+++ /dev/null
-/* Copyright (C) 2010 - 2013 UNISYS CORPORATION
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- */
-
-#ifndef __VBUSDEVICEINFO_H__
-#define __VBUSDEVICEINFO_H__
-
-#include <linux/types.h>
-
-#pragma pack(push, 1) /* both GCC and VC now allow this pragma */
-
-/* An array of this struct is present in the channel area for each vbus.
- * (See vbuschannel.h.)
- * It is filled in by the client side to provide info about the device
- * and driver from the client's perspective.
- */
-struct ultra_vbus_deviceinfo {
- u8 devtype[16]; /* short string identifying the device type */
- u8 drvname[16]; /* driver .sys file name */
- u8 infostrs[96]; /* sequence of tab-delimited id strings: */
- /* <DRIVER_REV> <DRIVER_VERTAG> <DRIVER_COMPILETIME> */
- u8 reserved[128]; /* pad size to 256 bytes */
-};
-
-#pragma pack(pop)
-
-/* Reads chars from the buffer at <src> for <srcmax> bytes, and writes to
- * the buffer at <p>, which is <remain> bytes long, ensuring never to
- * overflow the buffer at <p>, using the following rules:
- * - printable characters are simply copied from the buffer at <src> to the
- * buffer at <p>
- * - intervening streaks of non-printable characters in the buffer at <src>
- * are replaced with a single space in the buffer at <p>
- * Note that we pay no attention to '\0'-termination.
- * Returns the number of bytes written to <p>.
- *
- * Pass <p> == NULL and <remain> == 0 for this special behavior. In this
- * case, we simply return the number of bytes that WOULD HAVE been written
- * to a buffer at <p>, had it been infinitely big.
- */
-static inline int
-vbuschannel_sanitize_buffer(char *p, int remain, char *src, int srcmax)
-{
- int chars = 0;
- int nonprintable_streak = 0;
-
- while (srcmax > 0) {
- if ((*src >= ' ') && (*src < 0x7f)) {
- if (nonprintable_streak) {
- if (remain > 0) {
- *p = ' ';
- p++;
- remain--;
- chars++;
- } else if (p == NULL) {
- chars++;
- }
- nonprintable_streak = 0;
- }
- if (remain > 0) {
- *p = *src;
- p++;
- remain--;
- chars++;
- } else if (p == NULL) {
- chars++;
- }
- } else {
- nonprintable_streak = 1;
- }
- src++;
- srcmax--;
- }
- return chars;
-}
-
-#define VBUSCHANNEL_ADDACHAR(ch, p, remain, chars) \
- do { \
- if (remain <= 0) \
- break; \
- *p = ch; \
- p++; chars++; remain--; \
- } while (0)
-
-/* Converts the non-negative value at <num> to an ascii decimal string
- * at <p>, writing at most <remain> bytes. Note there is NO '\0' termination
- * written to <p>.
- *
- * Returns the number of bytes written to <p>.
- *
- * Note that we create this function because we need to do this operation in
- * an environment-independent way (since we are in a common header file).
- */
-static inline int
-vbuschannel_itoa(char *p, int remain, int num)
-{
- int digits = 0;
- char s[32];
- int i;
-
- if (num == 0) {
- /* '0' is a special case */
- if (remain <= 0)
- return 0;
- *p = '0';
- return 1;
- }
- /* form a backwards decimal ascii string in <s> */
- while (num > 0) {
- if (digits >= (int)sizeof(s))
- return 0;
- s[digits++] = (num % 10) + '0';
- num = num / 10;
- }
- if (remain < digits) {
- /* not enough room left at <p> to hold number, so fill with
- * '?' */
- for (i = 0; i < remain; i++, p++)
- *p = '?';
- return remain;
- }
- /* plug in the decimal ascii string representing the number, by */
- /* reversing the string we just built in <s> */
- i = digits;
- while (i > 0) {
- i--;
- *p = s[i];
- p++;
- }
- return digits;
-}
-
-/* Reads <devInfo>, and converts its contents to a printable string at <p>,
- * writing at most <remain> bytes. Note there is NO '\0' termination
- * written to <p>.
- *
- * Pass <devix> >= 0 if you want a device index presented.
- *
- * Returns the number of bytes written to <p>.
- */
-static inline int
-vbuschannel_devinfo_to_string(struct ultra_vbus_deviceinfo *devinfo,
- char *p, int remain, int devix)
-{
- char *psrc;
- int nsrc, x, i, pad;
- int chars = 0;
-
- psrc = &devinfo->devtype[0];
- nsrc = sizeof(devinfo->devtype);
- if (vbuschannel_sanitize_buffer(NULL, 0, psrc, nsrc) <= 0)
- return 0;
-
- /* emit device index */
- if (devix >= 0) {
- VBUSCHANNEL_ADDACHAR('[', p, remain, chars);
- x = vbuschannel_itoa(p, remain, devix);
- p += x;
- remain -= x;
- chars += x;
- VBUSCHANNEL_ADDACHAR(']', p, remain, chars);
- } else {
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
- }
-
- /* emit device type */
- x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
- p += x;
- remain -= x;
- chars += x;
- pad = 15 - x; /* pad device type to be exactly 15 chars */
- for (i = 0; i < pad; i++)
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-
- /* emit driver name */
- psrc = &devinfo->drvname[0];
- nsrc = sizeof(devinfo->drvname);
- x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
- p += x;
- remain -= x;
- chars += x;
- pad = 15 - x; /* pad driver name to be exactly 15 chars */
- for (i = 0; i < pad; i++)
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
- VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-
- /* emit strings */
- psrc = &devinfo->infostrs[0];
- nsrc = sizeof(devinfo->infostrs);
- x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
- p += x;
- remain -= x;
- chars += x;
- VBUSCHANNEL_ADDACHAR('\n', p, remain, chars);
-
- return chars;
-}
-
-#endif
Code Review / kvmfornfv.git / blobdiff