--- /dev/null
+/*
+ * Target driver for EMC CLARiiON AX/CX-series hardware.
+ * Based on code from Lars Marowsky-Bree <lmb@suse.de>
+ * and Ed Goggin <egoggin@emc.com>.
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2006 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dh.h>
+#include <scsi/scsi_device.h>
+
+#define CLARIION_NAME "emc"
+
+#define CLARIION_TRESPASS_PAGE 0x22
+#define CLARIION_BUFFER_SIZE 0xFC
+#define CLARIION_TIMEOUT (60 * HZ)
+#define CLARIION_RETRIES 3
+#define CLARIION_UNBOUND_LU -1
+#define CLARIION_SP_A 0
+#define CLARIION_SP_B 1
+
+/* Flags */
+#define CLARIION_SHORT_TRESPASS 1
+#define CLARIION_HONOR_RESERVATIONS 2
+
+/* LUN states */
+#define CLARIION_LUN_UNINITIALIZED -1
+#define CLARIION_LUN_UNBOUND 0
+#define CLARIION_LUN_BOUND 1
+#define CLARIION_LUN_OWNED 2
+
+static unsigned char long_trespass[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ CLARIION_TRESPASS_PAGE, /* Page code */
+ 0x09, /* Page length - 2 */
+ 0x01, /* Trespass code */
+ 0xff, 0xff, /* Trespass target */
+ 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
+};
+
+static unsigned char short_trespass[] = {
+ 0, 0, 0, 0,
+ CLARIION_TRESPASS_PAGE, /* Page code */
+ 0x02, /* Page length - 2 */
+ 0x01, /* Trespass code */
+ 0xff, /* Trespass target */
+};
+
+static const char * lun_state[] =
+{
+ "not bound",
+ "bound",
+ "owned",
+};
+
+struct clariion_dh_data {
+ struct scsi_dh_data dh_data;
+ /*
+ * Flags:
+ * CLARIION_SHORT_TRESPASS
+ * Use short trespass command (FC-series) or the long version
+ * (default for AX/CX CLARiiON arrays).
+ *
+ * CLARIION_HONOR_RESERVATIONS
+ * Whether or not (default) to honor SCSI reservations when
+ * initiating a switch-over.
+ */
+ unsigned flags;
+ /*
+ * I/O buffer for both MODE_SELECT and INQUIRY commands.
+ */
+ unsigned char buffer[CLARIION_BUFFER_SIZE];
+ /*
+ * SCSI sense buffer for commands -- assumes serial issuance
+ * and completion sequence of all commands for same multipath.
+ */
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+ unsigned int senselen;
+ /*
+ * LUN state
+ */
+ int lun_state;
+ /*
+ * SP Port number
+ */
+ int port;
+ /*
+ * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
+ * path's mapped LUN
+ */
+ int default_sp;
+ /*
+ * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
+ * path's mapped LUN
+ */
+ int current_sp;
+};
+
+static inline struct clariion_dh_data
+ *get_clariion_data(struct scsi_device *sdev)
+{
+ return container_of(sdev->scsi_dh_data, struct clariion_dh_data,
+ dh_data);
+}
+
+/*
+ * Parse MODE_SELECT cmd reply.
+ */
+static int trespass_endio(struct scsi_device *sdev, char *sense)
+{
+ int err = SCSI_DH_IO;
+ struct scsi_sense_hdr sshdr;
+
+ if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
+ sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
+ "0x%2x, 0x%2x while sending CLARiiON trespass "
+ "command.\n", CLARIION_NAME, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
+
+ if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
+ (sshdr.ascq == 0x00)) {
+ /*
+ * Array based copy in progress -- do not send
+ * mode_select or copy will be aborted mid-stream.
+ */
+ sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
+ "progress while sending CLARiiON trespass "
+ "command.\n", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
+ (sshdr.ascq == 0x03)) {
+ /*
+ * LUN Not Ready - Manual Intervention Required
+ * indicates in-progress ucode upgrade (NDU).
