--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Contributors:
+ * Manjunath Hadli <manjunath.hadli@ti.com>
+ * Prabhakar Lad <prabhakar.lad@ti.com>
+ */
+
+#include <linux/delay.h>
+#include "dm365_isif.h"
+#include "vpfe_mc_capture.h"
+
+#define MAX_WIDTH 4096
+#define MAX_HEIGHT 4096
+
+static const unsigned int isif_fmts[] = {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ MEDIA_BUS_FMT_YUYV8_1X16,
+ MEDIA_BUS_FMT_YUYV10_1X20,
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8,
+ MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+};
+
+#define ISIF_COLPTN_R_Ye 0x0
+#define ISIF_COLPTN_Gr_Cy 0x1
+#define ISIF_COLPTN_Gb_G 0x2
+#define ISIF_COLPTN_B_Mg 0x3
+
+#define ISIF_CCOLP_CP01_0 0
+#define ISIF_CCOLP_CP03_2 2
+#define ISIF_CCOLP_CP05_4 4
+#define ISIF_CCOLP_CP07_6 6
+#define ISIF_CCOLP_CP11_0 8
+#define ISIF_CCOLP_CP13_2 10
+#define ISIF_CCOLP_CP15_4 12
+#define ISIF_CCOLP_CP17_6 14
+
+static const u32 isif_sgrbg_pattern =
+ ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP01_0 |
+ ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP03_2 |
+ ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP05_4 |
+ ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP07_6 |
+ ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP11_0 |
+ ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP13_2 |
+ ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP15_4 |
+ ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP17_6;
+
+static const u32 isif_srggb_pattern =
+ ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP01_0 |
+ ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP03_2 |
+ ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP05_4 |
+ ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP07_6 |
+ ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP11_0 |
+ ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP13_2 |
+ ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP15_4 |
+ ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP17_6;
+
+static inline u32 isif_read(void __iomem *base_addr, u32 offset)
+{
+ return readl(base_addr + offset);
+}
+
+static inline void isif_write(void __iomem *base_addr, u32 val, u32 offset)
+{
+ writel(val, base_addr + offset);
+}
+
+static inline u32 isif_merge(void __iomem *base_addr, u32 mask, u32 val,
+ u32 offset)
+{
+ u32 new_val = (isif_read(base_addr, offset) & ~mask) | (val & mask);
+
+ isif_write(base_addr, new_val, offset);
+
+ return new_val;
+}
+
+static void isif_enable_output_to_sdram(struct vpfe_isif_device *isif, int en)
+{
+ isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_WEN_MASK,
+ en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
+}
+
+static inline void
+isif_regw_lin_tbl(struct vpfe_isif_device *isif, u32 val, u32 offset, int i)
+{
+ if (!i)
+ writel(val, isif->isif_cfg.linear_tbl0_addr + offset);
+ else
+ writel(val, isif->isif_cfg.linear_tbl1_addr + offset);
+}
+
+static void isif_disable_all_modules(struct vpfe_isif_device *isif)
+{
+ /* disable BC */
+ isif_write(isif->isif_cfg.base_addr, 0, CLAMPCFG);
+ /* disable vdfc */
+ isif_write(isif->isif_cfg.base_addr, 0, DFCCTL);
+ /* disable CSC */
+ isif_write(isif->isif_cfg.base_addr, 0, CSCCTL);
+ /* disable linearization */
+ isif_write(isif->isif_cfg.base_addr, 0, LINCFG0);
+}
+
+static void isif_enable(struct vpfe_isif_device *isif, int en)
+{
+ if (!en)
+ /* Before disable isif, disable all ISIF modules */
+ isif_disable_all_modules(isif);
+
+ /*
+ * wait for next VD. Assume lowest scan rate is 12 Hz. So
+ * 100 msec delay is good enough
+ */
+ msleep(100);
+ isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_VDHDEN_MASK,
+ en, SYNCEN);
+}
+
+/*
+ * ISIF helper functions
+ */
+
+#define DM365_ISIF_MDFS_OFFSET 15
+#define DM365_ISIF_MDFS_MASK 0x1
+
+/* get field id in isif hardware */
+enum v4l2_field vpfe_isif_get_fid(struct vpfe_device *vpfe_dev)
+{
+ struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif;
+ u32 field_status;
+
+ field_status = isif_read(isif->isif_cfg.base_addr, MODESET);
+ field_status = (field_status >> DM365_ISIF_MDFS_OFFSET) &
+ DM365_ISIF_MDFS_MASK;
+ return field_status;
+}
+
+static int
+isif_set_pixel_format(struct vpfe_isif_device *isif, unsigned int pixfmt)
+{
+ if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) {
+ if (pixfmt == V4L2_PIX_FMT_SBGGR16)
+ isif->isif_cfg.data_pack = ISIF_PACK_16BIT;
+ else if ((pixfmt == V4L2_PIX_FMT_SGRBG10DPCM8) ||
+ (pixfmt == V4L2_PIX_FMT_SGRBG10ALAW8))
+ isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
+ else
+ return -EINVAL;
+
+ isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW;
+ isif->isif_cfg.bayer.v4l2_pix_fmt = pixfmt;
+ } else {
+ if (pixfmt == V4L2_PIX_FMT_YUYV)
+ isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_YCBYCR;
+ else if (pixfmt == V4L2_PIX_FMT_UYVY)
+ isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY;
+ else
+ return -EINVAL;
+
+ isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
+ isif->isif_cfg.ycbcr.v4l2_pix_fmt = pixfmt;
+ }
+
+ return 0;
+}
+
+static int
+isif_set_frame_format(struct vpfe_isif_device *isif,
+ enum isif_frmfmt frm_fmt)
+{
+ if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12)
+ isif->isif_cfg.bayer.frm_fmt = frm_fmt;
+ else
+ isif->isif_cfg.ycbcr.frm_fmt = frm_fmt;
+
+ return 0;
+}
+
+static int isif_set_image_window(struct vpfe_isif_device *isif)
+{
+ struct v4l2_rect *win = &isif->crop;
+
+ if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) {
+ isif->isif_cfg.bayer.win.top = win->top;
+ isif->isif_cfg.bayer.win.left = win->left;
+ isif->isif_cfg.bayer.win.width = win->width;
+ isif->isif_cfg.bayer.win.height = win->height;
+ return 0;
+ }
+ isif->isif_cfg.ycbcr.win.top = win->top;
+ isif->isif_cfg.ycbcr.win.left = win->left;
+ isif->isif_cfg.ycbcr.win.width = win->width;
+ isif->isif_cfg.ycbcr.win.height = win->height;
+
+ return 0;
+}
+
+static int
+isif_set_buftype(struct vpfe_isif_device *isif, enum isif_buftype buf_type)
+{
+ if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12)
+ isif->isif_cfg.bayer.buf_type = buf_type;
+ else
+ isif->isif_cfg.ycbcr.buf_type = buf_type;
+
+ return 0;
+}
+
+/* configure format in isif hardware */
+static int
+isif_config_format(struct vpfe_device *vpfe_dev, unsigned int pad)
+{
+ struct vpfe_isif_device *vpfe_isif = &vpfe_dev->vpfe_isif;
+ enum isif_frmfmt frm_fmt = ISIF_FRMFMT_INTERLACED;
+ struct v4l2_pix_format format;
+ int ret = 0;
+
+ v4l2_fill_pix_format(&format, &vpfe_dev->vpfe_isif.formats[pad]);
+ mbus_to_pix(&vpfe_dev->vpfe_isif.formats[pad], &format);
+
+ if (isif_set_pixel_format(vpfe_isif, format.pixelformat) < 0) {
+ v4l2_err(&vpfe_dev->v4l2_dev,
+ "Failed to set pixel format in isif\n");
+ return -EINVAL;
+ }
+
+ /* call for s_crop will override these values */
+ vpfe_isif->crop.left = 0;
+ vpfe_isif->crop.top = 0;
+ vpfe_isif->crop.width = format.width;
+ vpfe_isif->crop.height = format.height;
+
+ /* configure the image window */
+ isif_set_image_window(vpfe_isif);
+
+ switch (vpfe_dev->vpfe_isif.formats[pad].field) {
+ case V4L2_FIELD_INTERLACED:
+ /* do nothing, since it is default */
+ ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_INTERLEAVED);
+ break;
+
+ case V4L2_FIELD_NONE:
+ frm_fmt = ISIF_FRMFMT_PROGRESSIVE;
+ /* buffer type only applicable for interlaced scan */
+ break;
+
+ case V4L2_FIELD_SEQ_TB:
+ ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_SEPARATED);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* set the frame format */
+ if (!ret)
+ ret = isif_set_frame_format(vpfe_isif, frm_fmt);
+
+ return ret;
+}
+
+/*
+ * isif_try_format() - Try video format on a pad
+ * @isif: VPFE isif device
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ */
+static void
+isif_try_format(struct vpfe_isif_device *isif, struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ unsigned int width = fmt->format.width;
+ unsigned int height = fmt->format.height;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(isif_fmts); i++) {
+ if (fmt->format.code == isif_fmts[i])
+ break;
+ }
+
+ /* If not found, use YUYV8_2x8 as default */
+ if (i >= ARRAY_SIZE(isif_fmts))
+ fmt->format.code = MEDIA_BUS_FMT_YUYV8_2X8;
+
+ /* Clamp the size. */
+ fmt->format.width = clamp_t(u32, width, 32, MAX_WIDTH);
+ fmt->format.height = clamp_t(u32, height, 32, MAX_HEIGHT);
+
+ /* The data formatter truncates the number of horizontal output
+ * pixels to a multiple of 16. To avoid clipping data, allow
+ * callers to request an output size bigger than the input size
+ * up to the nearest multiple of 16.
+ */
+ if (fmt->pad == ISIF_PAD_SOURCE)
+ fmt->format.width &= ~15;
+}
+
+/*
+ * vpfe_isif_buffer_isr() - isif module non-progressive buffer scheduling isr
+ * @isif: Pointer to isif subdevice.
+ */
+void vpfe_isif_buffer_isr(struct vpfe_isif_device *isif)
+{
+ struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
+ struct vpfe_video_device *video = &isif->video_out;
+ enum v4l2_field field;
+ int fid;
+
+ if (!video->started)
+ return;
+
+ field = video->fmt.fmt.pix.field;
+
+ if (field == V4L2_FIELD_NONE) {
+ /* handle progressive frame capture */
+ if (video->cur_frm != video->next_frm)
+ vpfe_video_process_buffer_complete(video);
+ return;
+ }
+
+ /* interlaced or TB capture check which field we
+ * are in hardware
+ */
+ fid = vpfe_isif_get_fid(vpfe_dev);
+
+ /* switch the software maintained field id */
+ video->field_id ^= 1;
+ if (fid == video->field_id) {
+ /* we are in-sync here,continue */
+ if (fid == 0) {
+ /*
+ * One frame is just being captured. If the
+ * next frame is available, release the current
+ * frame and move on
+ */
+ if (video->cur_frm != video->next_frm)
+ vpfe_video_process_buffer_complete(video);
+ /*
+ * based on whether the two fields are stored
+ * interleavely or separately in memory,
+ * reconfigure the ISIF memory address
+ */
+ if (field == V4L2_FIELD_SEQ_TB)
+ vpfe_video_schedule_bottom_field(video);
+ return;
+ }
+ /*
+ * if one field is just being captured configure
+ * the next frame get the next frame from the
+ * empty queue if no frame is available hold on
+ * to the current buffer
+ */
+ spin_lock(&video->dma_queue_lock);
+ if (!list_empty(&video->dma_queue) &&
+ video->cur_frm == video->next_frm)
+ vpfe_video_schedule_next_buffer(video);
+ spin_unlock(&video->dma_queue_lock);
+ } else if (fid == 0) {
+ /*
+ * out of sync. Recover from any hardware out-of-sync.
+ * May loose one frame
+ */
+ video->field_id = fid;
+ }
+}
+
+/*
+ * vpfe_isif_vidint1_isr() - ISIF module progressive buffer scheduling isr
+ * @isif: Pointer to isif subdevice.
+ */
+void vpfe_isif_vidint1_isr(struct vpfe_isif_device *isif)
+{
+ struct vpfe_video_device *video = &isif->video_out;
+
+ if (!video->started)
+ return;
+
+ spin_lock(&video->dma_queue_lock);
+ if (video->fmt.fmt.pix.field == V4L2_FIELD_NONE &&
+ !list_empty(&video->dma_queue) && video->cur_frm == video->next_frm)
+ vpfe_video_schedule_next_buffer(video);
+
+ spin_unlock(&video->dma_queue_lock);
+}
+
+/*
+ * VPFE video operations
+ */
+
+static int isif_video_queue(struct vpfe_device *vpfe_dev, unsigned long addr)
+{
+ struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif;
+
+ isif_write(isif->isif_cfg.base_addr, (addr >> 21) &
+ ISIF_CADU_BITS, CADU);
+ isif_write(isif->isif_cfg.base_addr, (addr >> 5) &
+ ISIF_CADL_BITS, CADL);
+
+ return 0;
+}
+
+static const struct vpfe_video_operations isif_video_ops = {
+ .queue = isif_video_queue,
+};
+
+/*
+ * V4L2 subdev operations
+ */
+
+/* Parameter operations */
+static int isif_get_params(struct v4l2_subdev *sd, void *params)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+
+ /* only raw module parameters can be set through the IOCTL */
+ if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12)
+ return -EINVAL;
+ memcpy(params, &isif->isif_cfg.bayer.config_params,
+ sizeof(isif->isif_cfg.bayer.config_params));
+ return 0;
+}
+
+static int isif_validate_df_csc_params(struct vpfe_isif_df_csc *df_csc)
+{
+ struct vpfe_isif_color_space_conv *csc;
+ int err = -EINVAL;
+ int i;
+
+ if (!df_csc->df_or_csc) {
+ /* csc configuration */
+ csc = &df_csc->csc;
+ if (csc->en) {
+ for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++)
+ if (csc->coeff[i].integer >
+ ISIF_CSC_COEF_INTEG_MASK ||
+ csc->coeff[i].decimal >
+ ISIF_CSC_COEF_DECIMAL_MASK) {
+ pr_err("Invalid CSC coefficients\n");
+ return err;
+ }
+ }
+ }
+ if (df_csc->start_pix > ISIF_DF_CSC_SPH_MASK) {
+ pr_err("Invalid df_csc start pix value\n");
+ return err;
+ }
+
+ if (df_csc->num_pixels > ISIF_DF_NUMPIX) {
+ pr_err("Invalid df_csc num pixels value\n");
+ return err;
+ }
+
+ if (df_csc->start_line > ISIF_DF_CSC_LNH_MASK) {
+ pr_err("Invalid df_csc start_line value\n");
+ return err;
+ }
+
+ if (df_csc->num_lines > ISIF_DF_NUMLINES) {
+ pr_err("Invalid df_csc num_lines value\n");
+ return err;
+ }
+
+ return 0;
+}
+
+#define DM365_ISIF_MAX_VDFLSFT 4
+#define DM365_ISIF_MAX_VDFSLV 4095
+#define DM365_ISIF_MAX_DFCMEM0 0x1fff
+#define DM365_ISIF_MAX_DFCMEM1 0x1fff
+
+static int isif_validate_dfc_params(struct vpfe_isif_dfc *dfc)
+{
+ int err = -EINVAL;
+ int i;
+
+ if (!dfc->en)
+ return 0;
+
+ if (dfc->corr_whole_line > 1) {
+ pr_err("Invalid corr_whole_line value\n");
+ return err;
+ }
+
+ if (dfc->def_level_shift > DM365_ISIF_MAX_VDFLSFT) {
+ pr_err("Invalid def_level_shift value\n");
+ return err;
+ }
+
+ if (dfc->def_sat_level > DM365_ISIF_MAX_VDFSLV) {
+ pr_err("Invalid def_sat_level value\n");
+ return err;
+ }
+
+ if (!dfc->num_vdefects ||
+ dfc->num_vdefects > VPFE_ISIF_VDFC_TABLE_SIZE) {
+ pr_err("Invalid num_vdefects value\n");
+ return err;
+ }
+
+ for (i = 0; i < VPFE_ISIF_VDFC_TABLE_SIZE; i++) {
+ if (dfc->table[i].pos_vert > DM365_ISIF_MAX_DFCMEM0) {
+ pr_err("Invalid pos_vert value\n");
+ return err;
+ }
+ if (dfc->table[i].pos_horz > DM365_ISIF_MAX_DFCMEM1) {
+ pr_err("Invalid pos_horz value\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+#define DM365_ISIF_MAX_CLVRV 0xfff
+#define DM365_ISIF_MAX_CLDC 0x1fff
+#define DM365_ISIF_MAX_CLHSH 0x1fff
+#define DM365_ISIF_MAX_CLHSV 0x1fff
+#define DM365_ISIF_MAX_CLVSH 0x1fff
+#define DM365_ISIF_MAX_CLVSV 0x1fff
+#define DM365_ISIF_MAX_HEIGHT_BLACK_REGION 0x1fff
+
+static int isif_validate_bclamp_params(struct vpfe_isif_black_clamp *bclamp)
+{
+ int err = -EINVAL;
+
+ if (bclamp->dc_offset > DM365_ISIF_MAX_CLDC) {
+ pr_err("Invalid bclamp dc_offset value\n");
+ return err;
+ }
+ if (!bclamp->en)
+ return 0;
+ if (bclamp->horz.clamp_pix_limit > 1) {
+ pr_err("Invalid bclamp horz clamp_pix_limit value\n");
+ return err;
+ }
+ if (bclamp->horz.win_count_calc < 1 ||
+ bclamp->horz.win_count_calc > 32) {
+ pr_err("Invalid bclamp horz win_count_calc value\n");
+ return err;
+ }
+ if (bclamp->horz.win_start_h_calc > DM365_ISIF_MAX_CLHSH) {
+ pr_err("Invalid bclamp win_start_v_calc value\n");
+ return err;
+ }
+
+ if (bclamp->horz.win_start_v_calc > DM365_ISIF_MAX_CLHSV) {
+ pr_err("Invalid bclamp win_start_v_calc value\n");
+ return err;
+ }
+ if (bclamp->vert.reset_clamp_val > DM365_ISIF_MAX_CLVRV) {
+ pr_err("Invalid bclamp reset_clamp_val value\n");
+ return err;
+ }
+ if (bclamp->vert.ob_v_sz_calc > DM365_ISIF_MAX_HEIGHT_BLACK_REGION) {
+ pr_err("Invalid bclamp ob_v_sz_calc value\n");
+ return err;
+ }
+ if (bclamp->vert.ob_start_h > DM365_ISIF_MAX_CLVSH) {
+ pr_err("Invalid bclamp ob_start_h value\n");
+ return err;
+ }
+ if (bclamp->vert.ob_start_v > DM365_ISIF_MAX_CLVSV) {
+ pr_err("Invalid bclamp ob_start_h value\n");
+ return err;
+ }
+ return 0;
+}
+
+static int
+isif_validate_raw_params(struct vpfe_isif_raw_config *params)
+{
+ int ret;
+
+ ret = isif_validate_df_csc_params(¶ms->df_csc);
+ if (ret)
+ return ret;
+ ret = isif_validate_dfc_params(¶ms->dfc);
+ if (ret)
+ return ret;
+ ret = isif_validate_bclamp_params(¶ms->bclamp);
+ return ret;
+}
+
+static int isif_set_params(struct v4l2_subdev *sd, void *params)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct vpfe_isif_raw_config isif_raw_params;
+ int ret = -EINVAL;
+
+ /* only raw module parameters can be set through the IOCTL */
+ if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12)
+ return ret;
+
+ memcpy(&isif_raw_params, params, sizeof(isif_raw_params));
+ if (!isif_validate_raw_params(&isif_raw_params)) {
+ memcpy(&isif->isif_cfg.bayer.config_params, &isif_raw_params,
+ sizeof(isif_raw_params));
+ ret = 0;
+ }
+ return ret;
+}
+/*
+ * isif_ioctl() - isif module private ioctl's
+ * @sd: VPFE isif V4L2 subdevice
+ * @cmd: ioctl command
+ * @arg: ioctl argument
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static long isif_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+ int ret;
+
+ switch (cmd) {
+ case VIDIOC_VPFE_ISIF_S_RAW_PARAMS:
+ ret = isif_set_params(sd, arg);
+ break;
+
+ case VIDIOC_VPFE_ISIF_G_RAW_PARAMS:
+ ret = isif_get_params(sd, arg);
+ break;
+
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+ return ret;
+}
+
+static void isif_config_gain_offset(struct vpfe_isif_device *isif)
+{
+ struct vpfe_isif_gain_offsets_adj *gain_off_ptr =
+ &isif->isif_cfg.bayer.config_params.gain_offset;
+ void __iomem *base = isif->isif_cfg.base_addr;
+ u32 val;
+
+ val = ((gain_off_ptr->gain_sdram_en & 1) << GAIN_SDRAM_EN_SHIFT) |
+ ((gain_off_ptr->gain_ipipe_en & 1) << GAIN_IPIPE_EN_SHIFT) |
+ ((gain_off_ptr->gain_h3a_en & 1) << GAIN_H3A_EN_SHIFT) |
+ ((gain_off_ptr->offset_sdram_en & 1) << OFST_SDRAM_EN_SHIFT) |
+ ((gain_off_ptr->offset_ipipe_en & 1) << OFST_IPIPE_EN_SHIFT) |
+ ((gain_off_ptr->offset_h3a_en & 1) << OFST_H3A_EN_SHIFT);
+ isif_merge(base, GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
+
+ isif_write(base, isif->isif_cfg.isif_gain_params.cr_gain, CRGAIN);
+ isif_write(base, isif->isif_cfg.isif_gain_params.cgr_gain, CGRGAIN);
+ isif_write(base, isif->isif_cfg.isif_gain_params.cgb_gain, CGBGAIN);
+ isif_write(base, isif->isif_cfg.isif_gain_params.cb_gain, CBGAIN);
+ isif_write(base, isif->isif_cfg.isif_gain_params.offset & OFFSET_MASK,
+ COFSTA);
+
+}
+
+static void isif_config_bclamp(struct vpfe_isif_device *isif,
+ struct vpfe_isif_black_clamp *bc)
+{
+ u32 val;
+
+ /**
+ * DC Offset is always added to image data irrespective of bc enable
+ * status
+ */
+ val = bc->dc_offset & ISIF_BC_DCOFFSET_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLDCOFST);
+
+ if (!bc->en)
+ return;
+
+ val = (bc->bc_mode_color & ISIF_BC_MODE_COLOR_MASK) <<
+ ISIF_BC_MODE_COLOR_SHIFT;
+
+ /* Enable BC and horizontal clamp calculation paramaters */
+ val = val | 1 | ((bc->horz.mode & ISIF_HORZ_BC_MODE_MASK) <<
+ ISIF_HORZ_BC_MODE_SHIFT);
+
+ isif_write(isif->isif_cfg.base_addr, val, CLAMPCFG);
+
+ if (bc->horz.mode != VPFE_ISIF_HORZ_BC_DISABLE) {
+ /*
+ * Window count for calculation
+ * Base window selection
+ * pixel limit
+ * Horizontal size of window
+ * vertical size of the window
+ * Horizontal start position of the window
+ * Vertical start position of the window
+ */
+ val = (bc->horz.win_count_calc & ISIF_HORZ_BC_WIN_COUNT_MASK) |
+ ((bc->horz.base_win_sel_calc & 1) <<
+ ISIF_HORZ_BC_WIN_SEL_SHIFT) |
+ ((bc->horz.clamp_pix_limit & 1) <<
+ ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
+ ((bc->horz.win_h_sz_calc &
+ ISIF_HORZ_BC_WIN_H_SIZE_MASK) <<
+ ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
+ ((bc->horz.win_v_sz_calc &
+ ISIF_HORZ_BC_WIN_V_SIZE_MASK) <<
+ ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
+
+ isif_write(isif->isif_cfg.base_addr, val, CLHWIN0);
+
+ val = bc->horz.win_start_h_calc & ISIF_HORZ_BC_WIN_START_H_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLHWIN1);
+
+ val = bc->horz.win_start_v_calc & ISIF_HORZ_BC_WIN_START_V_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLHWIN2);
+ }
+
+ /* vertical clamp calculation paramaters */
+ /* OB H Valid */
+ val = bc->vert.ob_h_sz_calc & ISIF_VERT_BC_OB_H_SZ_MASK;
+
+ /* Reset clamp value sel for previous line */
+ val |= (bc->vert.reset_val_sel & ISIF_VERT_BC_RST_VAL_SEL_MASK) <<
+ ISIF_VERT_BC_RST_VAL_SEL_SHIFT;
+
+ /* Line average coefficient */
+ val |= bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT;
+ isif_write(isif->isif_cfg.base_addr, val, CLVWIN0);
+
+ /* Configured reset value */
+ if (bc->vert.reset_val_sel == VPFE_ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL) {
+ val = bc->vert.reset_clamp_val & ISIF_VERT_BC_RST_VAL_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLVRV);
+ }
+
+ /* Optical Black horizontal start position */
+ val = bc->vert.ob_start_h & ISIF_VERT_BC_OB_START_HORZ_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLVWIN1);
+
+ /* Optical Black vertical start position */
+ val = bc->vert.ob_start_v & ISIF_VERT_BC_OB_START_VERT_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLVWIN2);
+
+ val = bc->vert.ob_v_sz_calc & ISIF_VERT_BC_OB_VERT_SZ_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLVWIN3);
+
+ /* Vertical start position for BC subtraction */
+ val = bc->vert_start_sub & ISIF_BC_VERT_START_SUB_V_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, CLSV);
+}
+
+/* This function will configure the window size to be capture in ISIF reg */
+static void
+isif_setwin(struct vpfe_isif_device *isif, struct v4l2_rect *image_win,
+ enum isif_frmfmt frm_fmt, int ppc, int mode)
+{
+ int horz_nr_pixels;
+ int vert_nr_lines;
+ int horz_start;
+ int vert_start;
+ int mid_img;
+
+ /*
+ * ppc - per pixel count. indicates how many pixels per cell
+ * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+ * raw capture this is 1
+ */
+ horz_start = image_win->left << (ppc - 1);
+ horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
+
+ /* Writing the horizontal info into the registers */
+ isif_write(isif->isif_cfg.base_addr,
+ horz_start & START_PX_HOR_MASK, SPH);
+ isif_write(isif->isif_cfg.base_addr,
+ horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
+ vert_start = image_win->top;
+
+ if (frm_fmt == ISIF_FRMFMT_INTERLACED) {
+ vert_nr_lines = (image_win->height >> 1) - 1;
+ vert_start >>= 1;
+ /* To account for VD since line 0 doesn't have any data */
+ vert_start += 1;
+ } else {
+ /* To account for VD since line 0 doesn't have any data */
+ vert_start += 1;
+ vert_nr_lines = image_win->height - 1;
+ /* configure VDINT0 and VDINT1 */
+ mid_img = vert_start + (image_win->height / 2);
+ isif_write(isif->isif_cfg.base_addr, mid_img, VDINT1);
+ }
+
+ if (!mode)
+ isif_write(isif->isif_cfg.base_addr, 0, VDINT0);
+ else
+ isif_write(isif->isif_cfg.base_addr, vert_nr_lines, VDINT0);
+ isif_write(isif->isif_cfg.base_addr,
+ vert_start & START_VER_ONE_MASK, SLV0);
+ isif_write(isif->isif_cfg.base_addr,
+ vert_start & START_VER_TWO_MASK, SLV1);
+ isif_write(isif->isif_cfg.base_addr,
+ vert_nr_lines & NUM_LINES_VER, LNV);
+}
+
+#define DM365_ISIF_DFCMWR_MEMORY_WRITE 1
+#define DM365_ISIF_DFCMRD_MEMORY_READ 0x2
+
+static void
+isif_config_dfc(struct vpfe_isif_device *isif, struct vpfe_isif_dfc *vdfc)
+{
+#define DFC_WRITE_WAIT_COUNT 1000
+ u32 count = DFC_WRITE_WAIT_COUNT;
+ u32 val;
+ int i;
+
+ if (!vdfc->en)
+ return;
+
+ /* Correction mode */
+ val = (vdfc->corr_mode & ISIF_VDFC_CORR_MOD_MASK) <<
+ ISIF_VDFC_CORR_MOD_SHIFT;
+
+ /* Correct whole line or partial */
+ if (vdfc->corr_whole_line)
+ val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
+
+ /* level shift value */
+ val |= (vdfc->def_level_shift & ISIF_VDFC_LEVEL_SHFT_MASK) <<
+ ISIF_VDFC_LEVEL_SHFT_SHIFT;
+
+ isif_write(isif->isif_cfg.base_addr, val, DFCCTL);
+
+ /* Defect saturation level */
+ val = vdfc->def_sat_level & ISIF_VDFC_SAT_LEVEL_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, VDFSATLV);
+
+ isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_vert &
+ ISIF_VDFC_POS_MASK, DFCMEM0);
+ isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_horz &
+ ISIF_VDFC_POS_MASK, DFCMEM1);
+ if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL ||
+ vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[0].level_at_pos, DFCMEM2);
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[0].level_up_pixels, DFCMEM3);
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[0].level_low_pixels, DFCMEM4);
+ }
+
+ val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
+ /* set DFCMARST and set DFCMWR */
+ val |= 1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT;
+ val |= 1;
+ isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL);
+
+ while (count && (isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x01))
+ count--;
+
+ val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
+ if (!count) {
+ pr_debug("defect table write timeout !!\n");
+ return;
+ }
+
+ for (i = 1; i < vdfc->num_vdefects; i++) {
+ isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_vert &
+ ISIF_VDFC_POS_MASK, DFCMEM0);
+
+ isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_horz &
+ ISIF_VDFC_POS_MASK, DFCMEM1);
+
+ if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL ||
+ vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[i].level_at_pos, DFCMEM2);
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[i].level_up_pixels, DFCMEM3);
+ isif_write(isif->isif_cfg.base_addr,
+ vdfc->table[i].level_low_pixels, DFCMEM4);
+ }
+ val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
+ /* clear DFCMARST and set DFCMWR */
+ val &= ~(1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT);
+ val |= 1;
+ isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL);
+
+ count = DFC_WRITE_WAIT_COUNT;
+ while (count && (isif_read(isif->isif_cfg.base_addr,
+ DFCMEMCTL) & 0x01))
+ count--;
+
+ val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
+ if (!count) {
+ pr_debug("defect table write timeout !!\n");
+ return;
+ }
+ }
+ if (vdfc->num_vdefects < VPFE_ISIF_VDFC_TABLE_SIZE) {
+ /* Extra cycle needed */
+ isif_write(isif->isif_cfg.base_addr, 0, DFCMEM0);
+ isif_write(isif->isif_cfg.base_addr,
+ DM365_ISIF_MAX_DFCMEM1, DFCMEM1);
+ isif_write(isif->isif_cfg.base_addr,
+ DM365_ISIF_DFCMWR_MEMORY_WRITE, DFCMEMCTL);
+ }
+ /* enable VDFC */
+ isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT),
+ (1 << ISIF_VDFC_EN_SHIFT), DFCCTL);
+
+ isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT),
+ (0 << ISIF_VDFC_EN_SHIFT), DFCCTL);
+
+ isif_write(isif->isif_cfg.base_addr, 0x6, DFCMEMCTL);
+ for (i = 0; i < vdfc->num_vdefects; i++) {
+ count = DFC_WRITE_WAIT_COUNT;
+ while (count &&
+ (isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x2))
+ count--;
+ val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL);
+ if (!count) {
+ pr_debug("defect table write timeout !!\n");
+ return;
+ }
+ isif_write(isif->isif_cfg.base_addr,
+ DM365_ISIF_DFCMRD_MEMORY_READ, DFCMEMCTL);
+ }
+}
+
+static void
+isif_config_csc(struct vpfe_isif_device *isif, struct vpfe_isif_df_csc *df_csc)
+{
+ u32 val1;
+ u32 val2;
+ u32 i;
+
+ if (!df_csc->csc.en) {
+ isif_write(isif->isif_cfg.base_addr, 0, CSCCTL);
+ return;
+ }
+ /* initialize all bits to 0 */
+ val1 = 0;
+ for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++) {
+ if ((i % 2) == 0) {
+ /* CSCM - LSB */
+ val1 = ((df_csc->csc.coeff[i].integer &
+ ISIF_CSC_COEF_INTEG_MASK) <<
+ ISIF_CSC_COEF_INTEG_SHIFT) |
+ ((df_csc->csc.coeff[i].decimal &
+ ISIF_CSC_COEF_DECIMAL_MASK));
+ } else {
+
+ /* CSCM - MSB */
+ val2 = ((df_csc->csc.coeff[i].integer &
+ ISIF_CSC_COEF_INTEG_MASK) <<
+ ISIF_CSC_COEF_INTEG_SHIFT) |
+ ((df_csc->csc.coeff[i].decimal &
+ ISIF_CSC_COEF_DECIMAL_MASK));
+ val2 <<= ISIF_CSCM_MSB_SHIFT;
+ val2 |= val1;
+ isif_write(isif->isif_cfg.base_addr, val2,
+ (CSCM0 + ((i-1) << 1)));
+ }
+ }
+ /* program the active area */
+ isif_write(isif->isif_cfg.base_addr, df_csc->start_pix &
+ ISIF_DF_CSC_SPH_MASK, FMTSPH);
+ /*
+ * one extra pixel as required for CSC. Actually number of
+ * pixel - 1 should be configured in this register. So we
+ * need to subtract 1 before writing to FMTSPH, but we will
+ * not do this since csc requires one extra pixel
+ */
+ isif_write(isif->isif_cfg.base_addr, df_csc->num_pixels &
+ ISIF_DF_CSC_SPH_MASK, FMTLNH);
+ isif_write(isif->isif_cfg.base_addr, df_csc->start_line &
+ ISIF_DF_CSC_SPH_MASK, FMTSLV);
+ /*
+ * one extra line as required for CSC. See reason documented for
+ * num_pixels
+ */
+ isif_write(isif->isif_cfg.base_addr, df_csc->num_lines &
+ ISIF_DF_CSC_SPH_MASK, FMTLNV);
+ /* Enable CSC */
+ isif_write(isif->isif_cfg.base_addr, 1, CSCCTL);
+}
+
+static void
+isif_config_linearization(struct vpfe_isif_device *isif,
+ struct vpfe_isif_linearize *linearize)
+{
+ u32 val;
+ u32 i;
+
+ if (!linearize->en) {
+ isif_write(isif->isif_cfg.base_addr, 0, LINCFG0);
+ return;
+ }
+ /* shift value for correction */
+ val = (linearize->corr_shft & ISIF_LIN_CORRSFT_MASK) <<
+ ISIF_LIN_CORRSFT_SHIFT;
+ /* enable */
+ val |= 1;
+ isif_write(isif->isif_cfg.base_addr, val, LINCFG0);
+ /* Scale factor */
+ val = (linearize->scale_fact.integer & 1) <<
+ ISIF_LIN_SCALE_FACT_INTEG_SHIFT;
+ val |= linearize->scale_fact.decimal & ISIF_LIN_SCALE_FACT_DECIMAL_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, LINCFG1);
+
+ for (i = 0; i < VPFE_ISIF_LINEAR_TAB_SIZE; i++) {
+ val = linearize->table[i] & ISIF_LIN_ENTRY_MASK;
+ if (i%2)
+ isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 1);
+ else
+ isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 0);
+ }
+}
+
+static void
+isif_config_culling(struct vpfe_isif_device *isif, struct vpfe_isif_cul *cul)
+{
+ u32 val;
+
+ /* Horizontal pattern */
+ val = cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT;
+ val |= cul->hcpat_odd;
+ isif_write(isif->isif_cfg.base_addr, val, CULH);
+ /* vertical pattern */
+ isif_write(isif->isif_cfg.base_addr, cul->vcpat, CULV);
+ /* LPF */
+ isif_merge(isif->isif_cfg.base_addr, ISIF_LPF_MASK << ISIF_LPF_SHIFT,
+ cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
+}
+
+static int isif_get_pix_fmt(u32 mbus_code)
+{
+ switch (mbus_code) {
+ case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8:
+ case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
+ case MEDIA_BUS_FMT_SGRBG12_1X12:
+ return ISIF_PIXFMT_RAW;
+
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ case MEDIA_BUS_FMT_YUYV10_2X10:
+ case MEDIA_BUS_FMT_Y8_1X8:
+ return ISIF_PIXFMT_YCBCR_8BIT;
+
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ case MEDIA_BUS_FMT_YUYV10_1X20:
+ return ISIF_PIXFMT_YCBCR_16BIT;
+
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+#define ISIF_INTERLACE_INVERSE_MODE 0x4b6d
+#define ISIF_INTERLACE_NON_INVERSE_MODE 0x0b6d
+#define ISIF_PROGRESSIVE_INVERSE_MODE 0x4000
+#define ISIF_PROGRESSIVE_NON_INVERSE_MODE 0x0000
+
+static int isif_config_raw(struct v4l2_subdev *sd, int mode)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct isif_params_raw *params = &isif->isif_cfg.bayer;
+ struct vpfe_isif_raw_config *module_params =
+ &isif->isif_cfg.bayer.config_params;
+ struct v4l2_mbus_framefmt *format;
+ int pix_fmt;
+ u32 val;
+
+ format = &isif->formats[ISIF_PAD_SINK];
+
+ /* In case of user has set BT656IF earlier, it should be reset
+ * when configuring for raw input.
+ */
+ isif_write(isif->isif_cfg.base_addr, 0, REC656IF);
+ /* Configure CCDCFG register
+ * Set CCD Not to swap input since input is RAW data
+ * Set FID detection function to Latch at V-Sync
+ * Set WENLOG - isif valid area
+ * Set TRGSEL
+ * Set EXTRG
+ * Packed to 8 or 16 bits
+ */
+ val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
+ ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
+ ISIF_CCDCFG_EXTRG_DISABLE | (isif->isif_cfg.data_pack &
+ ISIF_DATA_PACK_MASK);
+ isif_write(isif->isif_cfg.base_addr, val, CCDCFG);
+
+ pix_fmt = isif_get_pix_fmt(format->code);
+ if (pix_fmt < 0) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ /*
+ * Configure the vertical sync polarity(MODESET.VDPOL)
+ * Configure the horizontal sync polarity (MODESET.HDPOL)
+ * Configure frame id polarity (MODESET.FLDPOL)
+ * Configure data polarity
+ * Configure External WEN Selection
+ * Configure frame format(progressive or interlace)
+ * Configure pixel format (Input mode)
+ * Configure the data shift
+ */
+ val = ISIF_VDHDOUT_INPUT | ((params->vd_pol & ISIF_VD_POL_MASK) <<
+ ISIF_VD_POL_SHIFT) | ((params->hd_pol & ISIF_HD_POL_MASK) <<
+ ISIF_HD_POL_SHIFT) | ((params->fid_pol & ISIF_FID_POL_MASK) <<
+ ISIF_FID_POL_SHIFT) | ((ISIF_DATAPOL_NORMAL &
+ ISIF_DATAPOL_MASK) << ISIF_DATAPOL_SHIFT) | ((ISIF_EXWEN_DISABLE &
+ ISIF_EXWEN_MASK) << ISIF_EXWEN_SHIFT) | ((params->frm_fmt &
+ ISIF_FRM_FMT_MASK) << ISIF_FRM_FMT_SHIFT) | ((pix_fmt &
+ ISIF_INPUT_MASK) << ISIF_INPUT_SHIFT);
+
+ /* currently only MEDIA_BUS_FMT_SGRBG12_1X12 is
+ * supported. shift appropriately depending on
+ * different MBUS fmt's added
+ */
+ if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12)
+ val |= ((VPFE_ISIF_NO_SHIFT &
+ ISIF_DATASFT_MASK) << ISIF_DATASFT_SHIFT);
+
+ isif_write(isif->isif_cfg.base_addr, val, MODESET);
+ /*
+ * Configure GAMMAWD register
+ * CFA pattern setting
+ */
+ val = (params->cfa_pat & ISIF_GAMMAWD_CFA_MASK) <<
+ ISIF_GAMMAWD_CFA_SHIFT;
+ /* Gamma msb */
+ if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10ALAW8)
+ val = val | ISIF_ALAW_ENABLE;
+
+ val = val | ((params->data_msb & ISIF_ALAW_GAMA_WD_MASK) <<
+ ISIF_ALAW_GAMA_WD_SHIFT);
+
+ isif_write(isif->isif_cfg.base_addr, val, CGAMMAWD);
+ /* Configure DPCM compression settings */
+ if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10DPCM8) {
+ val = 1 << ISIF_DPCM_EN_SHIFT;
+ val |= (params->dpcm_predictor &
+ ISIF_DPCM_PREDICTOR_MASK) << ISIF_DPCM_PREDICTOR_SHIFT;
+ }
+ isif_write(isif->isif_cfg.base_addr, val, MISC);
+ /* Configure Gain & Offset */
+ isif_config_gain_offset(isif);
+ /* Configure Color pattern */
+ if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12)
+ val = isif_sgrbg_pattern;
+ else
+ /* default set to rggb */
+ val = isif_srggb_pattern;
+
+ isif_write(isif->isif_cfg.base_addr, val, CCOLP);
+
+ /* Configure HSIZE register */
+ val = (params->horz_flip_en & ISIF_HSIZE_FLIP_MASK) <<
+ ISIF_HSIZE_FLIP_SHIFT;
+
+ /* calculate line offset in 32 bytes based on pack value */
+ if (isif->isif_cfg.data_pack == ISIF_PACK_8BIT)
+ val |= ((params->win.width + 31) >> 5) & ISIF_LINEOFST_MASK;
+ else if (isif->isif_cfg.data_pack == ISIF_PACK_12BIT)
+ val |= ((((params->win.width + (params->win.width >> 2)) +
+ 31) >> 5) & ISIF_LINEOFST_MASK);
+ else
+ val |= (((params->win.width * 2) + 31) >> 5) &
+ ISIF_LINEOFST_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, HSIZE);
+ /* Configure SDOFST register */
+ if (params->frm_fmt == ISIF_FRMFMT_INTERLACED) {
+ if (params->image_invert_en)
+ /* For interlace inverse mode */
+ isif_write(isif->isif_cfg.base_addr,
+ ISIF_INTERLACE_INVERSE_MODE, SDOFST);
+ else
+ /* For interlace non inverse mode */
+ isif_write(isif->isif_cfg.base_addr,
+ ISIF_INTERLACE_NON_INVERSE_MODE, SDOFST);
+ } else if (params->frm_fmt == ISIF_FRMFMT_PROGRESSIVE) {
+ if (params->image_invert_en)
+ isif_write(isif->isif_cfg.base_addr,
+ ISIF_PROGRESSIVE_INVERSE_MODE, SDOFST);
+ else
+ /* For progessive non inverse mode */
+ isif_write(isif->isif_cfg.base_addr,
+ ISIF_PROGRESSIVE_NON_INVERSE_MODE, SDOFST);
+ }
+ /* Configure video window */
+ isif_setwin(isif, ¶ms->win, params->frm_fmt, 1, mode);
+ /* Configure Black Clamp */
+ isif_config_bclamp(isif, &module_params->bclamp);
+ /* Configure Vertical Defection Pixel Correction */
+ isif_config_dfc(isif, &module_params->dfc);
+ if (!module_params->df_csc.df_or_csc)
+ /* Configure Color Space Conversion */
+ isif_config_csc(isif, &module_params->df_csc);
+
+ isif_config_linearization(isif, &module_params->linearize);
+ /* Configure Culling */
+ isif_config_culling(isif, &module_params->culling);
+ /* Configure Horizontal and vertical offsets(DFC,LSC,Gain) */
+ val = module_params->horz_offset & ISIF_DATA_H_OFFSET_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, DATAHOFST);
+
+ val = module_params->vert_offset & ISIF_DATA_V_OFFSET_MASK;
+ isif_write(isif->isif_cfg.base_addr, val, DATAVOFST);
+
+ return 0;
+}
+
+#define DM365_ISIF_HSIZE_MASK 0xffffffe0
+#define DM365_ISIF_SDOFST_2_LINES 0x00000249
+
+/* This function will configure ISIF for YCbCr parameters. */
+static int isif_config_ycbcr(struct v4l2_subdev *sd, int mode)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct isif_ycbcr_config *params = &isif->isif_cfg.ycbcr;
+ struct v4l2_mbus_framefmt *format;
+ int pix_fmt;
+ u32 modeset;
+ u32 ccdcfg;
+
+ format = &isif->formats[ISIF_PAD_SINK];
+ /*
+ * first reset the ISIF
+ * all registers have default values after reset
+ * This is important since we assume default values to be set in
+ * a lot of registers that we didn't touch
+ */
+ /* start with all bits zero */
+ ccdcfg = modeset = 0;
+ pix_fmt = isif_get_pix_fmt(format->code);
+ if (pix_fmt < 0) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ /* configure pixel format or input mode */
+ modeset = modeset | ((pix_fmt & ISIF_INPUT_MASK) <<
+ ISIF_INPUT_SHIFT) | ((params->frm_fmt & ISIF_FRM_FMT_MASK) <<
+ ISIF_FRM_FMT_SHIFT) | (((params->fid_pol &
+ ISIF_FID_POL_MASK) << ISIF_FID_POL_SHIFT)) |
+ (((params->hd_pol & ISIF_HD_POL_MASK) << ISIF_HD_POL_SHIFT)) |
+ (((params->vd_pol & ISIF_VD_POL_MASK) << ISIF_VD_POL_SHIFT));
+ /* pack the data to 8-bit CCDCCFG */
+ switch (format->code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ modeset |= ((VPFE_PINPOL_NEGATIVE & ISIF_VD_POL_MASK) <<
+ ISIF_VD_POL_SHIFT);
+ isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
+ ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR;
+ break;
+
+ case MEDIA_BUS_FMT_YUYV10_2X10:
+ if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ /* setup BT.656, embedded sync */
+ isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
+ /* enable 10 bit mode in ccdcfg */
+ ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR |
+ ISIF_BW656_ENABLE;
+ break;
+
+ case MEDIA_BUS_FMT_YUYV10_1X20:
+ if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ isif_write(isif->isif_cfg.base_addr, 3, REC656IF);
+ break;
+
+ case MEDIA_BUS_FMT_Y8_1X8:
+ ccdcfg |= ISIF_PACK_8BIT;
+ ccdcfg |= ISIF_YCINSWP_YCBCR;
+ if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ break;
+
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) {
+ pr_debug("Invalid pix_fmt(input mode)\n");
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ /* should never come here */
+ pr_debug("Invalid interface type\n");
+ return -EINVAL;
+ }
+ isif_write(isif->isif_cfg.base_addr, modeset, MODESET);
+ /* Set up pix order */
+ ccdcfg |= (params->pix_order & ISIF_PIX_ORDER_MASK) <<
+ ISIF_PIX_ORDER_SHIFT;
+ isif_write(isif->isif_cfg.base_addr, ccdcfg, CCDCFG);
+ /* configure video window */
+ if (format->code == MEDIA_BUS_FMT_YUYV10_1X20 ||
+ format->code == MEDIA_BUS_FMT_YUYV8_1X16)
+ isif_setwin(isif, ¶ms->win, params->frm_fmt, 1, mode);
+ else
+ isif_setwin(isif, ¶ms->win, params->frm_fmt, 2, mode);
+
+ /*
+ * configure the horizontal line offset
+ * this is done by rounding up width to a multiple of 16 pixels
+ * and multiply by two to account for y:cb:cr 4:2:2 data
+ */
+ isif_write(isif->isif_cfg.base_addr,
+ ((((params->win.width * 2) + 31) &
+ DM365_ISIF_HSIZE_MASK) >> 5), HSIZE);
+
+ /* configure the memory line offset */
+ if (params->frm_fmt == ISIF_FRMFMT_INTERLACED &&
+ params->buf_type == ISIF_BUFTYPE_FLD_INTERLEAVED)
+ /* two fields are interleaved in memory */
+ isif_write(isif->isif_cfg.base_addr,
+ DM365_ISIF_SDOFST_2_LINES, SDOFST);
+ return 0;
+}
+
+static int isif_configure(struct v4l2_subdev *sd, int mode)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = &isif->formats[ISIF_PAD_SINK];
+
+ switch (format->code) {
+ case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8:
+ case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
+ case MEDIA_BUS_FMT_SGRBG12_1X12:
+ return isif_config_raw(sd, mode);
+
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ case MEDIA_BUS_FMT_YUYV10_2X10:
+ case MEDIA_BUS_FMT_Y8_1X8:
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ case MEDIA_BUS_FMT_YUYV10_1X20:
+ return isif_config_ycbcr(sd, mode);
+
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+/*
+ * isif_set_stream() - Enable/Disable streaming on the ISIF module
+ * @sd: VPFE ISIF V4L2 subdevice
+ * @enable: Enable/disable stream
+ */
+static int isif_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ int ret;
+
+ if (enable) {
+ ret = isif_configure(sd,
+ (isif->output == ISIF_OUTPUT_MEMORY) ? 0 : 1);
+ if (ret)
+ return ret;
+ if (isif->output == ISIF_OUTPUT_MEMORY)
+ isif_enable_output_to_sdram(isif, 1);
+ isif_enable(isif, 1);
+ } else {
+ isif_enable(isif, 0);
+ isif_enable_output_to_sdram(isif, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * __isif_get_format() - helper function for getting isif format
+ * @isif: pointer to isif private structure.
+ * @pad: pad number.
+ * @cfg: V4L2 subdev pad config
+ * @which: wanted subdev format.
+ */
+static struct v4l2_mbus_framefmt *
+__isif_get_format(struct vpfe_isif_device *isif, struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_subdev_format fmt;
+
+ fmt.pad = pad;
+ fmt.which = which;
+
+ return v4l2_subdev_get_try_format(&isif->subdev, cfg, pad);
+ }
+ return &isif->formats[pad];
+}
+
+/*
+ * isif_set_format() - set format on pad
+ * @sd : VPFE ISIF device
+ * @cfg : V4L2 subdev pad config
+ * @fmt : pointer to v4l2 subdev format structure
+ *
+ * Return 0 on success or -EINVAL if format or pad is invalid
+ */
+static int
+isif_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __isif_get_format(isif, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ isif_try_format(isif, cfg, fmt);
+ memcpy(format, &fmt->format, sizeof(*format));
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ return 0;
+
+ if (fmt->pad == ISIF_PAD_SOURCE)
+ return isif_config_format(vpfe_dev, fmt->pad);
+
+ return 0;
+}
+
+/*
+ * isif_get_format() - Retrieve the video format on a pad
+ * @sd: VPFE ISIF V4L2 subdevice
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
+ * to the format type.
+ */
+static int
+isif_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __isif_get_format(vpfe_isif, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ memcpy(&fmt->format, format, sizeof(fmt->format));
+
+ return 0;
+}
+
+/*
+ * isif_enum_frame_size() - enum frame sizes on pads
+ * @sd: VPFE isif V4L2 subdevice
+ * @cfg: V4L2 subdev pad config
+ * @code: pointer to v4l2_subdev_frame_size_enum structure
+ */
+static int
+isif_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+ struct v4l2_subdev_format format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.pad = fse->pad;
+ format.format.code = fse->code;
+ format.format.width = 1;
+ format.format.height = 1;
+ format.which = fse->which;
+ isif_try_format(isif, cfg, &format);
+ fse->min_width = format.format.width;
+ fse->min_height = format.format.height;
+
+ if (format.format.code != fse->code)
+ return -EINVAL;
+
+ format.pad = fse->pad;
+ format.format.code = fse->code;
+ format.format.width = -1;
+ format.format.height = -1;
+ format.which = fse->which;
+ isif_try_format(isif, cfg, &format);
+ fse->max_width = format.format.width;
+ fse->max_height = format.format.height;
+
+ return 0;
+}
+
+/*
+ * isif_enum_mbus_code() - enum mbus codes for pads
+ * @sd: VPFE isif V4L2 subdevice
+ * @cfg: V4L2 subdev pad config
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ */
+static int
+isif_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ switch (code->pad) {
+ case ISIF_PAD_SINK:
+ case ISIF_PAD_SOURCE:
+ if (code->index >= ARRAY_SIZE(isif_fmts))
+ return -EINVAL;
+ code->code = isif_fmts[code->index];
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * isif_pad_set_selection() - set crop rectangle on pad
+ * @sd: VPFE isif V4L2 subdevice
+ * @cfg: V4L2 subdev pad config
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ *
+ * Return 0 on success, -EINVAL if pad is invalid
+ */
+static int
+isif_pad_set_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ /* check whether it's a valid pad and target */
+ if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ format = __isif_get_format(vpfe_isif, cfg, sel->pad, sel->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ /* check wether crop rect is within limits */
+ if (sel->r.top < 0 || sel->r.left < 0 ||
+ (sel->r.left + sel->r.width >
+ vpfe_isif->formats[ISIF_PAD_SINK].width) ||
+ (sel->r.top + sel->r.height >
+ vpfe_isif->formats[ISIF_PAD_SINK].height)) {
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = format->width;
+ sel->r.height = format->height;
+ }
+ /* adjust the width to 16 pixel boundary */
+ sel->r.width = ((sel->r.width + 15) & ~0xf);
+ vpfe_isif->crop = sel->r;
+ if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ isif_set_image_window(vpfe_isif);
+ } else {
+ struct v4l2_rect *rect;
+
+ rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK);
+ memcpy(rect, &vpfe_isif->crop, sizeof(*rect));
+ }
+ return 0;
+}
+
+/*
+ * isif_pad_get_selection() - get crop rectangle on pad
+ * @sd: VPFE isif V4L2 subdevice
+ * @cfg: V4L2 subdev pad config
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ *
+ * Return 0 on success, -EINVAL if pad is invalid
+ */
+static int
+isif_pad_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd);
+
+ /* check whether it's a valid pad and target */
+ if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_rect *rect;
+
+ rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK);
+ memcpy(&sel->r, rect, sizeof(*rect));
+ } else {
+ sel->r = vpfe_isif->crop;
+ }
+
+ return 0;
+}
+
+/*
+ * isif_init_formats() - Initialize formats on all pads
+ * @sd: VPFE isif V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. Try formats are initialized
+ * on the file handle.
+ */
+static int
+isif_init_formats(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format;
+ struct v4l2_subdev_selection sel;
+
+ memset(&format, 0, sizeof(format));
+ format.pad = ISIF_PAD_SINK;
+ format.which = V4L2_SUBDEV_FORMAT_TRY;
+ format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
+ format.format.width = MAX_WIDTH;
+ format.format.height = MAX_HEIGHT;
+ isif_set_format(sd, fh->pad, &format);
+
+ memset(&format, 0, sizeof(format));
+ format.pad = ISIF_PAD_SOURCE;
+ format.which = V4L2_SUBDEV_FORMAT_TRY;
+ format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
+ format.format.width = MAX_WIDTH;
+ format.format.height = MAX_HEIGHT;
+ isif_set_format(sd, fh->pad, &format);
+
+ memset(&sel, 0, sizeof(sel));
+ sel.pad = ISIF_PAD_SINK;
+ sel.which = V4L2_SUBDEV_FORMAT_TRY;
+ sel.target = V4L2_SEL_TGT_CROP;
+ sel.r.width = MAX_WIDTH;
+ sel.r.height = MAX_HEIGHT;
+ isif_pad_set_selection(sd, fh->pad, &sel);
+
+ return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops isif_v4l2_core_ops = {
+ .ioctl = isif_ioctl,
+};
+
+/* subdev file operations */
+static const struct v4l2_subdev_internal_ops isif_v4l2_internal_ops = {
+ .open = isif_init_formats,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops isif_v4l2_video_ops = {
+ .s_stream = isif_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops isif_v4l2_pad_ops = {
+ .enum_mbus_code = isif_enum_mbus_code,
+ .enum_frame_size = isif_enum_frame_size,
+ .get_fmt = isif_get_format,
+ .set_fmt = isif_set_format,
+ .set_selection = isif_pad_set_selection,
+ .get_selection = isif_pad_get_selection,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops isif_v4l2_ops = {
+ .core = &isif_v4l2_core_ops,
+ .video = &isif_v4l2_video_ops,
+ .pad = &isif_v4l2_pad_ops,
+};
+
+/*
+ * Media entity operations
+ */
+
+/*
+ * isif_link_setup() - Setup isif connections
+ * @entity: isif media entity
+ * @local: Pad at the local end of the link
+ * @remote: Pad at the remote end of the link
+ * @flags: Link flags
+ *
+ * return -EINVAL or zero on success
+ */
+static int
+isif_link_setup(struct media_entity *entity, const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd);
+
+ switch (local->index | media_entity_type(remote->entity)) {
+ case ISIF_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+ /* read from decoder/sensor */
+ if (!(flags & MEDIA_LNK_FL_ENABLED)) {
+ isif->input = ISIF_INPUT_NONE;
+ break;
+ }
+ if (isif->input != ISIF_INPUT_NONE)
+ return -EBUSY;
+ isif->input = ISIF_INPUT_PARALLEL;
+ break;
+
+ case ISIF_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+ /* write to memory */
+ if (flags & MEDIA_LNK_FL_ENABLED)
+ isif->output = ISIF_OUTPUT_MEMORY;
+ else
+ isif->output = ISIF_OUTPUT_NONE;
+ break;
+
+ case ISIF_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+ if (flags & MEDIA_LNK_FL_ENABLED)
+ isif->output = ISIF_OUTPUT_IPIPEIF;
+ else
+ isif->output = ISIF_OUTPUT_NONE;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+static const struct media_entity_operations isif_media_ops = {
+ .link_setup = isif_link_setup,
+};
+
+/*
+ * vpfe_isif_unregister_entities() - isif unregister entity
+ * @isif - pointer to isif subdevice structure.
+ */
+void vpfe_isif_unregister_entities(struct vpfe_isif_device *isif)
+{
+ vpfe_video_unregister(&isif->video_out);
+ /* unregister subdev */
+ v4l2_device_unregister_subdev(&isif->subdev);
+ /* cleanup entity */
+ media_entity_cleanup(&isif->subdev.entity);
+}
+
+static void isif_restore_defaults(struct vpfe_isif_device *isif)
+{
+ enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
+ int i;
+
+ memset(&isif->isif_cfg.bayer.config_params, 0,
+ sizeof(struct vpfe_isif_raw_config));
+
+ isif->isif_cfg.bayer.config_params.linearize.corr_shft =
+ VPFE_ISIF_NO_SHIFT;
+ isif->isif_cfg.bayer.config_params.linearize.scale_fact.integer = 1;
+ isif->isif_cfg.bayer.config_params.culling.hcpat_odd =
+ ISIF_CULLING_HCAPT_ODD;
+ isif->isif_cfg.bayer.config_params.culling.hcpat_even =
+ ISIF_CULLING_HCAPT_EVEN;
+ isif->isif_cfg.bayer.config_params.culling.vcpat = ISIF_CULLING_VCAPT;
+ /* Enable clock to ISIF, IPIPEIF and BL */
+ vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
+ vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
+ vpss_enable_clock(VPSS_BL_CLOCK, 1);
+
+ /* set all registers to default value */
+ for (i = 0; i <= 0x1f8; i += 4)
+ isif_write(isif->isif_cfg.base_addr, 0, i);
+ /* no culling support */
+ isif_write(isif->isif_cfg.base_addr, 0xffff, CULH);
+ isif_write(isif->isif_cfg.base_addr, 0xff, CULV);
+
+ /* Set default offset and gain */
+ isif_config_gain_offset(isif);
+ vpss_select_ccdc_source(source);
+}
+
+/*
+ * vpfe_isif_register_entities() - isif register entity
+ * @isif - pointer to isif subdevice structure.
+ * @vdev: pointer to v4l2 device structure.
+ */
+int vpfe_isif_register_entities(struct vpfe_isif_device *isif,
+ struct v4l2_device *vdev)
+{
+ struct vpfe_device *vpfe_dev = to_vpfe_device(isif);
+ unsigned int flags;
+ int ret;
+
+ /* Register the subdev */
+ ret = v4l2_device_register_subdev(vdev, &isif->subdev);
+ if (ret < 0)
+ return ret;
+
+ isif_restore_defaults(isif);
+ ret = vpfe_video_register(&isif->video_out, vdev);
+ if (ret) {
+ pr_err("Failed to register isif video out device\n");
+ goto out_video_register;
+ }
+ isif->video_out.vpfe_dev = vpfe_dev;
+ flags = 0;
+ /* connect isif to video node */
+ ret = media_entity_create_link(&isif->subdev.entity, 1,
+ &isif->video_out.video_dev.entity,
+ 0, flags);
+ if (ret < 0)
+ goto out_create_link;
+ return 0;
+out_create_link:
+ vpfe_video_unregister(&isif->video_out);
+out_video_register:
+ v4l2_device_unregister_subdev(&isif->subdev);
+ return ret;
+}
+
+/* -------------------------------------------------------------------
+ * V4L2 subdev control operations
+ */
+
+static int vpfe_isif_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct vpfe_isif_device *isif =
+ container_of(ctrl->handler, struct vpfe_isif_device, ctrls);
+ struct isif_oper_config *config = &isif->isif_cfg;
+
+ switch (ctrl->id) {
+ case VPFE_CID_DPCM_PREDICTOR:
+ config->bayer.dpcm_predictor = ctrl->val;
+ break;
+
+ case VPFE_ISIF_CID_CRGAIN:
+ config->isif_gain_params.cr_gain = ctrl->val;
+ break;
+
+ case VPFE_ISIF_CID_CGRGAIN:
+ config->isif_gain_params.cgr_gain = ctrl->val;
+ break;
+
+ case VPFE_ISIF_CID_CGBGAIN:
+ config->isif_gain_params.cgb_gain = ctrl->val;
+ break;
+
+ case VPFE_ISIF_CID_CBGAIN:
+ config->isif_gain_params.cb_gain = ctrl->val;
+ break;
+
+ case VPFE_ISIF_CID_GAIN_OFFSET:
+ config->isif_gain_params.offset = ctrl->val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops vpfe_isif_ctrl_ops = {
+ .s_ctrl = vpfe_isif_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_dpcm_pred = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_CID_DPCM_PREDICTOR,
+ .name = "DPCM Predictor",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = 1,
+ .step = 1,
+ .def = 0,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_crgain = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_ISIF_CID_CRGAIN,
+ .name = "CRGAIN",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = (1 << 12) - 1,
+ .step = 1,
+ .def = 0,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_cgrgain = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_ISIF_CID_CGRGAIN,
+ .name = "CGRGAIN",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = (1 << 12) - 1,
+ .step = 1,
+ .def = 0,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_cgbgain = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_ISIF_CID_CGBGAIN,
+ .name = "CGBGAIN",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = (1 << 12) - 1,
+ .step = 1,
+ .def = 0,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_cbgain = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_ISIF_CID_CBGAIN,
+ .name = "CBGAIN",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = (1 << 12) - 1,
+ .step = 1,
+ .def = 0,
+};
+
+static const struct v4l2_ctrl_config vpfe_isif_gain_offset = {
+ .ops = &vpfe_isif_ctrl_ops,
+ .id = VPFE_ISIF_CID_GAIN_OFFSET,
+ .name = "Gain Offset",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = 0,
+ .max = (1 << 12) - 1,
+ .step = 1,
+ .def = 0,
+};
+
+static void isif_remove(struct vpfe_isif_device *isif,
+ struct platform_device *pdev)
+{
+ struct resource *res;
+ int i = 0;
+
+ iounmap(isif->isif_cfg.base_addr);
+ iounmap(isif->isif_cfg.linear_tbl0_addr);
+ iounmap(isif->isif_cfg.linear_tbl1_addr);
+
+ while (i < 3) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (res)
+ release_mem_region(res->start,
+ resource_size(res));
+ i++;
+ }
+}
+
+static void isif_config_defaults(struct vpfe_isif_device *isif)
+{
+ isif->isif_cfg.ycbcr.v4l2_pix_fmt = V4L2_PIX_FMT_UYVY;
+ isif->isif_cfg.ycbcr.pix_fmt = ISIF_PIXFMT_YCBCR_8BIT;
+ isif->isif_cfg.ycbcr.frm_fmt = ISIF_FRMFMT_INTERLACED;
+ isif->isif_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY;
+ isif->isif_cfg.ycbcr.buf_type = ISIF_BUFTYPE_FLD_INTERLEAVED;
+
+ isif->isif_cfg.bayer.v4l2_pix_fmt = V4L2_PIX_FMT_SGRBG10ALAW8;
+ isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW;
+ isif->isif_cfg.bayer.frm_fmt = ISIF_FRMFMT_PROGRESSIVE;
+ isif->isif_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE;
+ isif->isif_cfg.bayer.cfa_pat = ISIF_CFA_PAT_MOSAIC;
+ isif->isif_cfg.bayer.data_msb = ISIF_BIT_MSB_11;
+ isif->isif_cfg.data_pack = ISIF_PACK_8BIT;
+}
+/*
+ * vpfe_isif_init() - Initialize V4L2 subdev and media entity
+ * @isif: VPFE isif module
+ * @pdev: Pointer to platform device structure.
+ * Return 0 on success and a negative error code on failure.
+ */
+int vpfe_isif_init(struct vpfe_isif_device *isif, struct platform_device *pdev)
+{
+ struct v4l2_subdev *sd = &isif->subdev;
+ struct media_pad *pads = &isif->pads[0];
+ struct media_entity *me = &sd->entity;
+ static resource_size_t res_len;
+ struct resource *res;
+ void __iomem *addr;
+ int status;
+ int i = 0;
+
+ /* Get the ISIF base address, linearization table0 and table1 addr. */
+ while (i < 3) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res) {
+ status = -ENOENT;
+ goto fail_nobase_res;
+ }
+ res_len = resource_size(res);
+ res = request_mem_region(res->start, res_len, res->name);
+ if (!res) {
+ status = -EBUSY;
+ goto fail_nobase_res;
+ }
+ addr = ioremap_nocache(res->start, res_len);
+ if (!addr) {
+ status = -EBUSY;
+ goto fail_base_iomap;
+ }
+ switch (i) {
+ case 0:
+ /* ISIF base address */
+ isif->isif_cfg.base_addr = addr;
+ break;
+ case 1:
+ /* ISIF linear tbl0 address */
+ isif->isif_cfg.linear_tbl0_addr = addr;
+ break;
+ default:
+ /* ISIF linear tbl0 address */
+ isif->isif_cfg.linear_tbl1_addr = addr;
+ break;
+ }
+ i++;
+ }
+ davinci_cfg_reg(DM365_VIN_CAM_WEN);
+ davinci_cfg_reg(DM365_VIN_CAM_VD);
+ davinci_cfg_reg(DM365_VIN_CAM_HD);
+ davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
+ davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
+
+ /* queue ops */
+ isif->video_out.ops = &isif_video_ops;
+ v4l2_subdev_init(sd, &isif_v4l2_ops);
+ sd->internal_ops = &isif_v4l2_internal_ops;
+ strlcpy(sd->name, "DAVINCI ISIF", sizeof(sd->name));
+ sd->grp_id = 1 << 16; /* group ID for davinci subdevs */
+ v4l2_set_subdevdata(sd, isif);
+ sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
+ pads[ISIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[ISIF_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+ isif->input = ISIF_INPUT_NONE;
+ isif->output = ISIF_OUTPUT_NONE;
+ me->ops = &isif_media_ops;
+ status = media_entity_init(me, ISIF_PADS_NUM, pads, 0);
+ if (status)
+ goto isif_fail;
+ isif->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ status = vpfe_video_init(&isif->video_out, "ISIF");
+ if (status) {
+ pr_err("Failed to init isif-out video device\n");
+ goto isif_fail;
+ }
+ v4l2_ctrl_handler_init(&isif->ctrls, 6);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_crgain, NULL);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgrgain, NULL);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgbgain, NULL);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cbgain, NULL);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_gain_offset, NULL);
+ v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_dpcm_pred, NULL);
+
+ v4l2_ctrl_handler_setup(&isif->ctrls);
+ sd->ctrl_handler = &isif->ctrls;
+ isif_config_defaults(isif);
+ return 0;
+fail_base_iomap:
+ release_mem_region(res->start, res_len);
+ i--;
+fail_nobase_res:
+ if (isif->isif_cfg.base_addr)
+ iounmap(isif->isif_cfg.base_addr);
+ if (isif->isif_cfg.linear_tbl0_addr)
+ iounmap(isif->isif_cfg.linear_tbl0_addr);
+
+ while (i >= 0) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ release_mem_region(res->start, res_len);
+ i--;
+ }
+ return status;
+isif_fail:
+ v4l2_ctrl_handler_free(&isif->ctrls);
+ isif_remove(isif, pdev);
+ return status;
+}
+
+/*
+ * vpfe_isif_cleanup - isif module cleanup
+ * @isif: pointer to isif subdevice
+ * @dev: pointer to platform device structure
+ */
+void
+vpfe_isif_cleanup(struct vpfe_isif_device *isif, struct platform_device *pdev)
+{
+ isif_remove(isif, pdev);
+}
Code Review / kvmfornfv.git / blobdiff