Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / staging / rtl8723au / include / drv_types.h
diff --git a/kernel/drivers/staging/rtl8723au/include/drv_types.h b/kernel/drivers/staging/rtl8723au/include/drv_types.h
new file mode 100644 (file)
index 0000000..e83463a
--- /dev/null
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ ******************************************************************************/
+/*-----------------------------------------------------------------------------
+
+       For type defines and data structure defines
+
+------------------------------------------------------------------------------*/
+
+
+#ifndef __DRV_TYPES_H__
+#define __DRV_TYPES_H__
+
+#include <osdep_service.h>
+#include <wlan_bssdef.h>
+
+
+enum _NIC_VERSION {
+       RTL8711_NIC,
+       RTL8712_NIC,
+       RTL8713_NIC,
+       RTL8716_NIC
+
+};
+
+
+#include <rtw_ht.h>
+
+#include <rtw_cmd.h>
+#include <rtw_xmit.h>
+#include <rtw_recv.h>
+#include <hal_intf.h>
+#include <hal_com.h>
+#include <rtw_security.h>
+#include <rtw_pwrctrl.h>
+#include <rtw_io.h>
+#include <rtw_eeprom.h>
+#include <sta_info.h>
+#include <rtw_mlme.h>
+#include <rtw_debug.h>
+#include <rtw_rf.h>
+#include <rtw_event.h>
+#include <rtw_mlme_ext.h>
+#include <rtw_ap.h>
+
+#include "ioctl_cfg80211.h"
+
+struct registry_priv {
+       u8      chip_version;
+       u8      rfintfs;
+       struct  cfg80211_ssid ssid;
+       u8      channel;/* ad-hoc support requirement */
+       u8      wireless_mode;/* A, B, G, auto */
+       u8      scan_mode;/* active, passive */
+       u8      preamble;/* long, short, auto */
+       u8      vrtl_carrier_sense;/* Enable, Disable, Auto */
+       u8      vcs_type;/* RTS/CTS, CTS-to-self */
+       u16     rts_thresh;
+       u16  frag_thresh;
+       u8      adhoc_tx_pwr;
+       u8      soft_ap;
+       u8      power_mgnt;
+       u8      ips_mode;
+       u8      smart_ps;
+       u8      long_retry_lmt;
+       u8      short_retry_lmt;
+       u16     busy_thresh;
+       u8      ack_policy;
+       u8      software_encrypt;
+       u8      software_decrypt;
+       u8      acm_method;
+         /* UAPSD */
+       u8      wmm_enable;
+       u8      uapsd_enable;
+
+       struct wlan_bssid_ex    dev_network;
+
+       u8      ht_enable;
+       u8      cbw40_enable;
+       u8      ampdu_enable;/* for tx */
+       u8      rx_stbc;
+       u8      ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
+       u8      lowrate_two_xmit;
+
+       u8      rf_config;
+       u8      low_power;
+
+       u8      wifi_spec;/*  !turbo_mode */
+
+       u8      channel_plan;
+#ifdef CONFIG_8723AU_BT_COEXIST
+       u8      btcoex;
+       u8      bt_iso;
+       u8      bt_sco;
+       u8      bt_ampdu;
+#endif
+       bool    bAcceptAddbaReq;
+
+       u8      antdiv_cfg;
+       u8      antdiv_type;
+
+       u8      hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
+       u8      hwpwrp_detect;/* 0:disable,1:enable */
+
+       u8      hw_wps_pbc;/* 0:disable,1:enable */
+
+       u8      max_roaming_times; /* max number driver will try to roaming */
+
+       u8 enable80211d;
+
+       u8 ifname[16];
+       u8 if2name[16];
+
+       u8 notch_filter;
+
+       u8 regulatory_tid;
+};
+
+
+#define MAX_CONTINUAL_URB_ERR 4
+
+#define GET_PRIMARY_ADAPTER(padapter)                                  \
+       (((struct rtw_adapter *)padapter)->dvobj->if1)
+
+enum _IFACE_ID {
+       IFACE_ID0, /* maping to PRIMARY_ADAPTER */
+       IFACE_ID1, /* maping to SECONDARY_ADAPTER */
+       IFACE_ID2,
+       IFACE_ID3,
+       IFACE_ID_MAX,
+};
+
+struct dvobj_priv {
+       struct rtw_adapter *if1; /* PRIMARY_ADAPTER */
+       struct rtw_adapter *if2; /* SECONDARY_ADAPTER */
+
+       /* for local/global synchronization */
+       struct mutex hw_init_mutex;
+       struct mutex h2c_fwcmd_mutex;
+       struct mutex setch_mutex;
+       struct mutex setbw_mutex;
+
+       unsigned char   oper_channel; /* saved chan info when set chan bw */
+       unsigned char   oper_bwmode;
+       unsigned char   oper_ch_offset;/* PRIME_CHNL_OFFSET */
+
+       struct rtw_adapter *padapters[IFACE_ID_MAX];
+       u8 iface_nums; /*  total number of ifaces used runtime */
+
+       /* For 92D, DMDP have 2 interface. */
+       u8      InterfaceNumber;
+       u8      NumInterfaces;
+
+       /* In /Out Pipe information */
+       int     RtInPipe[2];
+       int     RtOutPipe[3];
+       u8      Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
+
+/*-------- below is for USB INTERFACE --------*/
+
+       u8      nr_endpoint;
+       u8      ishighspeed;
+       u8      RtNumInPipes;
+       u8      RtNumOutPipes;
+       int     ep_num[5]; /* endpoint number */
+
+       struct mutex usb_vendor_req_mutex;
+
+       union {
+               __le32 val32;
+               __le16 val16;
+               u8 val8;
+       } usb_buf;
+
+       struct usb_interface *pusbintf;
+       struct usb_device *pusbdev;
+       atomic_t continual_urb_error;
+
+/*-------- below is for PCIE INTERFACE --------*/
+
+};
+
+static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
+{
+       /* todo: get interface type from dvobj and the return the dev accordingly */
+       return &dvobj->pusbintf->dev;
+}
+
+enum _IFACE_TYPE {
+       IFACE_PORT0, /* mapping to port0 for C/D series chips */
+       IFACE_PORT1, /* mapping to port1 for C/D series chip */
+       MAX_IFACE_PORT,
+};
+
+enum _ADAPTER_TYPE {
+       PRIMARY_ADAPTER,
+       SECONDARY_ADAPTER,
+       MAX_ADAPTER,
+};
+
+struct rtw_adapter {
+       int     pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
+       int     bDongle;/* build-in module or external dongle */
+       u16     chip_type;
+       u16     HardwareType;
+
+       struct dvobj_priv *dvobj;
+       struct  mlme_priv mlmepriv;
+       struct  mlme_ext_priv mlmeextpriv;
+       struct  cmd_priv        cmdpriv;
+       struct  evt_priv        evtpriv;
+       struct  xmit_priv       xmitpriv;
+       struct  recv_priv       recvpriv;
+       struct  sta_priv        stapriv;
+       struct  security_priv   securitypriv;
+       struct  registry_priv   registrypriv;
+       struct  pwrctrl_priv    pwrctrlpriv;
+       struct  eeprom_priv eeprompriv;
+
+       u32     setband;
+
+       void *HalData;
+
+       s32     bDriverStopped;
+       s32     bSurpriseRemoved;
+       s32  bCardDisableWOHSM;
+
+       u32     IsrContent;
+       u32     ImrContent;
+
+       u8      EepromAddressSize;
+       u8      hw_init_completed;
+       u8      bDriverIsGoingToUnload;
+       u8      init_adpt_in_progress;
+       u8      bHaltInProgress;
+
+       struct net_device *pnetdev;
+
+       /*  used by rtw_rereg_nd_name related function */
+       int bup;
+       struct net_device_stats stats;
+
+       struct wireless_dev *rtw_wdev;
+       int net_closed;
+
+       u8 bFWReady;
+       u8 bReadPortCancel;
+       u8 bWritePortCancel;
+
+       /* extend to support multi interface */
+       /* IFACE_ID0 is equals to PRIMARY_ADAPTER */
+       /* IFACE_ID1 is equals to SECONDARY_ADAPTER */
+       u8 iface_id;
+};
+
+#define adapter_to_dvobj(adapter) (adapter->dvobj)
+
+static inline u8 *myid(struct eeprom_priv *peepriv)
+{
+       return peepriv->mac_addr;
+}
+
+#endif /* __DRV_TYPES_H__ */