+ */
+ sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
+ "ucode upgrade NDU operation while sending "
+ "CLARiiON trespass command.\n", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ } else
+ err = SCSI_DH_DEV_FAILED;
+ } else {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send MODE SELECT, no sense available\n",
+ CLARIION_NAME);
+ }
+ return err;
+}
+
+static int parse_sp_info_reply(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ int err = SCSI_DH_OK;
+
+ /* check for in-progress ucode upgrade (NDU) */
+ if (csdev->buffer[48] != 0) {
+ sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
+ "ucode upgrade NDU operation while finding "
+ "current active SP.", CLARIION_NAME);
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ goto out;
+ }
+ if (csdev->buffer[4] > 2) {
+ /* Invalid buffer format */
+ sdev_printk(KERN_NOTICE, sdev,
+ "%s: invalid VPD page 0xC0 format\n",
+ CLARIION_NAME);
+ err = SCSI_DH_NOSYS;
+ goto out;
+ }
+ switch (csdev->buffer[28] & 0x0f) {
+ case 6:
+ sdev_printk(KERN_NOTICE, sdev,
+ "%s: ALUA failover mode detected\n",
+ CLARIION_NAME);
+ break;
+ case 4:
+ /* Linux failover */
+ break;
+ default:
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid failover mode %d\n",
+ CLARIION_NAME, csdev->buffer[28] & 0x0f);
+ err = SCSI_DH_NOSYS;
+ goto out;
+ }
+
+ csdev->default_sp = csdev->buffer[5];
+ csdev->lun_state = csdev->buffer[4];
+ csdev->current_sp = csdev->buffer[8];
+ csdev->port = csdev->buffer[7];
+
+out:
+ return err;
+}
+
+#define emc_default_str "FC (Legacy)"
+
+static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
+{
+ unsigned char len = buffer[4] + 5;
+ char *sp_model = NULL;
+ unsigned char sp_len, serial_len;
+
+ if (len < 160) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid information section length %d\n",
+ CLARIION_NAME, len);
+ /* Check for old FC arrays */
+ if (!strncmp(buffer + 8, "DGC", 3)) {
+ /* Old FC array, not supporting extended information */
+ sp_model = emc_default_str;
+ }
+ goto out;
+ }
+
+ /*
+ * Parse extended information for SP model number
+ */
+ serial_len = buffer[160];
+ if (serial_len == 0 || serial_len + 161 > len) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid array serial number length %d\n",
+ CLARIION_NAME, serial_len);
+ goto out;
+ }
+ sp_len = buffer[99];
+ if (sp_len == 0 || serial_len + sp_len + 161 > len) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: Invalid model number length %d\n",
+ CLARIION_NAME, sp_len);
+ goto out;
+ }
+ sp_model = &buffer[serial_len + 161];
+ /* Strip whitespace at the end */
+ while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
+ sp_len--;
+
+ sp_model[sp_len] = '\0';
+
+out:
+ return sp_model;
+}
+
+/*
+ * Get block request for REQ_BLOCK_PC command issued to path. Currently
+ * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
+ *
+ * Uses data and sense buffers in hardware handler context structure and
+ * assumes serial servicing of commands, both issuance and completion.
