--- /dev/null
+/*
+ * core.c - DesignWare HS OTG Controller common routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * The Core code provides basic services for accessing and managing the
+ * DWC_otg hardware. These services are used by both the Host Controller
+ * Driver and the Peripheral Controller Driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/**
+ * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * used in both device and host modes
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk;
+
+ /* Clear any pending OTG Interrupts */
+ writel(0xffffffff, hsotg->regs + GOTGINT);
+
+ /* Clear any pending interrupts */
+ writel(0xffffffff, hsotg->regs + GINTSTS);
+
+ /* Enable the interrupts in the GINTMSK */
+ intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
+
+ if (hsotg->core_params->dma_enable <= 0)
+ intmsk |= GINTSTS_RXFLVL;
+
+ intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP |
+ GINTSTS_SESSREQINT;
+
+ writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
+{
+ u32 hcfg, val;
+
+ if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->core_params->ulpi_fs_ls > 0) ||
+ hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* Full speed PHY */
+ val = HCFG_FSLSPCLKSEL_48_MHZ;
+ } else {
+ /* High speed PHY running at full speed or high speed */
+ val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+ }
+
+ dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+ hcfg = readl(hsotg->regs + HCFG);
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+ writel(hcfg, hsotg->regs + HCFG);
+}
+
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
+ */
+static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
+{
+ u32 greset;
+ int count = 0;
+ u32 gusbcfg;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Wait for AHB master IDLE state */
+ do {
+ usleep_range(20000, 40000);
+ greset = readl(hsotg->regs + GRSTCTL);
+ if (++count > 50) {
+ dev_warn(hsotg->dev,
+ "%s() HANG! AHB Idle GRSTCTL=%0x\n",
+ __func__, greset);
+ return -EBUSY;
+ }
+ } while (!(greset & GRSTCTL_AHBIDLE));
+
+ /* Core Soft Reset */
+ count = 0;
+ greset |= GRSTCTL_CSFTRST;
+ writel(greset, hsotg->regs + GRSTCTL);
+ do {
+ usleep_range(20000, 40000);
+ greset = readl(hsotg->regs + GRSTCTL);
+ if (++count > 50) {
+ dev_warn(hsotg->dev,
+ "%s() HANG! Soft Reset GRSTCTL=%0x\n",
+ __func__, greset);
+ return -EBUSY;
+ }
+ } while (greset & GRSTCTL_CSFTRST);
+
+ if (hsotg->dr_mode == USB_DR_MODE_HOST) {
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+ gusbcfg |= GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ gusbcfg |= GUSBCFG_FORCEDEVMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ } else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ }
+
+ /*
+ * NOTE: This long sleep is _very_ important, otherwise the core will
+ * not stay in host mode after a connector ID change!
+ */
+ usleep_range(150000, 200000);
+
+ return 0;
+}
+
+static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg, i2cctl;
+ int retval = 0;
+
+ /*
+ * core_init() is now called on every switch so only call the
+ * following for the first time through
+ */
+ if (select_phy) {
+ dev_dbg(hsotg->dev, "FS PHY selected\n");
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ usbcfg |= GUSBCFG_PHYSEL;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Reset after a PHY select */
+ retval = dwc2_core_reset(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev, "%s() Reset failed, aborting",
+ __func__);
+ return retval;
+ }
+ }
+
+ /*
+ * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
+ * do this on HNP Dev/Host mode switches (done in dev_init and
+ * host_init).
+ */
+ if (dwc2_is_host_mode(hsotg))
+ dwc2_init_fs_ls_pclk_sel(hsotg);
+
+ if (hsotg->core_params->i2c_enable > 0) {
+ dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
+
+ /* Program GUSBCFG.OtgUtmiFsSel to I2C */
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Program GI2CCTL.I2CEn */
+ i2cctl = readl(hsotg->regs + GI2CCTL);
+ i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+ i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+ i2cctl &= ~GI2CCTL_I2CEN;
+ writel(i2cctl, hsotg->regs + GI2CCTL);
+ i2cctl |= GI2CCTL_I2CEN;
+ writel(i2cctl, hsotg->regs + GI2CCTL);
+ }
+
+ return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg;
+ int retval = 0;
+
+ if (!select_phy)
+ return 0;
+
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+
+ /*
+ * HS PHY parameters. These parameters are preserved during soft reset
+ * so only program the first time. Do a soft reset immediately after
+ * setting phyif.
+ */
+ switch (hsotg->core_params->phy_type) {
+ case DWC2_PHY_TYPE_PARAM_ULPI:
+ /* ULPI interface */
+ dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
+ usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+ usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
+ if (hsotg->core_params->phy_ulpi_ddr > 0)
+ usbcfg |= GUSBCFG_DDRSEL;
+ break;
+ case DWC2_PHY_TYPE_PARAM_UTMI:
+ /* UTMI+ interface */
+ dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
+ usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+ if (hsotg->core_params->phy_utmi_width == 16)
+ usbcfg |= GUSBCFG_PHYIF16;
+ break;
+ default:
+ dev_err(hsotg->dev, "FS PHY selected at HS!\n");
+ break;
+ }
+
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Reset after setting the PHY parameters */
+ retval = dwc2_core_reset(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev, "%s() Reset failed, aborting",
+ __func__);
+ return retval;
+ }
+
+ return retval;
+}
+
+static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg;
+ int retval = 0;
+
+ if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL &&
+ hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* If FS mode with FS PHY */
+ retval = dwc2_fs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ } else {
+ /* High speed PHY */
+ retval = dwc2_hs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ }
+
+ if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->core_params->ulpi_fs_ls > 0) {
+ dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ usbcfg |= GUSBCFG_ULPI_FS_LS;
+ usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+ } else {
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+ usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+ }
+
+ return retval;
+}
+
+static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
+{
+ u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
+
+ switch (hsotg->hw_params.arch) {
+ case GHWCFG2_EXT_DMA_ARCH:
+ dev_err(hsotg->dev, "External DMA Mode not supported\n");
+ return -EINVAL;
+
+ case GHWCFG2_INT_DMA_ARCH:
+ dev_dbg(hsotg->dev, "Internal DMA Mode\n");
+ if (hsotg->core_params->ahbcfg != -1) {
+ ahbcfg &= GAHBCFG_CTRL_MASK;
+ ahbcfg |= hsotg->core_params->ahbcfg &
+ ~GAHBCFG_CTRL_MASK;
+ }
+ break;
+
+ case GHWCFG2_SLAVE_ONLY_ARCH:
+ default:
+ dev_dbg(hsotg->dev, "Slave Only Mode\n");
+ break;
+ }
+
+ dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n",
+ hsotg->core_params->dma_enable,
+ hsotg->core_params->dma_desc_enable);
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (hsotg->core_params->dma_desc_enable > 0)
+ dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n");
+ else
+ dev_dbg(hsotg->dev, "Using Buffer DMA mode\n");
+ } else {
+ dev_dbg(hsotg->dev, "Using Slave mode\n");
+ hsotg->core_params->dma_desc_enable = 0;
+ }
+
+ if (hsotg->core_params->dma_enable > 0)
+ ahbcfg |= GAHBCFG_DMA_EN;
+
+ writel(ahbcfg, hsotg->regs + GAHBCFG);
+
+ return 0;
+}
+
+static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
+{
+ u32 usbcfg;
+
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
+
+ switch (hsotg->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ if (hsotg->core_params->otg_cap ==
+ DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_HNPCAP;
+ if (hsotg->core_params->otg_cap !=
+ DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_SRPCAP;
+ break;
+
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ if (hsotg->core_params->otg_cap !=
+ DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_SRPCAP;
+ break;
+
+ case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
+ default:
+ break;
+ }
+
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+}
+
+/**
+ * dwc2_core_init() - Initializes the DWC_otg controller registers and
+ * prepares the core for device mode or host mode operation
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @select_phy: If true then also set the Phy type
+ * @irq: If >= 0, the irq to register
+ */
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq)
+{
+ u32 usbcfg, otgctl;
+ int retval;
+
+ dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+
+ /* Set ULPI External VBUS bit if needed */
+ usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
+ if (hsotg->core_params->phy_ulpi_ext_vbus ==
+ DWC2_PHY_ULPI_EXTERNAL_VBUS)
+ usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
+
+ /* Set external TS Dline pulsing bit if needed */
+ usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
+ if (hsotg->core_params->ts_dline > 0)
+ usbcfg |= GUSBCFG_TERMSELDLPULSE;
+
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Reset the Controller */
+ retval = dwc2_core_reset(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+ __func__);
+ return retval;
+ }
+
+ /*
+ * This needs to happen in FS mode before any other programming occurs
+ */
+ retval = dwc2_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+
+ /* Program the GAHBCFG Register */
+ retval = dwc2_gahbcfg_init(hsotg);
+ if (retval)
+ return retval;
+
+ /* Program the GUSBCFG register */
+ dwc2_gusbcfg_init(hsotg);
+
+ /* Program the GOTGCTL register */
+ otgctl = readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_OTGVER;
+ if (hsotg->core_params->otg_ver > 0)
+ otgctl |= GOTGCTL_OTGVER;
+ writel(otgctl, hsotg->regs + GOTGCTL);
+ dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
+
+ /* Clear the SRP success bit for FS-I2c */
+ hsotg->srp_success = 0;
+
+ /* Enable common interrupts */
+ dwc2_enable_common_interrupts(hsotg);
+
+ /*
+ * Do device or host initialization based on mode during PCD and
+ * HCD initialization
+ */
+ if (dwc2_is_host_mode(hsotg)) {
+ dev_dbg(hsotg->dev, "Host Mode\n");
+ hsotg->op_state = OTG_STATE_A_HOST;
+ } else {
+ dev_dbg(hsotg->dev, "Device Mode\n");
+ hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+ }
+
+ return 0;
+}
+
+/**
+ * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk;
+
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Disable all interrupts */
+ writel(0, hsotg->regs + GINTMSK);
+ writel(0, hsotg->regs + HAINTMSK);
+
+ /* Enable the common interrupts */
+ dwc2_enable_common_interrupts(hsotg);
+
+ /* Enable host mode interrupts without disturbing common interrupts */
+ intmsk = readl(hsotg->regs + GINTMSK);
+ intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
+ writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/**
+ * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk = readl(hsotg->regs + GINTMSK);
+
+ /* Disable host mode interrupts without disturbing common interrupts */
+ intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
+ GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP);
+ writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/*
+ * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
+ * For system that have a total fifo depth that is smaller than the default
+ * RX + TX fifo size.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *params = hsotg->core_params;
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
+
+ total_fifo_size = hw->total_fifo_size;
+ rxfsiz = params->host_rx_fifo_size;
+ nptxfsiz = params->host_nperio_tx_fifo_size;
+ ptxfsiz = params->host_perio_tx_fifo_size;
+
+ /*
+ * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
+ * allocation with support for high bandwidth endpoints. Synopsys
+ * defines MPS(Max Packet size) for a periodic EP=1024, and for
+ * non-periodic as 512.
+ */
+ if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
+ /*
+ * For Buffer DMA mode/Scatter Gather DMA mode
+ * 2 * ((Largest Packet size / 4) + 1 + 1) + n
+ * with n = number of host channel.
+ * 2 * ((1024/4) + 2) = 516
+ */
+ rxfsiz = 516 + hw->host_channels;
+
+ /*
+ * min non-periodic tx fifo depth
+ * 2 * (largest non-periodic USB packet used / 4)
+ * 2 * (512/4) = 256
+ */
+ nptxfsiz = 256;
+
+ /*
+ * min periodic tx fifo depth
+ * (largest packet size*MC)/4
+ * (1024 * 3)/4 = 768
+ */
+ ptxfsiz = 768;
+
+ params->host_rx_fifo_size = rxfsiz;
+ params->host_nperio_tx_fifo_size = nptxfsiz;
+ params->host_perio_tx_fifo_size = ptxfsiz;
+ }
+
+ /*
+ * If the summation of RX, NPTX and PTX fifo sizes is still
+ * bigger than the total_fifo_size, then we have a problem.
+ *
+ * We won't be able to allocate as many endpoints. Right now,
+ * we're just printing an error message, but ideally this FIFO
+ * allocation algorithm would be improved in the future.
+ *
+ * FIXME improve this FIFO allocation algorithm.
+ */
+ if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
+ dev_err(hsotg->dev, "invalid fifo sizes\n");
+}
+
+static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *params = hsotg->core_params;
+ u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
+
+ if (!params->enable_dynamic_fifo)
+ return;
+
+ dwc2_calculate_dynamic_fifo(hsotg);
+
+ /* Rx FIFO */
+ grxfsiz = readl(hsotg->regs + GRXFSIZ);
+ dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
+ grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
+ grxfsiz |= params->host_rx_fifo_size <<
+ GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
+ writel(grxfsiz, hsotg->regs + GRXFSIZ);
+ dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ));
+
+ /* Non-periodic Tx FIFO */
+ dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
+ readl(hsotg->regs + GNPTXFSIZ));
+ nptxfsiz = params->host_nperio_tx_fifo_size <<
+ FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+ nptxfsiz |= params->host_rx_fifo_size <<
+ FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+ writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
+ dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
+ readl(hsotg->regs + GNPTXFSIZ));
+
+ /* Periodic Tx FIFO */
+ dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
+ readl(hsotg->regs + HPTXFSIZ));
+ hptxfsiz = params->host_perio_tx_fifo_size <<
+ FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+ hptxfsiz |= (params->host_rx_fifo_size +
+ params->host_nperio_tx_fifo_size) <<
+ FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+ writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
+ readl(hsotg->regs + HPTXFSIZ));
+
+ if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
+ hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
+ /*
+ * Global DFIFOCFG calculation for Host mode -
+ * include RxFIFO, NPTXFIFO and HPTXFIFO
+ */
+ dfifocfg = readl(hsotg->regs + GDFIFOCFG);
+ dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
+ dfifocfg |= (params->host_rx_fifo_size +
+ params->host_nperio_tx_fifo_size +
+ params->host_perio_tx_fifo_size) <<
+ GDFIFOCFG_EPINFOBASE_SHIFT &
+ GDFIFOCFG_EPINFOBASE_MASK;
+ writel(dfifocfg, hsotg->regs + GDFIFOCFG);
+ }
+}
+
+/**
+ * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
+ * Host mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This function flushes the Tx and Rx FIFOs and flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ */
+void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
+{
+ u32 hcfg, hfir, otgctl;
+
+ dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+ /* Restart the Phy Clock */
+ writel(0, hsotg->regs + PCGCTL);
+
+ /* Initialize Host Configuration Register */
+ dwc2_init_fs_ls_pclk_sel(hsotg);
+ if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
+ hcfg = readl(hsotg->regs + HCFG);
+ hcfg |= HCFG_FSLSSUPP;
+ writel(hcfg, hsotg->regs + HCFG);
+ }
+
+ /*
+ * This bit allows dynamic reloading of the HFIR register during
+ * runtime. This bit needs to be programmed during initial configuration
+ * and its value must not be changed during runtime.
