Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / usb / c67x00 / c67x00.h
diff --git a/kernel/drivers/usb/c67x00/c67x00.h b/kernel/drivers/usb/c67x00/c67x00.h
new file mode 100644 (file)
index 0000000..a26e9de
--- /dev/null
@@ -0,0 +1,294 @@
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG             0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x)         ((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x)      ((x) ? 0x0800 : 0x0400)
+#define HOST_MODE              0x0200
+#define PORT_RES_EN(x)         ((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x)          ((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x)                ((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG            0x0001
+#define EP1_IRQ_FLG            0x0002
+#define EP2_IRQ_FLG            0x0004
+#define EP3_IRQ_FLG            0x0008
+#define EP4_IRQ_FLG            0x0010
+#define EP5_IRQ_FLG            0x0020
+#define EP6_IRQ_FLG            0x0040
+#define EP7_IRQ_FLG            0x0080
+#define RESET_IRQ_FLG          0x0100
+#define SOF_EOP_IRQ_FLG                0x0200
+#define ID_IRQ_FLG             0x4000
+#define VBUS_IRQ_FLG           0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x)                ((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN            0x0080  /* Preamble enable */
+#define SEQ_SEL                        0x0040  /* Data Toggle Sequence Bit Select */
+#define ISO_EN                 0x0010  /* Isochronous enable  */
+#define ARM_EN                 0x0001  /* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x)     ((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN         0x0200  /* SOF/EOP Interrupt Enable  */
+#define SOF_EOP_TMOUT_IRQ_EN   0x0800  /* SOF/EOP Timeout Interrupt Enable  */
+#define ID_IRQ_EN              0x4000  /* ID interrupt enable */
+#define VBUS_IRQ_EN            0x8000  /* VBUS interrupt enable */
+#define DONE_IRQ_EN            0x0001  /* Done Interrupt Enable  */
+
+/* USB status register */
+#define HOST_STAT_MASK         0x02FD
+#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x)     ((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x)      ((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK                0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x)   ((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)   ((dev)                  \
+                                                ? (0x0280 + (ep << 4)) \
+                                                : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)  ((dev)                  \
+                                                ? (0x0286 + (ep << 4)) \
+                                                : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev)  ((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x)          (1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x)          (1 << (4 + (x)))
+#define RESET_FLG(x)           ((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x)            (1 << (2 + (x)))
+#define RESUME_FLG(x)          (1 << (6 + (x)))
+#define MBX_OUT_FLG            0x0001  /* Message out available */
+#define MBX_IN_FLG             0x0100
+#define ID_FLG                 0x4000
+#define VBUS_FLG               0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG    0x0142
+
+#define HPI_SWAP_ENABLE(x)     ((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x)  ((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x)        ((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x)    ((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x)    ((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE       0x4000
+#define VBUS_TO_HPI_ENABLE     0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x)          ((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone                0x1000
+
+#define SUSB_EP0_MSG           0x0001
+#define SUSB_EP1_MSG           0x0002
+#define SUSB_EP2_MSG           0x0004
+#define SUSB_EP3_MSG           0x0008
+#define SUSB_EP4_MSG           0x0010
+#define SUSB_EP5_MSG           0x0020
+#define SUSB_EP6_MSG           0x0040
+#define SUSB_EP7_MSG           0x0080
+#define SUSB_RST_MSG           0x0100
+#define SUSB_SOF_MSG           0x0200
+#define SUSB_CFG_MSG           0x0400
+#define SUSB_SUS_MSG           0x0800
+#define SUSB_ID_MSG            0x4000
+#define SUSB_VBUS_MSG          0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x)   ((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x)      ((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x)  ((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR                0x500   /* Base address for host */
+#define SIE_TD_SIZE            0x200   /* size of the td list */
+#define SIE_TD_BUF_SIZE                0x400   /* size of the data buffer */
+
+#define SIE_TD_OFFSET(host)    ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host)   (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE 0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE 8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
+                                        ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS       (CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE       0x1800
+#define CY_UDC_REQ_BUFFER_BASE         0x2000
+#define CY_UDC_REQ_BUFFER_SIZE         0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
+                                        ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+       /* Entries to be used by the subdrivers */
+       spinlock_t lock;        /* protect this structure */
+       void *private_data;
+       void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+       /* Read only: */
+       struct c67x00_device *dev;
+       int sie_num;
+       int mode;
+};
+
+#define sie_dev(s)     (&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+       /* Internal use only */
+       struct mutex mutex;
+       struct completion msg_received;
+       u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+       void __iomem *base;
+       int regstep;
+       spinlock_t lock;
+       struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES    2
+#define C67X00_PORTS   2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+       struct c67x00_hpi hpi;
+       struct c67x00_sie sie[C67X00_SIES];
+       struct platform_device *pdev;
+       struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+                             void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+                            void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif                         /* _USB_C67X00_H */