+ */
+static struct request *get_req(struct scsi_device *sdev, int cmd,
+ unsigned char *buffer)
+{
+ struct request *rq;
+ int len = 0;
+
+ rq = blk_get_request(sdev->request_queue,
+ (cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
+ if (IS_ERR(rq)) {
+ sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
+ return NULL;
+ }
+
+ blk_rq_set_block_pc(rq);
+ rq->cmd_len = COMMAND_SIZE(cmd);
+ rq->cmd[0] = cmd;
+
+ switch (cmd) {
+ case MODE_SELECT:
+ len = sizeof(short_trespass);
+ rq->cmd[1] = 0x10;
+ rq->cmd[4] = len;
+ break;
+ case MODE_SELECT_10:
+ len = sizeof(long_trespass);
+ rq->cmd[1] = 0x10;
+ rq->cmd[8] = len;
+ break;
+ case INQUIRY:
+ len = CLARIION_BUFFER_SIZE;
+ rq->cmd[4] = len;
+ memset(buffer, 0, len);
+ break;
+ default:
+ BUG_ON(1);
+ break;
+ }
+
+ rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
+ REQ_FAILFAST_DRIVER;
+ rq->timeout = CLARIION_TIMEOUT;
+ rq->retries = CLARIION_RETRIES;
+
+ if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
+ blk_put_request(rq);
+ return NULL;
+ }
+
+ return rq;
+}
+
+static int send_inquiry_cmd(struct scsi_device *sdev, int page,
+ struct clariion_dh_data *csdev)
+{
+ struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
+ int err;
+
+ if (!rq)
+ return SCSI_DH_RES_TEMP_UNAVAIL;
+
+ rq->sense = csdev->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = csdev->senselen = 0;
+
+ rq->cmd[0] = INQUIRY;
+ if (page != 0) {
+ rq->cmd[1] = 1;
+ rq->cmd[2] = page;
+ }
+ err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+ if (err == -EIO) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send %s INQUIRY: %x\n",
+ CLARIION_NAME, page?"EVPD":"standard",
+ rq->errors);
+ csdev->senselen = rq->sense_len;
+ err = SCSI_DH_IO;
+ }
+
+ blk_put_request(rq);
+
+ return err;
+}
+
+static int send_trespass_cmd(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ struct request *rq;
+ unsigned char *page22;
+ int err, len, cmd;
+
+ if (csdev->flags & CLARIION_SHORT_TRESPASS) {
+ page22 = short_trespass;
+ if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+ /* Set Honor Reservations bit */
+ page22[6] |= 0x80;
+ len = sizeof(short_trespass);
+ cmd = MODE_SELECT;
+ } else {
+ page22 = long_trespass;
+ if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+ /* Set Honor Reservations bit */
+ page22[10] |= 0x80;
+ len = sizeof(long_trespass);
+ cmd = MODE_SELECT_10;
+ }
+ BUG_ON((len > CLARIION_BUFFER_SIZE));
+ memcpy(csdev->buffer, page22, len);
+
+ rq = get_req(sdev, cmd, csdev->buffer);
+ if (!rq)
+ return SCSI_DH_RES_TEMP_UNAVAIL;
+
+ rq->sense = csdev->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = csdev->senselen = 0;
+
+ err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+ if (err == -EIO) {
+ if (rq->sense_len) {
+ err = trespass_endio(sdev, csdev->sense);
+ } else {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: failed to send MODE SELECT: %x\n",
+ CLARIION_NAME, rq->errors);
+ }
+ }
+
+ blk_put_request(rq);
+
+ return err;
+}
+
+static int clariion_check_sense(struct scsi_device *sdev,
+ struct scsi_sense_hdr *sense_hdr)
+{
+ switch (sense_hdr->sense_key) {
+ case NOT_READY:
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
+ /*
+ * LUN Not Ready - Manual Intervention Required
+ * indicates this is a passive path.
+ *
+ * FIXME: However, if this is seen and EVPD C0
+ * indicates that this is due to a NDU in
+ * progress, we should set FAIL_PATH too.
+ * This indicates we might have to do a SCSI
+ * inquiry in the end_io path. Ugh.
+ *
+ * Can return FAILED only when we want the error
+ * recovery process to kick in.
+ */
+ return SUCCESS;
+ break;
+ case ILLEGAL_REQUEST:
+ if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
+ /*
+ * An array based copy is in progress. Do not
+ * fail the path, do not bypass to another PG,
+ * do not retry. Fail the IO immediately.
+ * (Actually this is the same conclusion as in
+ * the default handler, but lets make sure.)
+ *
+ * Can return FAILED only when we want the error
+ * recovery process to kick in.
