one host channel for
+ * non-periodic transactions
+ */
+ int status;
+ int num_channels;
+
+ num_channels = hsotg->core_params->host_channels;
+ if (hsotg->periodic_channels + hsotg->non_periodic_channels <
+ num_channels
+ && hsotg->periodic_channels < num_channels - 1) {
+ status = 0;
+ } else {
+ dev_dbg(hsotg->dev,
+ "%s: Total channels: %d, Periodic: %d, "
+ "Non-periodic: %d\n", __func__, num_channels,
+ hsotg->periodic_channels, hsotg->non_periodic_channels);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth
+ * for the specified QH in the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH containing periodic bandwidth required
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * For simplicity, this calculation assumes that all the transfers in the
+ * periodic schedule may occur in the same (micro)frame
+ */
+static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ int status;
+ s16 max_claimed_usecs;
+
+ status = 0;
+
+ if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) {
+ /*
+ * High speed mode
+ * Max periodic usecs is 80% x 125 usec = 100 usec
+ */
+ max_claimed_usecs = 100 - qh->usecs;
+ } else {
+ /*
+ * Full speed mode
+ * Max periodic usecs is 90% x 1000 usec = 900 usec
+ */
+ max_claimed_usecs = 900 - qh->usecs;
+ }
+
+ if (hsotg->periodic_usecs > max_claimed_usecs) {
+ dev_err(hsotg->dev,
+ "%s: already claimed usecs %d, required usecs %d\n",
+ __func__, hsotg->periodic_usecs, qh->usecs);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * Microframe scheduler
+ * track the total use in hsotg->frame_usecs
+ * keep each qh use in qh->frame_usecs
+ * when surrendering the qh then donate the time back
+ */
+static const unsigned short max_uframe_usecs[] = {
+ 100, 100, 100, 100, 100, 100, 30, 0
+};
+
+void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ hsotg->frame_usecs[i] = max_uframe_usecs[i];
+}
+
+static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ unsigned short utime = qh->usecs;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ /* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */
+ if (utime <= hsotg->frame_usecs[i]) {
+ hsotg->frame_usecs[i] -= utime;
+ qh->frame_usecs[i] += utime;
+ return i;
+ }
+ }
+ return -ENOSPC;
+}
+
+/*
+ * use this for FS apps that can span multiple uframes
+ */
+static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ unsigned short utime = qh->usecs;
+ unsigned short xtime;
+ int t_left;
+ int i;
+ int j;
+ int k;
+
+ for (i = 0; i < 8; i++) {
+ if (hsotg->frame_usecs[i] <= 0)
+ continue;
+
+ /*
+ * we need n consecutive slots so use j as a start slot
+ * j plus j+1 must be enough time (for now)
+ */
+ xtime = hsotg->frame_usecs[i];
+ for (j = i + 1; j < 8; j++) {
+ /*
+ * if we add this frame remaining time to xtime we may
+ * be OK, if not we need to test j for a complete frame
+ */
+ if (xtime + hsotg->frame_usecs[j] < utime) {
+ if (hsotg->frame_usecs[j] <
+ max_uframe_usecs[j])
+ continue;
+ }
+ if (xtime >= utime) {
+ t_left = utime;
+ for (k = i; k < 8; k++) {
+ t_left -= hsotg->frame_usecs[k];
+ if (t_left <= 0) {
+ qh->frame_usecs[k] +=
+ hsotg->frame_usecs[k]
+ + t_left;
+ hsotg->frame_usecs[k] = -t_left;
+ return i;
+ } else {
+ qh->frame_usecs[k] +=
+ hsotg->frame_usecs[k];
+ hsotg->frame_usecs[k] = 0;
+ }
+ }
+ }
+ /* add the frame time to x time */
+ xtime += hsotg->frame_usecs[j];
+ /* we must have a fully available next frame or break */
+ if (xtime < utime &&
+ hsotg->frame_usecs[j] == max_uframe_usecs[j])
+ continue;
+ }
+ }
+ return -ENOSPC;
+}
+
+static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int ret;
+
+ if (qh->dev_speed == USB_SPEED_HIGH) {
+ /* if this is a hs transaction we need a full frame */
+ ret = dwc2_find_single_uframe(hsotg, qh);
+ } else {
+ /*
+ * if this is a fs transaction we may need a sequence
+ * of frames
+ */
+ ret = dwc2_find_multi_uframe(hsotg, qh);
+ }
+ return ret;
+}
+
+/**
+ * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a
+ * host channel is large enough to handle the maximum data transfer in a single
+ * (micro)frame for a periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for a periodic endpoint
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ u32 max_xfer_size;
+ u32 max_channel_xfer_size;
+ int status = 0;
+
+ max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
+ max_channel_xfer_size = hsotg->core_params->max_transfer_size;
+
+ if (max_xfer_size > max_channel_xfer_size) {
+ dev_err(hsotg->dev,
+ "%s: Periodic xfer length %d > max xfer length for channel %d\n",
+ __func__, max_xfer_size, max_channel_xfer_size);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in
+ * the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer. The QH should already contain the
+ * scheduling information.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int status;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ int frame = -1;
+
+ status = dwc2_find_uframe(hsotg, qh);
+ if (status == 0)
+ frame = 7;
+ else if (status > 0)
+ frame = status - 1;
+
+ /* Set the new frame up */
+ if (frame >= 0) {
+ qh->sched_frame &= ~0x7;
+ qh->sched_frame |= (frame & 7);
+ }
+
+ if (status > 0)
+ status = 0;
+ } else {
+ status = dwc2_periodic_channel_available(hsotg);
+ if (status) {
+ dev_info(hsotg->dev,
+ "%s: No host channel available for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_periodic_bandwidth(hsotg, qh);
+ }
+
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: Insufficient periodic bandwidth for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_max_xfer_size(hsotg, qh);
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: Channel max transfer size too small for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ if (hsotg->core_params->dma_desc_enable > 0)
+ /* Don't rely on SOF and start in ready schedule */
+ list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready);
+ else
+ /* Always start in inactive schedule */
+ list_add_tail(&qh->qh_list_entry,
+ &hsotg->periodic_sched_inactive);
+
+ if (hsotg->core_params->uframe_sched <= 0)
+ /* Reserve periodic channel */
+ hsotg->periodic_channels++;
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs += qh->usecs;
+
+ return status;
+}
+
+/**
+ * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer
+ * from the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer
+ */
+static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ int i;
+
+ list_del_init(&qh->qh_list_entry);
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs -= qh->usecs;
+
+ if (hsotg->core_params->uframe_sched > 0) {
+ for (i = 0; i < 8; i++) {
+ hsotg->frame_usecs[i] += qh->frame_usecs[i];
+ qh->frame_usecs[i] = 0;
+ }
+ } else {
+ /* Release periodic channel reservation */
+ hsotg->periodic_channels--;
+ }
+}
+
+/**
+ * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic
+ * schedule if it is not already in the schedule. If the QH is already in
+ * the schedule, no action is taken.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: The QH to add
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int status;
+ u32 intr_mask;
+
+ if (dbg_qh(qh))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (!list_empty(&qh->qh_list_entry))
+ /* QH already in a schedule */
+ return 0;
+
+ /* Add the new QH to the appropriate schedule */
+ if (dwc2_qh_is_non_per(qh)) {
+ /* Always start in inactive schedule */
+ list_add_tail(&qh->qh_list_entry,
+ &hsotg->non_periodic_sched_inactive);
+ return 0;
+ }
+
+ status = dwc2_schedule_periodic(hsotg, qh);
+ if (status)
+ return status;
+ if (!hsotg->periodic_qh_count) {
+ intr_mask = readl(hsotg->regs + GINTMSK);
+ intr_mask |= GINTSTS_SOF;
+ writel(intr_mask, hsotg->regs + GINTMSK);
+ }
+ hsotg->periodic_qh_count++;
+
+ return 0;
+}
+
+/**
+ * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic
+ * schedule. Memory is not freed.
+ *
+ * @hsotg: The HCD state structure
+ * @qh: QH to remove from schedule
+ */
+void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ u32 intr_mask;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (list_empty(&qh->qh_list_entry))
+ /* QH is not in a schedule */
+ return;
+
+ if (dwc2_qh_is_non_per(qh)) {
+ if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry)
+ hsotg->non_periodic_qh_ptr =
+ hsotg->non_periodic_qh_ptr->next;
+ list_del_init(&qh->qh_list_entry);
+ return;
+ }
+
+ dwc2_deschedule_periodic(hsotg, qh);
+ hsotg->periodic_qh_count--;
+ if (!hsotg->periodic_qh_count) {
+ intr_mask = readl(hsotg->regs + GINTMSK);
+ intr_mask &= ~GINTSTS_SOF;
+ writel(intr_mask, hsotg->regs + GINTMSK);
+ }
+}
+
+/*
+ * Schedule the next continuing periodic split transfer
+ */
+static void dwc2_sched_periodic_split(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh, u16 frame_number,
+ int sched_next_periodic_split)
+{
+ u16 incr;
+
+ if (sched_next_periodic_split) {
+ qh->sched_frame = frame_number;
+ incr = dwc2_frame_num_inc(qh->start_split_frame, 1);
+ if (dwc2_frame_num_le(frame_number, incr)) {
+ /*
+ * Allow one frame to elapse after start split
+ * microframe before scheduling complete split, but
+ * DON'T if we are doing the next start split in the
+ * same frame for an ISOC out
+ */
+ if (qh->ep_type != USB_ENDPOINT_XFER_ISOC ||
+ qh->ep_is_in != 0) {
+ qh->sched_frame =
+ dwc2_frame_num_inc(qh->sched_frame, 1);
+ }
+ }
+ } else {
+ qh->sched_frame = dwc2_frame_num_inc(qh->start_split_frame,
+ qh->interval);
+ if (dwc2_frame_num_le(qh->sched_frame, frame_number))
+ qh->sched_frame = frame_number;
+ qh->sched_frame |= 0x7;
+ qh->start_split_frame = qh->sched_frame;
+ }
+}
+
+/*
+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
+ * non-periodic schedule. The QH is added to the inactive non-periodic
+ * schedule if any QTDs are still attached to the QH.
