--- /dev/null
+/*****************************************************************************/
+/*
+ * moxa.c -- MOXA Intellio family multiport serial driver.
+ *
+ * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * This code is loosely based on the Linux serial driver, written by
+ * Linus Torvalds, Theodore T'so and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * MOXA Intellio Series Driver
+ * for : LINUX
+ * date : 1999/1/7
+ * version : 5.1
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/serial.h>
+#include <linux/tty_driver.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/ratelimit.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include "moxa.h"
+
+#define MOXA_VERSION "6.0k"
+
+#define MOXA_FW_HDRLEN 32
+
+#define MOXAMAJOR 172
+
+#define MAX_BOARDS 4 /* Don't change this value */
+#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
+#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
+
+#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
+ (brd)->boardType == MOXA_BOARD_C320_PCI)
+
+/*
+ * Define the Moxa PCI vendor and device IDs.
+ */
+#define MOXA_BUS_TYPE_ISA 0
+#define MOXA_BUS_TYPE_PCI 1
+
+enum {
+ MOXA_BOARD_C218_PCI = 1,
+ MOXA_BOARD_C218_ISA,
+ MOXA_BOARD_C320_PCI,
+ MOXA_BOARD_C320_ISA,
+ MOXA_BOARD_CP204J,
+};
+
+static char *moxa_brdname[] =
+{
+ "C218 Turbo PCI series",
+ "C218 Turbo ISA series",
+ "C320 Turbo PCI series",
+ "C320 Turbo ISA series",
+ "CP-204J series",
+};
+
+#ifdef CONFIG_PCI
+static struct pci_device_id moxa_pcibrds[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
+ .driver_data = MOXA_BOARD_C218_PCI },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
+ .driver_data = MOXA_BOARD_C320_PCI },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
+ .driver_data = MOXA_BOARD_CP204J },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
+#endif /* CONFIG_PCI */
+
+struct moxa_port;
+
+static struct moxa_board_conf {
+ int boardType;
+ int numPorts;
+ int busType;
+
+ unsigned int ready;
+
+ struct moxa_port *ports;
+
+ void __iomem *basemem;
+ void __iomem *intNdx;
+ void __iomem *intPend;
+ void __iomem *intTable;
+} moxa_boards[MAX_BOARDS];
+
+struct mxser_mstatus {
+ tcflag_t cflag;
+ int cts;
+ int dsr;
+ int ri;
+ int dcd;
+};
+
+struct moxaq_str {
+ int inq;
+ int outq;
+};
+
+struct moxa_port {
+ struct tty_port port;
+ struct moxa_board_conf *board;
+ void __iomem *tableAddr;
+
+ int type;
+ int cflag;
+ unsigned long statusflags;
+
+ u8 DCDState; /* Protected by the port lock */
+ u8 lineCtrl;
+ u8 lowChkFlag;
+};
+
+struct mon_str {
+ int tick;
+ int rxcnt[MAX_PORTS];
+ int txcnt[MAX_PORTS];
+};
+
+/* statusflags */
+#define TXSTOPPED 1
+#define LOWWAIT 2
+#define EMPTYWAIT 3
+
+#define SERIAL_DO_RESTART
+
+#define WAKEUP_CHARS 256
+
+static int ttymajor = MOXAMAJOR;
+static struct mon_str moxaLog;
+static unsigned int moxaFuncTout = HZ / 2;
+static unsigned int moxaLowWaterChk;
+static DEFINE_MUTEX(moxa_openlock);
+static DEFINE_SPINLOCK(moxa_lock);
+
+static unsigned long baseaddr[MAX_BOARDS];
+static unsigned int type[MAX_BOARDS];
+static unsigned int numports[MAX_BOARDS];
+static struct tty_port moxa_service_port;
+
+MODULE_AUTHOR("William Chen");
+MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("c218tunx.cod");
+MODULE_FIRMWARE("cp204unx.cod");
+MODULE_FIRMWARE("c320tunx.cod");
+
+module_param_array(type, uint, NULL, 0);
+MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
+module_param_array(baseaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(baseaddr, "base address");
+module_param_array(numports, uint, NULL, 0);
+MODULE_PARM_DESC(numports, "numports (ignored for C218)");
+
+module_param(ttymajor, int, 0);
+
+/*
+ * static functions:
+ */
+static int moxa_open(struct tty_struct *, struct file *);
+static void moxa_close(struct tty_struct *, struct file *);
+static int moxa_write(struct tty_struct *, const unsigned char *, int);
+static int moxa_write_room(struct tty_struct *);
+static void moxa_flush_buffer(struct tty_struct *);
+static int moxa_chars_in_buffer(struct tty_struct *);
+static void moxa_set_termios(struct tty_struct *, struct ktermios *);
+static void moxa_stop(struct tty_struct *);
+static void moxa_start(struct tty_struct *);
+static void moxa_hangup(struct tty_struct *);
+static int moxa_tiocmget(struct tty_struct *tty);
+static int moxa_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+static void moxa_poll(unsigned long);
+static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
+static void moxa_shutdown(struct tty_port *);
+static int moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, int);
+/*
+ * moxa board interface functions:
+ */
+static void MoxaPortEnable(struct moxa_port *);
+static void MoxaPortDisable(struct moxa_port *);
+static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
+static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
+static void MoxaPortLineCtrl(struct moxa_port *, int, int);
+static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
+static int MoxaPortLineStatus(struct moxa_port *);
+static void MoxaPortFlushData(struct moxa_port *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
+static int MoxaPortReadData(struct moxa_port *);
+static int MoxaPortTxQueue(struct moxa_port *);
+static int MoxaPortRxQueue(struct moxa_port *);
+static int MoxaPortTxFree(struct moxa_port *);
+static void MoxaPortTxDisable(struct moxa_port *);
+static void MoxaPortTxEnable(struct moxa_port *);
+static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
+static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
+static void MoxaSetFifo(struct moxa_port *port, int enable);
+
+/*
+ * I/O functions
+ */
+
+static DEFINE_SPINLOCK(moxafunc_lock);
+
+static void moxa_wait_finish(void __iomem *ofsAddr)
+{
+ unsigned long end = jiffies + moxaFuncTout;
+
+ while (readw(ofsAddr + FuncCode) != 0)
+ if (time_after(jiffies, end))
+ return;
+ if (readw(ofsAddr + FuncCode) != 0)
+ printk_ratelimited(KERN_WARNING "moxa function expired\n");
+}
+
+static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&moxafunc_lock, flags);
+ writew(arg, ofsAddr + FuncArg);
+ writew(cmd, ofsAddr + FuncCode);
+ moxa_wait_finish(ofsAddr);
+ spin_unlock_irqrestore(&moxafunc_lock, flags);
+}
+
+static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+ unsigned long flags;
+ u16 ret;
+ spin_lock_irqsave(&moxafunc_lock, flags);
+ writew(arg, ofsAddr + FuncArg);
+ writew(cmd, ofsAddr + FuncCode);
+ moxa_wait_finish(ofsAddr);
+ ret = readw(ofsAddr + FuncArg);
+ spin_unlock_irqrestore(&moxafunc_lock, flags);
+ return ret;
+}
+
+static void moxa_low_water_check(void __iomem *ofsAddr)
+{
+ u16 rptr, wptr, mask, len;
+
+ if (readb(ofsAddr + FlagStat) & Xoff_state) {
+ rptr = readw(ofsAddr + RXrptr);
+ wptr = readw(ofsAddr + RXwptr);
+ mask = readw(ofsAddr + RX_mask);
+ len = (wptr - rptr) & mask;
+ if (len <= Low_water)
+ moxafunc(ofsAddr, FC_SendXon, 0);
+ }
+}
+
+/*
+ * TTY operations
+ */
+
+static int moxa_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct moxa_port *ch = tty->driver_data;
+ void __user *argp = (void __user *)arg;
+ int status, ret = 0;
+
+ if (tty->index == MAX_PORTS) {
+ if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
+ cmd != MOXA_GETMSTATUS)
+ return -EINVAL;
+ } else if (!ch)
+ return -ENODEV;
+
+ switch (cmd) {
+ case MOXA_GETDATACOUNT:
+ moxaLog.tick = jiffies;
+ if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
+ ret = -EFAULT;
+ break;
+ case MOXA_FLUSH_QUEUE:
+ MoxaPortFlushData(ch, arg);
+ break;
+ case MOXA_GET_IOQUEUE: {
+ struct moxaq_str __user *argm = argp;
+ struct moxaq_str tmp;
+ struct moxa_port *p;
+ unsigned int i, j;
+
+ for (i = 0; i < MAX_BOARDS; i++) {
+ p = moxa_boards[i].ports;
+ for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ memset(&tmp, 0, sizeof(tmp));
+ spin_lock_bh(&moxa_lock);
+ if (moxa_boards[i].ready) {
+ tmp.inq = MoxaPortRxQueue(p);
+ tmp.outq = MoxaPortTxQueue(p);
+ }
+ spin_unlock_bh(&moxa_lock);
+ if (copy_to_user(argm, &tmp, sizeof(tmp)))
+ return -EFAULT;
+ }
+ }
+ break;
+ } case MOXA_GET_OQUEUE:
+ status = MoxaPortTxQueue(ch);
+ ret = put_user(status, (unsigned long __user *)argp);
+ break;
+ case MOXA_GET_IQUEUE:
+ status = MoxaPortRxQueue(ch);
+ ret = put_user(status, (unsigned long __user *)argp);
+ break;
+ case MOXA_GETMSTATUS: {
+ struct mxser_mstatus __user *argm = argp;
+ struct mxser_mstatus tmp;
+ struct moxa_port *p;
+ unsigned int i, j;
+
+ for (i = 0; i < MAX_BOARDS; i++) {
+ p = moxa_boards[i].ports;
+ for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ struct tty_struct *ttyp;
+ memset(&tmp, 0, sizeof(tmp));
+ spin_lock_bh(&moxa_lock);
+ if (!moxa_boards[i].ready) {
+ spin_unlock_bh(&moxa_lock);
+ goto copy;
+ }
+
+ status = MoxaPortLineStatus(p);
+ spin_unlock_bh(&moxa_lock);
+
+ if (status & 1)
+ tmp.cts = 1;
+ if (status & 2)
+ tmp.dsr = 1;
+ if (status & 4)
+ tmp.dcd = 1;
+
+ ttyp = tty_port_tty_get(&p->port);
+ if (!ttyp)
+ tmp.cflag = p->cflag;
+ else
+ tmp.cflag = ttyp->termios.c_cflag;
+ tty_kref_put(ttyp);
+copy:
+ if (copy_to_user(argm, &tmp, sizeof(tmp)))
+ return -EFAULT;
+ }
+ }
+ break;
+ }
+ case TIOCGSERIAL:
+ mutex_lock(&ch->port.mutex);
+ ret = moxa_get_serial_info(ch, argp);
+ mutex_unlock(&ch->port.mutex);
+ break;
+ case TIOCSSERIAL:
+ mutex_lock(&ch->port.mutex);
+ ret = moxa_set_serial_info(ch, argp);
+ mutex_unlock(&ch->port.mutex);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+ return ret;
+}
+
+static int moxa_break_ctl(struct tty_struct *tty, int state)
+{
+ struct moxa_port *port = tty->driver_data;
+
+ moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
+ Magic_code);
+ return 0;
+}
+
+static const struct tty_operations moxa_ops = {
+ .open = moxa_open,
+ .close = moxa_close,
+ .write = moxa_write,
+ .write_room = moxa_write_room,
+ .flush_buffer = moxa_flush_buffer,
+ .chars_in_buffer = moxa_chars_in_buffer,
+ .ioctl = moxa_ioctl,
+ .set_termios = moxa_set_termios,
+ .stop = moxa_stop,
+ .start = moxa_start,
+ .hangup = moxa_hangup,
+ .break_ctl = moxa_break_ctl,
+ .tiocmget = moxa_tiocmget,
+ .tiocmset = moxa_tiocmset,
+};
+
+static const struct tty_port_operations moxa_port_ops = {
+ .carrier_raised = moxa_carrier_raised,
+ .dtr_rts = moxa_dtr_rts,
+ .shutdown = moxa_shutdown,
+};
+
+static struct tty_driver *moxaDriver;
+static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
+
+/*
+ * HW init
+ */
+
+static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
+{
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ if (model != 1)
+ goto err;
+ break;
+ case MOXA_BOARD_CP204J:
+ if (model != 3)
+ goto err;
+ break;
+ default:
+ if (model != 2)
+ goto err;
+ break;
+ }
+ return 0;
+err:
+ return -EINVAL;
+}
+
+static int moxa_check_fw(const void *ptr)
+{
+ const __le16 *lptr = ptr;
+
+ if (*lptr != cpu_to_le16(0x7980))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+ u16 tmp;
+
+ writeb(HW_reset, baseAddr + Control_reg); /* reset */
+ msleep(10);
+ memset_io(baseAddr, 0, 4096);
+ memcpy_toio(baseAddr, buf, len); /* download BIOS */
+ writeb(0, baseAddr + Control_reg); /* restart */
+
+ msleep(2000);
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ tmp = readw(baseAddr + C218_key);
+ if (tmp != C218_KeyCode)
+ goto err;
+ break;
+ case MOXA_BOARD_CP204J:
+ tmp = readw(baseAddr + C218_key);
+ if (tmp != CP204J_KeyCode)
+ goto err;
+ break;
+ default:
+ tmp = readw(baseAddr + C320_key);
+ if (tmp != C320_KeyCode)
+ goto err;
+ tmp = readw(baseAddr + C320_status);
+ if (tmp != STS_init) {
+ printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
+ "module not found\n");
+ return -EIO;
+ }
+ break;
+ }
+
+ return 0;
+err:
+ printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
+ return -EIO;
+}
+
+static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+
+ if (len < 7168) {
+ printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
+ return -EINVAL;
+ }
+
+ writew(len - 7168 - 2, baseAddr + C320bapi_len);
+ writeb(1, baseAddr + Control_reg); /* Select Page 1 */
+ memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
+ writeb(2, baseAddr + Control_reg); /* Select Page 2 */
+ memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
+
+ return 0;
+}
+
+static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
+ size_t len)
+{
+ void __iomem *baseAddr = brd->basemem;
+ const __le16 *uptr = ptr;
+ size_t wlen, len2, j;
+ unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
+ unsigned int i, retry;
+ u16 usum, keycode;
+
+ keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
+ C218_KeyCode;
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_CP204J:
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ key = C218_key;
+ loadbuf = C218_LoadBuf;
+ loadlen = C218DLoad_len;
+ checksum = C218check_sum;
+ checksum_ok = C218chksum_ok;
+ break;
+ default:
+ key = C320_key;
+ keycode = C320_KeyCode;
+ loadbuf = C320_LoadBuf;
+ loadlen = C320DLoad_len;
+ checksum = C320check_sum;
+ checksum_ok = C320chksum_ok;
+ break;
+ }
+
+ usum = 0;
+ wlen = len >> 1;
+ for (i = 0; i < wlen; i++)
+ usum += le16_to_cpu(uptr[i]);
+ retry = 0;
+ do {
+ wlen = len >> 1;
+ j = 0;
+ while (wlen) {
+ len2 = (wlen > 2048) ? 2048 : wlen;
+ wlen -= len2;
+ memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
+ j += len2 << 1;
+
+ writew(len2, baseAddr + loadlen);
+ writew(0, baseAddr + key);
+ for (i = 0; i < 100; i++) {
+ if (readw(baseAddr + key) == keycode)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + key) != keycode)
+ return -EIO;
+ }
+ writew(0, baseAddr + loadlen);
+ writew(usum, baseAddr + checksum);
+ writew(0, baseAddr + key);
+ for (i = 0; i < 100; i++) {
+ if (readw(baseAddr + key) == keycode)
+ break;
+ msleep(10);
+ }
+ retry++;
+ } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
+ if (readb(baseAddr + checksum_ok) != 1)
+ return -EIO;
+
+ writew(0, baseAddr + key);
+ for (i = 0; i < 600; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+
+ if (MOXA_IS_320(brd)) {
+ if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
+ writew(0x3800, baseAddr + TMS320_PORT1);
+ writew(0x3900, baseAddr + TMS320_PORT2);
+ writew(28499, baseAddr + TMS320_CLOCK);
+ } else {
+ writew(0x3200, baseAddr + TMS320_PORT1);
+ writew(0x3400, baseAddr + TMS320_PORT2);
+ writew(19999, baseAddr + TMS320_CLOCK);
+ }
+ }
+ writew(1, baseAddr + Disable_IRQ);
+ writew(0, baseAddr + Magic_no);
+ for (i = 0; i < 500; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+
+ if (MOXA_IS_320(brd)) {
+ j = readw(baseAddr + Module_cnt);
+ if (j <= 0)
+ return -EIO;
+ brd->numPorts = j * 8;
+ writew(j, baseAddr + Module_no);
+ writew(0, baseAddr + Magic_no);
+ for (i = 0; i < 600; i++) {
+ if (readw(baseAddr + Magic_no) == Magic_code)
+ break;
+ msleep(10);
+ }
+ if (readw(baseAddr + Magic_no) != Magic_code)
+ return -EIO;
+ }
+ brd->intNdx = baseAddr + IRQindex;
+ brd->intPend = baseAddr + IRQpending;
+ brd->intTable = baseAddr + IRQtable;
+
+ return 0;
+}
+
+static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
+ size_t len)
+{
+ void __iomem *ofsAddr, *baseAddr = brd->basemem;
+ struct moxa_port *port;
+ int retval, i;
+
+ if (len % 2) {
+ printk(KERN_ERR "MOXA: bios length is not even\n");
+ return -EINVAL;
+ }
+
+ retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
+ if (retval)
+ return retval;
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ case MOXA_BOARD_CP204J:
+ port = brd->ports;
+ for (i = 0; i < brd->numPorts; i++, port++) {
+ port->board = brd;
+ port->DCDState = 0;
+ port->tableAddr = baseAddr + Extern_table +
+ Extern_size * i;
+ ofsAddr = port->tableAddr;
+ writew(C218rx_mask, ofsAddr + RX_mask);
+ writew(C218tx_mask, ofsAddr + TX_mask);
+ writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
+
+ writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
+
+ }
+ break;
+ default:
+ port = brd->ports;
+ for (i = 0; i < brd->numPorts; i++, port++) {
+ port->board = brd;
+ port->DCDState = 0;
+ port->tableAddr = baseAddr + Extern_table +
+ Extern_size * i;
+ ofsAddr = port->tableAddr;
+ switch (brd->numPorts) {
+ case 8:
+ writew(C320p8rx_mask, ofsAddr + RX_mask);
+ writew(C320p8tx_mask, ofsAddr + TX_mask);
+ writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
+
+ break;
+ case 16:
+ writew(C320p16rx_mask, ofsAddr + RX_mask);
+ writew(C320p16tx_mask, ofsAddr + TX_mask);
+ writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
+ break;
+
+ case 24:
+ writew(C320p24rx_mask, ofsAddr + RX_mask);
+ writew(C320p24tx_mask, ofsAddr + TX_mask);
+ writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
+ writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
+ writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+ break;
+ case 32:
+ writew(C320p32rx_mask, ofsAddr + RX_mask);
+ writew(C320p32tx_mask, ofsAddr + TX_mask);
+ writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
+ writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
+ writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
+ writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
+ writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+ break;
+ }
+ }
+ break;
+ }
+ return 0;
+}
+
+static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
+{
+ const void *ptr = fw->data;
+ char rsn[64];
+ u16 lens[5];
+ size_t len;
+ unsigned int a, lenp, lencnt;
+ int ret = -EINVAL;
+ struct {
+ __le32 magic; /* 0x34303430 */
+ u8 reserved1[2];
+ u8 type; /* UNIX = 3 */
+ u8 model; /* C218T=1, C320T=2, CP204=3 */
+ u8 reserved2[8];
+ __le16 len[5];
+ } const *hdr = ptr;
+
+ BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
+
+ if (fw->size < MOXA_FW_HDRLEN) {
+ strcpy(rsn, "too short (even header won't fit)");
+ goto err;
+ }
+ if (hdr->magic != cpu_to_le32(0x30343034)) {
+ sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
+ goto err;
+ }
+ if (hdr->type != 3) {
+ sprintf(rsn, "not for linux, type is %u", hdr->type);
+ goto err;
+ }
+ if (moxa_check_fw_model(brd, hdr->model)) {
+ sprintf(rsn, "not for this card, model is %u", hdr->model);
+ goto err;
+ }
+
+ len = MOXA_FW_HDRLEN;
+ lencnt = hdr->model == 2 ? 5 : 3;
+ for (a = 0; a < ARRAY_SIZE(lens); a++) {
+ lens[a] = le16_to_cpu(hdr->len[a]);
+ if (lens[a] && len + lens[a] <= fw->size &&
+ moxa_check_fw(&fw->data[len]))
+ printk(KERN_WARNING "MOXA firmware: unexpected input "
+ "at offset %u, but going on\n", (u32)len);
+ if (!lens[a] && a < lencnt) {
+ sprintf(rsn, "too few entries in fw file");
+ goto err;
+ }
+ len += lens[a];
+ }
+
+ if (len != fw->size) {
+ sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
+ (u32)len);
+ goto err;
+ }
+
+ ptr += MOXA_FW_HDRLEN;
+ lenp = 0; /* bios */
+
+ strcpy(rsn, "read above");
+
+ ret = moxa_load_bios(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+
+ /* we skip the tty section (lens[1]), since we don't need it */
+ ptr += lens[lenp] + lens[lenp + 1];
+ lenp += 2; /* comm */
+
+ if (hdr->model == 2) {
+ ret = moxa_load_320b(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+ /* skip another tty */
+ ptr += lens[lenp] + lens[lenp + 1];
+ lenp += 2;
+ }
+
+ ret = moxa_load_code(brd, ptr, lens[lenp]);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
+ return ret;
+}
+
+static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
+{
+ const struct firmware *fw;
+ const char *file;
+ struct moxa_port *p;
+ unsigned int i, first_idx;
+ int ret;
+
+ brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
+ GFP_KERNEL);
+ if (brd->ports == NULL) {
+ printk(KERN_ERR "cannot allocate memory for ports\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+ tty_port_init(&p->port);
+ p->port.ops = &moxa_port_ops;
+ p->type = PORT_16550A;
+ p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+ }
+
+ switch (brd->boardType) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ file = "c218tunx.cod";
+ break;
+ case MOXA_BOARD_CP204J:
+ file = "cp204unx.cod";
+ break;
+ default:
+ file = "c320tunx.cod";
+ break;
+ }
+
+ ret = request_firmware(&fw, file, dev);
+ if (ret) {
+ printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
+ "you've placed '%s' file into your firmware "
+ "loader directory (e.g. /lib/firmware)\n",
+ file);
+ goto err_free;
+ }
+
+ ret = moxa_load_fw(brd, fw);
+
+ release_firmware(fw);
+
+ if (ret)
+ goto err_free;
+
+ spin_lock_bh(&moxa_lock);
+ brd->ready = 1;
+ if (!timer_pending(&moxaTimer))
+ mod_timer(&moxaTimer, jiffies + HZ / 50);
+ spin_unlock_bh(&moxa_lock);
+
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (i = 0; i < brd->numPorts; i++)
+ tty_port_register_device(&brd->ports[i].port, moxaDriver,
+ first_idx + i, dev);
+
+ return 0;
+err_free:
+ for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
+ tty_port_destroy(&brd->ports[i].port);
+ kfree(brd->ports);
+err:
+ return ret;
+}
+
+static void moxa_board_deinit(struct moxa_board_conf *brd)
+{
+ unsigned int a, opened, first_idx;
+
+ mutex_lock(&moxa_openlock);
+ spin_lock_bh(&moxa_lock);
+ brd->ready = 0;
+ spin_unlock_bh(&moxa_lock);
+
+ /* pci hot-un-plug support */
+ for (a = 0; a < brd->numPorts; a++)
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
+ tty_port_tty_hangup(&brd->ports[a].port, false);
+
+ for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
+ tty_port_destroy(&brd->ports[a].port);
+
+ while (1) {
+ opened = 0;
+ for (a = 0; a < brd->numPorts; a++)
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
+ opened++;
+ mutex_unlock(&moxa_openlock);
+ if (!opened)
+ break;
+ msleep(50);
+ mutex_lock(&moxa_openlock);
+ }
+
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (a = 0; a < brd->numPorts; a++)
+ tty_unregister_device(moxaDriver, first_idx + a);
+
+ iounmap(brd->basemem);
+ brd->basemem = NULL;
+ kfree(brd->ports);
+}
+
+#ifdef CONFIG_PCI
+static int moxa_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct moxa_board_conf *board;
+ unsigned int i;
+ int board_type = ent->driver_data;
+ int retval;
+
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ dev_err(&pdev->dev, "can't enable pci device\n");
+ goto err;
+ }
+
+ for (i = 0; i < MAX_BOARDS; i++)
+ if (moxa_boards[i].basemem == NULL)
+ break;
+
+ retval = -ENODEV;
+ if (i >= MAX_BOARDS) {
+ dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
+ "found. Board is ignored.\n", MAX_BOARDS);
+ goto err;
+ }
+
+ board = &moxa_boards[i];
+
+ retval = pci_request_region(pdev, 2, "moxa-base");
+ if (retval) {
+ dev_err(&pdev->dev, "can't request pci region 2\n");
+ goto err;
+ }
+
+ board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
+ if (board->basemem == NULL) {
+ dev_err(&pdev->dev, "can't remap io space 2\n");
+ retval = -ENOMEM;
+ goto err_reg;
+ }
+
+ board->boardType = board_type;
+ switch (board_type) {
+ case MOXA_BOARD_C218_ISA:
+ case MOXA_BOARD_C218_PCI:
+ board->numPorts = 8;
+ break;
+
+ case MOXA_BOARD_CP204J:
+ board->numPorts = 4;
+ break;
+ default:
+ board->numPorts = 0;
+ break;
+ }
+ board->busType = MOXA_BUS_TYPE_PCI;
+
+ retval = moxa_init_board(board, &pdev->dev);
+ if (retval)
+ goto err_base;
+
+ pci_set_drvdata(pdev, board);
+
+ dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
+ moxa_brdname[board_type - 1], board->numPorts);
+
+ return 0;
+err_base:
+ iounmap(board->basemem);
+ board->basemem = NULL;
+err_reg:
+ pci_release_region(pdev, 2);
+err:
+ return retval;
+}
+
+static void moxa_pci_remove(struct pci_dev *pdev)
+{
+ struct moxa_board_conf *brd = pci_get_drvdata(pdev);
+
+ moxa_board_deinit(brd);
+
+ pci_release_region(pdev, 2);
+}
+
+static struct pci_driver moxa_pci_driver = {
+ .name = "moxa",
+ .id_table = moxa_pcibrds,
+ .probe = moxa_pci_probe,
+ .remove = moxa_pci_remove
+};
+#endif /* CONFIG_PCI */
+
+static int __init moxa_init(void)
+{
+ unsigned int isabrds = 0;
+ int retval = 0;
+ struct moxa_board_conf *brd = moxa_boards;
+ unsigned int i;
+
+ printk(KERN_INFO "MOXA Intellio family driver version %s\n",
+ MOXA_VERSION);
+
+ tty_port_init(&moxa_service_port);
+
+ moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(moxaDriver))
+ return PTR_ERR(moxaDriver);
+
+ moxaDriver->name = "ttyMX";
+ moxaDriver->major = ttymajor;
+ moxaDriver->minor_start = 0;
+ moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
+ moxaDriver->subtype = SERIAL_TYPE_NORMAL;
+ moxaDriver->init_termios = tty_std_termios;
+ moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+ moxaDriver->init_termios.c_ispeed = 9600;
+ moxaDriver->init_termios.c_ospeed = 9600;
+ tty_set_operations(moxaDriver, &moxa_ops);
+ /* Having one more port only for ioctls is ugly */
+ tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
+
+ if (tty_register_driver(moxaDriver)) {
+ printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
+ put_tty_driver(moxaDriver);
+ return -1;
+ }
+
+ /* Find the boards defined from module args. */
+
+ for (i = 0; i < MAX_BOARDS; i++) {
+ if (!baseaddr[i])
+ break;
+ if (type[i] == MOXA_BOARD_C218_ISA ||
+ type[i] == MOXA_BOARD_C320_ISA) {
+ pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
+ isabrds + 1, moxa_brdname[type[i] - 1],
+ baseaddr[i]);
+ brd->boardType = type[i];
+ brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
+ numports[i];
+ brd->busType = MOXA_BUS_TYPE_ISA;
+ brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
+ if (!brd->basemem) {
+ printk(KERN_ERR "MOXA: can't remap %lx\n",
+ baseaddr[i]);
+ continue;
+ }
+ if (moxa_init_board(brd, NULL)) {
+ iounmap(brd->basemem);
+ brd->basemem = NULL;
+ continue;
+ }
+
+ printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
+ "ready (%u ports, firmware loaded)\n",
+ baseaddr[i], brd->numPorts);
+
+ brd++;
+ isabrds++;
+ }
+ }
+
+#ifdef CONFIG_PCI
+ retval = pci_register_driver(&moxa_pci_driver);
+ if (retval) {
+ printk(KERN_ERR "Can't register MOXA pci driver!\n");
+ if (isabrds)
+ retval = 0;
+ }
+#endif
+
+ return retval;
+}
+
+static void __exit moxa_exit(void)
+{
+ unsigned int i;
+
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&moxa_pci_driver);
+#endif
+
+ for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
+ if (moxa_boards[i].ready)
+ moxa_board_deinit(&moxa_boards[i]);
+
+ del_timer_sync(&moxaTimer);
+
+ if (tty_unregister_driver(moxaDriver))
+ printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
+ "serial driver\n");
+ put_tty_driver(moxaDriver);
+}
+
+module_init(moxa_init);
+module_exit(moxa_exit);
+
+static void moxa_shutdown(struct tty_port *port)
+{
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortDisable(ch);
+ MoxaPortFlushData(ch, 2);
+}
+
+static int moxa_carrier_raised(struct tty_port *port)
+{
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ int dcd;
+
+ spin_lock_irq(&port->lock);
+ dcd = ch->DCDState;
+ spin_unlock_irq(&port->lock);
+ return dcd;
+}
+
+static void moxa_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortLineCtrl(ch, onoff, onoff);
+}
+
+
+static int moxa_open(struct tty_struct *tty, struct file *filp)
+{
+ struct moxa_board_conf *brd;
+ struct moxa_port *ch;
+ int port;
+
+ port = tty->index;
+ if (port == MAX_PORTS) {
+ return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
+ }
+ if (mutex_lock_interruptible(&moxa_openlock))
+ return -ERESTARTSYS;
+ brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
+ if (!brd->ready) {
+ mutex_unlock(&moxa_openlock);
+ return -ENODEV;
+ }
+
+ if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+ mutex_unlock(&moxa_openlock);
+ return -ENODEV;
+ }
+
+ ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
+ ch->port.count++;
+ tty->driver_data = ch;
+ tty_port_tty_set(&ch->port, tty);
+ mutex_lock(&ch->port.mutex);
+ if (!(ch->port.flags & ASYNC_INITIALIZED)) {
+ ch->statusflags = 0;
+ moxa_set_tty_param(tty, &tty->termios);
+ MoxaPortLineCtrl(ch, 1, 1);
+ MoxaPortEnable(ch);
+ MoxaSetFifo(ch, ch->type == PORT_16550A);
+ ch->port.flags |= ASYNC_INITIALIZED;
+ }
+ mutex_unlock(&ch->port.mutex);
+ mutex_unlock(&moxa_openlock);
+
+ return tty_port_block_til_ready(&ch->port, tty, filp);
+}
+
+static void moxa_close(struct tty_struct *tty, struct file *filp)
+{
+ struct moxa_port *ch = tty->driver_data;
+ ch->cflag = tty->termios.c_cflag;
+ tty_port_close(&ch->port, tty, filp);
+}
+
+static int moxa_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct moxa_port *ch = tty->driver_data;
+ unsigned long flags;
+ int len;
+
+ if (ch == NULL)
+ return 0;
+
+ spin_lock_irqsave(&moxa_lock, flags);
+ len = MoxaPortWriteData(tty, buf, count);
+ spin_unlock_irqrestore(&moxa_lock, flags);
+
+ set_bit(LOWWAIT, &ch->statusflags);
+ return len;
+}
+
+static int moxa_write_room(struct tty_struct *tty)
+{
+ struct moxa_port *ch;
+
+ if (tty->stopped)
+ return 0;
+ ch = tty->driver_data;
+ if (ch == NULL)
+ return 0;
+ return MoxaPortTxFree(ch);
+}
+
+static void moxa_flush_buffer(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+
+ if (ch == NULL)
+ return;
+ MoxaPortFlushData(ch, 1);
+ tty_wakeup(tty);
+}
+
+static int moxa_chars_in_buffer(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+ int chars;
+
+ chars = MoxaPortTxQueue(ch);
+ if (chars)
+ /*
+ * Make it possible to wakeup anything waiting for output
+ * in tty_ioctl.c, etc.
+ */
+ set_bit(EMPTYWAIT, &ch->statusflags);
+ return chars;
+}
+
+static int moxa_tiocmget(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+ int flag = 0, dtr, rts;
+
+ MoxaPortGetLineOut(ch, &dtr, &rts);
+ if (dtr)
+ flag |= TIOCM_DTR;
+ if (rts)
+ flag |= TIOCM_RTS;
+ dtr = MoxaPortLineStatus(ch);
+ if (dtr & 1)
+ flag |= TIOCM_CTS;
+ if (dtr & 2)
+ flag |= TIOCM_DSR;
+ if (dtr & 4)
+ flag |= TIOCM_CD;
+ return flag;
+}
+
+static int moxa_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct moxa_port *ch;
+ int dtr, rts;
+
+ mutex_lock(&moxa_openlock);
+ ch = tty->driver_data;
+ if (!ch) {
+ mutex_unlock(&moxa_openlock);
+ return -EINVAL;
+ }
+
+ MoxaPortGetLineOut(ch, &dtr, &rts);
+ if (set & TIOCM_RTS)
+ rts = 1;
+ if (set & TIOCM_DTR)
+ dtr = 1;
+ if (clear & TIOCM_RTS)
+ rts = 0;
+ if (clear & TIOCM_DTR)
+ dtr = 0;
+ MoxaPortLineCtrl(ch, dtr, rts);
+ mutex_unlock(&moxa_openlock);
+ return 0;
+}
+
+static void moxa_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
+{
+ struct moxa_port *ch = tty->driver_data;
+
+ if (ch == NULL)
+ return;
+ moxa_set_tty_param(tty, old_termios);
+ if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
+ wake_up_interruptible(&ch->port.open_wait);
+}
+
+static void moxa_stop(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+
+ if (ch == NULL)
+ return;
+ MoxaPortTxDisable(ch);
+ set_bit(TXSTOPPED, &ch->statusflags);
+}
+
+
+static void moxa_start(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+
+ if (ch == NULL)
+ return;
+
+ if (!test_bit(TXSTOPPED, &ch->statusflags))
+ return;
+
+ MoxaPortTxEnable(ch);
+ clear_bit(TXSTOPPED, &ch->statusflags);
+}
+
+static void moxa_hangup(struct tty_struct *tty)
+{
+ struct moxa_port *ch = tty->driver_data;
+ tty_port_hangup(&ch->port);
+}
+
+static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
+{
+ unsigned long flags;
+ dcd = !!dcd;
+
+ spin_lock_irqsave(&p->port.lock, flags);
+ if (dcd != p->DCDState) {
+ p->DCDState = dcd;
+ spin_unlock_irqrestore(&p->port.lock, flags);
+ if (!dcd)
+ tty_port_tty_hangup(&p->port, true);
+ }
+ else
+ spin_unlock_irqrestore(&p->port.lock, flags);
+}
+
