--- /dev/null
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012-2014 LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/time.h>
+#include <linux/kthread.h>
+#include <linux/aer.h>
+
+
+#include "mpt3sas_base.h"
+
+static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
+
+
+#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
+
+ /* maximum controller queue depth */
+#define MAX_HBA_QUEUE_DEPTH 30000
+#define MAX_CHAIN_DEPTH 100000
+static int max_queue_depth = -1;
+module_param(max_queue_depth, int, 0);
+MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
+
+static int max_sgl_entries = -1;
+module_param(max_sgl_entries, int, 0);
+MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
+
+static int msix_disable = -1;
+module_param(msix_disable, int, 0);
+MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
+
+static int max_msix_vectors = 8;
+module_param(max_msix_vectors, int, 0);
+MODULE_PARM_DESC(max_msix_vectors,
+ " max msix vectors - (default=8)");
+
+static int mpt3sas_fwfault_debug;
+MODULE_PARM_DESC(mpt3sas_fwfault_debug,
+ " enable detection of firmware fault and halt firmware - (default=0)");
+
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+
+/**
+ * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
+ *
+ */
+static int
+_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ struct MPT3SAS_ADAPTER *ioc;
+
+ if (ret)
+ return ret;
+
+ pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+ list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+ ioc->fwfault_debug = mpt3sas_fwfault_debug;
+ return 0;
+}
+module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
+ param_get_int, &mpt3sas_fwfault_debug, 0644);
+
+/**
+ * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt3sas_remove_dead_ioc_func(void *arg)
+{
+ struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pdev;
+ if ((pdev == NULL))
+ return -1;
+ pci_stop_and_remove_bus_device_locked(pdev);
+ return 0;
+}
+
+/**
+ * _base_fault_reset_work - workq handling ioc fault conditions
+ * @work: input argument, used to derive ioc
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+static void
+_base_fault_reset_work(struct work_struct *work)
+{
+ struct MPT3SAS_ADAPTER *ioc =
+ container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
+ unsigned long flags;
+ u32 doorbell;
+ int rc;
+ struct task_struct *p;
+
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->shost_recovery)
+ goto rearm_timer;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
+ pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
+ ioc->name);
+
+ /*
+ * Call _scsih_flush_pending_cmds callback so that we flush all
+ * pending commands back to OS. This call is required to aovid
+ * deadlock at block layer. Dead IOC will fail to do diag reset,
+ * and this call is safe since dead ioc will never return any
+ * command back from HW.
+ */
+ ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+ /*
+ * Set remove_host flag early since kernel thread will
+ * take some time to execute.
+ */
+ ioc->remove_host = 1;
+ /*Remove the Dead Host */
+ p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
+ "mpt3sas_dead_ioc_%d", ioc->id);
+ if (IS_ERR(p))
+ pr_err(MPT3SAS_FMT
+ "%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
+ ioc->name, __func__);
+ else
+ pr_err(MPT3SAS_FMT
+ "%s: Running mpt3sas_dead_ioc thread success !!!!\n",
+ ioc->name, __func__);
+ return; /* don't rearm timer */
+ }
+
+ if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
+ rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+ pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
+ __func__, (rc == 0) ? "success" : "failed");
+ doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ mpt3sas_base_fault_info(ioc, doorbell &
+ MPI2_DOORBELL_DATA_MASK);
+ if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
+ MPI2_IOC_STATE_OPERATIONAL)
+ return; /* don't rearm timer */
+ }
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ rearm_timer:
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: per adapter object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ if (ioc->fault_reset_work_q)
+ return;
+
+ /* initialize fault polling */
+
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+ snprintf(ioc->fault_reset_work_q_name,
+ sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ ioc->fault_reset_work_q =
+ create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+ if (!ioc->fault_reset_work_q) {
+ pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: per adapter object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ wq = ioc->fault_reset_work_q;
+ ioc->fault_reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
+/**
+ * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code)
+{
+ pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n",
+ ioc->name, fault_code);
+}
+
+/**
+ * mpt3sas_halt_firmware - halt's mpt controller firmware
+ * @ioc: per adapter object
+ *
+ * For debugging timeout related issues. Writing 0xCOFFEE00
+ * to the doorbell register will halt controller firmware. With
+ * the purpose to stop both driver and firmware, the enduser can
+ * obtain a ring buffer from controller UART.
+ */
+void
+mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 doorbell;
+
+ if (!ioc->fwfault_debug)
+ return;
+
+ dump_stack();
+
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ mpt3sas_base_fault_info(ioc , doorbell);
+ else {
+ writel(0xC0FFEE00, &ioc->chip->Doorbell);
+ pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n",
+ ioc->name);
+ }
+
+ if (ioc->fwfault_debug == 2)
+ for (;;)
+ ;
+ else
+ panic("panic in %s\n", __func__);
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _base_sas_ioc_info - verbose translation of the ioc status
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @request_hdr: request mf
+ *
+ * Return nothing.
+ */
+static void
+_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
+ MPI2RequestHeader_t *request_hdr)
+{
+ u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ char *desc = NULL;
+ u16 frame_sz;
+ char *func_str = NULL;
+
+ /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
+ if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+ request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+ request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
+ return;
+
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ return;
+
+ switch (ioc_status) {
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_INVALID_FUNCTION:
+ desc = "invalid function";
+ break;
+ case MPI2_IOCSTATUS_BUSY:
+ desc = "busy";
+ break;
+ case MPI2_IOCSTATUS_INVALID_SGL:
+ desc = "invalid sgl";
+ break;
+ case MPI2_IOCSTATUS_INTERNAL_ERROR:
+ desc = "internal error";
+ break;
+ case MPI2_IOCSTATUS_INVALID_VPID:
+ desc = "invalid vpid";
+ break;
+ case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ desc = "insufficient resources";
+ break;
+ case MPI2_IOCSTATUS_INVALID_FIELD:
+ desc = "invalid field";
+ break;
+ case MPI2_IOCSTATUS_INVALID_STATE:
+ desc = "invalid state";
+ break;
+ case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
+ desc = "op state not supported";
+ break;
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
+ desc = "config invalid action";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
+ desc = "config invalid type";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
+ desc = "config invalid page";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
+ desc = "config invalid data";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
+ desc = "config no defaults";
+ break;
+ case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
+ desc = "config cant commit";
+ break;
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+ case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+ case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+ case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+ case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+ case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+ break;
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+ desc = "eedp guard error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ desc = "eedp ref tag error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ desc = "eedp app tag error";
+ break;
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
+ desc = "target invalid io index";
+ break;
+ case MPI2_IOCSTATUS_TARGET_ABORTED:
+ desc = "target aborted";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
+ desc = "target no conn retryable";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
+ desc = "target no connection";
+ break;
+ case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
+ desc = "target xfer count mismatch";
+ break;
+ case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
+ desc = "target data offset error";
+ break;
+ case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
+ desc = "target too much write data";
+ break;
+ case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
+ desc = "target iu too short";
+ break;
+ case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
+ desc = "target ack nak timeout";
+ break;
+ case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
+ desc = "target nak received";
+ break;
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
+ desc = "smp request failed";
+ break;
+ case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
+ desc = "smp data overrun";
+ break;
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+ case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
+ desc = "diagnostic released";
+ break;
+ default:
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ switch (request_hdr->Function) {
+ case MPI2_FUNCTION_CONFIG:
+ frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
+ func_str = "config_page";
+ break;
+ case MPI2_FUNCTION_SCSI_TASK_MGMT:
+ frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
+ func_str = "task_mgmt";
+ break;
+ case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+ frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
+ func_str = "sas_iounit_ctl";
+ break;
+ case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
+ frame_sz = sizeof(Mpi2SepRequest_t);
+ func_str = "enclosure";
+ break;
+ case MPI2_FUNCTION_IOC_INIT:
+ frame_sz = sizeof(Mpi2IOCInitRequest_t);
+ func_str = "ioc_init";
+ break;
+ case MPI2_FUNCTION_PORT_ENABLE:
+ frame_sz = sizeof(Mpi2PortEnableRequest_t);
+ func_str = "port_enable";
+ break;
+ case MPI2_FUNCTION_SMP_PASSTHROUGH:
+ frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
+ func_str = "smp_passthru";
+ break;
+ default:
+ frame_sz = 32;
+ func_str = "unknown";
+ break;
+ }
+
+ pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
+ ioc->name, desc, ioc_status, request_hdr, func_str);
+
+ _debug_dump_mf(request_hdr, frame_sz/4);
+}
+
+/**
+ * _base_display_event_data - verbose translation of firmware asyn events
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ *
+ * Return nothing.
+ */
+static void
+_base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2EventNotificationReply_t *mpi_reply)
+{
+ char *desc = NULL;
+ u16 event;
+
+ if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
+ return;
+
+ event = le16_to_cpu(mpi_reply->Event);
+
+ switch (event) {
+ case MPI2_EVENT_LOG_DATA:
+ desc = "Log Data";
+ break;
+ case MPI2_EVENT_STATE_CHANGE:
+ desc = "Status Change";
+ break;
+ case MPI2_EVENT_HARD_RESET_RECEIVED:
+ desc = "Hard Reset Received";
+ break;
+ case MPI2_EVENT_EVENT_CHANGE:
+ desc = "Event Change";
+ break;
+ case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ desc = "Device Status Change";
+ break;
+ case MPI2_EVENT_IR_OPERATION_STATUS:
+ desc = "IR Operation Status";
+ break;
+ case MPI2_EVENT_SAS_DISCOVERY:
+ {
+ Mpi2EventDataSasDiscovery_t *event_data =
+ (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
+ pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name,
+ (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->DiscoveryStatus)
+ pr_info("discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
+ pr_info("\n");
+ return;
+ }
+ case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+ desc = "SAS Broadcast Primitive";
+ break;
+ case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ desc = "SAS Init Device Status Change";
+ break;
+ case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ desc = "SAS Init Table Overflow";
+ break;
+ case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ desc = "SAS Topology Change List";
+ break;
+ case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+ desc = "SAS Enclosure Device Status Change";
+ break;
+ case MPI2_EVENT_IR_VOLUME:
+ desc = "IR Volume";
+ break;
+ case MPI2_EVENT_IR_PHYSICAL_DISK:
+ desc = "IR Physical Disk";
+ break;
+ case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+ desc = "IR Configuration Change List";
+ break;
+ case MPI2_EVENT_LOG_ENTRY_ADDED:
+ desc = "Log Entry Added";
+ break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
+}
+#endif
+
+/**
+ * _base_sas_log_info - verbose translation of firmware log info
+ * @ioc: per adapter object
+ * @log_info: log info
+ *
+ * Return nothing.
+ */
+static void
+_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
+{
+ union loginfo_type {
+ u32 loginfo;
+ struct {
+ u32 subcode:16;
+ u32 code:8;
+ u32 originator:4;
+ u32 bus_type:4;
+ } dw;
+ };
+ union loginfo_type sas_loginfo;
+ char *originator_str = NULL;
+
+ sas_loginfo.loginfo = log_info;
+ if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
+ return;
+
+ /* each nexus loss loginfo */
+ if (log_info == 0x31170000)
+ return;
+
+ /* eat the loginfos associated with task aborts */
+ if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
+ 0x31140000 || log_info == 0x31130000))
+ return;
+
+ switch (sas_loginfo.dw.originator) {
+ case 0:
+ originator_str = "IOP";
+ break;
+ case 1:
+ originator_str = "PL";
+ break;
+ case 2:
+ originator_str = "IR";
+ break;
+ }
+
+ pr_warn(MPT3SAS_FMT
+ "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
+ ioc->name, log_info,
+ originator_str, sas_loginfo.dw.code,
+ sas_loginfo.dw.subcode);
+}
+
+/**
+ * _base_display_reply_info -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return nothing.
+ */
+static void
+_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+ u32 loginfo = 0;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (unlikely(!mpi_reply)) {
+ pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+ if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
+ (ioc->logging_level & MPT_DEBUG_REPLY)) {
+ _base_sas_ioc_info(ioc , mpi_reply,
+ mpt3sas_base_get_msg_frame(ioc, smid));
+ }
+#endif
+ if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
+ _base_sas_log_info(ioc, loginfo);
+ }
+
+ if (ioc_status || loginfo) {
+ ioc_status &= MPI2_IOCSTATUS_MASK;
+ mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
+ }
+}
+
+/**
+ * mpt3sas_base_done - base internal command completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+ return 1;
+
+ if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
+ return 1;
+
+ ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
+ if (mpi_reply) {
+ ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
+ memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ }
+ ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
+
+ complete(&ioc->base_cmds.done);
+ return 1;
+}
+
+/**
+ * _base_async_event - main callback handler for firmware asyn events
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
+{
+ Mpi2EventNotificationReply_t *mpi_reply;
+ Mpi2EventAckRequest_t *ack_request;
+ u16 smid;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (!mpi_reply)
+ return 1;
+ if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
+ return 1;
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+ _base_display_event_data(ioc, mpi_reply);
+#endif
+ if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
+ goto out;
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ goto out;
+ }
+
+ ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+ ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+ ack_request->Event = mpi_reply->Event;
+ ack_request->EventContext = mpi_reply->EventContext;
+ ack_request->VF_ID = 0; /* TODO */
+ ack_request->VP_ID = 0;
+ mpt3sas_base_put_smid_default(ioc, smid);
+
+ out:
+
+ /* scsih callback handler */
+ mpt3sas_scsih_event_callback(ioc, msix_index, reply);
+
+ /* ctl callback handler */
+ mpt3sas_ctl_event_callback(ioc, msix_index, reply);
+
+ return 1;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ int i;
+ u8 cb_idx;
+
+ if (smid < ioc->hi_priority_smid) {
+ i = smid - 1;
+ cb_idx = ioc->scsi_lookup[i].cb_idx;
+ } else if (smid < ioc->internal_smid) {
+ i = smid - ioc->hi_priority_smid;
+ cb_idx = ioc->hpr_lookup[i].cb_idx;
+ } else if (smid <= ioc->hba_queue_depth) {
+ i = smid - ioc->internal_smid;
+ cb_idx = ioc->internal_lookup[i].cb_idx;
+ } else
+ cb_idx = 0xFF;
+ return cb_idx;
+}
+
+/**
+ * _base_mask_interrupts - disable interrupts
+ * @ioc: per adapter object
+ *
+ * Disabling ResetIRQ, Reply and Doorbell Interrupts
+ *
+ * Return nothing.
+ */
+static void
+_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 him_register;
+
+ ioc->mask_interrupts = 1;
+ him_register = readl(&ioc->chip->HostInterruptMask);
+ him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
+ writel(him_register, &ioc->chip->HostInterruptMask);
+ readl(&ioc->chip->HostInterruptMask);
+}
+
+/**
+ * _base_unmask_interrupts - enable interrupts
+ * @ioc: per adapter object
+ *
+ * Enabling only Reply Interrupts
+ *
+ * Return nothing.
+ */
+static void
+_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+ u32 him_register;
+
+ him_register = readl(&ioc->chip->HostInterruptMask);
+ him_register &= ~MPI2_HIM_RIM;
+ writel(him_register, &ioc->chip->HostInterruptMask);
+ ioc->mask_interrupts = 0;
+}
+
+union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+};
+
+/**
+ * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ * @r: pt_regs pointer (not used)
+ *
+ * Return IRQ_HANDLE if processed, else IRQ_NONE.
+ */
+static irqreturn_t
+_base_interrupt(int irq, void *bus_id)
+{
+ struct adapter_reply_queue *reply_q = bus_id;
+ union reply_descriptor rd;
+ u32 completed_cmds;
+ u8 request_desript_type;
+ u16 smid;
+ u8 cb_idx;
+ u32 reply;
+ u8 msix_index = reply_q->msix_index;
+ struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
+ Mpi2ReplyDescriptorsUnion_t *rpf;
+ u8 rc;
+
+ if (ioc->mask_interrupts)
+ return IRQ_NONE;
+
+ if (!atomic_add_unless(&reply_q->busy, 1, 1))
+ return IRQ_NONE;
+
+ rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
+ request_desript_type = rpf->Default.ReplyFlags
+ & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+ if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
+ atomic_dec(&reply_q->busy);
+ return IRQ_NONE;
+ }
+
+ completed_cmds = 0;
+ cb_idx = 0xFF;
+ do {
+ rd.word = le64_to_cpu(rpf->Words);
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
+ goto out;
+ reply = 0;
+ smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
+ if (request_desript_type ==
+ MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
+ request_desript_type ==
+ MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+ cb_idx = _base_get_cb_idx(ioc, smid);
+ if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+ (likely(mpt_callbacks[cb_idx] != NULL))) {
+ rc = mpt_callbacks[cb_idx](ioc, smid,
+ msix_index, 0);
+ if (rc)
+ mpt3sas_base_free_smid(ioc, smid);
+ }
+ } else if (request_desript_type ==
+ MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
+ reply = le32_to_cpu(
+ rpf->AddressReply.ReplyFrameAddress);
+ if (reply > ioc->reply_dma_max_address ||
+ reply < ioc->reply_dma_min_address)
+ reply = 0;
+ if (smid) {
+ cb_idx = _base_get_cb_idx(ioc, smid);
+ if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+ (likely(mpt_callbacks[cb_idx] != NULL))) {
+ rc = mpt_callbacks[cb_idx](ioc, smid,
+ msix_index, reply);
+ if (reply)
+ _base_display_reply_info(ioc,
+ smid, msix_index, reply);
+ if (rc)
+ mpt3sas_base_free_smid(ioc,
+ smid);
+ }
+ } else {
+ _base_async_event(ioc, msix_index, reply);
+ }
+
+ /* reply free queue handling */
+ if (reply) {
+ ioc->reply_free_host_index =
+ (ioc->reply_free_host_index ==
+ (ioc->reply_free_queue_depth - 1)) ?
+ 0 : ioc->reply_free_host_index + 1;
+ ioc->reply_free[ioc->reply_free_host_index] =
+ cpu_to_le32(reply);
+ wmb();
+ writel(ioc->reply_free_host_index,
+ &ioc->chip->ReplyFreeHostIndex);
+ }
+ }
+
+ rpf->Words = cpu_to_le64(ULLONG_MAX);
+ reply_q->reply_post_host_index =
+ (reply_q->reply_post_host_index ==
+ (ioc->reply_post_queue_depth - 1)) ? 0 :
+ reply_q->reply_post_host_index + 1;
+ request_desript_type =
+ reply_q->reply_post_free[reply_q->reply_post_host_index].
+ Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+ completed_cmds++;
+ if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+ goto out;
+ if (!reply_q->reply_post_host_index)
+ rpf = reply_q->reply_post_free;
+ else
+ rpf++;
+ } while (1);
+
+ out:
+
+ if (!completed_cmds) {
+ atomic_dec(&reply_q->busy);
+ return IRQ_NONE;
+ }
+
+ wmb();
+ writel(reply_q->reply_post_host_index | (msix_index <<
+ MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+}
+
+/**
+ * _base_is_controller_msix_enabled - is controller support muli-reply queues
+ * @ioc: per adapter object
+ *
+ */
+static inline int
+_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
+{
+ return (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
+}
+
+/**
+ * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues
+ * @ioc: per adapter object
+ * Context: ISR conext
+ *
+ * Called when a Task Management request has completed. We want
+ * to flush the other reply queues so all the outstanding IO has been
+ * completed back to OS before we process the TM completetion.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q;
+
+ /* If MSIX capability is turned off
+ * then multi-queues are not enabled
+ */
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ if (ioc->shost_recovery)
+ return;
+ /* TMs are on msix_index == 0 */
+ if (reply_q->msix_index == 0)
+ continue;
+ _base_interrupt(reply_q->vector, (void *)reply_q);
+ }
+}
+
+/**
+ * mpt3sas_base_release_callback_handler - clear interrupt callback handler
+ * @cb_idx: callback index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_release_callback_handler(u8 cb_idx)
+{
+ mpt_callbacks[cb_idx] = NULL;
+}
+
+/**
+ * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
+ * @cb_func: callback function
+ *
+ * Returns cb_func.
+ */
+u8
+mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
+{
+ u8 cb_idx;
+
+ for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
+ if (mpt_callbacks[cb_idx] == NULL)
+ break;
+
+ mpt_callbacks[cb_idx] = cb_func;
+ return cb_idx;
+}
+
+/**
+ * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_initialize_callback_handler(void)
+{
+ u8 cb_idx;
+
+ for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
+ mpt3sas_base_release_callback_handler(cb_idx);
+}
+
+
+/**
+ * _base_build_zero_len_sge - build zero length sg entry
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ *
+ * Return nothing.
+ */
+static void
+_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+ u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
+ MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
+ MPI2_SGE_FLAGS_SHIFT);
+ ioc->base_add_sg_single(paddr, flags_length, -1);
+}
+
+/**
+ * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+ Mpi2SGESimple32_t *sgel = paddr;
+
+ flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
+ MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+ sgel->FlagsLength = cpu_to_le32(flags_length);
+ sgel->Address = cpu_to_le32(dma_addr);
+}
+
+
+/**
+ * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+ Mpi2SGESimple64_t *sgel = paddr;
+
+ flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
+ MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+ sgel->FlagsLength = cpu_to_le32(flags_length);
+ sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_get_chain_buffer_tracker - obtain chain tracker
+ * @ioc: per adapter object
+ * @smid: smid associated to an IO request
+ *
+ * Returns chain tracker(from ioc->free_chain_list)
+ */
+static struct chain_tracker *
+_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ struct chain_tracker *chain_req;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->free_chain_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+ "chain buffers not available\n", ioc->name));
+ return NULL;
+ }
+ chain_req = list_entry(ioc->free_chain_list.next,
+ struct chain_tracker, tracker_list);
+ list_del_init(&chain_req->tracker_list);
+ list_add_tail(&chain_req->tracker_list,
+ &ioc->scsi_lookup[smid - 1].chain_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return chain_req;
+}
+
+
+/**
+ * _base_build_sg - build generic sg
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * Return nothing.
+ */
+static void
+_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ u32 sgl_flags;
+
+ if (!data_out_sz && !data_in_sz) {
+ _base_build_zero_len_sge(ioc, psge);
+ return;
+ }
+
+ if (data_out_sz && data_in_sz) {
+ /* WRITE sgel first */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+
+ /* incr sgel */
+ psge += ioc->sge_size;
+
+ /* READ sgel last */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ } else if (data_out_sz) /* WRITE */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+ } else if (data_in_sz) /* READ */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ }
+}
+
+/* IEEE format sgls */
+
+/**
+ * _base_add_sg_single_ieee - add sg element for IEEE format
+ * @paddr: virtual address for SGE
+ * @flags: SGE flags
+ * @chain_offset: number of 128 byte elements from start of segment
+ * @length: data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
+ dma_addr_t dma_addr)
+{
+ Mpi25IeeeSgeChain64_t *sgel = paddr;
+
+ sgel->Flags = flags;
+ sgel->NextChainOffset = chain_offset;
+ sgel->Length = cpu_to_le32(length);
+ sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ *
+ * Return nothing.