+ *
+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
+ * there are any QTDs still attached to the QH, the QH is added to either the
+ * periodic inactive schedule or the periodic ready schedule and its next
+ * scheduled frame is calculated. The QH is placed in the ready schedule if
+ * the scheduled frame has been reached already. Otherwise it's placed in the
+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
+ * completely removed from the periodic schedule.
+ */
+void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ int sched_next_periodic_split)
+{
+ u16 frame_number;
+
+ if (dbg_qh(qh))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (dwc2_qh_is_non_per(qh)) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+ if (!list_empty(&qh->qtd_list))
+ /* Add back to inactive non-periodic schedule */
+ dwc2_hcd_qh_add(hsotg, qh);
+ return;
+ }
+
+ frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+ if (qh->do_split) {
+ dwc2_sched_periodic_split(hsotg, qh, frame_number,
+ sched_next_periodic_split);
+ } else {
+ qh->sched_frame = dwc2_frame_num_inc(qh->sched_frame,
+ qh->interval);
+ if (dwc2_frame_num_le(qh->sched_frame, frame_number))
+ qh->sched_frame = frame_number;
+ }
+
+ if (list_empty(&qh->qtd_list)) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+ return;
+ }
+ /*
+ * Remove from periodic_sched_queued and move to
+ * appropriate queue
+ */
+ if ((hsotg->core_params->uframe_sched > 0 &&
+ dwc2_frame_num_le(qh->sched_frame, frame_number)) ||
+ (hsotg->core_params->uframe_sched <= 0 &&
+ qh->sched_frame == frame_number))
+ list_move(&qh->qh_list_entry, &hsotg->periodic_sched_ready);
+ else
+ list_move(&qh->qh_list_entry, &hsotg->periodic_sched_inactive);
+}
+
+/**
+ * dwc2_hcd_qtd_init() - Initializes a QTD structure
+ *
+ * @qtd: The QTD to initialize
+ * @urb: The associated URB
+ */
+void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+ qtd->urb = urb;
+ if (dwc2_hcd_get_pipe_type(&urb->pipe_info) ==
+ USB_ENDPOINT_XFER_CONTROL) {
+ /*
+ * The only time the QTD data toggle is used is on the data
+ * phase of control transfers. This phase always starts with
+ * DATA1.
+ */
+ qtd->data_toggle = DWC2_HC_PID_DATA1;
+ qtd->control_phase = DWC2_CONTROL_SETUP;
+ }
+
+ /* Start split */
+ qtd->complete_split = 0;
+ qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
+ qtd->isoc_split_offset = 0;
+ qtd->in_process = 0;
+
+ /* Store the qtd ptr in the urb to reference the QTD */
+ urb->qtd = qtd;
+}
+
+/**
+ * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH
+ *
+ * @hsotg: The DWC HCD structure
+ * @qtd: The QTD to add
+ * @qh: Out parameter to return queue head
+ * @atomic_alloc: Flag to do atomic alloc if needed
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * Finds the correct QH to place the QTD into. If it does not find a QH, it
+ * will create a new QH. If the QH to which the QTD is added is not currently
+ * scheduled, it is placed into the proper schedule based on its EP type.
+ */
+int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+ struct dwc2_qh **qh, gfp_t mem_flags)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ unsigned long flags;
+ int allocated = 0;
+ int retval;
+
+ /*
+ * Get the QH which holds the QTD-list to insert to. Create QH if it
+ * doesn't exist.
+ */
+ if (*qh == NULL) {
+ *qh = dwc2_hcd_qh_create(hsotg, urb, mem_flags);
+ if (*qh == NULL)
+ return -ENOMEM;
+ allocated = 1;
+ }
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ retval = dwc2_hcd_qh_add(hsotg, *qh);
+ if (retval)
+ goto fail;
+
+ qtd->qh = *qh;
+ list_add_tail(&qtd->qtd_list_entry, &(*qh)->qtd_list);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return 0;
+
+fail:
+ if (allocated) {
+ struct dwc2_qtd *qtd2, *qtd2_tmp;
+ struct dwc2_qh *qh_tmp = *qh;
+
+ *qh = NULL;
+ dwc2_hcd_qh_unlink(hsotg, qh_tmp);
+
+ /* Free each QTD in the QH's QTD list */
+ list_for_each_entry_safe(qtd2, qtd2_tmp, &qh_tmp->qtd_list,
+ qtd_list_entry)
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh_tmp);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ dwc2_hcd_qh_free(hsotg, qh_tmp);
+ } else {
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+
+ return retval;
+}
Code Review / kvmfornfv.git / blobdiff