--- /dev/null
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/firmware.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+
+#include "csio_hw.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+
+int csio_dbg_level = 0xFEFF;
+unsigned int csio_port_mask = 0xf;
+
+/* Default FW event queue entries. */
+static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE;
+
+/* Default MSI param level */
+int csio_msi = 2;
+
+/* FCoE function instances */
+static int dev_num;
+
+/* FCoE Adapter types & its description */
+static const struct csio_adap_desc csio_t5_fcoe_adapters[] = {
+ {"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"},
+ {"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"},
+ {"T522-CR 10G/1G", "Chelsio T522-CR 10G/1G [FCoE]"},
+ {"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"},
+ {"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"},
+ {"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"},
+ {"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"},
+ {"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"},
+ {"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"},
+ {"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"},
+ {"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"},
+ {"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"},
+ {"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"},
+ {"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"},
+ {"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"},
+ {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"},
+ {"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"},
+ {"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"},
+ {"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"},
+ {"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"},
+ {"T580-SO 40G", "Chelsio T580-SO 40G [FCoE]"},
+ {"T502-BT 1G", "Chelsio T502-BT 1G [FCoE]"}
+};
+
+static void csio_mgmtm_cleanup(struct csio_mgmtm *);
+static void csio_hw_mbm_cleanup(struct csio_hw *);
+
+/* State machine forward declarations */
+static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev);
+
+static void csio_hw_initialize(struct csio_hw *hw);
+static void csio_evtq_stop(struct csio_hw *hw);
+static void csio_evtq_start(struct csio_hw *hw);
+
+int csio_is_hw_ready(struct csio_hw *hw)
+{
+ return csio_match_state(hw, csio_hws_ready);
+}
+
+int csio_is_hw_removing(struct csio_hw *hw)
+{
+ return csio_match_state(hw, csio_hws_removing);
+}
+
+
+/*
+ * csio_hw_wait_op_done_val - wait until an operation is completed
+ * @hw: the HW module
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ * @valp: where to store the value of the register at completion time
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. If @valp is not NULL the value of the register
+ * at the time it indicated completion is stored there. Returns 0 if the
+ * operation completes and -EAGAIN otherwise.
+ */
+int
+csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask,
+ int polarity, int attempts, int delay, uint32_t *valp)
+{
+ uint32_t val;
+ while (1) {
+ val = csio_rd_reg32(hw, reg);
+
+ if (!!(val & mask) == polarity) {
+ if (valp)
+ *valp = val;
+ return 0;
+ }
+
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+/*
+ * csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register
+ * @hw: the adapter
+ * @addr: the indirect TP register address
+ * @mask: specifies the field within the register to modify
+ * @val: new value for the field
+ *
+ * Sets a field of an indirect TP register to the given value.
+ */
+void
+csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr,
+ unsigned int mask, unsigned int val)
+{
+ csio_wr_reg32(hw, addr, TP_PIO_ADDR_A);
+ val |= csio_rd_reg32(hw, TP_PIO_DATA_A) & ~mask;
+ csio_wr_reg32(hw, val, TP_PIO_DATA_A);
+}
+
+void
+csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask,
+ uint32_t value)
+{
+ uint32_t val = csio_rd_reg32(hw, reg) & ~mask;
+
+ csio_wr_reg32(hw, val | value, reg);
+ /* Flush */
+ csio_rd_reg32(hw, reg);
+
+}
+
+static int
+csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf)
+{
+ return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype,
+ addr, len, buf, 0);
+}
+
+/*
+ * EEPROM reads take a few tens of us while writes can take a bit over 5 ms.
+ */
+#define EEPROM_MAX_RD_POLL 40
+#define EEPROM_MAX_WR_POLL 6
+#define EEPROM_STAT_ADDR 0x7bfc
+#define VPD_BASE 0x400
+#define VPD_BASE_OLD 0
+#define VPD_LEN 1024
+#define VPD_INFO_FLD_HDR_SIZE 3
+
+/*
+ * csio_hw_seeprom_read - read a serial EEPROM location
+ * @hw: hw to read
+ * @addr: EEPROM virtual address
+ * @data: where to store the read data
+ *
+ * Read a 32-bit word from a location in serial EEPROM using the card's PCI
+ * VPD capability. Note that this function must be called with a virtual
+ * address.
+ */
+static int
+csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data)
+{
+ uint16_t val = 0;
+ int attempts = EEPROM_MAX_RD_POLL;
+ uint32_t base = hw->params.pci.vpd_cap_addr;
+
+ if (addr >= EEPROMVSIZE || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr);
+
+ do {
+ udelay(10);
+ pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val);
+ } while (!(val & PCI_VPD_ADDR_F) && --attempts);
+
+ if (!(val & PCI_VPD_ADDR_F)) {
+ csio_err(hw, "reading EEPROM address 0x%x failed\n", addr);
+ return -EINVAL;
+ }
+
+ pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data);
+ *data = le32_to_cpu(*(__le32 *)data);
+
+ return 0;
+}
+
+/*
+ * Partial EEPROM Vital Product Data structure. Includes only the ID and
+ * VPD-R sections.
+ */
+struct t4_vpd_hdr {
+ u8 id_tag;
+ u8 id_len[2];
+ u8 id_data[ID_LEN];
+ u8 vpdr_tag;
+ u8 vpdr_len[2];
+};
+
+/*
+ * csio_hw_get_vpd_keyword_val - Locates an information field keyword in
+ * the VPD
+ * @v: Pointer to buffered vpd data structure
+ * @kw: The keyword to search for
+ *
+ * Returns the value of the information field keyword or
+ * -EINVAL otherwise.
+ */
+static int
+csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw)
+{
+ int32_t i;
+ int32_t offset , len;
+ const uint8_t *buf = &v->id_tag;
+ const uint8_t *vpdr_len = &v->vpdr_tag;
+ offset = sizeof(struct t4_vpd_hdr);
+ len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8);
+
+ if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN)
+ return -EINVAL;
+
+ for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) {
+ if (memcmp(buf + i , kw, 2) == 0) {
+ i += VPD_INFO_FLD_HDR_SIZE;
+ return i;
+ }
+
+ i += VPD_INFO_FLD_HDR_SIZE + buf[i+2];
+ }
+
+ return -EINVAL;
+}
+
+static int
+csio_pci_capability(struct pci_dev *pdev, int cap, int *pos)
+{
+ *pos = pci_find_capability(pdev, cap);
+ if (*pos)
+ return 0;
+
+ return -1;
+}
+
+/*
+ * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM
+ * @hw: HW module
+ * @p: where to store the parameters
+ *
+ * Reads card parameters stored in VPD EEPROM.
+ */
+static int
+csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p)
+{
+ int i, ret, ec, sn, addr;
+ uint8_t *vpd, csum;
+ const struct t4_vpd_hdr *v;
+ /* To get around compilation warning from strstrip */
+ char *s;
+
+ if (csio_is_valid_vpd(hw))
+ return 0;
+
+ ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD,
+ &hw->params.pci.vpd_cap_addr);
+ if (ret)
+ return -EINVAL;
+
+ vpd = kzalloc(VPD_LEN, GFP_ATOMIC);
+ if (vpd == NULL)
+ return -ENOMEM;
+
+ /*
+ * Card information normally starts at VPD_BASE but early cards had
+ * it at 0.
