--- /dev/null
+/*
+ * COMEDI driver for the ADLINK PCI-723x/743x series boards.
+ * Copyright (C) 2012 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on the adl_pci7230 driver written by:
+ * David Fernandez <dfcastelao@gmail.com>
+ * and the adl_pci7432 driver written by:
+ * Michel Lachaine <mike@mikelachaine.ca>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Driver: adl_pci7x3x
+ * Description: 32/64-Channel Isolated Digital I/O Boards
+ * Devices: [ADLink] PCI-7230 (adl_pci7230), PCI-7233 (adl_pci7233),
+ * PCI-7234 (adl_pci7234), PCI-7432 (adl_pci7432), PCI-7433 (adl_pci7433),
+ * PCI-7434 (adl_pci7434)
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Thu, 02 Aug 2012 14:27:46 -0700
+ * Status: untested
+ *
+ * One or two subdevices are setup by this driver depending on
+ * the number of digital inputs and/or outputs provided by the
+ * board. Each subdevice has a maximum of 32 channels.
+ *
+ * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
+ * PCI-7233 - 1 subdevice: 0 - 32 input
+ * PCI-7234 - 1 subdevice: 0 - 32 output
+ * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
+ * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
+ * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
+ *
+ * The PCI-7230, PCI-7432 and PCI-7433 boards also support external
+ * interrupt signals on digital input channels 0 and 1. The PCI-7233
+ * has dual-interrupt sources for change-of-state (COS) on any 16
+ * digital input channels of LSB and for COS on any 16 digital input
+ * lines of MSB. Interrupts are not currently supported by this
+ * driver.
+ *
+ * Configuration Options: not applicable, uses comedi PCI auto config
+ */
+
+#include <linux/module.h>
+
+#include "../comedi_pci.h"
+
+/*
+ * Register I/O map (32-bit access only)
+ */
+#define PCI7X3X_DIO_REG 0x00
+#define PCI743X_DIO_REG 0x04
+
+enum apci1516_boardid {
+ BOARD_PCI7230,
+ BOARD_PCI7233,
+ BOARD_PCI7234,
+ BOARD_PCI7432,
+ BOARD_PCI7433,
+ BOARD_PCI7434,
+};
+
+struct adl_pci7x3x_boardinfo {
+ const char *name;
+ int nsubdevs;
+ int di_nchan;
+ int do_nchan;
+};
+
+static const struct adl_pci7x3x_boardinfo adl_pci7x3x_boards[] = {
+ [BOARD_PCI7230] = {
+ .name = "adl_pci7230",
+ .nsubdevs = 2,
+ .di_nchan = 16,
+ .do_nchan = 16,
+ },
+ [BOARD_PCI7233] = {
+ .name = "adl_pci7233",
+ .nsubdevs = 1,
+ .di_nchan = 32,
+ },
+ [BOARD_PCI7234] = {
+ .name = "adl_pci7234",
+ .nsubdevs = 1,
+ .do_nchan = 32,
+ },
+ [BOARD_PCI7432] = {
+ .name = "adl_pci7432",
+ .nsubdevs = 2,
+ .di_nchan = 32,
+ .do_nchan = 32,
+ },
+ [BOARD_PCI7433] = {
+ .name = "adl_pci7433",
+ .nsubdevs = 2,
+ .di_nchan = 64,
+ },
+ [BOARD_PCI7434] = {
+ .name = "adl_pci7434",
+ .nsubdevs = 2,
+ .do_nchan = 64,
+ }
+};
+
+static int adl_pci7x3x_do_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned long reg = (unsigned long)s->private;
+
+ if (comedi_dio_update_state(s, data))
+ outl(s->state, dev->iobase + reg);
+
+ data[1] = s->state;
+
+ return insn->n;
+}
+
+static int adl_pci7x3x_di_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned long reg = (unsigned long)s->private;
+
+ data[1] = inl(dev->iobase + reg);
+
+ return insn->n;
+}
+
+static int adl_pci7x3x_auto_attach(struct comedi_device *dev,
+ unsigned long context)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct adl_pci7x3x_boardinfo *board = NULL;
+ struct comedi_subdevice *s;
+ int subdev;
+ int nchan;
+ int ret;
+
+ if (context < ARRAY_SIZE(adl_pci7x3x_boards))
+ board = &adl_pci7x3x_boards[context];
+ if (!board)
+ return -ENODEV;
+ dev->board_ptr = board;
+ dev->board_name = board->name;
+
+ ret = comedi_pci_enable(dev);
+ if (ret)
+ return ret;
+ dev->iobase = pci_resource_start(pcidev, 2);
+
+ ret = comedi_alloc_subdevices(dev, board->nsubdevs);
+ if (ret)
+ return ret;
+
+ subdev = 0;
+
+ if (board->di_nchan) {
+ nchan = min(board->di_nchan, 32);
+
+ s = &dev->subdevices[subdev];
+ /* Isolated digital inputs 0 to 15/31 */
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_di_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI7X3X_DIO_REG;
+
+ subdev++;
+
+ nchan = board->di_nchan - nchan;
+ if (nchan) {
+ s = &dev->subdevices[subdev];
+ /* Isolated digital inputs 32 to 63 */
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_di_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI743X_DIO_REG;
+
+ subdev++;
+ }
+ }
+
+ if (board->do_nchan) {
+ nchan = min(board->do_nchan, 32);
+
+ s = &dev->subdevices[subdev];
+ /* Isolated digital outputs 0 to 15/31 */
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_do_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI7X3X_DIO_REG;
+
+ subdev++;
+
+ nchan = board->do_nchan - nchan;
+ if (nchan) {
+ s = &dev->subdevices[subdev];
+ /* Isolated digital outputs 32 to 63 */
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = nchan;
+ s->maxdata = 1;
+ s->insn_bits = adl_pci7x3x_do_insn_bits;
+ s->range_table = &range_digital;
+
+ s->private = (void *)PCI743X_DIO_REG;
+
+ subdev++;
+ }
+ }
+
+ return 0;
+}
+
+static struct comedi_driver adl_pci7x3x_driver = {
+ .driver_name = "adl_pci7x3x",
+ .module = THIS_MODULE,
+ .auto_attach = adl_pci7x3x_auto_attach,
+ .detach = comedi_pci_detach,
+};
+
+static int adl_pci7x3x_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ return comedi_pci_auto_config(dev, &adl_pci7x3x_driver,
+ id->driver_data);
+}
+
+static const struct pci_device_id adl_pci7x3x_pci_table[] = {
+ { PCI_VDEVICE(ADLINK, 0x7230), BOARD_PCI7230 },
+ { PCI_VDEVICE(ADLINK, 0x7233), BOARD_PCI7233 },
+ { PCI_VDEVICE(ADLINK, 0x7234), BOARD_PCI7234 },
+ { PCI_VDEVICE(ADLINK, 0x7432), BOARD_PCI7432 },
+ { PCI_VDEVICE(ADLINK, 0x7433), BOARD_PCI7433 },
+ { PCI_VDEVICE(ADLINK, 0x7434), BOARD_PCI7434 },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7x3x_pci_table);
+
+static struct pci_driver adl_pci7x3x_pci_driver = {
+ .name = "adl_pci7x3x",
+ .id_table = adl_pci7x3x_pci_table,
+ .probe = adl_pci7x3x_pci_probe,
+ .remove = comedi_pci_auto_unconfig,
+};
+module_comedi_pci_driver(adl_pci7x3x_driver, adl_pci7x3x_pci_driver);
+
+MODULE_DESCRIPTION("ADLINK PCI-723x/743x Isolated Digital I/O boards");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff