+++ /dev/null
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include "i2o.h"
-
-static void i2o_report_util_cmd(u8 cmd);
-static void i2o_report_exec_cmd(u8 cmd);
-static void i2o_report_fail_status(u8 req_status, u32 *msg);
-static void i2o_report_common_status(u8 req_status);
-static void i2o_report_common_dsc(u16 detailed_status);
-
-/*
- * Used for error reporting/debugging purposes.
- * Report Cmd name, Request status, Detailed Status.
- */
-void i2o_report_status(const char *severity, const char *str,
- struct i2o_message *m)
-{
- u32 *msg = (u32 *) m;
- u8 cmd = (msg[1] >> 24) & 0xFF;
- u8 req_status = (msg[4] >> 24) & 0xFF;
- u16 detailed_status = msg[4] & 0xFFFF;
-
- if (cmd == I2O_CMD_UTIL_EVT_REGISTER)
- return; /* No status in this reply */
-
- printk("%s%s: ", severity, str);
-
- if (cmd < 0x1F) // Utility cmd
- i2o_report_util_cmd(cmd);
-
- else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd
- i2o_report_exec_cmd(cmd);
- else
- printk("Cmd = %0#2x, ", cmd); // Other cmds
-
- if (msg[0] & MSG_FAIL) {
- i2o_report_fail_status(req_status, msg);
- return;
- }
-
- i2o_report_common_status(req_status);
-
- if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF))
- i2o_report_common_dsc(detailed_status);
- else
- printk(" / DetailedStatus = %0#4x.\n",
- detailed_status);
-}
-
-/* Used to dump a message to syslog during debugging */
-void i2o_dump_message(struct i2o_message *m)
-{
-#ifdef DEBUG
- u32 *msg = (u32 *) m;
- int i;
-
- printk(KERN_INFO "Dumping I2O message size %d @ %p\n",
- msg[0] >> 16 & 0xffff, msg);
- for (i = 0; i < ((msg[0] >> 16) & 0xffff); i++)
- printk(KERN_INFO " msg[%d] = %0#10x\n", i, msg[i]);
-#endif
-}
-
-/*
- * Used for error reporting/debugging purposes.
- * Following fail status are common to all classes.
- * The preserved message must be handled in the reply handler.
- */
-static void i2o_report_fail_status(u8 req_status, u32 *msg)
-{
- static char *FAIL_STATUS[] = {
- "0x80", /* not used */
- "SERVICE_SUSPENDED", /* 0x81 */
- "SERVICE_TERMINATED", /* 0x82 */
- "CONGESTION",
- "FAILURE",
- "STATE_ERROR",
- "TIME_OUT",
- "ROUTING_FAILURE",
- "INVALID_VERSION",
- "INVALID_OFFSET",
- "INVALID_MSG_FLAGS",
- "FRAME_TOO_SMALL",
- "FRAME_TOO_LARGE",
- "INVALID_TARGET_ID",
- "INVALID_INITIATOR_ID",
- "INVALID_INITIATOR_CONTEX", /* 0x8F */
- "UNKNOWN_FAILURE" /* 0xFF */
- };
-
- if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
- printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
- req_status);
- else
- printk("TRANSPORT_%s.\n",
- FAIL_STATUS[req_status & 0x0F]);
-
- /* Dump some details */
-
- printk(KERN_ERR " InitiatorId = %d, TargetId = %d\n",
- (msg[1] >> 12) & 0xFFF, msg[1] & 0xFFF);
- printk(KERN_ERR " LowestVersion = 0x%02X, HighestVersion = 0x%02X\n",
- (msg[4] >> 8) & 0xFF, msg[4] & 0xFF);
- printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n",
- msg[5] >> 16, msg[5] & 0xFFF);
-
- printk(KERN_ERR " Severity: 0x%02X\n", (msg[4] >> 16) & 0xFF);
- if (msg[4] & (1 << 16))
- printk(KERN_DEBUG "(FormatError), "
- "this msg can never be delivered/processed.\n");
- if (msg[4] & (1 << 17))
- printk(KERN_DEBUG "(PathError), "
- "this msg can no longer be delivered/processed.\n");
- if (msg[4] & (1 << 18))
- printk(KERN_DEBUG "(PathState), "
- "the system state does not allow delivery.\n");
- if (msg[4] & (1 << 19))
- printk(KERN_DEBUG
- "(Congestion), resources temporarily not available;"
- "do not retry immediately.\n");
-}
-
-/*
- * Used for error reporting/debugging purposes.