+ */
+static void
+_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+ u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
+ _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
+}
+
+/**
+ * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ int sges_left;
+ u32 sges_in_segment;
+ u8 simple_sgl_flags;
+ u8 simple_sgl_flags_last;
+ u8 chain_sgl_flags;
+ struct chain_tracker *chain_req;
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ simple_sgl_flags_last = simple_sgl_flags |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+ chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (!sges_left) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "pci_map_sg failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = (ioc->request_sz -
+ offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
+ (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment > 1) {
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the pointers */
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : sges_in_segment;
+ chain_length = sges_in_segment * ioc->sge_size_ieee;
+ if (chain_offset)
+ chain_length += ioc->sge_size_ieee;
+ _base_add_sg_single_ieee(sg_local, chain_sgl_flags,
+ chain_offset, chain_length, chain_dma);
+
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left) {
+ if (sges_left == 1)
+ _base_add_sg_single_ieee(sg_local,
+ simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size_ieee;
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
+ * _base_build_sg_ieee - build generic sg for IEEE format
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * Return nothing.
+ */
+static void
+_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz)
+{
+ u8 sgl_flags;
+
+ if (!data_out_sz && !data_in_sz) {
+ _base_build_zero_len_sge_ieee(ioc, psge);
+ return;
+ }
+
+ if (data_out_sz && data_in_sz) {
+ /* WRITE sgel first */
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+ data_out_dma);
+
+ /* incr sgel */
+ psge += ioc->sge_size_ieee;
+
+ /* READ sgel last */
+ sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+ data_in_dma);
+ } else if (data_out_sz) /* WRITE */ {
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+ data_out_dma);
+ } else if (data_in_sz) /* READ */ {
+ sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+ data_in_dma);
+ }
+}
+
+#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
+
+/**
+ * _base_config_dma_addressing - set dma addressing
+ * @ioc: per adapter object
+ * @pdev: PCI device struct
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
+{
+ struct sysinfo s;
+ u64 consistent_dma_mask;
+
+ if (ioc->dma_mask)
+ consistent_dma_mask = DMA_BIT_MASK(64);
+ else
+ consistent_dma_mask = DMA_BIT_MASK(32);
+
+ if (sizeof(dma_addr_t) > 4) {
+ const uint64_t required_mask =
+ dma_get_required_mask(&pdev->dev);
+ if ((required_mask > DMA_BIT_MASK(32)) &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
+ ioc->base_add_sg_single = &_base_add_sg_single_64;
+ ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+ ioc->dma_mask = 64;
+ goto out;
+ }
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ ioc->base_add_sg_single = &_base_add_sg_single_32;
+ ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+ ioc->dma_mask = 32;
+ } else
+ return -ENODEV;
+
+ out:
+ si_meminfo(&s);
+ pr_info(MPT3SAS_FMT
+ "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+ ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
+
+ return 0;
+}
+
+static int
+_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
+ struct pci_dev *pdev)
+{
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * _base_check_enable_msix - checks MSIX capabable.
+ * @ioc: per adapter object
+ *
+ * Check to see if card is capable of MSIX, and set number
+ * of available msix vectors
+ */
+static int
+_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ int base;
+ u16 message_control;
+
+ base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
+ if (!base) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
+ ioc->name));
+ return -EINVAL;
+ }
+
+ /* get msix vector count */
+
+ pci_read_config_word(ioc->pdev, base + 2, &message_control);
+ ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ if (ioc->msix_vector_count > 8)
+ ioc->msix_vector_count = 8;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "msix is supported, vector_count(%d)\n",
+ ioc->name, ioc->msix_vector_count));
+ return 0;
+}
+
+/**
+ * _base_free_irq - free irq
+ * @ioc: per adapter object
+ *
+ * Freeing respective reply_queue from the list.
+ */
+static void
+_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct adapter_reply_queue *reply_q, *next;
+
+ if (list_empty(&ioc->reply_queue_list))
+ return;
+
+ list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+ list_del(&reply_q->list);
+ irq_set_affinity_hint(reply_q->vector, NULL);
+ free_cpumask_var(reply_q->affinity_hint);
+ synchronize_irq(reply_q->vector);
+ free_irq(reply_q->vector, reply_q);
+ kfree(reply_q);
+ }
+}
+
+/**
+ * _base_request_irq - request irq
+ * @ioc: per adapter object
+ * @index: msix index into vector table
+ * @vector: irq vector
+ *
+ * Inserting respective reply_queue into the list.
+ */
+static int
+_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
+{
+ struct adapter_reply_queue *reply_q;
+ int r;
+
+ reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
+ if (!reply_q) {
+ pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n",
+ ioc->name, (int)sizeof(struct adapter_reply_queue));
+ return -ENOMEM;
+ }
+ reply_q->ioc = ioc;
+ reply_q->msix_index = index;
+ reply_q->vector = vector;
+
+ if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_clear(reply_q->affinity_hint);
+
+ atomic_set(&reply_q->busy, 0);
+ if (ioc->msix_enable)
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
+ MPT3SAS_DRIVER_NAME, ioc->id, index);
+ else
+ snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
+ MPT3SAS_DRIVER_NAME, ioc->id);
+ r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
+ reply_q);
+ if (r) {
+ pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n",
+ reply_q->name, vector);
+ kfree(reply_q);
+ return -EBUSY;
+ }
+
+ INIT_LIST_HEAD(&reply_q->list);
+ list_add_tail(&reply_q->list, &ioc->reply_queue_list);
+ return 0;
+}
+
+/**
+ * _base_assign_reply_queues - assigning msix index for each cpu
+ * @ioc: per adapter object
+ *
+ * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
+ *
+ * It would nice if we could call irq_set_affinity, however it is not
+ * an exported symbol
+ */
+static void
+_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+ unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ struct adapter_reply_queue *reply_q;
+
+ if (!_base_is_controller_msix_enabled(ioc))
+ return;
+
+ memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
+
+ nr_cpus = num_online_cpus();
+ nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
+ ioc->facts.MaxMSIxVectors);
+ if (!nr_msix)
+ return;
+
+ cpu = cpumask_first(cpu_online_mask);
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
+ unsigned int i, group = nr_cpus / nr_msix;
+
+ if (cpu >= nr_cpus)
+ break;
+
+ if (index < nr_cpus % nr_msix)
+ group++;
+
+ for (i = 0 ; i < group ; i++) {
+ ioc->cpu_msix_table[cpu] = index;
+ cpumask_or(reply_q->affinity_hint,
+ reply_q->affinity_hint, get_cpu_mask(cpu));
+ cpu = cpumask_next(cpu, cpu_online_mask);
+ }
+
+ if (irq_set_affinity_hint(reply_q->vector,
+ reply_q->affinity_hint))
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "error setting affinity hint for irq vector %d\n",
+ ioc->name, reply_q->vector));
+ index++;
+ }
+}
+
+/**
+ * _base_disable_msix - disables msix
+ * @ioc: per adapter object
+ *
+ */
+static void
+_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ if (!ioc->msix_enable)
+ return;
+ pci_disable_msix(ioc->pdev);
+ ioc->msix_enable = 0;
+}
+
+/**
+ * _base_enable_msix - enables msix, failback to io_apic
+ * @ioc: per adapter object
+ *
+ */
+static int
+_base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct msix_entry *entries, *a;
+ int r;
+ int i;
+ u8 try_msix = 0;
+
+ if (msix_disable == -1 || msix_disable == 0)
+ try_msix = 1;
+
+ if (!try_msix)
+ goto try_ioapic;
+
+ if (_base_check_enable_msix(ioc) != 0)
+ goto try_ioapic;
+
+ ioc->reply_queue_count = min_t(int, ioc->cpu_count,
+ ioc->msix_vector_count);
+
+ printk(MPT3SAS_FMT "MSI-X vectors supported: %d, no of cores"
+ ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
+ ioc->cpu_count, max_msix_vectors);
+
+ if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+ max_msix_vectors = 8;
+
+ if (max_msix_vectors > 0) {
+ ioc->reply_queue_count = min_t(int, max_msix_vectors,
+ ioc->reply_queue_count);
+ ioc->msix_vector_count = ioc->reply_queue_count;
+ } else if (max_msix_vectors == 0)
+ goto try_ioapic;
+
+ entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (!entries) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "kcalloc failed @ at %s:%d/%s() !!!\n",
+ ioc->name, __FILE__, __LINE__, __func__));
+ goto try_ioapic;
+ }
+
+ for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
+ a->entry = i;
+
+ r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
+ if (r) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "pci_enable_msix_exact failed (r=%d) !!!\n",
+ ioc->name, r));
+ kfree(entries);
+ goto try_ioapic;
+ }
+
+ ioc->msix_enable = 1;
+ for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
+ r = _base_request_irq(ioc, i, a->vector);
+ if (r) {
+ _base_free_irq(ioc);
+ _base_disable_msix(ioc);
+ kfree(entries);
+ goto try_ioapic;
+ }
+ }
+
+ kfree(entries);
+ return 0;
+
+/* failback to io_apic interrupt routing */
+ try_ioapic:
+
+ ioc->reply_queue_count = 1;
+ r = _base_request_irq(ioc, 0, ioc->pdev->irq);
+
+ return r;
+}
+
+/**
+ * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct pci_dev *pdev = ioc->pdev;
+ u32 memap_sz;
+ u32 pio_sz;
+ int i, r = 0;
+ u64 pio_chip = 0;
+ u64 chip_phys = 0;
+ struct adapter_reply_queue *reply_q;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
+ ioc->name, __func__));
+
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev)) {
+ pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
+ ioc->name);
+ ioc->bars = 0;
+ return -ENODEV;
+ }
+
+
+ if (pci_request_selected_regions(pdev, ioc->bars,
+ MPT3SAS_DRIVER_NAME)) {
+ pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
+ ioc->name);
+ ioc->bars = 0;
+ r = -ENODEV;
+ goto out_fail;
+ }
+
+/* AER (Advanced Error Reporting) hooks */
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+
+
+ if (_base_config_dma_addressing(ioc, pdev) != 0) {
+ pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ r = -ENODEV;
+ goto out_fail;
+ }
+
+ for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ if (pio_sz)
+ continue;
+ pio_chip = (u64)pci_resource_start(pdev, i);
+ pio_sz = pci_resource_len(pdev, i);
+ } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+ if (memap_sz)
+ continue;
+ ioc->chip_phys = pci_resource_start(pdev, i);
+ chip_phys = (u64)ioc->chip_phys;
+ memap_sz = pci_resource_len(pdev, i);
+ ioc->chip = ioremap(ioc->chip_phys, memap_sz);
+ if (ioc->chip == NULL) {
+ pr_err(MPT3SAS_FMT "unable to map adapter memory!\n",
+ ioc->name);
+ r = -EINVAL;
+ goto out_fail;
+ }
+ }
+ }
+
+ _base_mask_interrupts(ioc);
+
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out_fail;
+
+ if (!ioc->rdpq_array_enable_assigned) {
+ ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+ ioc->rdpq_array_enable_assigned = 1;
+ }
+
+ r = _base_enable_msix(ioc);
+ if (r)
+ goto out_fail;
+
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
+ pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
+ reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
+ "IO-APIC enabled"), reply_q->vector);
+
+ pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
+ ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
+ pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
+ ioc->name, (unsigned long long)pio_chip, pio_sz);
+
+ /* Save PCI configuration state for recovery from PCI AER/EEH errors */
+ pci_save_state(pdev);
+ return 0;
+
+ out_fail:
+ if (ioc->chip_phys)
+ iounmap(ioc->chip);
+ ioc->chip_phys = 0;
+ pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ return r;
+}
+
+/**
+ * mpt3sas_base_get_msg_frame - obtain request mf pointer
+ * @ioc: per adapter object
+ * @smid: system request message index(smid zero is invalid)
+ *
+ * Returns virt pointer to message frame.
+ */
+void *
+mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->request + (smid * ioc->request_sz));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns virt pointer to sense buffer.
+ */
+void *
+mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns phys pointer to the low 32bit address of the sense buffer.
+ */
+__le32
+mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
+ SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
+ * @ioc: per adapter object
+ * @phys_addr: lower 32 physical addr of the reply
+ *
+ * Converts 32bit lower physical addr into a virt address.
+ */
+void *
+mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
+{
+ if (!phys_addr)
+ return NULL;
+ return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
+}
+
+/**
+ * mpt3sas_base_get_smid - obtain a free smid from internal queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->internal_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ pr_err(MPT3SAS_FMT "%s: smid not available\n",
+ ioc->name, __func__);
+ return 0;
+ }
+
+ request = list_entry(ioc->internal_free_list.next,
+ struct request_tracker, tracker_list);
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+ struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ struct scsiio_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ pr_err(MPT3SAS_FMT "%s: smid not available\n",
+ ioc->name, __func__);
+ return 0;
+ }
+
+ request = list_entry(ioc->free_list.next,
+ struct scsiio_tracker, tracker_list);
+ request->scmd = scmd;
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->hpr_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return 0;
+ }
+
+ request = list_entry(ioc->hpr_free_list.next,
+ struct request_tracker, tracker_list);
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt3sas_base_free_smid - put smid back on free_list
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ unsigned long flags;
+ int i;
+ struct chain_tracker *chain_req, *next;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (smid < ioc->hi_priority_smid) {
+ /* scsiio queue */
+ i = smid - 1;
+ if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
+ list_for_each_entry_safe(chain_req, next,
+ &ioc->scsi_lookup[i].chain_list, tracker_list) {
+ list_del_init(&chain_req->tracker_list);
+ list_add(&chain_req->tracker_list,
+ &ioc->free_chain_list);
+ }
+ }
+ ioc->scsi_lookup[i].cb_idx = 0xFF;
+ ioc->scsi_lookup[i].scmd = NULL;
+ list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ /*
+ * See _wait_for_commands_to_complete() call with regards
+ * to this code.
+ */
+ if (ioc->shost_recovery && ioc->pending_io_count) {
+ if (ioc->pending_io_count == 1)
+ wake_up(&ioc->reset_wq);
+ ioc->pending_io_count--;
+ }
+ return;
+ } else if (smid < ioc->internal_smid) {
+ /* hi-priority */
+ i = smid - ioc->hi_priority_smid;
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
+ } else if (smid <= ioc->hba_queue_depth) {
+ /* internal queue */
+ i = smid - ioc->internal_smid;
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ list_add(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
+
+/**
+ * _base_writeq - 64 bit write to MMIO
+ * @ioc: per adapter object
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
+ * care of 32 bit environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+#if defined(writeq) && defined(CONFIG_64BIT)
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+ writeq(cpu_to_le64(b), addr);
+}
+#else
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+ unsigned long flags;
+ __u64 data_out = cpu_to_le64(b);
+
+ spin_lock_irqsave(writeq_lock, flags);
+ writel((u32)(data_out), addr);
+ writel((u32)(data_out >> 32), (addr + 4));
+ spin_unlock_irqrestore(writeq_lock, flags);
+}
+#endif
+
+static inline u8
+_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc)
+{
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
+}
+
+/**
+ * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+
+ descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.SCSIIO.RequestFlags =
+ MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.HighPriority.RequestFlags =
+ MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
+ descriptor.HighPriority.MSIxIndex = 0;
+ descriptor.HighPriority.SMID = cpu_to_le16(smid);
+ descriptor.HighPriority.LMID = 0;
+ descriptor.HighPriority.Reserved1 = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_default - Default, primarily used for config pages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+
+ descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
+ descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.Default.SMID = cpu_to_le16(smid);
+ descriptor.Default.LMID = 0;
+ descriptor.Default.DescriptorTypeDependent = 0;
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_display_intel_branding - Display branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
+{
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
+ return;
+
+ switch (ioc->pdev->device) {
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_INTEL_RMS3JC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RMS3JC080_BRANDING);
+ break;
+
+ case MPT3SAS_INTEL_RS3GC008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3GC008_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3FC044_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3FC044_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3UC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3UC080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+}
+
+
+
+/**
+ * _base_display_ioc_capabilities - Disply IOC's capabilities.
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
+{
+ int i = 0;
+ char desc[16];
+ u32 iounit_pg1_flags;
+ u32 bios_version;
+
+ bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+ strncpy(desc, ioc->manu_pg0.ChipName, 16);
+ pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\
+ "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
+ ioc->name, desc,
+ (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+ (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+ (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+ ioc->facts.FWVersion.Word & 0x000000FF,
+ ioc->pdev->revision,
+ (bios_version & 0xFF000000) >> 24,
+ (bios_version & 0x00FF0000) >> 16,
+ (bios_version & 0x0000FF00) >> 8,
+ bios_version & 0x000000FF);
+
+ _base_display_intel_branding(ioc);
+
+ pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
+
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
+ pr_info("Initiator");
+ i++;
+ }
+
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
+ pr_info("%sTarget", i ? "," : "");
+ i++;
+ }
+
+ i = 0;
+ pr_info("), ");
+ pr_info("Capabilities=(");
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+ pr_info("Raid");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
+ pr_info("%sTLR", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
+ pr_info("%sMulticast", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
+ pr_info("%sBIDI Target", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
+ pr_info("%sEEDP", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
+ pr_info("%sSnapshot Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
+ pr_info("%sDiag Trace Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
+ pr_info("%sDiag Extended Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
+ pr_info("%sTask Set Full", i ? "," : "");
+ i++;
+ }
+
+ iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+ if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
+ pr_info("%sNCQ", i ? "," : "");
+ i++;
+ }
+
+ pr_info(")\n");
+}
+
+/**
+ * mpt3sas_base_update_missing_delay - change the missing delay timers
+ * @ioc: per adapter object
+ * @device_missing_delay: amount of time till device is reported missing
+ * @io_missing_delay: interval IO is returned when there is a missing device
+ *
+ * Return nothing.
+ *
+ * Passed on the command line, this function will modify the device missing
+ * delay, as well as the io missing delay. This should be called at driver
+ * load time.
+ */
+void
+mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+ u16 device_missing_delay, u8 io_missing_delay)
+{
+ u16 dmd, dmd_new, dmd_orignal;
+ u8 io_missing_delay_original;
+ u16 sz;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2ConfigReply_t mpi_reply;
+ u8 num_phys = 0;
+ u16 ioc_status;
+
+ mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+ if (!num_phys)
+ return;
+
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ /* device missing delay */
+ dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
+ if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+ dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+ else
+ dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+ dmd_orignal = dmd;
+ if (device_missing_delay > 0x7F) {
+ dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
+ device_missing_delay;
+ dmd = dmd / 16;
+ dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
+ } else
+ dmd = device_missing_delay;
+ sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
+
+ /* io missing delay */
+ io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
+ sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
+
+ if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+ sz)) {
+ if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+ dmd_new = (dmd &
+ MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+ else
+ dmd_new =
+ dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+ pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n",
+ ioc->name, dmd_orignal, dmd_new);
+ pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n",
+ ioc->name, io_missing_delay_original,
+ io_missing_delay);
+ ioc->device_missing_delay = dmd_new;
+ ioc->io_missing_delay = io_missing_delay;
+ }
+
+out:
+ kfree(sas_iounit_pg1);
+}
+/**
+ * _base_static_config_pages - static start of day config pages
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ u32 iounit_pg1_flags;
+
+ mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
+ if (ioc->ir_firmware)
+ mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
+ &ioc->manu_pg10);
+
+ /*
+ * Ensure correct T10 PI operation if vendor left EEDPTagMode
+ * flag unset in NVDATA.
+ */
+ mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
+ if (ioc->manu_pg11.EEDPTagMode == 0) {
+ pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
+ ioc->name);
+ ioc->manu_pg11.EEDPTagMode &= ~0x3;
+ ioc->manu_pg11.EEDPTagMode |= 0x1;
+ mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
+ &ioc->manu_pg11);
+ }
+
+ mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
+ mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
+ mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
+ mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
+ mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
+ _base_display_ioc_capabilities(ioc);
+
+ /*
+ * Enable task_set_full handling in iounit_pg1 when the
+ * facts capabilities indicate that its supported.
+ */
+ iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+ if ((ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
+ iounit_pg1_flags &=
+ ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+ else
+ iounit_pg1_flags |=
+ MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+ ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
+ mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
+}
+
+/**
+ * _base_release_memory_pools - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated from _base_allocate_memory_pools.
+ *
+ * Return nothing.
+ */
+static void
+_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+ int i = 0;
+ struct reply_post_struct *rps;
+
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->request) {
+ pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
+ ioc->request, ioc->request_dma);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request_pool(0x%p): free\n",
+ ioc->name, ioc->request));
+ ioc->request = NULL;
+ }
+
+ if (ioc->sense) {
+ pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+ if (ioc->sense_dma_pool)
+ pci_pool_destroy(ioc->sense_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "sense_pool(0x%p): free\n",
+ ioc->name, ioc->sense));
+ ioc->sense = NULL;
+ }
+
+ if (ioc->reply) {
+ pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
+ if (ioc->reply_dma_pool)
+ pci_pool_destroy(ioc->reply_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_pool(0x%p): free\n",
+ ioc->name, ioc->reply));
+ ioc->reply = NULL;
+ }
+
+ if (ioc->reply_free) {
+ pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
+ ioc->reply_free_dma);
+ if (ioc->reply_free_dma_pool)
+ pci_pool_destroy(ioc->reply_free_dma_pool);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_free_pool(0x%p): free\n",
+ ioc->name, ioc->reply_free));
+ ioc->reply_free = NULL;
+ }
+
+ if (ioc->reply_post) {
+ do {
+ rps = &ioc->reply_post[i];
+ if (rps->reply_post_free) {
+ pci_pool_free(
+ ioc->reply_post_free_dma_pool,
+ rps->reply_post_free,
+ rps->reply_post_free_dma);
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_post_free_pool(0x%p): free\n",
+ ioc->name, rps->reply_post_free));
+ rps->reply_post_free = NULL;
+ }
+ } while (ioc->rdpq_array_enable &&
+ (++i < ioc->reply_queue_count));
+
+ if (ioc->reply_post_free_dma_pool)
+ pci_pool_destroy(ioc->reply_post_free_dma_pool);
+ kfree(ioc->reply_post);
+ }
+
+ if (ioc->config_page) {
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT
+ "config_page(0x%p): free\n", ioc->name,
+ ioc->config_page));
+ pci_free_consistent(ioc->pdev, ioc->config_page_sz,
+ ioc->config_page, ioc->config_page_dma);
+ }
+
+ if (ioc->scsi_lookup) {
+ free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
+ ioc->scsi_lookup = NULL;
+ }
+ kfree(ioc->hpr_lookup);
+ kfree(ioc->internal_lookup);
+ if (ioc->chain_lookup) {
+ for (i = 0; i < ioc->chain_depth; i++) {
+ if (ioc->chain_lookup[i].chain_buffer)
+ pci_pool_free(ioc->chain_dma_pool,
+ ioc->chain_lookup[i].chain_buffer,
+ ioc->chain_lookup[i].chain_buffer_dma);
+ }
+ if (ioc->chain_dma_pool)
+ pci_pool_destroy(ioc->chain_dma_pool);
+ free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
+ ioc->chain_lookup = NULL;
+ }
+}
+
+/**
+ * _base_allocate_memory_pools - allocate start of day memory pools
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ struct mpt3sas_facts *facts;
+ u16 max_sge_elements;
+ u16 chains_needed_per_io;
+ u32 sz, total_sz, reply_post_free_sz;
+ u32 retry_sz;
+ u16 max_request_credit;
+ unsigned short sg_tablesize;
+ u16 sge_size;
+ int i;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+
+ retry_sz = 0;
+ facts = &ioc->facts;
+
+ /* command line tunables for max sgl entries */
+ if (max_sgl_entries != -1)
+ sg_tablesize = max_sgl_entries;
+ else
+ sg_tablesize = MPT3SAS_SG_DEPTH;
+
+ if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
+ sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+ sg_tablesize = min_t(unsigned short, sg_tablesize,
+ SCSI_MAX_SG_CHAIN_SEGMENTS);
+ pr_warn(MPT3SAS_FMT
+ "sg_tablesize(%u) is bigger than kernel"
+ " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+ sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+ }
+ ioc->shost->sg_tablesize = sg_tablesize;
+
+ ioc->hi_priority_depth = facts->HighPriorityCredit;
+ ioc->internal_depth = ioc->hi_priority_depth + (5);
+ /* command line tunables for max controller queue depth */
+ if (max_queue_depth != -1 && max_queue_depth != 0) {
+ max_request_credit = min_t(u16, max_queue_depth +
+ ioc->hi_priority_depth + ioc->internal_depth,
+ facts->RequestCredit);
+ if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+ max_request_credit = MAX_HBA_QUEUE_DEPTH;
+ } else
+ max_request_credit = min_t(u16, facts->RequestCredit,
+ MAX_HBA_QUEUE_DEPTH);
+
+ ioc->hba_queue_depth = max_request_credit;
+
+ /* request frame size */
+ ioc->request_sz = facts->IOCRequestFrameSize * 4;
+
+ /* reply frame size */
+ ioc->reply_sz = facts->ReplyFrameSize * 4;
+
+ /* calculate the max scatter element size */
+ sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
+
+ retry_allocation:
+ total_sz = 0;
+ /* calculate number of sg elements left over in the 1st frame */
+ max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
+ sizeof(Mpi2SGEIOUnion_t)) + sge_size);
+ ioc->max_sges_in_main_message = max_sge_elements/sge_size;
+
+ /* now do the same for a chain buffer */
+ max_sge_elements = ioc->request_sz - sge_size;
+ ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
+
+ /*
+ * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
+ */
+ chains_needed_per_io = ((ioc->shost->sg_tablesize -
+ ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
+ + 1;
+ if (chains_needed_per_io > facts->MaxChainDepth) {
+ chains_needed_per_io = facts->MaxChainDepth;
+ ioc->shost->sg_tablesize = min_t(u16,
+ ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
+ * chains_needed_per_io), ioc->shost->sg_tablesize);
+ }
+ ioc->chains_needed_per_io = chains_needed_per_io;
+
+ /* reply free queue sizing - taking into account for 64 FW events */
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+
+ /* calculate reply descriptor post queue depth */
+ ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+ ioc->reply_free_queue_depth + 1 ;
+ /* align the reply post queue on the next 16 count boundary */
+ if (ioc->reply_post_queue_depth % 16)
+ ioc->reply_post_queue_depth += 16 -
+ (ioc->reply_post_queue_depth % 16);
+
+
+ if (ioc->reply_post_queue_depth >
+ facts->MaxReplyDescriptorPostQueueDepth) {
+ ioc->reply_post_queue_depth =
+ facts->MaxReplyDescriptorPostQueueDepth -
+ (facts->MaxReplyDescriptorPostQueueDepth % 16);
+ ioc->hba_queue_depth =
+ ((ioc->reply_post_queue_depth - 64) / 2) - 1;
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \
+ "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
+ "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
+ ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
+ ioc->chains_needed_per_io));
+
+ /* reply post queue, 16 byte align */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+
+ sz = reply_post_free_sz;
+ if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
+ sz *= ioc->reply_queue_count;
+
+ ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
+ (ioc->reply_queue_count):1,
+ sizeof(struct reply_post_struct), GFP_KERNEL);
+
+ if (!ioc->reply_post) {
+ pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
+ ioc->pdev, sz, 16, 0);
+ if (!ioc->reply_post_free_dma_pool) {
+ pr_err(MPT3SAS_FMT
+ "reply_post_free pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ i = 0;
+ do {
+ ioc->reply_post[i].reply_post_free =
+ pci_pool_alloc(ioc->reply_post_free_dma_pool,
+ GFP_KERNEL,
+ &ioc->reply_post[i].reply_post_free_dma);
+ if (!ioc->reply_post[i].reply_post_free) {
+ pr_err(MPT3SAS_FMT
+ "reply_post_free pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_post[i].reply_post_free, 0, sz);
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply post free pool (0x%p): depth(%d),"
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_post[i].reply_post_free,
+ ioc->reply_post_queue_depth, 8, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_post_free_dma = (0x%llx)\n", ioc->name,
+ (unsigned long long)
+ ioc->reply_post[i].reply_post_free_dma));
+ total_sz += sz;
+ } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
+
+ if (ioc->dma_mask == 64) {
+ if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
+ pr_warn(MPT3SAS_FMT
+ "no suitable consistent DMA mask for %s\n",
+ ioc->name, pci_name(ioc->pdev));
+ goto out;
+ }
+ }
+
+ ioc->scsiio_depth = ioc->hba_queue_depth -
+ ioc->hi_priority_depth - ioc->internal_depth;
+
+ /* set the scsi host can_queue depth
+ * with some internal commands that could be outstanding
+ */
+ ioc->shost->can_queue = ioc->scsiio_depth;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "scsi host: can_queue depth (%d)\n",
+ ioc->name, ioc->shost->can_queue));
+
+
+ /* contiguous pool for request and chains, 16 byte align, one extra "
+ * "frame for smid=0
+ */
+ ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+ sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
+
+ /* hi-priority queue */
+ sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+ /* internal queue */
+ sz += (ioc->internal_depth * ioc->request_sz);
+
+ ioc->request_dma_sz = sz;
+ ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
+ if (!ioc->request) {
+ pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+ "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
+ ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+ if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
+ goto out;
+ retry_sz += 64;
+ ioc->hba_queue_depth = max_request_credit - retry_sz;
+ goto retry_allocation;
+ }
+
+ if (retry_sz)
+ pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+ "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
+ ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+
+ /* hi-priority queue */
+ ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+ ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+
+ /* internal queue */
+ ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+ ioc->request_sz);
+ ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+ ioc->request_sz);
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz,
+ (ioc->hba_queue_depth * ioc->request_sz)/1024));
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n",
+ ioc->name, (unsigned long long) ioc->request_dma));
+ total_sz += sz;
+
+ sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
+ ioc->scsi_lookup_pages = get_order(sz);
+ ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
+ GFP_KERNEL, ioc->scsi_lookup_pages);
+ if (!ioc->scsi_lookup) {
+ pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n",
+ ioc->name, (int)sz);
+ goto out;
+ }
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n",
+ ioc->name, ioc->request, ioc->scsiio_depth));
+
+ ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
+ sz = ioc->chain_depth * sizeof(struct chain_tracker);
+ ioc->chain_pages = get_order(sz);
+ ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
+ GFP_KERNEL, ioc->chain_pages);
+ if (!ioc->chain_lookup) {
+ pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
+ ioc->request_sz, 16, 0);
+ if (!ioc->chain_dma_pool) {
+ pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (i = 0; i < ioc->chain_depth; i++) {
+ ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
+ ioc->chain_dma_pool , GFP_KERNEL,
+ &ioc->chain_lookup[i].chain_buffer_dma);
+ if (!ioc->chain_lookup[i].chain_buffer) {
+ ioc->chain_depth = i;
+ goto chain_done;
+ }
+ total_sz += ioc->request_sz;
+ }
+ chain_done:
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->chain_depth, ioc->request_sz,
+ ((ioc->chain_depth * ioc->request_sz))/1024));
+
+ /* initialize hi-priority queue smid's */
+ ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->hpr_lookup) {
+ pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "hi_priority(0x%p): depth(%d), start smid(%d)\n",
+ ioc->name, ioc->hi_priority,
+ ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+ /* initialize internal queue smid's */
+ ioc->internal_lookup = kcalloc(ioc->internal_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->internal_lookup) {
+ pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "internal(0x%p): depth(%d), start smid(%d)\n",
+ ioc->name, ioc->internal,
+ ioc->internal_depth, ioc->internal_smid));
+
+ /* sense buffers, 4 byte align */
+ sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
+ ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
+ 0);
+ if (!ioc->sense_dma_pool) {
+ pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
+ &ioc->sense_dma);
+ if (!ioc->sense) {
+ pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
+ "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
+ SCSI_SENSE_BUFFERSIZE, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->sense_dma));
+ total_sz += sz;
+
+ /* reply pool, 4 byte align */
+ sz = ioc->reply_free_queue_depth * ioc->reply_sz;
+ ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
+ 0);
+ if (!ioc->reply_dma_pool) {
+ pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
+ &ioc->reply_dma);
+ if (!ioc->reply) {
+ pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
+ ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->reply,
+ ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->reply_dma));
+ total_sz += sz;
+
+ /* reply free queue, 16 byte align */
+ sz = ioc->reply_free_queue_depth * 4;
+ ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
+ ioc->pdev, sz, 16, 0);
+ if (!ioc->reply_free_dma_pool) {
+ pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
+ &ioc->reply_free_dma);
+ if (!ioc->reply_free) {
+ pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_free, 0, sz);
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \
+ "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "reply_free_dma (0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->reply_free_dma));
+ total_sz += sz;
+
+ ioc->config_page_sz = 512;
+ ioc->config_page = pci_alloc_consistent(ioc->pdev,
+ ioc->config_page_sz, &ioc->config_page_dma);
+ if (!ioc->config_page) {
+ pr_err(MPT3SAS_FMT
+ "config page: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "config page(0x%p): size(%d)\n",
+ ioc->name, ioc->config_page, ioc->config_page_sz));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->config_page_dma));
+ total_sz += ioc->config_page_sz;
+
+ pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n",
+ ioc->name, total_sz/1024);
+ pr_info(MPT3SAS_FMT
+ "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
+ ioc->name, ioc->shost->can_queue, facts->RequestCredit);
+ pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n",
+ ioc->name, ioc->shost->sg_tablesize);
+ return 0;
+
+ out:
+ return -ENOMEM;
+}
+
+/**
+ * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Returns all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
+{
+ u32 s, sc;
+
+ s = readl(&ioc->chip->Doorbell);
+ sc = s & MPI2_IOC_STATE_MASK;
+ return cooked ? sc : s;
+}
+
+/**
+ * _base_wait_on_iocstate - waiting on a particular ioc state
+ * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
+ int sleep_flag)
+{
+ u32 count, cntdn;
+ u32 current_state;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ current_state = mpt3sas_base_get_iocstate(ioc, 1);
+ if (current_state == ioc_state)
+ return 0;
+ if (count && current_state == MPI2_IOC_STATE_FAULT)
+ break;
+ if (sleep_flag == CAN_SLEEP)
+ usleep_range(1000, 1500);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ return current_state;
+}
+
+/**
+ * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
+ * a write to the doorbell)
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
+ */
+static int
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 int_status;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+ if (sleep_flag == CAN_SLEEP)
+ usleep_range(1000, 1500);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
+ * doorbell.
+ */
+static int
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 int_status;
+ u32 doorbell;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) ==
+ MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc , doorbell);
+ return -EFAULT;
+ }
+ } else if (int_status == 0xFFFFFFFF)
+ goto out;
+
+ if (sleep_flag == CAN_SLEEP)
+ usleep_range(1000, 1500);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ out:
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 doorbell_reg;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ doorbell_reg = readl(&ioc->chip->Doorbell);
+ if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+ if (sleep_flag == CAN_SLEEP)
+ usleep_range(1000, 1500);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
+ ioc->name, __func__, count, doorbell_reg);
+ return -EFAULT;
+}
+
+/**
+ * _base_send_ioc_reset - send doorbell reset
+ * @ioc: per adapter object
+ * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
+ int sleep_flag)
+{
+ u32 ioc_state;
+ int r = 0;
+
+ if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
+ pr_err(MPT3SAS_FMT "%s: unknown reset_type\n",
+ ioc->name, __func__);
+ return -EFAULT;
+ }
+
+ if (!(ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
+ return -EFAULT;
+
+ pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name);
+
+ writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
+ &ioc->chip->Doorbell);
+ if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
+ r = -EFAULT;
+ goto out;
+ }
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
+ timeout, sleep_flag);
+ if (ioc_state) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ r = -EFAULT;
+ goto out;
+ }
+ out:
+ pr_info(MPT3SAS_FMT "message unit reset: %s\n",
+ ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+ return r;
+}
+
+/**
+ * _base_handshake_req_reply_wait - send request thru doorbell interface
+ * @ioc: per adapter object
+ * @request_bytes: request length
+ * @request: pointer having request payload
+ * @reply_bytes: reply length
+ * @reply: pointer to reply payload
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
+ u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
+{
+ MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
+ int i;
+ u8 failed;
+ u16 dummy;
+ __le32 *mfp;
+
+ /* make sure doorbell is not in use */
+ if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+ pr_err(MPT3SAS_FMT
+ "doorbell is in use (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* clear pending doorbell interrupts from previous state changes */
+ if (readl(&ioc->chip->HostInterruptStatus) &
+ MPI2_HIS_IOC2SYS_DB_STATUS)
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ /* send message to ioc */
+ writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
+ ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
+ &ioc->chip->Doorbell);
+
+ if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake ack failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* send message 32-bits at a time */
+ for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
+ writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
+ if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
+ failed = 1;
+ }
+
+ if (failed) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake sending request failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* now wait for the reply */
+ if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* read the first two 16-bits, it gives the total length of the reply */
+ reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ for (i = 2; i < default_reply->MsgLength * 2; i++) {
+ if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+ pr_err(MPT3SAS_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ if (i >= reply_bytes/2) /* overflow case */
+ dummy = readl(&ioc->chip->Doorbell);
+ else
+ reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ }
+
+ _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
+ if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "doorbell is in use (line=%d)\n", ioc->name, __LINE__));
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if (ioc->logging_level & MPT_DEBUG_INIT) {
+ mfp = (__le32 *)reply;
+ pr_info("\toffset:data\n");
+ for (i = 0; i < reply_bytes/4; i++)
+ pr_info("\t[0x%02x]:%08x\n", i*4,
+ le32_to_cpu(mfp[i]));
+ }
+ return 0;
+}
+
+/**
+ * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SAS IO Unit Control Request message allows the host to perform low-level
+ * operations, such as resets on the PHYs of the IO Unit, also allows the host
+ * to obtain the IOC assigned device handles for a device if it has other
+ * identifying information about the device, in addition allows the host to
+ * remove IOC resources associated with the device.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2SasIoUnitControlReply_t *mpi_reply,
+ Mpi2SasIoUnitControlRequest_t *mpi_request)
+{
+ u16 smid;
+ u32 ioc_state;
+ unsigned long timeleft;
+ bool issue_reset = false;
+ int rc;
+ void *request;
+ u16 wait_state_count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mutex_lock(&ioc->base_cmds.mutex);
+
+ if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+ pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ wait_state_count = 0;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ if (wait_state_count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to ioc not operational\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+ ssleep(1);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ pr_info(MPT3SAS_FMT
+ "%s: waiting for operational state(count=%d)\n",
+ ioc->name, __func__, wait_state_count);
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
+ if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+ mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
+ ioc->ioc_link_reset_in_progress = 1;
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+ msecs_to_jiffies(10000));
+ if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+ mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
+ ioc->ioc_link_reset_in_progress)
+ ioc->ioc_link_reset_in_progress = 0;
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2SasIoUnitControlRequest_t)/4);
+ if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
+ issue_reset = true;
+ goto issue_host_reset;
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+ memcpy(mpi_reply, ioc->base_cmds.reply,
+ sizeof(Mpi2SasIoUnitControlReply_t));
+ else
+ memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+
+ issue_host_reset:
+ if (issue_reset)
+ mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ rc = -EFAULT;
+ out:
+ mutex_unlock(&ioc->base_cmds.mutex);
+ return rc;
+}
+
+/**
+ * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SCSI Enclosure Processor request message causes the IOC to
+ * communicate with SES devices to control LED status signals.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
+{
+ u16 smid;
+ u32 ioc_state;
+ unsigned long timeleft;
+ bool issue_reset = false;
+ int rc;
+ void *request;
+ u16 wait_state_count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mutex_lock(&ioc->base_cmds.mutex);
+
+ if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+ pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ wait_state_count = 0;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ if (wait_state_count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed due to ioc not operational\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+ ssleep(1);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+ pr_info(MPT3SAS_FMT
+ "%s: waiting for operational state(count=%d)\n",
+ ioc->name,
+ __func__, wait_state_count);
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+ msecs_to_jiffies(10000));
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2SepRequest_t)/4);
+ if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
+ issue_reset = false;
+ goto issue_host_reset;
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+ memcpy(mpi_reply, ioc->base_cmds.reply,
+ sizeof(Mpi2SepReply_t));
+ else
+ memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ goto out;
+
+ issue_host_reset:
+ if (issue_reset)
+ mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ rc = -EFAULT;
+ out:
+ mutex_unlock(&ioc->base_cmds.mutex);
+ return rc;
+}
+
+/**
+ * _base_get_port_facts - obtain port facts reply and save in ioc
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
+{
+ Mpi2PortFactsRequest_t mpi_request;
+ Mpi2PortFactsReply_t mpi_reply;
+ struct mpt3sas_port_facts *pfacts;
+ int mpi_reply_sz, mpi_request_sz, r;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
+ mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
+ memset(&mpi_request, 0, mpi_request_sz);
+ mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
+ mpi_request.PortNumber = port;
+ r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+ (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ pfacts = &ioc->pfacts[port];
+ memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
+ pfacts->PortNumber = mpi_reply.PortNumber;
+ pfacts->VP_ID = mpi_reply.VP_ID;
+ pfacts->VF_ID = mpi_reply.VF_ID;
+ pfacts->MaxPostedCmdBuffers =
+ le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
+
+ return 0;
+}
+
+/**
+ * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ Mpi2IOCFactsRequest_t mpi_request;
+ Mpi2IOCFactsReply_t mpi_reply;
+ struct mpt3sas_facts *facts;
+ int mpi_reply_sz, mpi_request_sz, r;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
+ mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
+ memset(&mpi_request, 0, mpi_request_sz);
+ mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
+ r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+ (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ facts = &ioc->facts;
+ memset(facts, 0, sizeof(struct mpt3sas_facts));
+ facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
+ facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
+ facts->VP_ID = mpi_reply.VP_ID;
+ facts->VF_ID = mpi_reply.VF_ID;
+ facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
+ facts->MaxChainDepth = mpi_reply.MaxChainDepth;
+ facts->WhoInit = mpi_reply.WhoInit;
+ facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+ facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
+ facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
+ facts->MaxReplyDescriptorPostQueueDepth =
+ le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
+ facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
+ facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
+ if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
+ ioc->ir_firmware = 1;
+ if ((facts->IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
+ ioc->rdpq_array_capable = 1;
+ facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
+ facts->IOCRequestFrameSize =
+ le16_to_cpu(mpi_reply.IOCRequestFrameSize);
+ facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
+ facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
+ ioc->shost->max_id = -1;
+ facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
+ facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
+ facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
+ facts->HighPriorityCredit =
+ le16_to_cpu(mpi_reply.HighPriorityCredit);
+ facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
+ facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "hba queue depth(%d), max chains per io(%d)\n",
+ ioc->name, facts->RequestCredit,
+ facts->MaxChainDepth));
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT
+ "request frame size(%d), reply frame size(%d)\n", ioc->name,
+ facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
+ return 0;
+}
+
+/**
+ * _base_send_ioc_init - send ioc_init to firmware
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ Mpi2IOCInitRequest_t mpi_request;
+ Mpi2IOCInitReply_t mpi_reply;
+ int i, r = 0;
+ struct timeval current_time;
+ u16 ioc_status;
+ u32 reply_post_free_array_sz = 0;
+ Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
+ dma_addr_t reply_post_free_array_dma;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
+ mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
+ mpi_request.VF_ID = 0; /* TODO */
+ mpi_request.VP_ID = 0;
+ mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
+ mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+
+ if (_base_is_controller_msix_enabled(ioc))
+ mpi_request.HostMSIxVectors = ioc->reply_queue_count;
+ mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
+ mpi_request.ReplyDescriptorPostQueueDepth =
+ cpu_to_le16(ioc->reply_post_queue_depth);
+ mpi_request.ReplyFreeQueueDepth =
+ cpu_to_le16(ioc->reply_free_queue_depth);
+
+ mpi_request.SenseBufferAddressHigh =
+ cpu_to_le32((u64)ioc->sense_dma >> 32);
+ mpi_request.SystemReplyAddressHigh =
+ cpu_to_le32((u64)ioc->reply_dma >> 32);
+ mpi_request.SystemRequestFrameBaseAddress =
+ cpu_to_le64((u64)ioc->request_dma);
+ mpi_request.ReplyFreeQueueAddress =
+ cpu_to_le64((u64)ioc->reply_free_dma);
+
+ if (ioc->rdpq_array_enable) {
+ reply_post_free_array_sz = ioc->reply_queue_count *
+ sizeof(Mpi2IOCInitRDPQArrayEntry);
+ reply_post_free_array = pci_alloc_consistent(ioc->pdev,
+ reply_post_free_array_sz, &reply_post_free_array_dma);
+ if (!reply_post_free_array) {
+ pr_err(MPT3SAS_FMT
+ "reply_post_free_array: pci_alloc_consistent failed\n",
+ ioc->name);
+ r = -ENOMEM;
+ goto out;
+ }
+ memset(reply_post_free_array, 0, reply_post_free_array_sz);
+ for (i = 0; i < ioc->reply_queue_count; i++)
+ reply_post_free_array[i].RDPQBaseAddress =
+ cpu_to_le64(
+ (u64)ioc->reply_post[i].reply_post_free_dma);
+ mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)reply_post_free_array_dma);
+ } else {
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+ }
+
+ /* This time stamp specifies number of milliseconds
+ * since epoch ~ midnight January 1, 1970.
+ */
+ do_gettimeofday(¤t_time);
+ mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
+ (current_time.tv_usec / 1000));
+
+ if (ioc->logging_level & MPT_DEBUG_INIT) {
+ __le32 *mfp;
+ int i;
+
+ mfp = (__le32 *)&mpi_request;
+ pr_info("\toffset:data\n");
+ for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
+ pr_info("\t[0x%02x]:%08x\n", i*4,
+ le32_to_cpu(mfp[i]));
+ }
+
+ r = _base_handshake_req_reply_wait(ioc,
+ sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
+ sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
+ sleep_flag);
+
+ if (r != 0) {
+ pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ goto out;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
+ mpi_reply.IOCLogInfo) {
+ pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__);
+ r = -EIO;
+ }
+
+out:
+ if (reply_post_free_array)
+ pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
+ reply_post_free_array,
+ reply_post_free_array_dma);
+ return r;
+}
+
+/**
+ * mpt3sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+
+ if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
+ return 1;
+
+ mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+ if (!mpi_reply)
+ return 1;
+
+ if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
+ return 1;
+
+ ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
+ ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
+ ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
+ memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ ioc->port_enable_failed = 1;
+
+ if (ioc->is_driver_loading) {
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ mpt3sas_port_enable_complete(ioc);
+ return 1;
+ } else {
+ ioc->start_scan_failed = ioc_status;
+ ioc->start_scan = 0;
+ return 1;
+ }
+ }
+ complete(&ioc->port_enable_cmds.done);
+ return 1;
+}
+
+/**
+ * _base_send_port_enable - send port_enable(discovery stuff) to firmware
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ Mpi2PortEnableReply_t *mpi_reply;
+ unsigned long timeleft;
+ int r = 0;
+ u16 smid;
+ u16 ioc_status;
+
+ pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ init_completion(&ioc->port_enable_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
+ 300*HZ);
+ if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2PortEnableRequest_t)/4);
+ if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
+ r = -EFAULT;
+ else
+ r = -ETIME;
+ goto out;
+ }
+
+ mpi_reply = ioc->port_enable_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n",
+ ioc->name, __func__, ioc_status);
+ r = -EFAULT;
+ goto out;
+ }
+
+ out:
+ ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+ pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+ "SUCCESS" : "FAILED"));
+ return r;
+}
+
+/**
+ * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ u16 smid;
+
+ pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ mpt3sas_base_put_smid_default(ioc, smid);
+ return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
+{
+ /* We wait for discovery to complete if IR firmware is loaded.
+ * The sas topology events arrive before PD events, so we need time to
+ * turn on the bit in ioc->pd_handles to indicate PD
+ * Also, it maybe required to report Volumes ahead of physical
+ * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+ */
+ if (ioc->ir_firmware)
+ return 1;
+
+ /* if no Bios, then we don't need to wait */
+ if (!ioc->bios_pg3.BiosVersion)
+ return 0;
+
+ /* Bios is present, then we drop down here.
+ *
+ * If there any entries in the Bios Page 2, then we wait
+ * for discovery to complete.
+ */
+
+ /* Current Boot Device */
+ if ((ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Request Boot Device */
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Alternate Request Boot Device */
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+ return 0;
+
+ return 1;
+}
+
+/**
+ * _base_unmask_events - turn on notification for this event
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The mask is stored in ioc->event_masks.
+ */
+static void
+_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+ u32 desired_event;
+
+ if (event >= 128)
+ return;
+
+ desired_event = (1 << (event % 32));
+
+ if (event < 32)
+ ioc->event_masks[0] &= ~desired_event;
+ else if (event < 64)
+ ioc->event_masks[1] &= ~desired_event;
+ else if (event < 96)
+ ioc->event_masks[2] &= ~desired_event;
+ else if (event < 128)
+ ioc->event_masks[3] &= ~desired_event;
+}
+
+/**
+ * _base_event_notification - send event notification
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ Mpi2EventNotificationRequest_t *mpi_request;
+ unsigned long timeleft;
+ u16 smid;
+ int r = 0;
+ int i;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+ pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+ if (!smid) {
+ pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+ ioc->base_cmds.status = MPT3_CMD_PENDING;
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+ ioc->base_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
+ for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ mpi_request->EventMasks[i] =
+ cpu_to_le32(ioc->event_masks[i]);
+ init_completion(&ioc->base_cmds.done);
+ mpt3sas_base_put_smid_default(ioc, smid);
+ timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
+ if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+ pr_err(MPT3SAS_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2EventNotificationRequest_t)/4);
+ if (ioc->base_cmds.status & MPT3_CMD_RESET)
+ r = -EFAULT;
+ else
+ r = -ETIME;
+ } else
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n",
+ ioc->name, __func__));
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+ return r;
+}
+
+/**
+ * mpt3sas_base_validate_event_type - validating event types
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * This will turn on firmware event notification when application
+ * ask for that event. We don't mask events that are already enabled.
+ */
+void
+mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
+{
+ int i, j;
+ u32 event_mask, desired_event;
+ u8 send_update_to_fw;
+
+ for (i = 0, send_update_to_fw = 0; i <
+ MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
+ event_mask = ~event_type[i];
+ desired_event = 1;
+ for (j = 0; j < 32; j++) {
+ if (!(event_mask & desired_event) &&
+ (ioc->event_masks[i] & desired_event)) {
+ ioc->event_masks[i] &= ~desired_event;
+ send_update_to_fw = 1;
+ }
+ desired_event = (desired_event << 1);
+ }
+ }
+
+ if (!send_update_to_fw)
+ return;
+
+ mutex_lock(&ioc->base_cmds.mutex);
+ _base_event_notification(ioc, CAN_SLEEP);
+ mutex_unlock(&ioc->base_cmds.mutex);
+}
+
+/**
+ * _base_diag_reset - the "big hammer" start of day reset
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ u32 host_diagnostic;
+ u32 ioc_state;
+ u32 count;
+ u32 hcb_size;
+
+ pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n",
+ ioc->name));
+
+ count = 0;
+ do {
+ /* Write magic sequence to WriteSequence register
+ * Loop until in diagnostic mode
+ */
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "write magic sequence\n", ioc->name));
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
+ writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+ /* wait 100 msec */
+ if (sleep_flag == CAN_SLEEP)
+ msleep(100);
+ else
+ mdelay(100);
+
+ if (count++ > 20)
+ goto out;
+
+ host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
+ ioc->name, count, host_diagnostic));
+
+ } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+
+ hcb_size = readl(&ioc->chip->HCBSize);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n",
+ ioc->name));
+ writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
+ &ioc->chip->HostDiagnostic);
+
+ /*This delay allows the chip PCIe hardware time to finish reset tasks*/
+ if (sleep_flag == CAN_SLEEP)
+ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+ else
+ mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+
+ /* Approximately 300 second max wait */
+ for (count = 0; count < (300000000 /
+ MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
+
+ host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+
+ if (host_diagnostic == 0xFFFFFFFF)
+ goto out;
+ if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
+ break;
+
+ /* Wait to pass the second read delay window */
+ if (sleep_flag == CAN_SLEEP)
+ msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
+ else
+ mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
+ }
+
+ if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "restart the adapter assuming the HCB Address points to good F/W\n",
+ ioc->name));
+ host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
+ host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
+ writel(host_diagnostic, &ioc->chip->HostDiagnostic);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "re-enable the HCDW\n", ioc->name));
+ writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
+ &ioc->chip->HCBSize);
+ }
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n",
+ ioc->name));
+ writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
+ &ioc->chip->HostDiagnostic);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "disable writes to the diagnostic register\n", ioc->name));
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+ drsprintk(ioc, pr_info(MPT3SAS_FMT
+ "Wait for FW to go to the READY state\n", ioc->name));
+ ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
+ sleep_flag);
+ if (ioc_state) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ goto out;
+ }
+
+ pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name);
+ return 0;
+
+ out:
+ pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name);
+ return -EFAULT;
+}
+
+/**
+ * _base_make_ioc_ready - put controller in READY state
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+ enum reset_type type)
+{
+ u32 ioc_state;
+ int rc;
+ int count;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery)
+ return 0;
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+ ioc->name, __func__, ioc_state));
+
+ /* if in RESET state, it should move to READY state shortly */
+ count = 0;
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
+ while ((ioc_state & MPI2_IOC_STATE_MASK) !=
+ MPI2_IOC_STATE_READY) {
+ if (count++ == 10) {
+ pr_err(MPT3SAS_FMT
+ "%s: failed going to ready state (ioc_state=0x%x)\n",
+ ioc->name, __func__, ioc_state);
+ return -EFAULT;
+ }
+ if (sleep_flag == CAN_SLEEP)
+ ssleep(1);
+ else
+ mdelay(1000);
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ }
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
+ return 0;
+
+ if (ioc_state & MPI2_DOORBELL_USED) {
+ dhsprintk(ioc, pr_info(MPT3SAS_FMT
+ "unexpected doorbell active!\n",
+ ioc->name));
+ goto issue_diag_reset;
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+ mpt3sas_base_fault_info(ioc, ioc_state &
+ MPI2_DOORBELL_DATA_MASK);
+ goto issue_diag_reset;
+ }
+
+ if (type == FORCE_BIG_HAMMER)
+ goto issue_diag_reset;
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+ if (!(_base_send_ioc_reset(ioc,
+ MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
+ return 0;
+ }
+
+ issue_diag_reset:
+ rc = _base_diag_reset(ioc, CAN_SLEEP);
+ return rc;
+}
+
+/**
+ * _base_make_ioc_operational - put controller in OPERATIONAL state
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ int r, i;
+ unsigned long flags;
+ u32 reply_address;
+ u16 smid;
+ struct _tr_list *delayed_tr, *delayed_tr_next;
+ struct adapter_reply_queue *reply_q;
+ long reply_post_free;
+ u32 reply_post_free_sz, index = 0;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ /* clean the delayed target reset list */
+ list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+ &ioc->delayed_tr_list, list) {
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ }
+
+
+ list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+ &ioc->delayed_tr_volume_list, list) {
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ }
+
+ /* initialize the scsi lookup free list */
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ INIT_LIST_HEAD(&ioc->free_list);
+ smid = 1;
+ for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
+ INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
+ ioc->scsi_lookup[i].cb_idx = 0xFF;
+ ioc->scsi_lookup[i].smid = smid;
+ ioc->scsi_lookup[i].scmd = NULL;
+ list_add_tail(&ioc->scsi_lookup[i].tracker_list,
+ &ioc->free_list);
+ }
+
+ /* hi-priority queue */
+ INIT_LIST_HEAD(&ioc->hpr_free_list);
+ smid = ioc->hi_priority_smid;
+ for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ ioc->hpr_lookup[i].smid = smid;
+ list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+ &ioc->hpr_free_list);
+ }
+
+ /* internal queue */
+ INIT_LIST_HEAD(&ioc->internal_free_list);
+ smid = ioc->internal_smid;
+ for (i = 0; i < ioc->internal_depth; i++, smid++) {
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ ioc->internal_lookup[i].smid = smid;
+ list_add_tail(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
+
+ /* chain pool */
+ INIT_LIST_HEAD(&ioc->free_chain_list);
+ for (i = 0; i < ioc->chain_depth; i++)
+ list_add_tail(&ioc->chain_lookup[i].tracker_list,
+ &ioc->free_chain_list);
+
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ /* initialize Reply Free Queue */
+ for (i = 0, reply_address = (u32)ioc->reply_dma ;
+ i < ioc->reply_free_queue_depth ; i++, reply_address +=
+ ioc->reply_sz)
+ ioc->reply_free[i] = cpu_to_le32(reply_address);
+
+ /* initialize reply queues */
+ if (ioc->is_driver_loading)
+ _base_assign_reply_queues(ioc);
+
+ /* initialize Reply Post Free Queue */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+ reply_post_free = (long)ioc->reply_post[index].reply_post_free;
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ reply_q->reply_post_host_index = 0;
+ reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
+ reply_post_free;
+ for (i = 0; i < ioc->reply_post_queue_depth; i++)
+ reply_q->reply_post_free[i].Words =
+ cpu_to_le64(ULLONG_MAX);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_free_queue;
+ /*
+ * If RDPQ is enabled, switch to the next allocation.