+ */
+ if (hsotg->core_params->reload_ctl > 0) {
+ hfir = readl(hsotg->regs + HFIR);
+ hfir |= HFIR_RLDCTRL;
+ writel(hfir, hsotg->regs + HFIR);
+ }
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ u32 op_mode = hsotg->hw_params.op_mode;
+ if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
+ !hsotg->hw_params.dma_desc_enable ||
+ op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
+ dev_err(hsotg->dev,
+ "Hardware does not support descriptor DMA mode -\n");
+ dev_err(hsotg->dev,
+ "falling back to buffer DMA mode.\n");
+ hsotg->core_params->dma_desc_enable = 0;
+ } else {
+ hcfg = readl(hsotg->regs + HCFG);
+ hcfg |= HCFG_DESCDMA;
+ writel(hcfg, hsotg->regs + HCFG);
+ }
+ }
+
+ /* Configure data FIFO sizes */
+ dwc2_config_fifos(hsotg);
+
+ /* TODO - check this */
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ otgctl = readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_HSTSETHNPEN;
+ writel(otgctl, hsotg->regs + GOTGCTL);
+
+ /* Make sure the FIFOs are flushed */
+ dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
+ dwc2_flush_rx_fifo(hsotg);
+
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ otgctl = readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_HSTSETHNPEN;
+ writel(otgctl, hsotg->regs + GOTGCTL);
+
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ int num_channels, i;
+ u32 hcchar;
+
+ /* Flush out any leftover queued requests */
+ num_channels = hsotg->core_params->host_channels;
+ for (i = 0; i < num_channels; i++) {
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ hcchar &= ~HCCHAR_CHENA;
+ hcchar |= HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ writel(hcchar, hsotg->regs + HCCHAR(i));
+ }
+
+ /* Halt all channels to put them into a known state */
+ for (i = 0; i < num_channels; i++) {
+ int count = 0;
+
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ writel(hcchar, hsotg->regs + HCCHAR(i));
+ dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
+ __func__, i);
+ do {
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ if (++count > 1000) {
+ dev_err(hsotg->dev,
+ "Unable to clear enable on channel %d\n",
+ i);
+ break;
+ }
+ udelay(1);
+ } while (hcchar & HCCHAR_CHENA);
+ }
+ }
+
+ /* Turn on the vbus power */
+ dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
+ if (hsotg->op_state == OTG_STATE_A_HOST) {
+ u32 hprt0 = dwc2_read_hprt0(hsotg);
+
+ dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
+ !!(hprt0 & HPRT0_PWR));
+ if (!(hprt0 & HPRT0_PWR)) {
+ hprt0 |= HPRT0_PWR;
+ writel(hprt0, hsotg->regs + HPRT0);
+ }
+ }
+
+ dwc2_enable_host_interrupts(hsotg);
+}
+
+static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ switch (chan->ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ dev_vdbg(hsotg->dev, "control/bulk\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_STALL;
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_BBLERR;
+ } else {
+ hcintmsk |= HCINTMSK_NAK;
+ hcintmsk |= HCINTMSK_NYET;
+ if (chan->do_ping)
+ hcintmsk |= HCINTMSK_ACK;
+ }
+
+ if (chan->do_split) {
+ hcintmsk |= HCINTMSK_NAK;
+ if (chan->complete_split)
+ hcintmsk |= HCINTMSK_NYET;
+ else
+ hcintmsk |= HCINTMSK_ACK;
+ }
+
+ if (chan->error_state)
+ hcintmsk |= HCINTMSK_ACK;
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "intr\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_NAK;
+ hcintmsk |= HCINTMSK_STALL;
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ hcintmsk |= HCINTMSK_FRMOVRUN;
+
+ if (chan->ep_is_in)
+ hcintmsk |= HCINTMSK_BBLERR;
+ if (chan->error_state)
+ hcintmsk |= HCINTMSK_ACK;
+ if (chan->do_split) {
+ if (chan->complete_split)
+ hcintmsk |= HCINTMSK_NYET;
+ else
+ hcintmsk |= HCINTMSK_ACK;
+ }
+ break;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "isoc\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_FRMOVRUN;
+ hcintmsk |= HCINTMSK_ACK;
+
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_BBLERR;
+ }
+ break;
+ default:
+ dev_err(hsotg->dev, "## Unknown EP type ##\n");
+ break;
+ }
+
+ writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ /*
+ * For Descriptor DMA mode core halts the channel on AHB error.
+ * Interrupt is not required.
+ */
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+ hcintmsk |= HCINTMSK_AHBERR;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA enabled\n");
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ }
+
+ if (chan->error_state && !chan->do_split &&
+ chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "setting ACK\n");
+ hcintmsk |= HCINTMSK_ACK;
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ if (chan->ep_type != USB_ENDPOINT_XFER_INT)
+ hcintmsk |= HCINTMSK_NAK;
+ }
+ }
+
+ writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 intmsk;
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA enabled\n");
+ dwc2_hc_enable_dma_ints(hsotg, chan);
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA disabled\n");
+ dwc2_hc_enable_slave_ints(hsotg, chan);
+ }
+
+ /* Enable the top level host channel interrupt */
+ intmsk = readl(hsotg->regs + HAINTMSK);
+ intmsk |= 1 << chan->hc_num;
+ writel(intmsk, hsotg->regs + HAINTMSK);
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
+
+ /* Make sure host channel interrupts are enabled */
+ intmsk = readl(hsotg->regs + GINTMSK);
+ intmsk |= GINTSTS_HCHINT;
+ writel(intmsk, hsotg->regs + GINTMSK);
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
+}
+
+/**
+ * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
+ * a specific endpoint
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * The HCCHARn register is set up with the characteristics specified in chan.
+ * Host channel interrupts that may need to be serviced while this transfer is
+ * in progress are enabled.
+ */
+void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+ u8 hc_num = chan->hc_num;
+ u32 hcintmsk;
+ u32 hcchar;
+ u32 hcsplt = 0;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Clear old interrupt conditions for this host channel */
+ hcintmsk = 0xffffffff;
+ hcintmsk &= ~HCINTMSK_RESERVED14_31;
+ writel(hcintmsk, hsotg->regs + HCINT(hc_num));
+
+ /* Enable channel interrupts required for this transfer */
+ dwc2_hc_enable_ints(hsotg, chan);
+
+ /*
+ * Program the HCCHARn register with the endpoint characteristics for
+ * the current transfer
+ */
+ hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
+ hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
+ if (chan->ep_is_in)
+ hcchar |= HCCHAR_EPDIR;
+ if (chan->speed == USB_SPEED_LOW)
+ hcchar |= HCCHAR_LSPDDEV;
+ hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
+ hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
+ writel(hcchar, hsotg->regs + HCCHAR(hc_num));
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
+ hc_num, hcchar);
+
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n",
+ __func__, hc_num);
+ dev_vdbg(hsotg->dev, " Dev Addr: %d\n",
+ chan->dev_addr);
+ dev_vdbg(hsotg->dev, " Ep Num: %d\n",
+ chan->ep_num);
+ dev_vdbg(hsotg->dev, " Is In: %d\n",
+ chan->ep_is_in);
+ dev_vdbg(hsotg->dev, " Is Low Speed: %d\n",
+ chan->speed == USB_SPEED_LOW);
+ dev_vdbg(hsotg->dev, " Ep Type: %d\n",
+ chan->ep_type);
+ dev_vdbg(hsotg->dev, " Max Pkt: %d\n",
+ chan->max_packet);
+ }
+
+ /* Program the HCSPLT register for SPLITs */
+ if (chan->do_split) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev,
+ "Programming HC %d with split --> %s\n",
+ hc_num,
+ chan->complete_split ? "CSPLIT" : "SSPLIT");
+ if (chan->complete_split)
+ hcsplt |= HCSPLT_COMPSPLT;
+ hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
+ HCSPLT_XACTPOS_MASK;
+ hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
+ HCSPLT_HUBADDR_MASK;
+ hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
+ HCSPLT_PRTADDR_MASK;
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, " comp split %d\n",
+ chan->complete_split);
+ dev_vdbg(hsotg->dev, " xact pos %d\n",
+ chan->xact_pos);
+ dev_vdbg(hsotg->dev, " hub addr %d\n",
+ chan->hub_addr);
+ dev_vdbg(hsotg->dev, " hub port %d\n",
+ chan->hub_port);
+ dev_vdbg(hsotg->dev, " is_in %d\n",
+ chan->ep_is_in);
+ dev_vdbg(hsotg->dev, " Max Pkt %d\n",
+ chan->max_packet);
+ dev_vdbg(hsotg->dev, " xferlen %d\n",
+ chan->xfer_len);
+ }
+ }
+
+ writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
+}
+
+/**
+ * dwc2_hc_halt() - Attempts to halt a host channel
+ *
+ * @hsotg: Controller register interface
+ * @chan: Host channel to halt
+ * @halt_status: Reason for halting the channel
+ *
+ * This function should only be called in Slave mode or to abort a transfer in
+ * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
+ * controller halts the channel when the transfer is complete or a condition
+ * occurs that requires application intervention.
+ *
+ * In slave mode, checks for a free request queue entry, then sets the Channel
+ * Enable and Channel Disable bits of the Host Channel Characteristics
+ * register of the specified channel to intiate the halt. If there is no free
+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
+ * register to flush requests for this channel. In the latter case, sets a
+ * flag to indicate that the host channel needs to be halted when a request
+ * queue slot is open.
+ *
+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
+ * HCCHARn register. The controller ensures there is space in the request
+ * queue before submitting the halt request.
+ *
+ * Some time may elapse before the core flushes any posted requests for this
+ * host channel and halts. The Channel Halted interrupt handler completes the
+ * deactivation of the host channel.
+ */
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+ enum dwc2_halt_status halt_status)
+{
+ u32 nptxsts, hptxsts, hcchar;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+ if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
+ dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
+
+ if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+ halt_status == DWC2_HC_XFER_AHB_ERR) {
+ /*
+ * Disable all channel interrupts except Ch Halted. The QTD
+ * and QH state associated with this transfer has been cleared
+ * (in the case of URB_DEQUEUE), so the channel needs to be
+ * shut down carefully to prevent crashes.
+ */
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ dev_vdbg(hsotg->dev, "dequeue/error\n");
+ writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+
+ /*
+ * Make sure no other interrupts besides halt are currently
+ * pending. Handling another interrupt could cause a crash due
+ * to the QTD and QH state.
+ */
+ writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
+
+ /*
+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
+ * even if the channel was already halted for some other
+ * reason
+ */
+ chan->halt_status = halt_status;
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ if (!(hcchar & HCCHAR_CHENA)) {
+ /*
+ * The channel is either already halted or it hasn't
+ * started yet. In DMA mode, the transfer may halt if
+ * it finishes normally or a condition occurs that
+ * requires driver intervention. Don't want to halt
+ * the channel again. In either Slave or DMA mode,
+ * it's possible that the transfer has been assigned
+ * to a channel, but not started yet when an URB is
+ * dequeued. Don't want to halt a channel that hasn't
+ * started yet.
+ */
+ return;
+ }
+ }
+ if (chan->halt_pending) {
+ /*
+ * A halt has already been issued for this channel. This might
+ * happen when a transfer is aborted by a higher level in
+ * the stack.
+ */
+ dev_vdbg(hsotg->dev,
+ "*** %s: Channel %d, chan->halt_pending already set ***\n",
+ __func__, chan->hc_num);
+ return;
+ }
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+
+ /* No need to set the bit in DDMA for disabling the channel */
+ /* TODO check it everywhere channel is disabled */
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+ hcchar |= HCCHAR_CHENA;
+ } else {
+ if (dbg_hc(chan))
+ dev_dbg(hsotg->dev, "desc DMA enabled\n");
+ }
+ hcchar |= HCCHAR_CHDIS;
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA not enabled\n");
+ hcchar |= HCCHAR_CHENA;
+
+ /* Check for space in the request queue to issue the halt */
+ if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+ chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+ dev_vdbg(hsotg->dev, "control/bulk\n");
+ nptxsts = readl(hsotg->regs + GNPTXSTS);
+ if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
+ dev_vdbg(hsotg->dev, "Disabling channel\n");
+ hcchar &= ~HCCHAR_CHENA;
+ }
+ } else {
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "isoc/intr\n");
+ hptxsts = readl(hsotg->regs + HPTXSTS);
+ if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
+ hsotg->queuing_high_bandwidth) {
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "Disabling channel\n");
+ hcchar &= ~HCCHAR_CHENA;
+ }
+ }
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA enabled\n");
+ }
+
+ writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ chan->halt_status = halt_status;
+
+ if (hcchar & HCCHAR_CHENA) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Channel enabled\n");
+ chan->halt_pending = 1;
+ chan->halt_on_queue = 0;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Channel disabled\n");
+ chan->halt_on_queue = 1;
+ }
+
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n",
+ hcchar);
+ dev_vdbg(hsotg->dev, " halt_pending: %d\n",
+ chan->halt_pending);
+ dev_vdbg(hsotg->dev, " halt_on_queue: %d\n",
+ chan->halt_on_queue);
+ dev_vdbg(hsotg->dev, " halt_status: %d\n",
+ chan->halt_status);
+ }
+}
+
+/**
+ * dwc2_hc_cleanup() - Clears the transfer state for a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Identifies the host channel to clean up
+ *
+ * This function is normally called after a transfer is done and the host
+ * channel is being released
+ */
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk;
+
+ chan->xfer_started = 0;
+
+ /*
+ * Clear channel interrupt enables and any unhandled channel interrupt
+ * conditions
+ */
+ writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
+ hcintmsk = 0xffffffff;
+ hcintmsk &= ~HCINTMSK_RESERVED14_31;
+ writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
+ * which frame a periodic transfer should occur
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Identifies the host channel to set up and its properties
+ * @hcchar: Current value of the HCCHAR register for the specified host channel
+ *
+ * This function has no effect on non-periodic transfers
+ */
+static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, u32 *hcchar)
+{
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /* 1 if _next_ frame is odd, 0 if it's even */
+ if (!(dwc2_hcd_get_frame_number(hsotg) & 0x1))
+ *hcchar |= HCCHAR_ODDFRM;
+ }
+}
+
+static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
+{
+ /* Set up the initial PID for the transfer */
+ if (chan->speed == USB_SPEED_HIGH) {
+ if (chan->ep_is_in) {
+ if (chan->multi_count == 1)
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ else if (chan->multi_count == 2)
+ chan->data_pid_start = DWC2_HC_PID_DATA1;
+ else
+ chan->data_pid_start = DWC2_HC_PID_DATA2;
+ } else {
+ if (chan->multi_count == 1)
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ else
+ chan->data_pid_start = DWC2_HC_PID_MDATA;
+ }
+ } else {
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ }
+}
+
+/**
+ * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
+ * the Host Channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. For a channel associated
+ * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
+ * associated with a periodic EP, the periodic Tx FIFO is written.
+ *
+ * Upon return the xfer_buf and xfer_count fields in chan are incremented by
+ * the number of bytes written to the Tx FIFO.
+ */
+static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 i;
+ u32 remaining_count;
+ u32 byte_count;
+ u32 dword_count;
+ u32 __iomem *data_fifo;
+ u32 *data_buf = (u32 *)chan->xfer_buf;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num));
+
+ remaining_count = chan->xfer_len - chan->xfer_count;
+ if (remaining_count > chan->max_packet)
+ byte_count = chan->max_packet;
+ else
+ byte_count = remaining_count;
+
+ dword_count = (byte_count + 3) / 4;
+
+ if (((unsigned long)data_buf & 0x3) == 0) {
+ /* xfer_buf is DWORD aligned */
+ for (i = 0; i < dword_count; i++, data_buf++)
+ writel(*data_buf, data_fifo);
+ } else {
+ /* xfer_buf is not DWORD aligned */
+ for (i = 0; i < dword_count; i++, data_buf++) {
+ u32 data = data_buf[0] | data_buf[1] << 8 |
+ data_buf[2] << 16 | data_buf[3] << 24;
+ writel(data, data_fifo);
+ }
+ }
+
+ chan->xfer_count += byte_count;
+ chan->xfer_buf += byte_count;
+}
+
+/**
+ * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
+ * channel and starts the transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel. The xfer_len value
+ * may be reduced to accommodate the max widths of the XferSize and
+ * PktCnt fields in the HCTSIZn register. The multi_count value may be
+ * changed to reflect the final xfer_len value.
+ *
+ * This function may be called in either Slave mode or DMA mode. In Slave mode,
+ * the caller must ensure that there is sufficient space in the request queue
+ * and Tx Data FIFO.
+ *
+ * For an OUT transfer in Slave mode, it loads a data packet into the
+ * appropriate FIFO. If necessary, additional data packets are loaded in the
+ * Host ISR.
+ *
+ * For an IN transfer in Slave mode, a data packet is requested. The data
+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
+ * additional data packets are requested in the Host ISR.
+ *
+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
+ * register along with a packet count of 1 and the channel is enabled. This
+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
+ * simply set to 0 since no data transfer occurs in this case.
+ *
+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
+ * all the information required to perform the subsequent data transfer. In
+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
+ * controller performs the entire PING protocol, then starts the data
+ * transfer.
+ */
+void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size;
+ u16 max_hc_pkt_count = hsotg->core_params->max_packet_count;
+ u32 hcchar;
+ u32 hctsiz = 0;
+ u16 num_packets;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (chan->do_ping) {
+ if (hsotg->core_params->dma_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "ping, no DMA\n");
+ dwc2_hc_do_ping(hsotg, chan);
+ chan->xfer_started = 1;
+ return;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "ping, DMA\n");
+ hctsiz |= TSIZ_DOPNG;
+ }
+ }
+
+ if (chan->do_split) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "split\n");
+ num_packets = 1;
+
+ if (chan->complete_split && !chan->ep_is_in)
+ /*
+ * For CSPLIT OUT Transfer, set the size to 0 so the
+ * core doesn't expect any data written to the FIFO
+ */
+ chan->xfer_len = 0;
+ else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
+ chan->xfer_len = chan->max_packet;
+ else if (!chan->ep_is_in && chan->xfer_len > 188)
+ chan->xfer_len = 188;
+
+ hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "no split\n");
+ /*
+ * Ensure that the transfer length and packet count will fit
+ * in the widths allocated for them in the HCTSIZn register
+ */
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /*
+ * Make sure the transfer size is no larger than one
+ * (micro)frame's worth of data. (A check was done
+ * when the periodic transfer was accepted to ensure
+ * that a (micro)frame's worth of data can be
+ * programmed into a channel.)
+ */
+ u32 max_periodic_len =
+ chan->multi_count * chan->max_packet;
+
+ if (chan->xfer_len > max_periodic_len)
+ chan->xfer_len = max_periodic_len;
+ } else if (chan->xfer_len > max_hc_xfer_size) {
+ /*
+ * Make sure that xfer_len is a multiple of max packet
+ * size
+ */
+ chan->xfer_len =
+ max_hc_xfer_size - chan->max_packet + 1;
+ }
+
+ if (chan->xfer_len > 0) {
+ num_packets = (chan->xfer_len + chan->max_packet - 1) /
+ chan->max_packet;
+ if (num_packets > max_hc_pkt_count) {
+ num_packets = max_hc_pkt_count;
+ chan->xfer_len = num_packets * chan->max_packet;
+ }
+ } else {
+ /* Need 1 packet for transfer length of 0 */
+ num_packets = 1;
+ }
+
+ if (chan->ep_is_in)
+ /*
+ * Always program an integral # of max packets for IN
+ * transfers
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ /*
+ * Make sure that the multi_count field matches the
+ * actual transfer length
+ */
+ chan->multi_count = num_packets;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ dwc2_set_pid_isoc(chan);
+
+ hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK;
+ }
+
+ chan->start_pkt_count = num_packets;
+ hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
+ hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+ TSIZ_SC_MC_PID_MASK;
+ writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
+ hctsiz, chan->hc_num);
+
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " Xfer Size: %d\n",
+ (hctsiz & TSIZ_XFERSIZE_MASK) >>
+ TSIZ_XFERSIZE_SHIFT);
+ dev_vdbg(hsotg->dev, " Num Pkts: %d\n",
+ (hctsiz & TSIZ_PKTCNT_MASK) >>
+ TSIZ_PKTCNT_SHIFT);
+ dev_vdbg(hsotg->dev, " Start PID: %d\n",
+ (hctsiz & TSIZ_SC_MC_PID_MASK) >>
+ TSIZ_SC_MC_PID_SHIFT);
+ }
+
+ if (hsotg->core_params->dma_enable > 0) {
+ dma_addr_t dma_addr;
+
+ if (chan->align_buf) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "align_buf\n");
+ dma_addr = chan->align_buf;
+ } else {
+ dma_addr = chan->xfer_dma;
+ }
+ writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
+ (unsigned long)dma_addr, chan->hc_num);
+ }
+
+ /* Start the split */
+ if (chan->do_split) {
+ u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
+
+ hcsplt |= HCSPLT_SPLTENA;
+ writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
+ }
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar &= ~HCCHAR_MULTICNT_MASK;
+ hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
+ HCCHAR_MULTICNT_MASK;
+ dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+
+ if (hcchar & HCCHAR_CHDIS)
+ dev_warn(hsotg->dev,
+ "%s: chdis set, channel %d, hcchar 0x%08x\n",
+ __func__, chan->hc_num, hcchar);
+
+ /* Set host channel enable after all other setup is complete */
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
+ (hcchar & HCCHAR_MULTICNT_MASK) >>
+ HCCHAR_MULTICNT_SHIFT);
+
+ writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+ chan->hc_num);
+
+ chan->xfer_started = 1;
+ chan->requests++;
+
+ if (hsotg->core_params->dma_enable <= 0 &&
+ !chan->ep_is_in && chan->xfer_len > 0)
+ /* Load OUT packet into the appropriate Tx FIFO */
+ dwc2_hc_write_packet(hsotg, chan);
+}
+
+/**
+ * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
+ * host channel and starts the transfer in Descriptor DMA mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
+ * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
+ * with micro-frame bitmap.
+ *
+ * Initializes HCDMA register with descriptor list address and CTD value then
+ * starts the transfer via enabling the channel.
+ */
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcchar;
+ u32 hc_dma;
+ u32 hctsiz = 0;
+
+ if (chan->do_ping)
+ hctsiz |= TSIZ_DOPNG;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ dwc2_set_pid_isoc(chan);
+
+ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
+ hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+ TSIZ_SC_MC_PID_MASK;
+
+ /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
+ hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
+
+ /* Non-zero only for high-speed interrupt endpoints */
+ hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
+
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " Start PID: %d\n",
+ chan->data_pid_start);
+ dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
+ }
+
+ writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+
+ hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK;
+
+ /* Always start from first descriptor */
+ hc_dma &= ~HCDMA_CTD_MASK;
+ writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n",
+ hc_dma, chan->hc_num);
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar &= ~HCCHAR_MULTICNT_MASK;
+ hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
+ HCCHAR_MULTICNT_MASK;
+
+ if (hcchar & HCCHAR_CHDIS)
+ dev_warn(hsotg->dev,
+ "%s: chdis set, channel %d, hcchar 0x%08x\n",
+ __func__, chan->hc_num, hcchar);
+
+ /* Set host channel enable after all other setup is complete */
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
+ (hcchar & HCCHAR_MULTICNT_MASK) >>
+ HCCHAR_MULTICNT_SHIFT);
+
+ writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+ chan->hc_num);
+
+ chan->xfer_started = 1;
+ chan->requests++;
+}
+
+/**
+ * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
+ * a previous call to dwc2_hc_start_transfer()
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * The caller must ensure there is sufficient space in the request queue and Tx
+ * Data FIFO. This function should only be called in Slave mode. In DMA mode,
+ * the controller acts autonomously to complete transfers programmed to a host
+ * channel.
+ *
+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
+ * if there is any data remaining to be queued. For an IN transfer, another
+ * data packet is always requested. For the SETUP phase of a control transfer,
+ * this function does nothing.
+ *
+ * Return: 1 if a new request is queued, 0 if no more requests are required
+ * for this transfer
+ */
+int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+
+ if (chan->do_split)
+ /* SPLITs always queue just once per channel */
+ return 0;
+
+ if (chan->data_pid_start == DWC2_HC_PID_SETUP)
+ /* SETUPs are queued only once since they can't be NAK'd */
+ return 0;
+
+ if (chan->ep_is_in) {
+ /*
+ * Always queue another request for other IN transfers. If
+ * back-to-back INs are issued and NAKs are received for both,
+ * the driver may still be processing the first NAK when the
+ * second NAK is received. When the interrupt handler clears
+ * the NAK interrupt for the first NAK, the second NAK will
+ * not be seen. So we can't depend on the NAK interrupt
+ * handler to requeue a NAK'd request. Instead, IN requests
+ * are issued each time this function is called. When the
+ * transfer completes, the extra requests for the channel will
+ * be flushed.
+ */
+ u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+
+ dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
+ hcchar);
+ writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ chan->requests++;
+ return 1;
+ }
+
+ /* OUT transfers */
+
+ if (chan->xfer_count < chan->xfer_len) {
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ u32 hcchar = readl(hsotg->regs +
+ HCCHAR(chan->hc_num));
+
+ dwc2_hc_set_even_odd_frame(hsotg, chan,
+ &hcchar);
+ }
+
+ /* Load OUT packet into the appropriate Tx FIFO */
+ dwc2_hc_write_packet(hsotg, chan);
+ chan->requests++;
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * dwc2_hc_do_ping() - Starts a PING transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. The Do Ping bit is set in
+ * the HCTSIZ register, then the channel is enabled.
+ */
+void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+ u32 hcchar;
+ u32 hctsiz;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+
+
+ hctsiz = TSIZ_DOPNG;
+ hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
+ writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+ writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+}
+
+/**
+ * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
+ * the HFIR register according to PHY type and speed
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: The caller can modify the value of the HFIR register only after the
+ * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
+ * has been set
+ */
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
+{
+ u32 usbcfg;
+ u32 hprt0;
+ int clock = 60; /* default value */
+
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ hprt0 = readl(hsotg->regs + HPRT0);
+
+ if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
+ !(usbcfg & GUSBCFG_PHYIF16))
+ clock = 60;
+ if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
+ GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
+ clock = 48;
+ if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+ clock = 30;
+ if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
+ clock = 60;
+ if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+ clock = 48;
+ if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
+ clock = 48;
+ if ((usbcfg & GUSBCFG_PHYSEL) &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+ clock = 48;
+
+ if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
+ /* High speed case */
+ return 125 * clock;
+ else
+ /* FS/LS case */
+ return 1000 * clock;
+}
+
+/**
+ * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
+ * buffer
+ *
+ * @core_if: Programming view of DWC_otg controller
+ * @dest: Destination buffer for the packet
+ * @bytes: Number of bytes to copy to the destination
+ */
+void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
+{
+ u32 __iomem *fifo = hsotg->regs + HCFIFO(0);
+ u32 *data_buf = (u32 *)dest;
+ int word_count = (bytes + 3) / 4;
+ int i;
+
+ /*
+ * Todo: Account for the case where dest is not dword aligned. This
+ * requires reading data from the FIFO into a u32 temp buffer, then
+ * moving it into the data buffer.
+ */
+
+ dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
+
+ for (i = 0; i < word_count; i++, data_buf++)
+ *data_buf = readl(fifo);
+}
+
+/**
+ * dwc2_dump_host_registers() - Prints the host registers
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+ u32 __iomem *addr;
+ int i;
+
+ dev_dbg(hsotg->dev, "Host Global Registers\n");
+ addr = hsotg->regs + HCFG;
+ dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HFIR;
+ dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HFNUM;
+ dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HPTXSTS;
+ dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HAINT;
+ dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HAINTMSK;
+ dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ addr = hsotg->regs + HFLBADDR;
+ dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ }
+
+ addr = hsotg->regs + HPRT0;
+ dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+
+ for (i = 0; i < hsotg->core_params->host_channels; i++) {
+ dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
+ addr = hsotg->regs + HCCHAR(i);
+ dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HCSPLT(i);
+ dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HCINT(i);
+ dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HCINTMSK(i);
+ dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HCTSIZ(i);
+ dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HCDMA(i);
+ dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ addr = hsotg->regs + HCDMAB(i);
+ dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ }
+ }
+#endif
+}
+
+/**
+ * dwc2_dump_global_registers() - Prints the core global registers
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+ u32 __iomem *addr;
+
+ dev_dbg(hsotg->dev, "Core Global Registers\n");
+ addr = hsotg->regs + GOTGCTL;
+ dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GOTGINT;
+ dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GAHBCFG;
+ dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GUSBCFG;
+ dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GRSTCTL;
+ dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GINTSTS;
+ dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GINTMSK;
+ dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GRXSTSR;
+ dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GRXFSIZ;
+ dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GNPTXFSIZ;
+ dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GNPTXSTS;
+ dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GI2CCTL;
+ dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GPVNDCTL;
+ dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GGPIO;
+ dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GUID;
+ dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GSNPSID;
+ dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GHWCFG1;
+ dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GHWCFG2;
+ dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GHWCFG3;
+ dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GHWCFG4;
+ dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GLPMCFG;
+ dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GPWRDN;
+ dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + GDFIFOCFG;
+ dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+ addr = hsotg->regs + HPTXFSIZ;
+ dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+
+ addr = hsotg->regs + PCGCTL;
+ dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n",
+ (unsigned long)addr, readl(addr));
+#endif
+}
+
+/**
+ * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @num: Tx FIFO to flush
+ */
+void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
+{
+ u32 greset;
+ int count = 0;
+
+ dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
+
+ greset = GRSTCTL_TXFFLSH;
+ greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
+ writel(greset, hsotg->regs + GRSTCTL);
+
+ do {
+ greset = readl(hsotg->regs + GRSTCTL);
+ if (++count > 10000) {
+ dev_warn(hsotg->dev,
+ "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
+ __func__, greset,
+ readl(hsotg->regs + GNPTXSTS));
+ break;
+ }
+ udelay(1);
+ } while (greset & GRSTCTL_TXFFLSH);
+
+ /* Wait for at least 3 PHY Clocks */
+ udelay(1);
+}
+
+/**
+ * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
+{
+ u32 greset;
+ int count = 0;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ greset = GRSTCTL_RXFFLSH;
+ writel(greset, hsotg->regs + GRSTCTL);
+
+ do {
+ greset = readl(hsotg->regs + GRSTCTL);
+ if (++count > 10000) {
+ dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n",
+ __func__, greset);
+ break;
+ }
+ udelay(1);
+ } while (greset & GRSTCTL_RXFFLSH);
+
+ /* Wait for at least 3 PHY Clocks */
+ udelay(1);
+}
+
+#define DWC2_OUT_OF_BOUNDS(a, b, c) ((a) < (b) || (a) > (c))
+
+/* Parameter access functions */
+void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ switch (val) {
+ case DWC2_CAP_PARAM_HNP_SRP_CAPABLE:
+ if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE)
+ valid = 0;
+ break;
+ case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE:
+ switch (hsotg->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ break;
+ default:
+ valid = 0;
+ break;
+ }
+ break;
+ case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE:
+ /* always valid */
+ break;
+ default:
+ valid = 0;
+ break;
+ }
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for otg_cap parameter. Check HW configuration.\n",
+ val);
+ switch (hsotg->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
+ break;
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
+ break;
+ default:
+ val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ break;
+ }
+ dev_dbg(hsotg->dev, "Setting otg_cap to %d\n", val);
+ }
+
+ hsotg->core_params->otg_cap = val;
+}
+
+void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val > 0 && hsotg->hw_params.arch == GHWCFG2_SLAVE_ONLY_ARCH)
+ valid = 0;
+ if (val < 0)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for dma_enable parameter. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.arch != GHWCFG2_SLAVE_ONLY_ARCH;
+ dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val);
+ }
+
+ hsotg->core_params->dma_enable = val;
+}
+
+void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val > 0 && (hsotg->core_params->dma_enable <= 0 ||
+ !hsotg->hw_params.dma_desc_enable))
+ valid = 0;
+ if (val < 0)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for dma_desc_enable parameter. Check HW configuration.\n",
+ val);
+ val = (hsotg->core_params->dma_enable > 0 &&
+ hsotg->hw_params.dma_desc_enable);
+ dev_dbg(hsotg->dev, "Setting dma_desc_enable to %d\n", val);
+ }
+
+ hsotg->core_params->dma_desc_enable = val;
+}
+
+void dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg,
+ int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "Wrong value for host_support_fs_low_power\n");
+ dev_err(hsotg->dev,
+ "host_support_fs_low_power must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev,
+ "Setting host_support_fs_low_power to %d\n", val);
+ }
+
+ hsotg->core_params->host_support_fs_ls_low_power = val;
+}
+
+void dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val > 0 && !hsotg->hw_params.enable_dynamic_fifo)
+ valid = 0;
+ if (val < 0)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for enable_dynamic_fifo parameter. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.enable_dynamic_fifo;
+ dev_dbg(hsotg->dev, "Setting enable_dynamic_fifo to %d\n", val);
+ }
+
+ hsotg->core_params->enable_dynamic_fifo = val;
+}
+
+void dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 16 || val > hsotg->hw_params.host_rx_fifo_size)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for host_rx_fifo_size. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.host_rx_fifo_size;
+ dev_dbg(hsotg->dev, "Setting host_rx_fifo_size to %d\n", val);
+ }
+
+ hsotg->core_params->host_rx_fifo_size = val;
+}
+
+void dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 16 || val > hsotg->hw_params.host_nperio_tx_fifo_size)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.host_nperio_tx_fifo_size;
+ dev_dbg(hsotg->dev, "Setting host_nperio_tx_fifo_size to %d\n",
+ val);
+ }
+
+ hsotg->core_params->host_nperio_tx_fifo_size = val;
+}
+
+void dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 16 || val > hsotg->hw_params.host_perio_tx_fifo_size)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.host_perio_tx_fifo_size;
+ dev_dbg(hsotg->dev, "Setting host_perio_tx_fifo_size to %d\n",
+ val);
+ }
+
+ hsotg->core_params->host_perio_tx_fifo_size = val;
+}
+
+void dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 2047 || val > hsotg->hw_params.max_transfer_size)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for max_transfer_size. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.max_transfer_size;
+ dev_dbg(hsotg->dev, "Setting max_transfer_size to %d\n", val);
+ }
+
+ hsotg->core_params->max_transfer_size = val;
+}
+
+void dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 15 || val > hsotg->hw_params.max_packet_count)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for max_packet_count. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.max_packet_count;
+ dev_dbg(hsotg->dev, "Setting max_packet_count to %d\n", val);
+ }
+
+ hsotg->core_params->max_packet_count = val;
+}
+
+void dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (val < 1 || val > hsotg->hw_params.host_channels)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for host_channels. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.host_channels;
+ dev_dbg(hsotg->dev, "Setting host_channels to %d\n", val);
+ }
+
+ hsotg->core_params->host_channels = val;
+}
+
+void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 0;
+ u32 hs_phy_type, fs_phy_type;
+
+ if (DWC2_OUT_OF_BOUNDS(val, DWC2_PHY_TYPE_PARAM_FS,
+ DWC2_PHY_TYPE_PARAM_ULPI)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for phy_type\n");
+ dev_err(hsotg->dev, "phy_type must be 0, 1 or 2\n");
+ }
+
+ valid = 0;
+ }
+
+ hs_phy_type = hsotg->hw_params.hs_phy_type;
+ fs_phy_type = hsotg->hw_params.fs_phy_type;
+ if (val == DWC2_PHY_TYPE_PARAM_UTMI &&
+ (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI ||
+ hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI))
+ valid = 1;
+ else if (val == DWC2_PHY_TYPE_PARAM_ULPI &&
+ (hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI ||
+ hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI))
+ valid = 1;
+ else if (val == DWC2_PHY_TYPE_PARAM_FS &&
+ fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+ valid = 1;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for phy_type. Check HW configuration.\n",
+ val);
+ val = DWC2_PHY_TYPE_PARAM_FS;
+ if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) {
+ if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI ||
+ hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)
+ val = DWC2_PHY_TYPE_PARAM_UTMI;
+ else
+ val = DWC2_PHY_TYPE_PARAM_ULPI;
+ }
+ dev_dbg(hsotg->dev, "Setting phy_type to %d\n", val);
+ }
+
+ hsotg->core_params->phy_type = val;
+}
+
+static int dwc2_get_param_phy_type(struct dwc2_hsotg *hsotg)
+{
+ return hsotg->core_params->phy_type;
+}
+
+void dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for speed parameter\n");
+ dev_err(hsotg->dev, "max_speed parameter must be 0 or 1\n");
+ }
+ valid = 0;
+ }
+
+ if (val == DWC2_SPEED_PARAM_HIGH &&
+ dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for speed parameter. Check HW configuration.\n",
+ val);
+ val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS ?
+ DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH;
+ dev_dbg(hsotg->dev, "Setting speed to %d\n", val);
+ }
+
+ hsotg->core_params->speed = val;
+}
+
+void dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (DWC2_OUT_OF_BOUNDS(val, DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ,
+ DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "Wrong value for host_ls_low_power_phy_clk parameter\n");
+ dev_err(hsotg->dev,
+ "host_ls_low_power_phy_clk must be 0 or 1\n");
+ }
+ valid = 0;
+ }
+
+ if (val == DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ &&
+ dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n",
+ val);
+ val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS
+ ? DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ
+ : DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ;
+ dev_dbg(hsotg->dev, "Setting host_ls_low_power_phy_clk to %d\n",
+ val);
+ }
+
+ hsotg->core_params->host_ls_low_power_phy_clk = val;
+}
+
+void dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for phy_ulpi_ddr\n");
+ dev_err(hsotg->dev, "phy_upli_ddr must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting phy_upli_ddr to %d\n", val);
+ }
+
+ hsotg->core_params->phy_ulpi_ddr = val;
+}
+
+void dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "Wrong value for phy_ulpi_ext_vbus\n");
+ dev_err(hsotg->dev,
+ "phy_ulpi_ext_vbus must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting phy_ulpi_ext_vbus to %d\n", val);
+ }
+
+ hsotg->core_params->phy_ulpi_ext_vbus = val;
+}
+
+void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 0;
+
+ switch (hsotg->hw_params.utmi_phy_data_width) {
+ case GHWCFG4_UTMI_PHY_DATA_WIDTH_8:
+ valid = (val == 8);
+ break;
+ case GHWCFG4_UTMI_PHY_DATA_WIDTH_16:
+ valid = (val == 16);
+ break;
+ case GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16:
+ valid = (val == 8 || val == 16);
+ break;
+ }
+
+ if (!valid) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "%d invalid for phy_utmi_width. Check HW configuration.\n",
+ val);
+ }
+ val = (hsotg->hw_params.utmi_phy_data_width ==
+ GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
+ dev_dbg(hsotg->dev, "Setting phy_utmi_width to %d\n", val);
+ }
+
+ hsotg->core_params->phy_utmi_width = val;
+}
+
+void dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for ulpi_fs_ls\n");
+ dev_err(hsotg->dev, "ulpi_fs_ls must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting ulpi_fs_ls to %d\n", val);
+ }
+
+ hsotg->core_params->ulpi_fs_ls = val;
+}
+
+void dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for ts_dline\n");
+ dev_err(hsotg->dev, "ts_dline must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting ts_dline to %d\n", val);
+ }
+
+ hsotg->core_params->ts_dline = val;
+}
+
+void dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev, "Wrong value for i2c_enable\n");
+ dev_err(hsotg->dev, "i2c_enable must be 0 or 1\n");
+ }
+
+ valid = 0;
+ }
+
+ if (val == 1 && !(hsotg->hw_params.i2c_enable))
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for i2c_enable. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.i2c_enable;
+ dev_dbg(hsotg->dev, "Setting i2c_enable to %d\n", val);
+ }
+
+ hsotg->core_params->i2c_enable = val;
+}
+
+void dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "Wrong value for en_multiple_tx_fifo,\n");
+ dev_err(hsotg->dev,
+ "en_multiple_tx_fifo must be 0 or 1\n");
+ }
+ valid = 0;
+ }
+
+ if (val == 1 && !hsotg->hw_params.en_multiple_tx_fifo)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.en_multiple_tx_fifo;
+ dev_dbg(hsotg->dev, "Setting en_multiple_tx_fifo to %d\n", val);
+ }
+
+ hsotg->core_params->en_multiple_tx_fifo = val;
+}
+
+void dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val)
+{
+ int valid = 1;
+
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter reload_ctl\n", val);
+ dev_err(hsotg->dev, "reload_ctl must be 0 or 1\n");
+ }
+ valid = 0;
+ }
+
+ if (val == 1 && hsotg->hw_params.snpsid < DWC2_CORE_REV_2_92a)
+ valid = 0;
+
+ if (!valid) {
+ if (val >= 0)
+ dev_err(hsotg->dev,
+ "%d invalid for parameter reload_ctl. Check HW configuration.\n",
+ val);
+ val = hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_92a;
+ dev_dbg(hsotg->dev, "Setting reload_ctl to %d\n", val);
+ }
+
+ hsotg->core_params->reload_ctl = val;
+}
+
+void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val)
+{
+ if (val != -1)
+ hsotg->core_params->ahbcfg = val;
+ else
+ hsotg->core_params->ahbcfg = GAHBCFG_HBSTLEN_INCR4 <<
+ GAHBCFG_HBSTLEN_SHIFT;
+}
+
+void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter otg_ver\n", val);
+ dev_err(hsotg->dev,
+ "otg_ver must be 0 (for OTG 1.3 support) or 1 (for OTG 2.0 support)\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting otg_ver to %d\n", val);
+ }
+
+ hsotg->core_params->otg_ver = val;
+}
+
+static void dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter uframe_sched\n",
+ val);
+ dev_err(hsotg->dev, "uframe_sched must be 0 or 1\n");
+ }
+ val = 1;
+ dev_dbg(hsotg->dev, "Setting uframe_sched to %d\n", val);
+ }
+
+ hsotg->core_params->uframe_sched = val;
+}
+
+/*
+ * This function is called during module intialization to pass module parameters
+ * for the DWC_otg core.
+ */
+void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
+ const struct dwc2_core_params *params)
+{
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ dwc2_set_param_otg_cap(hsotg, params->otg_cap);
+ dwc2_set_param_dma_enable(hsotg, params->dma_enable);
+ dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
+ dwc2_set_param_host_support_fs_ls_low_power(hsotg,
+ params->host_support_fs_ls_low_power);
+ dwc2_set_param_enable_dynamic_fifo(hsotg,
+ params->enable_dynamic_fifo);
+ dwc2_set_param_host_rx_fifo_size(hsotg,
+ params->host_rx_fifo_size);
+ dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+ params->host_nperio_tx_fifo_size);
+ dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+ params->host_perio_tx_fifo_size);
+ dwc2_set_param_max_transfer_size(hsotg,
+ params->max_transfer_size);
+ dwc2_set_param_max_packet_count(hsotg,
+ params->max_packet_count);
+ dwc2_set_param_host_channels(hsotg, params->host_channels);
+ dwc2_set_param_phy_type(hsotg, params->phy_type);
+ dwc2_set_param_speed(hsotg, params->speed);
+ dwc2_set_param_host_ls_low_power_phy_clk(hsotg,
+ params->host_ls_low_power_phy_clk);
+ dwc2_set_param_phy_ulpi_ddr(hsotg, params->phy_ulpi_ddr);
+ dwc2_set_param_phy_ulpi_ext_vbus(hsotg,
+ params->phy_ulpi_ext_vbus);
+ dwc2_set_param_phy_utmi_width(hsotg, params->phy_utmi_width);
+ dwc2_set_param_ulpi_fs_ls(hsotg, params->ulpi_fs_ls);
+ dwc2_set_param_ts_dline(hsotg, params->ts_dline);
+ dwc2_set_param_i2c_enable(hsotg, params->i2c_enable);
+ dwc2_set_param_en_multiple_tx_fifo(hsotg,
+ params->en_multiple_tx_fifo);
+ dwc2_set_param_reload_ctl(hsotg, params->reload_ctl);
+ dwc2_set_param_ahbcfg(hsotg, params->ahbcfg);
+ dwc2_set_param_otg_ver(hsotg, params->otg_ver);
+ dwc2_set_param_uframe_sched(hsotg, params->uframe_sched);
+}
+
+/**
+ * During device initialization, read various hardware configuration
+ * registers and interpret the contents.
+ */
+int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ unsigned width;
+ u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
+ u32 hptxfsiz, grxfsiz, gnptxfsiz;
+ u32 gusbcfg;
+
+ /*
+ * Attempt to ensure this device is really a DWC_otg Controller.
+ * Read and verify the GSNPSID register contents. The value should be
+ * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3",
+ * as in "OTG version 2.xx" or "OTG version 3.xx".
+ */
+ hw->snpsid = readl(hsotg->regs + GSNPSID);
+ if ((hw->snpsid & 0xfffff000) != 0x4f542000 &&
+ (hw->snpsid & 0xfffff000) != 0x4f543000) {
+ dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
+ hw->snpsid);
+ return -ENODEV;
+ }
+
+ dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
+ hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
+ hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
+
+ hwcfg1 = readl(hsotg->regs + GHWCFG1);
+ hwcfg2 = readl(hsotg->regs + GHWCFG2);
+ hwcfg3 = readl(hsotg->regs + GHWCFG3);
+ hwcfg4 = readl(hsotg->regs + GHWCFG4);
+ grxfsiz = readl(hsotg->regs + GRXFSIZ);
+
+ dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1);
+ dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2);
+ dev_dbg(hsotg->dev, "hwcfg3=%08x\n", hwcfg3);
+ dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
+ dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
+
+ /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg |= GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ usleep_range(100000, 150000);
+
+ gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ);
+ hptxfsiz = readl(hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+ dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ usleep_range(100000, 150000);
+
+ /* hwcfg2 */
+ hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+ GHWCFG2_OP_MODE_SHIFT;
+ hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >>
+ GHWCFG2_ARCHITECTURE_SHIFT;
+ hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO);
+ hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >>
+ GHWCFG2_NUM_HOST_CHAN_SHIFT);
+ hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >>
+ GHWCFG2_HS_PHY_TYPE_SHIFT;
+ hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >>
+ GHWCFG2_FS_PHY_TYPE_SHIFT;
+ hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >>
+ GHWCFG2_NUM_DEV_EP_SHIFT;
+ hw->nperio_tx_q_depth =
+ (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >>
+ GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1;
+ hw->host_perio_tx_q_depth =
+ (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >>
+ GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1;
+ hw->dev_token_q_depth =
+ (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >>
+ GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT;
+
+ /* hwcfg3 */
+ width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
+ GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
+ hw->max_transfer_size = (1 << (width + 11)) - 1;
+ /*
+ * Clip max_transfer_size to 65535. dwc2_hc_setup_align_buf() allocates
+ * coherent buffers with this size, and if it's too large we can
+ * exhaust the coherent DMA pool.
+ */
+ if (hw->max_transfer_size > 65535)
+ hw->max_transfer_size = 65535;
+ width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
+ GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
+ hw->max_packet_count = (1 << (width + 4)) - 1;
+ hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C);
+ hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >>
+ GHWCFG3_DFIFO_DEPTH_SHIFT;
+
+ /* hwcfg4 */
+ hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN);
+ hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >>
+ GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
+ hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA);
+ hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ);
+ hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >>
+ GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT;
+
+ /* fifo sizes */
+ hw->host_rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
+ GRXFSIZ_DEPTH_SHIFT;
+ hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+ hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+
+ dev_dbg(hsotg->dev, "Detected values from hardware:\n");
+ dev_dbg(hsotg->dev, " op_mode=%d\n",
+ hw->op_mode);
+ dev_dbg(hsotg->dev, " arch=%d\n",
+ hw->arch);
+ dev_dbg(hsotg->dev, " dma_desc_enable=%d\n",
+ hw->dma_desc_enable);
+ dev_dbg(hsotg->dev, " power_optimized=%d\n",
+ hw->power_optimized);
+ dev_dbg(hsotg->dev, " i2c_enable=%d\n",
+ hw->i2c_enable);
+ dev_dbg(hsotg->dev, " hs_phy_type=%d\n",
+ hw->hs_phy_type);
+ dev_dbg(hsotg->dev, " fs_phy_type=%d\n",
+ hw->fs_phy_type);
+ dev_dbg(hsotg->dev, " utmi_phy_data_wdith=%d\n",
+ hw->utmi_phy_data_width);
+ dev_dbg(hsotg->dev, " num_dev_ep=%d\n",
+ hw->num_dev_ep);
+ dev_dbg(hsotg->dev, " num_dev_perio_in_ep=%d\n",
+ hw->num_dev_perio_in_ep);
+ dev_dbg(hsotg->dev, " host_channels=%d\n",
+ hw->host_channels);
+ dev_dbg(hsotg->dev, " max_transfer_size=%d\n",
+ hw->max_transfer_size);
+ dev_dbg(hsotg->dev, " max_packet_count=%d\n",
+ hw->max_packet_count);
+ dev_dbg(hsotg->dev, " nperio_tx_q_depth=0x%0x\n",
+ hw->nperio_tx_q_depth);
+ dev_dbg(hsotg->dev, " host_perio_tx_q_depth=0x%0x\n",
+ hw->host_perio_tx_q_depth);
+ dev_dbg(hsotg->dev, " dev_token_q_depth=0x%0x\n",
+ hw->dev_token_q_depth);
+ dev_dbg(hsotg->dev, " enable_dynamic_fifo=%d\n",
+ hw->enable_dynamic_fifo);
+ dev_dbg(hsotg->dev, " en_multiple_tx_fifo=%d\n",
+ hw->en_multiple_tx_fifo);
+ dev_dbg(hsotg->dev, " total_fifo_size=%d\n",
+ hw->total_fifo_size);
+ dev_dbg(hsotg->dev, " host_rx_fifo_size=%d\n",
+ hw->host_rx_fifo_size);
+ dev_dbg(hsotg->dev, " host_nperio_tx_fifo_size=%d\n",
+ hw->host_nperio_tx_fifo_size);
+ dev_dbg(hsotg->dev, " host_perio_tx_fifo_size=%d\n",
+ hw->host_perio_tx_fifo_size);
+ dev_dbg(hsotg->dev, "\n");
+
+ return 0;
+}
+
+u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg)
+{
+ return hsotg->core_params->otg_ver == 1 ? 0x0200 : 0x0103;
+}
+
+bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
+{
+ if (readl(hsotg->regs + GSNPSID) == 0xffffffff)
+ return false;
+ else
+ return true;
+}
+
+/**
+ * dwc2_enable_global_interrupts() - Enables the controller's Global
+ * Interrupt in the AHB Config register
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
+
+ ahbcfg |= GAHBCFG_GLBL_INTR_EN;
+ writel(ahbcfg, hsotg->regs + GAHBCFG);
+}
+
+/**
+ * dwc2_disable_global_interrupts() - Disables the controller's Global
+ * Interrupt in the AHB Config register
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
+
+ ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
+ writel(ahbcfg, hsotg->regs + GAHBCFG);
+}
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
+MODULE_AUTHOR("Synopsys, Inc.");
+MODULE_LICENSE("Dual BSD/GPL");
Code Review / kvmfornfv.git / blobdiff