- * Following reply status are common to all classes.
- */
-static void i2o_report_common_status(u8 req_status)
-{
- static char *REPLY_STATUS[] = {
- "SUCCESS",
- "ABORT_DIRTY",
- "ABORT_NO_DATA_TRANSFER",
- "ABORT_PARTIAL_TRANSFER",
- "ERROR_DIRTY",
- "ERROR_NO_DATA_TRANSFER",
- "ERROR_PARTIAL_TRANSFER",
- "PROCESS_ABORT_DIRTY",
- "PROCESS_ABORT_NO_DATA_TRANSFER",
- "PROCESS_ABORT_PARTIAL_TRANSFER",
- "TRANSACTION_ERROR",
- "PROGRESS_REPORT"
- };
-
- if (req_status >= ARRAY_SIZE(REPLY_STATUS))
- printk("RequestStatus = %0#2x", req_status);
- else
- printk("%s", REPLY_STATUS[req_status]);
-}
-
-/*
- * Used for error reporting/debugging purposes.
- * Following detailed status are valid for executive class,
- * utility class, DDM class and for transaction error replies.
- */
-static void i2o_report_common_dsc(u16 detailed_status)
-{
- static char *COMMON_DSC[] = {
- "SUCCESS",
- "0x01", // not used
- "BAD_KEY",
- "TCL_ERROR",
- "REPLY_BUFFER_FULL",
- "NO_SUCH_PAGE",
- "INSUFFICIENT_RESOURCE_SOFT",
- "INSUFFICIENT_RESOURCE_HARD",
- "0x08", // not used
- "CHAIN_BUFFER_TOO_LARGE",
- "UNSUPPORTED_FUNCTION",
- "DEVICE_LOCKED",
- "DEVICE_RESET",
- "INAPPROPRIATE_FUNCTION",
- "INVALID_INITIATOR_ADDRESS",
- "INVALID_MESSAGE_FLAGS",
- "INVALID_OFFSET",
- "INVALID_PARAMETER",
- "INVALID_REQUEST",
- "INVALID_TARGET_ADDRESS",
- "MESSAGE_TOO_LARGE",
- "MESSAGE_TOO_SMALL",
- "MISSING_PARAMETER",
- "TIMEOUT",
- "UNKNOWN_ERROR",
- "UNKNOWN_FUNCTION",
- "UNSUPPORTED_VERSION",
- "DEVICE_BUSY",
- "DEVICE_NOT_AVAILABLE"
- };
-
- if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE)
- printk(" / DetailedStatus = %0#4x.\n",
- detailed_status);
- else
- printk(" / %s.\n", COMMON_DSC[detailed_status]);
-}
-
-/*
- * Used for error reporting/debugging purposes
- */
-static void i2o_report_util_cmd(u8 cmd)
-{
- switch (cmd) {
- case I2O_CMD_UTIL_NOP:
- printk("UTIL_NOP, ");
- break;
- case I2O_CMD_UTIL_ABORT:
- printk("UTIL_ABORT, ");
- break;
- case I2O_CMD_UTIL_CLAIM:
- printk("UTIL_CLAIM, ");
- break;
- case I2O_CMD_UTIL_RELEASE:
- printk("UTIL_CLAIM_RELEASE, ");
- break;
- case I2O_CMD_UTIL_CONFIG_DIALOG:
- printk("UTIL_CONFIG_DIALOG, ");
- break;
- case I2O_CMD_UTIL_DEVICE_RESERVE:
- printk("UTIL_DEVICE_RESERVE, ");
- break;
- case I2O_CMD_UTIL_DEVICE_RELEASE:
- printk("UTIL_DEVICE_RELEASE, ");
- break;
- case I2O_CMD_UTIL_EVT_ACK:
- printk("UTIL_EVENT_ACKNOWLEDGE, ");
- break;
- case I2O_CMD_UTIL_EVT_REGISTER:
- printk("UTIL_EVENT_REGISTER, ");
- break;
- case I2O_CMD_UTIL_LOCK:
- printk("UTIL_LOCK, ");
- break;
- case I2O_CMD_UTIL_LOCK_RELEASE:
- printk("UTIL_LOCK_RELEASE, ");