+ * Otherwise advance within the contiguous region.
+ */
+ if (ioc->rdpq_array_enable)
+ reply_post_free = (long)
+ ioc->reply_post[++index].reply_post_free;
+ else
+ reply_post_free += reply_post_free_sz;
+ }
+ skip_init_reply_post_free_queue:
+
+ r = _base_send_ioc_init(ioc, sleep_flag);
+ if (r)
+ return r;
+
+ /* initialize reply free host index */
+ ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
+ writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
+
+ /* initialize reply post host index */
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
+ &ioc->chip->ReplyPostHostIndex);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_host_index;
+ }
+
+ skip_init_reply_post_host_index:
+
+ _base_unmask_interrupts(ioc);
+ r = _base_event_notification(ioc, sleep_flag);
+ if (r)
+ return r;
+
+ if (sleep_flag == CAN_SLEEP)
+ _base_static_config_pages(ioc);
+
+
+ if (ioc->is_driver_loading) {
+ ioc->wait_for_discovery_to_complete =
+ _base_determine_wait_on_discovery(ioc);
+
+ return r; /* scan_start and scan_finished support */
+ }
+
+ r = _base_send_port_enable(ioc, sleep_flag);
+ if (r)
+ return r;
+
+ return r;
+}
+
+/**
+ * mpt3sas_base_free_resources - free resources controller resources
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+ struct pci_dev *pdev = ioc->pdev;
+
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ if (ioc->chip_phys && ioc->chip) {
+ _base_mask_interrupts(ioc);
+ ioc->shost_recovery = 1;
+ _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+ ioc->shost_recovery = 0;
+ }
+
+ _base_free_irq(ioc);
+ _base_disable_msix(ioc);
+
+ if (ioc->chip_phys && ioc->chip)
+ iounmap(ioc->chip);
+ ioc->chip_phys = 0;
+
+ if (pci_is_enabled(pdev)) {
+ pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ }
+ return;
+}
+
+/**
+ * mpt3sas_base_attach - attach controller instance
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
+{
+ int r, i;
+ int cpu_id, last_cpu_id = 0;
+
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ /* setup cpu_msix_table */
+ ioc->cpu_count = num_online_cpus();
+ for_each_online_cpu(cpu_id)
+ last_cpu_id = cpu_id;
+ ioc->cpu_msix_table_sz = last_cpu_id + 1;
+ ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
+ ioc->reply_queue_count = 1;
+ if (!ioc->cpu_msix_table) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT
+ "allocation for cpu_msix_table failed!!!\n",
+ ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ ioc->rdpq_array_enable_assigned = 0;
+ ioc->dma_mask = 0;
+ r = mpt3sas_base_map_resources(ioc);
+ if (r)
+ goto out_free_resources;
+
+
+ pci_set_drvdata(ioc->pdev, ioc->shost);
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out_free_resources;
+
+ /*
+ * In SAS3.0,
+ * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+ * Target Status - all require the IEEE formated scatter gather
+ * elements.
+ */
+
+ ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+ ioc->build_sg = &_base_build_sg_ieee;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+ ioc->mpi25 = 1;
+ ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+
+ /*
+ * These function pointers for other requests that don't
+ * the require IEEE scatter gather elements.
+ *
+ * For example Configuration Pages and SAS IOUNIT Control don't.
+ */
+ ioc->build_sg_mpi = &_base_build_sg;
+ ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
+
+ r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+ if (r)
+ goto out_free_resources;
+
+ ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+ sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
+ if (!ioc->pfacts) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+ r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+ if (r)
+ goto out_free_resources;
+ }
+
+ r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
+ if (r)
+ goto out_free_resources;
+
+ init_waitqueue_head(&ioc->reset_wq);
+
+ /* allocate memory pd handle bitmask list */
+ ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+ if (ioc->facts.MaxDevHandle % 8)
+ ioc->pd_handles_sz++;
+ ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
+ GFP_KERNEL);
+ if (!ioc->pd_handles) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
+ GFP_KERNEL);
+ if (!ioc->blocking_handles) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ ioc->fwfault_debug = mpt3sas_fwfault_debug;
+
+ /* base internal command bits */
+ mutex_init(&ioc->base_cmds.mutex);
+ ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+ /* port_enable command bits */
+ ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+
+ /* transport internal command bits */
+ ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->transport_cmds.mutex);
+
+ /* scsih internal command bits */
+ ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->scsih_cmds.mutex);
+
+ /* task management internal command bits */
+ ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->tm_cmds.mutex);
+
+ /* config page internal command bits */
+ ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->config_cmds.mutex);
+
+ /* ctl module internal command bits */
+ ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+ mutex_init(&ioc->ctl_cmds.mutex);
+
+ if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
+ !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
+ !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
+ !ioc->ctl_cmds.sense) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+
+ for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+ ioc->event_masks[i] = -1;
+
+ /* here we enable the events we care about */
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
+ _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
+ _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
+
+ r = _base_make_ioc_operational(ioc, CAN_SLEEP);
+ if (r)
+ goto out_free_resources;
+
+ return 0;
+
+ out_free_resources:
+
+ ioc->remove_host = 1;
+
+ mpt3sas_base_free_resources(ioc);
+ _base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
+ kfree(ioc->tm_cmds.reply);
+ kfree(ioc->transport_cmds.reply);
+ kfree(ioc->scsih_cmds.reply);
+ kfree(ioc->config_cmds.reply);
+ kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
+ kfree(ioc->ctl_cmds.reply);
+ kfree(ioc->ctl_cmds.sense);
+ kfree(ioc->pfacts);
+ ioc->ctl_cmds.reply = NULL;
+ ioc->base_cmds.reply = NULL;
+ ioc->tm_cmds.reply = NULL;
+ ioc->scsih_cmds.reply = NULL;
+ ioc->transport_cmds.reply = NULL;
+ ioc->config_cmds.reply = NULL;
+ ioc->pfacts = NULL;
+ return r;
+}
+
+
+/**
+ * mpt3sas_base_detach - remove controller instance
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
+{
+ dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpt3sas_base_stop_watchdog(ioc);
+ mpt3sas_base_free_resources(ioc);
+ _base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
+ kfree(ioc->cpu_msix_table);
+ kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
+ kfree(ioc->pfacts);
+ kfree(ioc->ctl_cmds.reply);
+ kfree(ioc->ctl_cmds.sense);
+ kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
+ kfree(ioc->tm_cmds.reply);
+ kfree(ioc->transport_cmds.reply);
+ kfree(ioc->scsih_cmds.reply);
+ kfree(ioc->config_cmds.reply);
+}
+
+/**
+ * _base_reset_handler - reset callback handler (for base)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
+ * MPT3_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+static void
+_base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
+{
+ mpt3sas_scsih_reset_handler(ioc, reset_phase);
+ mpt3sas_ctl_reset_handler(ioc, reset_phase);
+ switch (reset_phase) {
+ case MPT3_IOC_PRE_RESET:
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT3_IOC_AFTER_RESET:
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+ if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
+ ioc->transport_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
+ complete(&ioc->transport_cmds.done);
+ }
+ if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+ ioc->base_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
+ complete(&ioc->base_cmds.done);
+ }
+ if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+ ioc->port_enable_failed = 1;
+ ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+ if (ioc->is_driver_loading) {
+ ioc->start_scan_failed =
+ MPI2_IOCSTATUS_INTERNAL_ERROR;
+ ioc->start_scan = 0;
+ ioc->port_enable_cmds.status =
+ MPT3_CMD_NOT_USED;
+ } else
+ complete(&ioc->port_enable_cmds.done);
+ }
+ if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
+ ioc->config_cmds.status |= MPT3_CMD_RESET;
+ mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
+ ioc->config_cmds.smid = USHRT_MAX;
+ complete(&ioc->config_cmds.done);
+ }
+ break;
+ case MPT3_IOC_DONE_RESET:
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+ break;
+ }
+}
+
+/**
+ * _wait_for_commands_to_complete - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * This function waiting(3s) for all pending commands to complete
+ * prior to putting controller in reset.
+ */
+static void
+_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+ u32 ioc_state;
+ unsigned long flags;
+ u16 i;
+
+ ioc->pending_io_count = 0;
+ if (sleep_flag != CAN_SLEEP)
+ return;
+
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
+ return;
+
+ /* pending command count */
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ for (i = 0; i < ioc->scsiio_depth; i++)
+ if (ioc->scsi_lookup[i].cb_idx != 0xFF)
+ ioc->pending_io_count++;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ if (!ioc->pending_io_count)
+ return;
+
+ /* wait for pending commands to complete */
+ wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
+}
+
+/**
+ * mpt3sas_base_hard_reset_handler - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+ enum reset_type type)
+{
+ int r;
+ unsigned long flags;
+ u32 ioc_state;
+ u8 is_fault = 0, is_trigger = 0;
+
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ if (ioc->pci_error_recovery) {
+ pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n",
+ ioc->name, __func__);
+ r = 0;
+ goto out_unlocked;
+ }
+
+ if (mpt3sas_fwfault_debug)
+ mpt3sas_halt_firmware(ioc);
+
+ /* TODO - What we really should be doing is pulling
+ * out all the code associated with NO_SLEEP; its never used.
+ * That is legacy code from mpt fusion driver, ported over.
+ * I will leave this BUG_ON here for now till its been resolved.
+ */
+ BUG_ON(sleep_flag == NO_SLEEP);
+
+ /* wait for an active reset in progress to complete */
+ if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
+ do {
+ ssleep(1);
+ } while (ioc->shost_recovery == 1);
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+ __func__));
+ return ioc->ioc_reset_in_progress_status;
+ }
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->shost_recovery = 1;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+ MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+ (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+ MPT3_DIAG_BUFFER_IS_RELEASED))) {
+ is_trigger = 1;
+ ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ is_fault = 1;
+ }
+ _base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
+ _wait_for_commands_to_complete(ioc, sleep_flag);
+ _base_mask_interrupts(ioc);
+ r = _base_make_ioc_ready(ioc, sleep_flag, type);
+ if (r)
+ goto out;
+ _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
+
+ /* If this hard reset is called while port enable is active, then
+ * there is no reason to call make_ioc_operational
+ */
+ if (ioc->is_driver_loading && ioc->port_enable_failed) {
+ ioc->remove_host = 1;
+ r = -EFAULT;
+ goto out;
+ }
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out;
+
+ if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+ panic("%s: Issue occurred with flashing controller firmware."
+ "Please reboot the system and ensure that the correct"
+ " firmware version is running\n", ioc->name);
+
+ r = _base_make_ioc_operational(ioc, sleep_flag);
+ if (!r)
+ _base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
+
+ out:
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n",
+ ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->ioc_reset_in_progress_status = r;
+ ioc->shost_recovery = 0;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->ioc_reset_count++;
+ mutex_unlock(&ioc->reset_in_progress_mutex);
+
+ out_unlocked:
+ if ((r == 0) && is_trigger) {
+ if (is_fault)
+ mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
+ else
+ mpt3sas_trigger_master(ioc,
+ MASTER_TRIGGER_ADAPTER_RESET);
+ }
+ dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+ __func__));
+ return r;
+}
Code Review / kvmfornfv.git / blobdiff