+static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
+ u16 __iomem *ip)
+{
+ struct tty_struct *tty = tty_port_tty_get(&p->port);
+ void __iomem *ofsAddr;
+ unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
+ u16 intr;
+
+ if (tty) {
+ if (test_bit(EMPTYWAIT, &p->statusflags) &&
+ MoxaPortTxQueue(p) == 0) {
+ clear_bit(EMPTYWAIT, &p->statusflags);
+ tty_wakeup(tty);
+ }
+ if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
+ MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
+ clear_bit(LOWWAIT, &p->statusflags);
+ tty_wakeup(tty);
+ }
+
+ if (inited && !test_bit(TTY_THROTTLED, &tty->flags) &&
+ MoxaPortRxQueue(p) > 0) { /* RX */
+ MoxaPortReadData(p);
+ tty_schedule_flip(&p->port);
+ }
+ } else {
+ clear_bit(EMPTYWAIT, &p->statusflags);
+ MoxaPortFlushData(p, 0); /* flush RX */
+ }
+
+ if (!handle) /* nothing else to do */
+ goto put;
+
+ intr = readw(ip); /* port irq status */
+ if (intr == 0)
+ goto put;
+
+ writew(0, ip); /* ACK port */
+ ofsAddr = p->tableAddr;
+ if (intr & IntrTx) /* disable tx intr */
+ writew(readw(ofsAddr + HostStat) & ~WakeupTx,
+ ofsAddr + HostStat);
+
+ if (!inited)
+ goto put;
+
+ if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
+ tty_insert_flip_char(&p->port, 0, TTY_BREAK);
+ tty_schedule_flip(&p->port);
+ }
+
+ if (intr & IntrLine)
+ moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
+put:
+ tty_kref_put(tty);
+
+ return 0;
+}
+
+static void moxa_poll(unsigned long ignored)
+{
+ struct moxa_board_conf *brd;
+ u16 __iomem *ip;
+ unsigned int card, port, served = 0;
+
+ spin_lock(&moxa_lock);
+ for (card = 0; card < MAX_BOARDS; card++) {
+ brd = &moxa_boards[card];
+ if (!brd->ready)
+ continue;
+
+ served++;
+
+ ip = NULL;
+ if (readb(brd->intPend) == 0xff)
+ ip = brd->intTable + readb(brd->intNdx);
+
+ for (port = 0; port < brd->numPorts; port++)
+ moxa_poll_port(&brd->ports[port], !!ip, ip + port);
+
+ if (ip)
+ writeb(0, brd->intPend); /* ACK */
+
+ if (moxaLowWaterChk) {
+ struct moxa_port *p = brd->ports;
+ for (port = 0; port < brd->numPorts; port++, p++)
+ if (p->lowChkFlag) {
+ p->lowChkFlag = 0;
+ moxa_low_water_check(p->tableAddr);
+ }
+ }
+ }
+ moxaLowWaterChk = 0;
+
+ if (served)
+ mod_timer(&moxaTimer, jiffies + HZ / 50);
+ spin_unlock(&moxa_lock);
+}
+
+/******************************************************************************/
+
+static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ register struct ktermios *ts = &tty->termios;
+ struct moxa_port *ch = tty->driver_data;
+ int rts, cts, txflow, rxflow, xany, baud;
+
+ rts = cts = txflow = rxflow = xany = 0;
+ if (ts->c_cflag & CRTSCTS)
+ rts = cts = 1;
+ if (ts->c_iflag & IXON)
+ txflow = 1;
+ if (ts->c_iflag & IXOFF)
+ rxflow = 1;
+ if (ts->c_iflag & IXANY)
+ xany = 1;
+
+ /* Clear the features we don't support */
+ ts->c_cflag &= ~CMSPAR;
+ MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
+ baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
+ if (baud == -1)
+ baud = tty_termios_baud_rate(old_termios);
+ /* Not put the baud rate into the termios data */
+ tty_encode_baud_rate(tty, baud, baud);
+}
+
+/*****************************************************************************
+ * Driver level functions: *
+ *****************************************************************************/
+
+static void MoxaPortFlushData(struct moxa_port *port, int mode)
+{
+ void __iomem *ofsAddr;
+ if (mode < 0 || mode > 2)
+ return;
+ ofsAddr = port->tableAddr;
+ moxafunc(ofsAddr, FC_FlushQueue, mode);
+ if (mode != 1) {
+ port->lowChkFlag = 0;
+ moxa_low_water_check(ofsAddr);
+ }
+}
+
+/*
+ * Moxa Port Number Description:
+ *
+ * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
+ * the port number using in MOXA driver functions will be 0 to 31 for
+ * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
+ * to 127 for fourth. For example, if you setup three MOXA boards,
+ * first board is C218, second board is C320-16 and third board is
+ * C320-32. The port number of first board (C218 - 8 ports) is from
+ * 0 to 7. The port number of second board (C320 - 16 ports) is form
+ * 32 to 47. The port number of third board (C320 - 32 ports) is from
+ * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
+ * 127 will be invalid.
+ *
+ *
+ * Moxa Functions Description:
+ *
+ * Function 1: Driver initialization routine, this routine must be
+ * called when initialized driver.
+ * Syntax:
+ * void MoxaDriverInit();
+ *
+ *
+ * Function 2: Moxa driver private IOCTL command processing.
+ * Syntax:
+ * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
+ *
+ * unsigned int cmd : IOCTL command
+ * unsigned long arg : IOCTL argument
+ * int port : port number (0 - 127)
+ *
+ * return: 0 (OK)
+ * -EINVAL
+ * -ENOIOCTLCMD
+ *
+ *
+ * Function 6: Enable this port to start Tx/Rx data.
+ * Syntax:
+ * void MoxaPortEnable(int port);
+ * int port : port number (0 - 127)
+ *
+ *
+ * Function 7: Disable this port
+ * Syntax:
+ * void MoxaPortDisable(int port);
+ * int port : port number (0 - 127)
+ *
+ *
+ * Function 10: Setting baud rate of this port.
+ * Syntax:
+ * speed_t MoxaPortSetBaud(int port, speed_t baud);
+ * int port : port number (0 - 127)
+ * long baud : baud rate (50 - 115200)
+ *
+ * return: 0 : this port is invalid or baud < 50
+ * 50 - 115200 : the real baud rate set to the port, if
+ * the argument baud is large than maximun
+ * available baud rate, the real setting
+ * baud rate will be the maximun baud rate.
+ *
+ *
+ * Function 12: Configure the port.
+ * Syntax:
+ * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
+ * int port : port number (0 - 127)
+ * struct ktermios * termio : termio structure pointer
+ * speed_t baud : baud rate
+ *
+ * return: -1 : this port is invalid or termio == NULL
+ * 0 : setting O.K.
+ *
+ *
+ * Function 13: Get the DTR/RTS state of this port.
+ * Syntax:
+ * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
+ * int port : port number (0 - 127)
+ * int * dtrState : pointer to INT to receive the current DTR
+ * state. (if NULL, this function will not
+ * write to this address)
+ * int * rtsState : pointer to INT to receive the current RTS
+ * state. (if NULL, this function will not
+ * write to this address)
+ *
+ * return: -1 : this port is invalid
+ * 0 : O.K.
