--- /dev/null
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/bcm47xx_wdt.h>
+
+#include "ssb_private.h"
+
+
+/* Clock sources */
+enum ssb_clksrc {
+ /* PCI clock */
+ SSB_CHIPCO_CLKSRC_PCI,
+ /* Crystal slow clock oscillator */
+ SSB_CHIPCO_CLKSRC_XTALOS,
+ /* Low power oscillator */
+ SSB_CHIPCO_CLKSRC_LOPWROS,
+};
+
+
+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
+ u32 mask, u32 value)
+{
+ value &= mask;
+ value |= chipco_read32(cc, offset) & ~mask;
+ chipco_write32(cc, offset, value);
+
+ return value;
+}
+
+void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+ enum ssb_clkmode mode)
+{
+ struct ssb_device *ccdev = cc->dev;
+ struct ssb_bus *bus;
+ u32 tmp;
+
+ if (!ccdev)
+ return;
+ bus = ccdev->bus;
+
+ /* We support SLOW only on 6..9 */
+ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
+ mode = SSB_CLKMODE_DYNAMIC;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return; /* PMU controls clockmode, separated function needed */
+ SSB_WARN_ON(ccdev->id.revision >= 20);
+
+ /* chipcommon cores prior to rev6 don't support dynamic clock control */
+ if (ccdev->id.revision < 6)
+ return;
+
+ /* ChipCommon cores rev10+ need testing */
+ if (ccdev->id.revision >= 10)
+ return;
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ switch (mode) {
+ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ break;
+ case SSB_CLKMODE_FAST:
+ if (ccdev->id.revision < 10) {
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
+ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ /* udelay(150); TODO: not available in early init */
+ }
+ break;
+ case SSB_CLKMODE_DYNAMIC:
+ if (ccdev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
+ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+
+ /* For dynamic control, we have to release our xtal_pu
+ * "force on" */
+ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ }
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+}
+
+/* Get the Slow Clock Source */
+static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 uninitialized_var(tmp);
+
+ if (cc->dev->id.revision < 6) {
+ if (bus->bustype == SSB_BUSTYPE_SSB ||
+ bus->bustype == SSB_BUSTYPE_PCMCIA)
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
+ if (tmp & 0x10)
+ return SSB_CHIPCO_CLKSRC_PCI;
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ }
+ }
+ if (cc->dev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= 0x7;
+ if (tmp == 0)
+ return SSB_CHIPCO_CLKSRC_LOPWROS;
+ if (tmp == 1)
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+ if (tmp == 2)
+ return SSB_CHIPCO_CLKSRC_PCI;
+ }
+
+ return SSB_CHIPCO_CLKSRC_XTALOS;
+}
+
+/* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
+static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
+{
+ int uninitialized_var(limit);
+ enum ssb_clksrc clocksrc;
+ int divisor = 1;
+ u32 tmp;
+
+ clocksrc = chipco_pctl_get_slowclksrc(cc);
+ if (cc->dev->id.revision < 6) {
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_PCI:
+ divisor = 64;
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ divisor = 32;
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ } else if (cc->dev->id.revision < 10) {
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_LOPWROS:
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ case SSB_CHIPCO_CLKSRC_PCI:
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ divisor = (tmp >> 16) + 1;
+ divisor *= 4;
+ break;
+ }
+ } else {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
+ divisor = (tmp >> 16) + 1;
+ divisor *= 4;
+ }
+
+ switch (clocksrc) {
+ case SSB_CHIPCO_CLKSRC_LOPWROS:
+ if (get_max)
+ limit = 43000;
+ else
+ limit = 25000;
+ break;
+ case SSB_CHIPCO_CLKSRC_XTALOS:
+ if (get_max)
+ limit = 20200000;
+ else
+ limit = 19800000;
+ break;
+ case SSB_CHIPCO_CLKSRC_PCI:
+ if (get_max)
+ limit = 34000000;
+ else
+ limit = 25000000;
+ break;
+ }
+ limit /= divisor;
+
+ return limit;
+}
+
+static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ if (bus->chip_id == 0x4321) {
+ if (bus->chip_rev == 0)
+ chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
+ else if (bus->chip_rev == 1)
+ chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
+ }
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ if (cc->dev->id.revision >= 10) {
+ /* Set Idle Power clock rate to 1Mhz */
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ 0x0000FFFF) | 0x00040000);
+ } else {
+ int maxfreq;
+
+ maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
+ chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
+ (maxfreq * 150 + 999999) / 1000000);
+ chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
+ (maxfreq * 15 + 999999) / 1000000);
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
+static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ case 0x4322:
+ case 0x4328:
+ return 7000;
+ case 0x4325:
+ /* TODO: */
+ default:
+ return 15000;
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
+static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int minfreq;
+ unsigned int tmp;
+ u32 pll_on_delay;
+
+ if (bus->bustype != SSB_BUSTYPE_PCI)
+ return;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
+ return;
+ }
+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+ return;
+
+ minfreq = chipco_pctl_clockfreqlimit(cc, 0);
+ pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
+ tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
+ SSB_WARN_ON(tmp & ~0xFFFF);
+
+ cc->fast_pwrup_delay = tmp;
+}
+
+static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc)
+{
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_alp_clock(cc);
+
+ return 20000000;
+}
+
+static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc)
+{
+ u32 nb;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ if (cc->dev->id.revision < 26)
+ nb = 16;
+ else
+ nb = (cc->dev->id.revision >= 37) ? 32 : 24;
+ } else {
+ nb = 28;
+ }
+ if (nb == 32)
+ return 0xffffffff;
+ else
+ return (1 << nb) - 1;
+}
+
+u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
+{
+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
+
+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ return ssb_chipco_watchdog_timer_set(cc, ticks);
+}
+
+u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
+{
+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
+ u32 ticks;
+
+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
+ return ticks / cc->ticks_per_ms;
+}
+
+static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ /* based on 32KHz ILP clock */
+ return 32;
+ } else {
+ if (cc->dev->id.revision < 18)
+ return ssb_clockspeed(bus) / 1000;
+ else
+ return ssb_chipco_alp_clock(cc) / 1000;
+ }
+}
+
+void ssb_chipcommon_init(struct ssb_chipcommon *cc)
+{
+ if (!cc->dev)
+ return; /* We don't have a ChipCommon */
+
+ spin_lock_init(&cc->gpio_lock);
+
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+ }
+
+ ssb_pmu_init(cc);
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ calc_fast_powerup_delay(cc);
+
+ if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) {
+ cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc);
+ cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
+ }
+}
+
+void ssb_chipco_suspend(struct ssb_chipcommon *cc)
+{
+ if (!cc->dev)
+ return;
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
+}
+
+void ssb_chipco_resume(struct ssb_chipcommon *cc)
+{
+ if (!cc->dev)
+ return;
+ chipco_powercontrol_init(cc);
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+}
+
+/* Get the processor clock */
+void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+{
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+ case SSB_PLLTYPE_2:
+ case SSB_PLLTYPE_4:
+ case SSB_PLLTYPE_6:
+ case SSB_PLLTYPE_7:
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
+ break;
+ case SSB_PLLTYPE_3:
+ /* 5350 uses m2 to control mips */
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
+ break;
+ default:
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
+ break;
+ }
+}
+
+/* Get the bus clock */
+void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ u32 *plltype, u32 *n, u32 *m)
+{
+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ switch (*plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
+ break;
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ if (cc->dev->bus->chip_id != 0x5365) {
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
+ break;
+ }
+ /* Fallthough */
+ default:
+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
+ }
+}
+
+void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+ unsigned long ns)
+{
+ struct ssb_device *dev = cc->dev;
+ struct ssb_bus *bus = dev->bus;
+ u32 tmp;
+
+ /* set register for external IO to control LED. */
+ chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
+ tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
+ tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */
+ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
+
+ /* Set timing for the flash */
+ tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
+ tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
+ tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */
+ if ((bus->chip_id == 0x5365) ||
+ (dev->id.revision < 9))
+ chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
+ if ((bus->chip_id == 0x5365) ||
+ (dev->id.revision < 9) ||
+ ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
+ chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
+
+ if (bus->chip_id == 0x5350) {
+ /* Enable EXTIF */
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
+ tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
+ tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
+ tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */
+ chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
+ }
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
+{
+ u32 maxt;
+ enum ssb_clkmode clkmode;
+
+ maxt = ssb_chipco_watchdog_get_max_timer(cc);
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ if (ticks == 1)
+ ticks = 2;
+ else if (ticks > maxt)
+ ticks = maxt;
+ chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks);
+ } else {
+ clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC;
+ ssb_chipco_set_clockmode(cc, clkmode);
+ if (ticks > maxt)
+ ticks = maxt;
+ /* instant NMI */
+ chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
+ }
+ return ticks;
+}
+
+void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
+}
+
+u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
+{
+ return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
+}
+
+u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
+{
+ return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
+}
+
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
+
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ if (cc->dev->id.revision < 20)
+ return 0xffffffff;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ if (cc->dev->id.revision < 20)
+ return 0xffffffff;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+#ifdef CONFIG_SSB_SERIAL
+int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+ struct ssb_serial_port *ports)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int nr_ports = 0;
+ u32 plltype;
+ unsigned int irq;
+ u32 baud_base, div;
+ u32 i, n;
+ unsigned int ccrev = cc->dev->id.revision;
+
+ plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ irq = ssb_mips_irq(cc->dev);
+
+ if (plltype == SSB_PLLTYPE_1) {
+ /* PLL clock */
+ baud_base = ssb_calc_clock_rate(plltype,
+ chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
+ chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
+ div = 1;
+ } else {
+ if (ccrev == 20) {
+ /* BCM5354 uses constant 25MHz clock */
+ baud_base = 25000000;
+ div = 48;
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ } else if ((ccrev >= 11) && (ccrev != 15)) {
+ baud_base = ssb_chipco_alp_clock(cc);
+ div = 1;
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ if (ccrev >= 21) {
+ /* Re-enable the UART clock. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
+ } else if (ccrev >= 3) {
+ /* Internal backplane clock */
+ baud_base = ssb_clockspeed(bus);
+ div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
+ & SSB_CHIPCO_CLKDIV_UART;
+ } else {
+ /* Fixed internal backplane clock */
+ baud_base = 88000000;
+ div = 48;
+ }
+
+ /* Clock source depends on strapping if UartClkOverride is unset */
+ if ((ccrev > 0) &&
+ !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
+ if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
+ SSB_CHIPCO_CAP_UARTCLK_INT) {
+ /* Internal divided backplane clock */
+ baud_base /= div;
+ } else {
+ /* Assume external clock of 1.8432 MHz */
+ baud_base = 1843200;
+ }
+ }
+ }
+
+ /* Determine the registers of the UARTs */
+ n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
+ for (i = 0; i < n; i++) {
+ void __iomem *cc_mmio;
+ void __iomem *uart_regs;
+
+ cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
+ uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
+ /* Offset changed at after rev 0 */
+ if (ccrev == 0)
+ uart_regs += (i * 8);
+ else
+ uart_regs += (i * 256);
+
+ nr_ports++;
+ ports[i].regs = uart_regs;
+ ports[i].irq = irq;
+ ports[i].baud_base = baud_base;
+ ports[i].reg_shift = 0;
+ }
+
+ return nr_ports;
+}
+#endif /* CONFIG_SSB_SERIAL */
Code Review / kvmfornfv.git / blobdiff