+ */
+ return SUCCESS;
+ break;
+ case UNIT_ATTENTION:
+ if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+ /*
+ * Unit Attention Code. This is the first IO
+ * to the new path, so just retry.
+ */
+ return ADD_TO_MLQUEUE;
+ break;
+ }
+
+ return SCSI_RETURN_NOT_HANDLED;
+}
+
+static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+ struct clariion_dh_data *h = get_clariion_data(sdev);
+ int ret = BLKPREP_OK;
+
+ if (h->lun_state != CLARIION_LUN_OWNED) {
+ ret = BLKPREP_KILL;
+ req->cmd_flags |= REQ_QUIET;
+ }
+ return ret;
+
+}
+
+static int clariion_std_inquiry(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ int err;
+ char *sp_model;
+
+ err = send_inquiry_cmd(sdev, 0, csdev);
+ if (err != SCSI_DH_OK && csdev->senselen) {
+ struct scsi_sense_hdr sshdr;
+
+ if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+ &sshdr)) {
+ sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+ "%02x/%02x/%02x\n", CLARIION_NAME,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ }
+ err = SCSI_DH_IO;
+ goto out;
+ }
+
+ sp_model = parse_sp_model(sdev, csdev->buffer);
+ if (!sp_model) {
+ err = SCSI_DH_DEV_UNSUPP;
+ goto out;
+ }
+
+ /*
+ * FC Series arrays do not support long trespass
+ */
+ if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
+ csdev->flags |= CLARIION_SHORT_TRESPASS;
+
+ sdev_printk(KERN_INFO, sdev,
+ "%s: detected Clariion %s, flags %x\n",
+ CLARIION_NAME, sp_model, csdev->flags);
+out:
+ return err;
+}
+
+static int clariion_send_inquiry(struct scsi_device *sdev,
+ struct clariion_dh_data *csdev)
+{
+ int err, retry = CLARIION_RETRIES;
+
+retry:
+ err = send_inquiry_cmd(sdev, 0xC0, csdev);
+ if (err != SCSI_DH_OK && csdev->senselen) {
+ struct scsi_sense_hdr sshdr;
+
+ err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ if (!err)
+ return SCSI_DH_IO;
+
+ err = clariion_check_sense(sdev, &sshdr);
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
+ retry--;
+ goto retry;
+ }
+ sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+ "%02x/%02x/%02x\n", CLARIION_NAME,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ err = SCSI_DH_IO;
+ } else {
+ err = parse_sp_info_reply(sdev, csdev);
+ }
+ return err;
+}
+
+static int clariion_activate(struct scsi_device *sdev,
+ activate_complete fn, void *data)
+{
+ struct clariion_dh_data *csdev = get_clariion_data(sdev);
+ int result;
+
+ result = clariion_send_inquiry(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+
+ if (csdev->lun_state == CLARIION_LUN_OWNED)
+ goto done;
+
+ result = send_trespass_cmd(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+ sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
+ CLARIION_NAME,
+ csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
+
+ /* Update status */
+ result = clariion_send_inquiry(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+
+done:
+ sdev_printk(KERN_INFO, sdev,
+ "%s: at SP %c Port %d (%s, default SP %c)\n",
+ CLARIION_NAME, csdev->current_sp + 'A',
+ csdev->port, lun_state[csdev->lun_state],
+ csdev->default_sp + 'A');
+
+ if (fn)
+ fn(data, result);
+ return 0;
+}
+/*
+ * params - parameters in the following format
+ * "no_of_params\0param1\0param2\0param3\0...\0"
+ * for example, string for 2 parameters with value 10 and 21
+ * is specified as "2\010\021\0".
