--- /dev/null
+/*
+ comedi/drivers/amplc_pc263.c
+ Driver for Amplicon PC263 and PCI263 relay boards.
+
+ Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/>
+
+ COMEDI - Linux Control and Measurement Device Interface
+ Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+/*
+Driver: amplc_pc263
+Description: Amplicon PC263
+Author: Ian Abbott <abbotti@mev.co.uk>
+Devices: [Amplicon] PC263 (pc263)
+Updated: Fri, 12 Apr 2013 15:19:36 +0100
+Status: works
+
+Configuration options:
+ [0] - I/O port base address
+
+The board appears as one subdevice, with 16 digital outputs, each
+connected to a reed-relay. Relay contacts are closed when output is 1.
+The state of the outputs can be read.
+*/
+
+#include <linux/module.h>
+#include "../comedidev.h"
+
+/* PC263 registers */
+
+/*
+ * Board descriptions for Amplicon PC263.
+ */
+
+struct pc263_board {
+ const char *name;
+};
+
+static const struct pc263_board pc263_boards[] = {
+ {
+ .name = "pc263",
+ },
+};
+
+static int pc263_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ if (comedi_dio_update_state(s, data)) {
+ outb(s->state & 0xff, dev->iobase);
+ outb((s->state >> 8) & 0xff, dev->iobase + 1);
+ }
+
+ data[1] = s->state;
+
+ return insn->n;
+}
+
+static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+ struct comedi_subdevice *s;
+ int ret;
+
+ ret = comedi_request_region(dev, it->options[0], 0x2);
+ if (ret)
+ return ret;
+
+ ret = comedi_alloc_subdevices(dev, 1);
+ if (ret)
+ return ret;
+
+ s = &dev->subdevices[0];
+ /* digital output subdevice */
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 16;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = pc263_do_insn_bits;
+ /* read initial relay state */
+ s->state = inb(dev->iobase) | (inb(dev->iobase + 1) << 8);
+
+ return 0;
+}
+
+static struct comedi_driver amplc_pc263_driver = {
+ .driver_name = "amplc_pc263",
+ .module = THIS_MODULE,
+ .attach = pc263_attach,
+ .detach = comedi_legacy_detach,
+ .board_name = &pc263_boards[0].name,
+ .offset = sizeof(struct pc263_board),
+ .num_names = ARRAY_SIZE(pc263_boards),
+};
+
+module_comedi_driver(amplc_pc263_driver);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi driver for Amplicon PC263 relay board");
+MODULE_LICENSE("GPL");