+ */
+ ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd));
+ addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+ for (i = 0; i < VPD_LEN; i += 4) {
+ ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i));
+ if (ret) {
+ kfree(vpd);
+ return ret;
+ }
+ }
+
+ /* Reset the VPD flag! */
+ hw->flags &= (~CSIO_HWF_VPD_VALID);
+
+ v = (const struct t4_vpd_hdr *)vpd;
+
+#define FIND_VPD_KW(var, name) do { \
+ var = csio_hw_get_vpd_keyword_val(v, name); \
+ if (var < 0) { \
+ csio_err(hw, "missing VPD keyword " name "\n"); \
+ kfree(vpd); \
+ return -EINVAL; \
+ } \
+} while (0)
+
+ FIND_VPD_KW(i, "RV");
+ for (csum = 0; i >= 0; i--)
+ csum += vpd[i];
+
+ if (csum) {
+ csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum);
+ kfree(vpd);
+ return -EINVAL;
+ }
+ FIND_VPD_KW(ec, "EC");
+ FIND_VPD_KW(sn, "SN");
+#undef FIND_VPD_KW
+
+ memcpy(p->id, v->id_data, ID_LEN);
+ s = strstrip(p->id);
+ memcpy(p->ec, vpd + ec, EC_LEN);
+ s = strstrip(p->ec);
+ i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2];
+ memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
+ s = strstrip(p->sn);
+
+ csio_valid_vpd_copied(hw);
+
+ kfree(vpd);
+ return 0;
+}
+
+/*
+ * csio_hw_sf1_read - read data from the serial flash
+ * @hw: the HW module
+ * @byte_cnt: number of bytes to read
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @valp: where to store the read data
+ *
+ * Reads up to 4 bytes of data from the serial flash. The location of
+ * the read needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int
+csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont,
+ int32_t lock, uint32_t *valp)
+{
+ int ret;
+
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F)
+ return -EBUSY;
+
+ csio_wr_reg32(hw, SF_LOCK_V(lock) | SF_CONT_V(cont) |
+ BYTECNT_V(byte_cnt - 1), SF_OP_A);
+ ret = csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS,
+ 10, NULL);
+ if (!ret)
+ *valp = csio_rd_reg32(hw, SF_DATA_A);
+ return ret;
+}
+
+/*
+ * csio_hw_sf1_write - write data to the serial flash
+ * @hw: the HW module
+ * @byte_cnt: number of bytes to write
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @val: value to write
+ *
+ * Writes up to 4 bytes of data to the serial flash. The location of
+ * the write needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int
+csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont,
+ int32_t lock, uint32_t val)
+{
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F)
+ return -EBUSY;
+
+ csio_wr_reg32(hw, val, SF_DATA_A);
+ csio_wr_reg32(hw, SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) |
+ OP_V(1) | SF_LOCK_V(lock), SF_OP_A);
+
+ return csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS,
+ 10, NULL);
+}
+
+/*
+ * csio_hw_flash_wait_op - wait for a flash operation to complete
+ * @hw: the HW module
+ * @attempts: max number of polls of the status register
+ * @delay: delay between polls in ms
+ *
+ * Wait for a flash operation to complete by polling the status register.
+ */
+static int
+csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay)
+{
+ int ret;
+ uint32_t status;
+
+ while (1) {
+ ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS);
+ if (ret != 0)
+ return ret;
+
+ ret = csio_hw_sf1_read(hw, 1, 0, 1, &status);
+ if (ret != 0)
+ return ret;
+
+ if (!(status & 1))
+ return 0;
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ msleep(delay);
+ }
+}
+
+/*
+ * csio_hw_read_flash - read words from serial flash
+ * @hw: the HW module
+ * @addr: the start address for the read
+ * @nwords: how many 32-bit words to read
+ * @data: where to store the read data
+ * @byte_oriented: whether to store data as bytes or as words
+ *
+ * Read the specified number of 32-bit words from the serial flash.
+ * If @byte_oriented is set the read data is stored as a byte array
+ * (i.e., big-endian), otherwise as 32-bit words in the platform's
+ * natural endianess.
+ */
+static int
+csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords,
+ uint32_t *data, int32_t byte_oriented)
+{
+ int ret;
+
+ if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3))
+ return -EINVAL;
+
+ addr = swab32(addr) | SF_RD_DATA_FAST;
+
+ ret = csio_hw_sf1_write(hw, 4, 1, 0, addr);
+ if (ret != 0)
+ return ret;
+
+ ret = csio_hw_sf1_read(hw, 1, 1, 0, data);
+ if (ret != 0)
+ return ret;
+
+ for ( ; nwords; nwords--, data++) {
+ ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data);
+ if (nwords == 1)
+ csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */
+ if (ret)
+ return ret;
+ if (byte_oriented)
+ *data = (__force __u32) htonl(*data);
+ }
+ return 0;
+}
+
+/*
+ * csio_hw_write_flash - write up to a page of data to the serial flash
+ * @hw: the hw
+ * @addr: the start address to write
+ * @n: length of data to write in bytes
+ * @data: the data to write
+ *
+ * Writes up to a page of data (256 bytes) to the serial flash starting
+ * at the given address. All the data must be written to the same page.
+ */
+static int
+csio_hw_write_flash(struct csio_hw *hw, uint32_t addr,
+ uint32_t n, const uint8_t *data)
+{
+ int ret = -EINVAL;
+ uint32_t buf[64];
+ uint32_t i, c, left, val, offset = addr & 0xff;
+
+ if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE)
+ return -EINVAL;
+
+ val = swab32(addr) | SF_PROG_PAGE;
+
+ ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE);
+ if (ret != 0)
+ goto unlock;
+
+ ret = csio_hw_sf1_write(hw, 4, 1, 1, val);
+ if (ret != 0)
+ goto unlock;
+
+ for (left = n; left; left -= c) {
+ c = min(left, 4U);
+ for (val = 0, i = 0; i < c; ++i)
+ val = (val << 8) + *data++;
+
+ ret = csio_hw_sf1_write(hw, c, c != left, 1, val);
+ if (ret)
+ goto unlock;
+ }
+ ret = csio_hw_flash_wait_op(hw, 8, 1);
+ if (ret)
+ goto unlock;
+
+ csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */
+
+ /* Read the page to verify the write succeeded */
+ ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+ if (ret)
+ return ret;
+
+ if (memcmp(data - n, (uint8_t *)buf + offset, n)) {
+ csio_err(hw,
+ "failed to correctly write the flash page at %#x\n",
+ addr);
+ return -EINVAL;
+ }
+
+ return 0;
+
+unlock:
+ csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */
+ return ret;
+}
+
+/*
+ * csio_hw_flash_erase_sectors - erase a range of flash sectors
+ * @hw: the HW module
+ * @start: the first sector to erase
+ * @end: the last sector to erase
+ *
+ * Erases the sectors in the given inclusive range.
+ */
+static int
+csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end)
+{
+ int ret = 0;
+
+ while (start <= end) {
+
+ ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE);
+ if (ret != 0)
+ goto out;
+
+ ret = csio_hw_sf1_write(hw, 4, 0, 1,
+ SF_ERASE_SECTOR | (start << 8));
+ if (ret != 0)
+ goto out;
+
+ ret = csio_hw_flash_wait_op(hw, 14, 500);
+ if (ret != 0)
+ goto out;
+
+ start++;
+ }
+out:
+ if (ret)
+ csio_err(hw, "erase of flash sector %d failed, error %d\n",
+ start, ret);
+ csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */
+ return 0;
+}
+
+static void
+csio_hw_print_fw_version(struct csio_hw *hw, char *str)
+{
+ csio_info(hw, "%s: %u.%u.%u.%u\n", str,
+ FW_HDR_FW_VER_MAJOR_G(hw->fwrev),
+ FW_HDR_FW_VER_MINOR_G(hw->fwrev),
+ FW_HDR_FW_VER_MICRO_G(hw->fwrev),
+ FW_HDR_FW_VER_BUILD_G(hw->fwrev));
+}
+
+/*
+ * csio_hw_get_fw_version - read the firmware version
+ * @hw: HW module
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+static int
+csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers)
+{
+ return csio_hw_read_flash(hw, FLASH_FW_START +
+ offsetof(struct fw_hdr, fw_ver), 1,
+ vers, 0);
+}
+
+/*
+ * csio_hw_get_tp_version - read the TP microcode version
+ * @hw: HW module
+ * @vers: where to place the version
+ *
+ * Reads the TP microcode version from flash.