+ */
+static int clariion_set_params(struct scsi_device *sdev, const char *params)
+{
+ struct clariion_dh_data *csdev = get_clariion_data(sdev);
+ unsigned int hr = 0, st = 0, argc;
+ const char *p = params;
+ int result = SCSI_DH_OK;
+
+ if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
+ return -EINVAL;
+
+ while (*p++)
+ ;
+ if ((sscanf(p, "%u", &st) != 1) || (st > 1))
+ return -EINVAL;
+
+ while (*p++)
+ ;
+ if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
+ return -EINVAL;
+
+ if (st)
+ csdev->flags |= CLARIION_SHORT_TRESPASS;
+ else
+ csdev->flags &= ~CLARIION_SHORT_TRESPASS;
+
+ if (hr)
+ csdev->flags |= CLARIION_HONOR_RESERVATIONS;
+ else
+ csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
+
+ /*
+ * If this path is owned, we have to send a trespass command
+ * with the new parameters. If not, simply return. Next trespass
+ * command would use the parameters.
+ */
+ if (csdev->lun_state != CLARIION_LUN_OWNED)
+ goto done;
+
+ csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
+ result = send_trespass_cmd(sdev, csdev);
+ if (result != SCSI_DH_OK)
+ goto done;
+
+ /* Update status */
+ result = clariion_send_inquiry(sdev, csdev);
+
+done:
+ return result;
+}
+
+static const struct {
+ char *vendor;
+ char *model;
+} clariion_dev_list[] = {
+ {"DGC", "RAID"},
+ {"DGC", "DISK"},
+ {"DGC", "VRAID"},
+ {NULL, NULL},
+};
+
+static bool clariion_match(struct scsi_device *sdev)
+{
+ int i;
+
+ if (scsi_device_tpgs(sdev))
+ return false;
+
+ for (i = 0; clariion_dev_list[i].vendor; i++) {
+ if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
+ strlen(clariion_dev_list[i].vendor)) &&
+ !strncmp(sdev->model, clariion_dev_list[i].model,
+ strlen(clariion_dev_list[i].model))) {
+ return true;
+ }
+ }
+ return false;
+}
+
+static struct scsi_dh_data *clariion_bus_attach(struct scsi_device *sdev)
+{
+ struct clariion_dh_data *h;
+ int err;
+
+ h = kzalloc(sizeof(*h) , GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
+ h->lun_state = CLARIION_LUN_UNINITIALIZED;
+ h->default_sp = CLARIION_UNBOUND_LU;
+ h->current_sp = CLARIION_UNBOUND_LU;
+
+ err = clariion_std_inquiry(sdev, h);
+ if (err != SCSI_DH_OK)
+ goto failed;
+
+ err = clariion_send_inquiry(sdev, h);
+ if (err != SCSI_DH_OK)
+ goto failed;
+
+ sdev_printk(KERN_INFO, sdev,
+ "%s: connected to SP %c Port %d (%s, default SP %c)\n",
+ CLARIION_NAME, h->current_sp + 'A',
+ h->port, lun_state[h->lun_state],
+ h->default_sp + 'A');
+ return &h->dh_data;
+
+failed:
+ kfree(h);
+ return ERR_PTR(-EINVAL);
+}
+
+static void clariion_bus_detach(struct scsi_device *sdev)
+{
+ struct clariion_dh_data *h = get_clariion_data(sdev);
+
+ kfree(h);
+}
+
+static struct scsi_device_handler clariion_dh = {
+ .name = CLARIION_NAME,
+ .module = THIS_MODULE,
+ .attach = clariion_bus_attach,
+ .detach = clariion_bus_detach,
+ .check_sense = clariion_check_sense,
+ .activate = clariion_activate,
+ .prep_fn = clariion_prep_fn,
+ .set_params = clariion_set_params,
+ .match = clariion_match,
+};
+
+static int __init clariion_init(void)
+{
+ int r;
+
+ r = scsi_register_device_handler(&clariion_dh);
+ if (r != 0)
+ printk(KERN_ERR "%s: Failed to register scsi device handler.",
+ CLARIION_NAME);
+ return r;
+}
+
+static void __exit clariion_exit(void)
+{
+ scsi_unregister_device_handler(&clariion_dh);
+}
+
+module_init(clariion_init);
+module_exit(clariion_exit);
+
+MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff