Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / staging / rtl8712 / drv_types.h
diff --git a/kernel/drivers/staging/rtl8712/drv_types.h b/kernel/drivers/staging/rtl8712/drv_types.h
new file mode 100644 (file)
index 0000000..e62543d
--- /dev/null
@@ -0,0 +1,193 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Modifications for inclusion into the Linux staging tree are
+ * Copyright(c) 2010 Larry Finger. All rights reserved.
+ *
+ * Contact information:
+ * WLAN FAE <wlanfae@realtek.com>
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+/*---------------------------------------------------------------------
+
+       For type defines and data structure defines
+
+-----------------------------------------------------------------------*/
+#ifndef __DRV_TYPES_H__
+#define __DRV_TYPES_H__
+
+struct _adapter;
+
+#include "osdep_service.h"
+#include "wlan_bssdef.h"
+#include "rtl8712_spec.h"
+#include "rtl8712_hal.h"
+#include <linux/mutex.h>
+#include <linux/completion.h>
+
+enum _NIC_VERSION {
+       RTL8711_NIC,
+       RTL8712_NIC,
+       RTL8713_NIC,
+       RTL8716_NIC
+};
+
+struct _adapter;
+
+struct qos_priv        {
+       /* bit mask option: u-apsd, s-apsd, ts, block ack... */
+       unsigned int qos_option;
+};
+
+#include "rtl871x_ht.h"
+#include "rtl871x_cmd.h"
+#include "rtl871x_xmit.h"
+#include "rtl871x_recv.h"
+#include "rtl871x_security.h"
+#include "rtl871x_pwrctrl.h"
+#include "rtl871x_io.h"
+#include "rtl871x_eeprom.h"
+#include "sta_info.h"
+#include "rtl871x_mlme.h"
+#include "rtl871x_mp.h"
+#include "rtl871x_debug.h"
+#include "rtl871x_rf.h"
+#include "rtl871x_event.h"
+#include "rtl871x_led.h"
+
+#define SPEC_DEV_ID_DISABLE_HT BIT(1)
+
+struct specific_device_id {
+       u32             flags;
+       u16             idVendor;
+       u16             idProduct;
+
+};
+
+struct registry_priv {
+       u8      chip_version;
+       u8      rfintfs;
+       u8      lbkmode;
+       u8      hci;
+       u8      network_mode;   /*infra, ad-hoc, auto*/
+       struct ndis_802_11_ssid ssid;
+       u8      channel;/* ad-hoc support requirement */
+       u8      wireless_mode;/* A, B, G, auto */
+       u8      vrtl_carrier_sense; /*Enable, Disable, Auto*/
+       u8      vcs_type;/*RTS/CTS, CTS-to-self*/
+       u16     rts_thresh;
+       u16  frag_thresh;
+       u8      preamble;/*long, short, auto*/
+       u8  scan_mode;/*active, passive*/
+       u8  adhoc_tx_pwr;
+       u8  soft_ap;
+       u8  smart_ps;
+       u8 power_mgnt;
+       u8 radio_enable;
+       u8 long_retry_lmt;
+       u8 short_retry_lmt;
+       u16 busy_thresh;
+       u8 ack_policy;
+       u8 mp_mode;
+       u8 software_encrypt;
+       u8 software_decrypt;
+       /* UAPSD */
+       u8 wmm_enable;
+       u8 uapsd_enable;
+       u8 uapsd_max_sp;
+       u8 uapsd_acbk_en;
+       u8 uapsd_acbe_en;
+       u8 uapsd_acvi_en;
+       u8 uapsd_acvo_en;
+
+       struct wlan_bssid_ex dev_network;
+
+       u8 ht_enable;
+       u8 cbw40_enable;
+       u8 ampdu_enable;/*for tx*/
+       u8 rf_config;
+       u8 low_power;
+       u8 wifi_test;
+};
+
+struct dvobj_priv {
+       struct _adapter *padapter;
+       u32 nr_endpoint;
+       u8   ishighspeed;
+       uint (*inirp_init)(struct _adapter *adapter);
+       uint (*inirp_deinit)(struct _adapter *adapter);
+       struct usb_device *pusbdev;
+};
+
+/**
+ * struct _adapter - the main adapter structure for this device.
+ *
+ * bup: True indicates that the interface is up.
+ */
+struct _adapter {
+       struct  dvobj_priv dvobjpriv;
+       struct  mlme_priv mlmepriv;
+       struct  cmd_priv        cmdpriv;
+       struct  evt_priv        evtpriv;
+       struct  io_queue        *pio_queue;
+       struct  xmit_priv       xmitpriv;
+       struct  recv_priv       recvpriv;
+       struct  sta_priv        stapriv;
+       struct  security_priv   securitypriv;
+       struct  registry_priv   registrypriv;
+       struct  wlan_acl_pool   acl_list;
+       struct  pwrctrl_priv    pwrctrlpriv;
+       struct  eeprom_priv eeprompriv;
+       struct  hal_priv        halpriv;
+       struct  led_priv        ledpriv;
+       struct mp_priv  mppriv;
+       s32     bDriverStopped;
+       s32     bSurpriseRemoved;
+       u32     IsrContent;
+       u32     ImrContent;
+       u8      EepromAddressSize;
+       u8      hw_init_completed;
+       struct task_struct *cmdThread;
+        pid_t evtThread;
+       struct task_struct *xmitThread;
+       pid_t recvThread;
+       uint (*dvobj_init)(struct _adapter *adapter);
+       void (*dvobj_deinit)(struct _adapter *adapter);
+       struct net_device *pnetdev;
+       int bup;
+       struct net_device_stats stats;
+       struct iw_statistics iwstats;
+       int pid; /*process id from UI*/
+       struct work_struct wkFilterRxFF0;
+       u8 blnEnableRxFF0Filter;
+       spinlock_t lockRxFF0Filter;
+       const struct firmware *fw;
+       struct usb_interface *pusb_intf;
+       struct mutex mutex_start;
+       struct completion rtl8712_fw_ready;
+};
+
+static inline u8 *myid(struct eeprom_priv *peepriv)
+{
+       return peepriv->mac_addr;
+}
+
+u8 r8712_usb_hal_bus_init(struct _adapter *adapter);
+
+#endif /*__DRV_TYPES_H__*/
+