- break;
- case I2O_CMD_UTIL_PARAMS_GET:
- printk("UTIL_PARAMS_GET, ");
- break;
- case I2O_CMD_UTIL_PARAMS_SET:
- printk("UTIL_PARAMS_SET, ");
- break;
- case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY:
- printk("UTIL_REPLY_FAULT_NOTIFY, ");
- break;
- default:
- printk("Cmd = %0#2x, ", cmd);
- }
-}
-
-/*
- * Used for error reporting/debugging purposes
- */
-static void i2o_report_exec_cmd(u8 cmd)
-{
- switch (cmd) {
- case I2O_CMD_ADAPTER_ASSIGN:
- printk("EXEC_ADAPTER_ASSIGN, ");
- break;
- case I2O_CMD_ADAPTER_READ:
- printk("EXEC_ADAPTER_READ, ");
- break;
- case I2O_CMD_ADAPTER_RELEASE:
- printk("EXEC_ADAPTER_RELEASE, ");
- break;
- case I2O_CMD_BIOS_INFO_SET:
- printk("EXEC_BIOS_INFO_SET, ");
- break;
- case I2O_CMD_BOOT_DEVICE_SET:
- printk("EXEC_BOOT_DEVICE_SET, ");
- break;
- case I2O_CMD_CONFIG_VALIDATE:
- printk("EXEC_CONFIG_VALIDATE, ");
- break;
- case I2O_CMD_CONN_SETUP:
- printk("EXEC_CONN_SETUP, ");
- break;
- case I2O_CMD_DDM_DESTROY:
- printk("EXEC_DDM_DESTROY, ");
- break;
- case I2O_CMD_DDM_ENABLE:
- printk("EXEC_DDM_ENABLE, ");
- break;
- case I2O_CMD_DDM_QUIESCE:
- printk("EXEC_DDM_QUIESCE, ");
- break;
- case I2O_CMD_DDM_RESET:
- printk("EXEC_DDM_RESET, ");
- break;
- case I2O_CMD_DDM_SUSPEND:
- printk("EXEC_DDM_SUSPEND, ");
- break;
- case I2O_CMD_DEVICE_ASSIGN:
- printk("EXEC_DEVICE_ASSIGN, ");
- break;
- case I2O_CMD_DEVICE_RELEASE:
- printk("EXEC_DEVICE_RELEASE, ");
- break;
- case I2O_CMD_HRT_GET:
- printk("EXEC_HRT_GET, ");
- break;
- case I2O_CMD_ADAPTER_CLEAR:
- printk("EXEC_IOP_CLEAR, ");
- break;
- case I2O_CMD_ADAPTER_CONNECT:
- printk("EXEC_IOP_CONNECT, ");
- break;
- case I2O_CMD_ADAPTER_RESET:
- printk("EXEC_IOP_RESET, ");
- break;
- case I2O_CMD_LCT_NOTIFY:
- printk("EXEC_LCT_NOTIFY, ");
- break;
- case I2O_CMD_OUTBOUND_INIT:
- printk("EXEC_OUTBOUND_INIT, ");
- break;
- case I2O_CMD_PATH_ENABLE:
- printk("EXEC_PATH_ENABLE, ");
- break;
- case I2O_CMD_PATH_QUIESCE:
- printk("EXEC_PATH_QUIESCE, ");
- break;
- case I2O_CMD_PATH_RESET:
- printk("EXEC_PATH_RESET, ");
- break;
- case I2O_CMD_STATIC_MF_CREATE:
- printk("EXEC_STATIC_MF_CREATE, ");
- break;
- case I2O_CMD_STATIC_MF_RELEASE:
- printk("EXEC_STATIC_MF_RELEASE, ");
- break;
- case I2O_CMD_STATUS_GET:
- printk("EXEC_STATUS_GET, ");
- break;
- case I2O_CMD_SW_DOWNLOAD:
- printk("EXEC_SW_DOWNLOAD, ");
- break;
- case I2O_CMD_SW_UPLOAD:
- printk("EXEC_SW_UPLOAD, ");
- break;
- case I2O_CMD_SW_REMOVE:
- printk("EXEC_SW_REMOVE, ");
- break;
- case I2O_CMD_SYS_ENABLE:
- printk("EXEC_SYS_ENABLE, ");
- break;
- case I2O_CMD_SYS_MODIFY:
- printk("EXEC_SYS_MODIFY, ");
- break;
- case I2O_CMD_SYS_QUIESCE:
- printk("EXEC_SYS_QUIESCE, ");
- break;
- case I2O_CMD_SYS_TAB_SET:
- printk("EXEC_SYS_TAB_SET, ");
- break;
- default:
- printk("Cmd = %#02x, ", cmd);
- }
-}
-
-void i2o_debug_state(struct i2o_controller *c)
-{
- printk(KERN_INFO "%s: State = ", c->name);
- switch (((i2o_status_block *) c->status_block.virt)->iop_state) {
- case 0x01:
- printk("INIT\n");
- break;
- case 0x02:
- printk("RESET\n");
- break;
- case 0x04:
- printk("HOLD\n");
- break;
- case 0x05:
- printk("READY\n");
- break;
- case 0x08:
- printk("OPERATIONAL\n");
- break;
- case 0x10:
- printk("FAILED\n");
- break;
- case 0x11:
- printk("FAULTED\n");
- break;
- default:
- printk("%x (unknown !!)\n",
- ((i2o_status_block *) c->status_block.virt)->iop_state);
- }
-};
-
-void i2o_dump_hrt(struct i2o_controller *c)
-{
- u32 *rows = (u32 *) c->hrt.virt;
- u8 *p = (u8 *) c->hrt.virt;
- u8 *d;
- int count;
- int length;
- int i;
- int state;
-
- if (p[3] != 0) {
- printk(KERN_ERR
- "%s: HRT table for controller is too new a version.\n",
- c->name);
- return;
- }
-
- count = p[0] | (p[1] << 8);
- length = p[2];
-
- printk(KERN_INFO "%s: HRT has %d entries of %d bytes each.\n",
- c->name, count, length << 2);
-
- rows += 2;
-
- for (i = 0; i < count; i++) {
- printk(KERN_INFO "Adapter %08X: ", rows[0]);
- p = (u8 *) (rows + 1);
- d = (u8 *) (rows + 2);
- state = p[1] << 8 | p[0];
-
- printk("TID %04X:[", state & 0xFFF);
- state >>= 12;
- if (state & (1 << 0))
- printk("H"); /* Hidden */
- if (state & (1 << 2)) {
- printk("P"); /* Present */
- if (state & (1 << 1))
- printk("C"); /* Controlled */
- }
- if (state > 9)
- printk("*"); /* Hard */
-
- printk("]:");
-
- switch (p[3] & 0xFFFF) {
- case 0:
- /* Adapter private bus - easy */
- printk("Local bus %d: I/O at 0x%04X Mem 0x%08X", p[2],
- d[1] << 8 | d[0], *(u32 *) (d + 4));
- break;
- case 1:
- /* ISA bus */
- printk("ISA %d: CSN %d I/O at 0x%04X Mem 0x%08X", p[2],
- d[2], d[1] << 8 | d[0], *(u32 *) (d + 4));
- break;
-
- case 2: /* EISA bus */
- printk("EISA %d: Slot %d I/O at 0x%04X Mem 0x%08X",
- p[2], d[3], d[1] << 8 | d[0], *(u32 *) (d + 4));
- break;
-
- case 3: /* MCA bus */
- printk("MCA %d: Slot %d I/O at 0x%04X Mem 0x%08X", p[2],
- d[3], d[1] << 8 | d[0], *(u32 *) (d + 4));
- break;
-
- case 4: /* PCI bus */
- printk("PCI %d: Bus %d Device %d Function %d", p[2],
- d[2], d[1], d[0]);
- break;
-
- case 0x80: /* Other */
- default:
- printk("Unsupported bus type.");
- break;
- }
- printk("\n");
- rows += length;
- }
-}
-
-EXPORT_SYMBOL(i2o_dump_message);
Code Review / kvmfornfv.git / blobdiff