+ *
+ *
+ * Function 14: Setting the DTR/RTS output state of this port.
+ * Syntax:
+ * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
+ * int port : port number (0 - 127)
+ * int dtrState : DTR output state (0: off, 1: on)
+ * int rtsState : RTS output state (0: off, 1: on)
+ *
+ *
+ * Function 15: Setting the flow control of this port.
+ * Syntax:
+ * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
+ * int txFlow,int xany);
+ * int port : port number (0 - 127)
+ * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
+ * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
+ * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
+ * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
+ * int xany : S/W XANY flow control (0: no, 1: yes)
+ *
+ *
+ * Function 16: Get ths line status of this port
+ * Syntax:
+ * int MoxaPortLineStatus(int port);
+ * int port : port number (0 - 127)
+ *
+ * return: Bit 0 - CTS state (0: off, 1: on)
+ * Bit 1 - DSR state (0: off, 1: on)
+ * Bit 2 - DCD state (0: off, 1: on)
+ *
+ *
+ * Function 19: Flush the Rx/Tx buffer data of this port.
+ * Syntax:
+ * void MoxaPortFlushData(int port, int mode);
+ * int port : port number (0 - 127)
+ * int mode
+ * 0 : flush the Rx buffer
+ * 1 : flush the Tx buffer
+ * 2 : flush the Rx and Tx buffer
+ *
+ *
+ * Function 20: Write data.
+ * Syntax:
+ * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
+ * int port : port number (0 - 127)
+ * unsigned char * buffer : pointer to write data buffer.
+ * int length : write data length
+ *
+ * return: 0 - length : real write data length
+ *
+ *
+ * Function 21: Read data.
+ * Syntax:
+ * int MoxaPortReadData(int port, struct tty_struct *tty);
+ * int port : port number (0 - 127)
+ * struct tty_struct *tty : tty for data
+ *
+ * return: 0 - length : real read data length
+ *
+ *
+ * Function 24: Get the Tx buffer current queued data bytes
+ * Syntax:
+ * int MoxaPortTxQueue(int port);
+ * int port : port number (0 - 127)
+ *
+ * return: .. : Tx buffer current queued data bytes
+ *
+ *
+ * Function 25: Get the Tx buffer current free space
+ * Syntax:
+ * int MoxaPortTxFree(int port);
+ * int port : port number (0 - 127)
+ *
+ * return: .. : Tx buffer current free space
+ *
+ *
+ * Function 26: Get the Rx buffer current queued data bytes
+ * Syntax:
+ * int MoxaPortRxQueue(int port);
+ * int port : port number (0 - 127)
+ *
+ * return: .. : Rx buffer current queued data bytes
+ *
+ *
+ * Function 28: Disable port data transmission.
+ * Syntax:
+ * void MoxaPortTxDisable(int port);
+ * int port : port number (0 - 127)
+ *
+ *
+ * Function 29: Enable port data transmission.
+ * Syntax:
+ * void MoxaPortTxEnable(int port);
+ * int port : port number (0 - 127)
+ *
+ *
+ * Function 31: Get the received BREAK signal count and reset it.
+ * Syntax:
+ * int MoxaPortResetBrkCnt(int port);
+ * int port : port number (0 - 127)
+ *
+ * return: 0 - .. : BREAK signal count
+ *
+ *
+ */
+
+static void MoxaPortEnable(struct moxa_port *port)
+{
+ void __iomem *ofsAddr;
+ u16 lowwater = 512;
+
+ ofsAddr = port->tableAddr;
+ writew(lowwater, ofsAddr + Low_water);
+ if (MOXA_IS_320(port->board))
+ moxafunc(ofsAddr, FC_SetBreakIrq, 0);
+ else
+ writew(readw(ofsAddr + HostStat) | WakeupBreak,
+ ofsAddr + HostStat);
+
+ moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
+ moxafunc(ofsAddr, FC_FlushQueue, 2);
+
+ moxafunc(ofsAddr, FC_EnableCH, Magic_code);
+ MoxaPortLineStatus(port);
+}
+
+static void MoxaPortDisable(struct moxa_port *port)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+
+ moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
+ moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
+ writew(0, ofsAddr + HostStat);
+ moxafunc(ofsAddr, FC_DisableCH, Magic_code);
+}
+
+static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+ unsigned int clock, val;
+ speed_t max;
+
+ max = MOXA_IS_320(port->board) ? 460800 : 921600;
+ if (baud < 50)
+ return 0;
+ if (baud > max)
+ baud = max;
+ clock = 921600;
+ val = clock / baud;
+ moxafunc(ofsAddr, FC_SetBaud, val);
+ baud = clock / val;
+ return baud;
+}
+
+static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
+ speed_t baud)
+{
+ void __iomem *ofsAddr;
+ tcflag_t mode = 0;
+
+ ofsAddr = port->tableAddr;
+
+ mode = termio->c_cflag & CSIZE;
+ if (mode == CS5)
+ mode = MX_CS5;
+ else if (mode == CS6)
+ mode = MX_CS6;
+ else if (mode == CS7)
+ mode = MX_CS7;
+ else if (mode == CS8)
+ mode = MX_CS8;
+
+ if (termio->c_cflag & CSTOPB) {
+ if (mode == MX_CS5)
+ mode |= MX_STOP15;
+ else
+ mode |= MX_STOP2;
+ } else
+ mode |= MX_STOP1;
+
+ if (termio->c_cflag & PARENB) {
+ if (termio->c_cflag & PARODD)
+ mode |= MX_PARODD;
+ else
+ mode |= MX_PAREVEN;
+ } else
+ mode |= MX_PARNONE;
+
+ moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
+
+ if (MOXA_IS_320(port->board) && baud >= 921600)
+ return -1;
+
+ baud = MoxaPortSetBaud(port, baud);
+
+ if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
+ spin_lock_irq(&moxafunc_lock);
+ writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
+ writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
+ writeb(FC_SetXonXoff, ofsAddr + FuncCode);
+ moxa_wait_finish(ofsAddr);
+ spin_unlock_irq(&moxafunc_lock);
+
+ }
+ return baud;
+}
+
+static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
+ int *rtsState)
+{
+ if (dtrState)
+ *dtrState = !!(port->lineCtrl & DTR_ON);
+ if (rtsState)
+ *rtsState = !!(port->lineCtrl & RTS_ON);
+
+ return 0;
+}
+
+static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
+{
+ u8 mode = 0;
+
+ if (dtr)
+ mode |= DTR_ON;
+ if (rts)
+ mode |= RTS_ON;
+ port->lineCtrl = mode;
+ moxafunc(port->tableAddr, FC_LineControl, mode);
+}
+
+static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
+ int txflow, int rxflow, int txany)
+{
+ int mode = 0;
+
+ if (rts)
+ mode |= RTS_FlowCtl;
+ if (cts)
+ mode |= CTS_FlowCtl;
+ if (txflow)
+ mode |= Tx_FlowCtl;
+ if (rxflow)
+ mode |= Rx_FlowCtl;
+ if (txany)
+ mode |= IXM_IXANY;
+ moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
+}
+
+static int MoxaPortLineStatus(struct moxa_port *port)
+{
+ void __iomem *ofsAddr;
+ int val;
+
+ ofsAddr = port->tableAddr;
+ if (MOXA_IS_320(port->board))
+ val = moxafuncret(ofsAddr, FC_LineStatus, 0);
+ else
+ val = readw(ofsAddr + FlagStat) >> 4;
+ val &= 0x0B;
+ if (val & 8)
+ val |= 4;
+ moxa_new_dcdstate(port, val & 8);
+ val &= 7;
+ return val;
+}
+
+static int MoxaPortWriteData(struct tty_struct *tty,
+ const unsigned char *buffer, int len)
+{
+ struct moxa_port *port = tty->driver_data;
+ void __iomem *baseAddr, *ofsAddr, *ofs;
+ unsigned int c, total;
+ u16 head, tail, tx_mask, spage, epage;
+ u16 pageno, pageofs, bufhead;
+
+ ofsAddr = port->tableAddr;
+ baseAddr = port->board->basemem;
+ tx_mask = readw(ofsAddr + TX_mask);
+ spage = readw(ofsAddr + Page_txb);
+ epage = readw(ofsAddr + EndPage_txb);
+ tail = readw(ofsAddr + TXwptr);
+ head = readw(ofsAddr + TXrptr);
+ c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
+ if (c > len)
+ c = len;
+ moxaLog.txcnt[port->port.tty->index] += c;
+ total = c;
+ if (spage == epage) {
+ bufhead = readw(ofsAddr + Ofs_txb);
+ writew(spage, baseAddr + Control_reg);
+ while (c > 0) {
+ if (head > tail)
+ len = head - tail - 1;
+ else
+ len = tx_mask + 1 - tail;
+ len = (c > len) ? len : c;
+ ofs = baseAddr + DynPage_addr + bufhead + tail;
+ memcpy_toio(ofs, buffer, len);
+ buffer += len;
+ tail = (tail + len) & tx_mask;
+ c -= len;
+ }
+ } else {
+ pageno = spage + (tail >> 13);
+ pageofs = tail & Page_mask;
+ while (c > 0) {
+ len = Page_size - pageofs;
+ if (len > c)
+ len = c;
+ writeb(pageno, baseAddr + Control_reg);
+ ofs = baseAddr + DynPage_addr + pageofs;
+ memcpy_toio(ofs, buffer, len);
+ buffer += len;
+ if (++pageno == epage)
+ pageno = spage;
+ pageofs = 0;
+ c -= len;
+ }
+ tail = (tail + total) & tx_mask;
+ }
+ writew(tail, ofsAddr + TXwptr);
+ writeb(1, ofsAddr + CD180TXirq); /* start to send */
+ return total;
+}
+
+static int MoxaPortReadData(struct moxa_port *port)
+{
+ struct tty_struct *tty = port->port.tty;
+ unsigned char *dst;
+ void __iomem *baseAddr, *ofsAddr, *ofs;
+ unsigned int count, len, total;
+ u16 tail, rx_mask, spage, epage;
+ u16 pageno, pageofs, bufhead, head;
+
+ ofsAddr = port->tableAddr;
+ baseAddr = port->board->basemem;
+ head = readw(ofsAddr + RXrptr);
+ tail = readw(ofsAddr + RXwptr);
+ rx_mask = readw(ofsAddr + RX_mask);
+ spage = readw(ofsAddr + Page_rxb);
+ epage = readw(ofsAddr + EndPage_rxb);
+ count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
+ if (count == 0)
+ return 0;
+
+ total = count;
+ moxaLog.rxcnt[tty->index] += total;
+ if (spage == epage) {
+ bufhead = readw(ofsAddr + Ofs_rxb);
+ writew(spage, baseAddr + Control_reg);
+ while (count > 0) {
+ ofs = baseAddr + DynPage_addr + bufhead + head;
+ len = (tail >= head) ? (tail - head) :
+ (rx_mask + 1 - head);
+ len = tty_prepare_flip_string(&port->port, &dst,
+ min(len, count));
+ memcpy_fromio(dst, ofs, len);
+ head = (head + len) & rx_mask;
+ count -= len;
+ }
+ } else {
+ pageno = spage + (head >> 13);
+ pageofs = head & Page_mask;
+ while (count > 0) {
+ writew(pageno, baseAddr + Control_reg);
+ ofs = baseAddr + DynPage_addr + pageofs;
+ len = tty_prepare_flip_string(&port->port, &dst,
+ min(Page_size - pageofs, count));
+ memcpy_fromio(dst, ofs, len);
+
+ count -= len;
+ pageofs = (pageofs + len) & Page_mask;
+ if (pageofs == 0 && ++pageno == epage)
+ pageno = spage;
+ }
+ head = (head + total) & rx_mask;
+ }
+ writew(head, ofsAddr + RXrptr);
+ if (readb(ofsAddr + FlagStat) & Xoff_state) {
+ moxaLowWaterChk = 1;
+ port->lowChkFlag = 1;
+ }
+ return total;
+}
+
+
+static int MoxaPortTxQueue(struct moxa_port *port)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
+
+ rptr = readw(ofsAddr + TXrptr);
+ wptr = readw(ofsAddr + TXwptr);
+ mask = readw(ofsAddr + TX_mask);
+ return (wptr - rptr) & mask;
+}
+
+static int MoxaPortTxFree(struct moxa_port *port)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
+
+ rptr = readw(ofsAddr + TXrptr);
+ wptr = readw(ofsAddr + TXwptr);
+ mask = readw(ofsAddr + TX_mask);
+ return mask - ((wptr - rptr) & mask);
+}
+
+static int MoxaPortRxQueue(struct moxa_port *port)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+ u16 rptr, wptr, mask;
+
+ rptr = readw(ofsAddr + RXrptr);
+ wptr = readw(ofsAddr + RXwptr);
+ mask = readw(ofsAddr + RX_mask);
+ return (wptr - rptr) & mask;
+}
+
+static void MoxaPortTxDisable(struct moxa_port *port)
+{
+ moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
+}
+
+static void MoxaPortTxEnable(struct moxa_port *port)
+{
+ moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
+}
+
+static int moxa_get_serial_info(struct moxa_port *info,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp = {
+ .type = info->type,
+ .line = info->port.tty->index,
+ .flags = info->port.flags,
+ .baud_base = 921600,
+ .close_delay = info->port.close_delay
+ };
+ return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
+}
+
+
+static int moxa_set_serial_info(struct moxa_port *info,
+ struct serial_struct __user *new_info)
+{
+ struct serial_struct new_serial;
+
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
+
+ if (new_serial.irq != 0 || new_serial.port != 0 ||
+ new_serial.custom_divisor != 0 ||
+ new_serial.baud_base != 921600)
+ return -EPERM;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if (((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (info->port.flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ } else
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
+
+ new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
+ new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
+
+ MoxaSetFifo(info, new_serial.type == PORT_16550A);
+
+ info->type = new_serial.type;
+ return 0;
+}
+
+
+
+/*****************************************************************************
+ * Static local functions: *
+ *****************************************************************************/
+
+static void MoxaSetFifo(struct moxa_port *port, int enable)
+{
+ void __iomem *ofsAddr = port->tableAddr;
+
+ if (!enable) {
+ moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
+ moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
+ } else {
+ moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
+ moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
+ }
+}
Code Review / kvmfornfv.git / blobdiff