+ */
+static int
+csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers)
+{
+ return csio_hw_read_flash(hw, FLASH_FW_START +
+ offsetof(struct fw_hdr, tp_microcode_ver), 1,
+ vers, 0);
+}
+
+/*
+ * csio_hw_fw_dload - download firmware.
+ * @hw: HW module
+ * @fw_data: firmware image to write.
+ * @size: image size
+ *
+ * Write the supplied firmware image to the card's serial flash.
+ */
+static int
+csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
+{
+ uint32_t csum;
+ int32_t addr;
+ int ret;
+ uint32_t i;
+ uint8_t first_page[SF_PAGE_SIZE];
+ const __be32 *p = (const __be32 *)fw_data;
+ struct fw_hdr *hdr = (struct fw_hdr *)fw_data;
+ uint32_t sf_sec_size;
+
+ if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) {
+ csio_err(hw, "Serial Flash data invalid\n");
+ return -EINVAL;
+ }
+
+ if (!size) {
+ csio_err(hw, "FW image has no data\n");
+ return -EINVAL;
+ }
+
+ if (size & 511) {
+ csio_err(hw, "FW image size not multiple of 512 bytes\n");
+ return -EINVAL;
+ }
+
+ if (ntohs(hdr->len512) * 512 != size) {
+ csio_err(hw, "FW image size differs from size in FW header\n");
+ return -EINVAL;
+ }
+
+ if (size > FLASH_FW_MAX_SIZE) {
+ csio_err(hw, "FW image too large, max is %u bytes\n",
+ FLASH_FW_MAX_SIZE);
+ return -EINVAL;
+ }
+
+ for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+
+ if (csum != 0xffffffff) {
+ csio_err(hw, "corrupted firmware image, checksum %#x\n", csum);
+ return -EINVAL;
+ }
+
+ sf_sec_size = hw->params.sf_size / hw->params.sf_nsec;
+ i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
+
+ csio_dbg(hw, "Erasing sectors... start:%d end:%d\n",
+ FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1);
+
+ ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC,
+ FLASH_FW_START_SEC + i - 1);
+ if (ret) {
+ csio_err(hw, "Flash Erase failed\n");
+ goto out;
+ }
+
+ /*
+ * We write the correct version at the end so the driver can see a bad
+ * version if the FW write fails. Start by writing a copy of the
+ * first page with a bad version.
+ */
+ memcpy(first_page, fw_data, SF_PAGE_SIZE);
+ ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
+ ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page);
+ if (ret)
+ goto out;
+
+ csio_dbg(hw, "Writing Flash .. start:%d end:%d\n",
+ FW_IMG_START, FW_IMG_START + size);
+
+ addr = FLASH_FW_START;
+ for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
+ addr += SF_PAGE_SIZE;
+ fw_data += SF_PAGE_SIZE;
+ ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data);
+ if (ret)
+ goto out;
+ }
+
+ ret = csio_hw_write_flash(hw,
+ FLASH_FW_START +
+ offsetof(struct fw_hdr, fw_ver),
+ sizeof(hdr->fw_ver),
+ (const uint8_t *)&hdr->fw_ver);
+
+out:
+ if (ret)
+ csio_err(hw, "firmware download failed, error %d\n", ret);
+ return ret;
+}
+
+static int
+csio_hw_get_flash_params(struct csio_hw *hw)
+{
+ int ret;
+ uint32_t info = 0;
+
+ ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID);
+ if (!ret)
+ ret = csio_hw_sf1_read(hw, 3, 0, 1, &info);
+ csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */
+ if (ret != 0)
+ return ret;
+
+ if ((info & 0xff) != 0x20) /* not a Numonix flash */
+ return -EINVAL;
+ info >>= 16; /* log2 of size */
+ if (info >= 0x14 && info < 0x18)
+ hw->params.sf_nsec = 1 << (info - 16);
+ else if (info == 0x18)
+ hw->params.sf_nsec = 64;
+ else
+ return -EINVAL;
+ hw->params.sf_size = 1 << info;
+
+ return 0;
+}
+
+/*****************************************************************************/
+/* HW State machine assists */
+/*****************************************************************************/
+
+static int
+csio_hw_dev_ready(struct csio_hw *hw)
+{
+ uint32_t reg;
+ int cnt = 6;
+
+ while (((reg = csio_rd_reg32(hw, PL_WHOAMI_A)) == 0xFFFFFFFF) &&
+ (--cnt != 0))
+ mdelay(100);
+
+ if ((cnt == 0) && (((int32_t)(SOURCEPF_G(reg)) < 0) ||
+ (SOURCEPF_G(reg) >= CSIO_MAX_PFN))) {
+ csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt);
+ return -EIO;
+ }
+
+ hw->pfn = SOURCEPF_G(reg);
+
+ return 0;
+}
+
+/*
+ * csio_do_hello - Perform the HELLO FW Mailbox command and process response.
+ * @hw: HW module
+ * @state: Device state
+ *
+ * FW_HELLO_CMD has to be polled for completion.
+ */
+static int
+csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state)
+{
+ struct csio_mb *mbp;
+ int rv = 0;
+ enum fw_retval retval;
+ uint8_t mpfn;
+ char state_str[16];
+ int retries = FW_CMD_HELLO_RETRIES;
+
+ memset(state_str, 0, sizeof(state_str));
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ rv = -ENOMEM;
+ CSIO_INC_STATS(hw, n_err_nomem);
+ goto out;
+ }
+
+retry:
+ csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn,
+ hw->pfn, CSIO_MASTER_MAY, NULL);
+
+ rv = csio_mb_issue(hw, mbp);
+ if (rv) {
+ csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv);
+ goto out_free_mb;
+ }
+
+ csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "HELLO cmd failed with ret: %d\n", retval);
+ rv = -EINVAL;
+ goto out_free_mb;
+ }
+
+ /* Firmware has designated us to be master */
+ if (hw->pfn == mpfn) {
+ hw->flags |= CSIO_HWF_MASTER;
+ } else if (*state == CSIO_DEV_STATE_UNINIT) {
+ /*
+ * If we're not the Master PF then we need to wait around for
+ * the Master PF Driver to finish setting up the adapter.
+ *
+ * Note that we also do this wait if we're a non-Master-capable
+ * PF and there is no current Master PF; a Master PF may show up
+ * momentarily and we wouldn't want to fail pointlessly. (This
+ * can happen when an OS loads lots of different drivers rapidly
+ * at the same time). In this case, the Master PF returned by
+ * the firmware will be PCIE_FW_MASTER_MASK so the test below
+ * will work ...
+ */
+
+ int waiting = FW_CMD_HELLO_TIMEOUT;
+
+ /*
+ * Wait for the firmware to either indicate an error or
+ * initialized state. If we see either of these we bail out
+ * and report the issue to the caller. If we exhaust the
+ * "hello timeout" and we haven't exhausted our retries, try
+ * again. Otherwise bail with a timeout error.
+ */
+ for (;;) {
+ uint32_t pcie_fw;
+
+ spin_unlock_irq(&hw->lock);
+ msleep(50);
+ spin_lock_irq(&hw->lock);
+ waiting -= 50;
+
+ /*
+ * If neither Error nor Initialialized are indicated
+ * by the firmware keep waiting till we exaust our
+ * timeout ... and then retry if we haven't exhausted
+ * our retries ...
+ */
+ pcie_fw = csio_rd_reg32(hw, PCIE_FW_A);
+ if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) {
+ if (waiting <= 0) {
+ if (retries-- > 0)
+ goto retry;
+
+ rv = -ETIMEDOUT;
+ break;
+ }
+ continue;
+ }
+
+ /*
+ * We either have an Error or Initialized condition
+ * report errors preferentially.
+ */
+ if (state) {
+ if (pcie_fw & PCIE_FW_ERR_F) {
+ *state = CSIO_DEV_STATE_ERR;
+ rv = -ETIMEDOUT;
+ } else if (pcie_fw & PCIE_FW_INIT_F)
+ *state = CSIO_DEV_STATE_INIT;
+ }
+
+ /*
+ * If we arrived before a Master PF was selected and
+ * there's not a valid Master PF, grab its identity
+ * for our caller.
+ */
+ if (mpfn == PCIE_FW_MASTER_M &&
+ (pcie_fw & PCIE_FW_MASTER_VLD_F))
+ mpfn = PCIE_FW_MASTER_G(pcie_fw);
+ break;
+ }
+ hw->flags &= ~CSIO_HWF_MASTER;
+ }
+
+ switch (*state) {
+ case CSIO_DEV_STATE_UNINIT:
+ strcpy(state_str, "Initializing");
+ break;
+ case CSIO_DEV_STATE_INIT:
+ strcpy(state_str, "Initialized");
+ break;
+ case CSIO_DEV_STATE_ERR:
+ strcpy(state_str, "Error");
+ break;
+ default:
+ strcpy(state_str, "Unknown");
+ break;
+ }
+
+ if (hw->pfn == mpfn)
+ csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n",
+ hw->pfn, state_str);
+ else
+ csio_info(hw,
+ "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n",
+ hw->pfn, mpfn, state_str);
+
+out_free_mb:
+ mempool_free(mbp, hw->mb_mempool);
+out:
+ return rv;
+}
+
+/*
+ * csio_do_bye - Perform the BYE FW Mailbox command and process response.
+ * @hw: HW module
+ *
+ */
+static int
+csio_do_bye(struct csio_hw *hw)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of BYE command failed\n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ mempool_free(mbp, hw->mb_mempool);
+
+ return 0;
+}
+
+/*
+ * csio_do_reset- Perform the device reset.
+ * @hw: HW module
+ * @fw_rst: FW reset
+ *
+ * If fw_rst is set, issues FW reset mbox cmd otherwise
+ * does PIO reset.
+ * Performs reset of the function.
+ */
+static int
+csio_do_reset(struct csio_hw *hw, bool fw_rst)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+
+ if (!fw_rst) {
+ /* PIO reset */
+ csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A);
+ mdelay(2000);
+ return 0;
+ }
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO,
+ PIORSTMODE_F | PIORST_F, 0, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of RESET command failed.n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ mempool_free(mbp, hw->mb_mempool);
+
+ return 0;
+}
+
+static int
+csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp)
+{
+ struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb;
+ uint16_t caps;
+
+ caps = ntohs(rsp->fcoecaps);
+
+ if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) {
+ csio_err(hw, "No FCoE Initiator capability in the firmware.\n");
+ return -EINVAL;
+ }
+
+ if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) {
+ csio_err(hw, "No FCoE Control Offload capability\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET
+ * @hw: the HW module
+ * @mbox: mailbox to use for the FW RESET command (if desired)
+ * @force: force uP into RESET even if FW RESET command fails
+ *
+ * Issues a RESET command to firmware (if desired) with a HALT indication
+ * and then puts the microprocessor into RESET state. The RESET command
+ * will only be issued if a legitimate mailbox is provided (mbox <=
+ * PCIE_FW_MASTER_MASK).
+ *
+ * This is generally used in order for the host to safely manipulate the
+ * adapter without fear of conflicting with whatever the firmware might
+ * be doing. The only way out of this state is to RESTART the firmware
+ * ...
+ */
+static int
+csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force)
+{
+ enum fw_retval retval = 0;
+
+ /*
+ * If a legitimate mailbox is provided, issue a RESET command
+ * with a HALT indication.
+ */
+ if (mbox <= PCIE_FW_MASTER_M) {
+ struct csio_mb *mbp;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO,
+ PIORSTMODE_F | PIORST_F, FW_RESET_CMD_HALT_F,
+ NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of RESET command failed!\n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ mempool_free(mbp, hw->mb_mempool);
+ }
+
+ /*
+ * Normally we won't complete the operation if the firmware RESET
+ * command fails but if our caller insists we'll go ahead and put the
+ * uP into RESET. This can be useful if the firmware is hung or even
+ * missing ... We'll have to take the risk of putting the uP into
+ * RESET without the cooperation of firmware in that case.
+ *
+ * We also force the firmware's HALT flag to be on in case we bypassed
+ * the firmware RESET command above or we're dealing with old firmware
+ * which doesn't have the HALT capability. This will serve as a flag
+ * for the incoming firmware to know that it's coming out of a HALT
+ * rather than a RESET ... if it's new enough to understand that ...
+ */
+ if (retval == 0 || force) {
+ csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F);
+ csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F,
+ PCIE_FW_HALT_F);
+ }
+
+ /*
+ * And we always return the result of the firmware RESET command
+ * even when we force the uP into RESET ...
+ */
+ return retval ? -EINVAL : 0;
+}
+
+/*
+ * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET
+ * @hw: the HW module
+ * @reset: if we want to do a RESET to restart things
+ *
+ * Restart firmware previously halted by csio_hw_fw_halt(). On successful
+ * return the previous PF Master remains as the new PF Master and there
+ * is no need to issue a new HELLO command, etc.
+ *
+ * We do this in two ways:
+ *
+ * 1. If we're dealing with newer firmware we'll simply want to take
+ * the chip's microprocessor out of RESET. This will cause the
+ * firmware to start up from its start vector. And then we'll loop
+ * until the firmware indicates it's started again (PCIE_FW.HALT
+ * reset to 0) or we timeout.
+ *
+ * 2. If we're dealing with older firmware then we'll need to RESET
+ * the chip since older firmware won't recognize the PCIE_FW.HALT
+ * flag and automatically RESET itself on startup.
+ */
+static int
+csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset)
+{
+ if (reset) {
+ /*
+ * Since we're directing the RESET instead of the firmware
+ * doing it automatically, we need to clear the PCIE_FW.HALT
+ * bit.
+ */
+ csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, 0);
+
+ /*
+ * If we've been given a valid mailbox, first try to get the
+ * firmware to do the RESET. If that works, great and we can
+ * return success. Otherwise, if we haven't been given a
+ * valid mailbox or the RESET command failed, fall back to
+ * hitting the chip with a hammer.
+ */
+ if (mbox <= PCIE_FW_MASTER_M) {
+ csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0);
+ msleep(100);
+ if (csio_do_reset(hw, true) == 0)
+ return 0;
+ }
+
+ csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A);
+ msleep(2000);
+ } else {
+ int ms;
+
+ csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0);
+ for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
+ if (!(csio_rd_reg32(hw, PCIE_FW_A) & PCIE_FW_HALT_F))
+ return 0;
+ msleep(100);
+ ms += 100;
+ }
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW
+ * @hw: the HW module
+ * @mbox: mailbox to use for the FW RESET command (if desired)
+ * @fw_data: the firmware image to write
+ * @size: image size
+ * @force: force upgrade even if firmware doesn't cooperate
+ *
+ * Perform all of the steps necessary for upgrading an adapter's
+ * firmware image. Normally this requires the cooperation of the
+ * existing firmware in order to halt all existing activities
+ * but if an invalid mailbox token is passed in we skip that step
+ * (though we'll still put the adapter microprocessor into RESET in
+ * that case).
+ *
+ * On successful return the new firmware will have been loaded and
+ * the adapter will have been fully RESET losing all previous setup
+ * state. On unsuccessful return the adapter may be completely hosed ...
+ * positive errno indicates that the adapter is ~probably~ intact, a
+ * negative errno indicates that things are looking bad ...
+ */
+static int
+csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox,
+ const u8 *fw_data, uint32_t size, int32_t force)
+{
+ const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
+ int reset, ret;
+
+ ret = csio_hw_fw_halt(hw, mbox, force);
+ if (ret != 0 && !force)
+ return ret;
+
+ ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size);
+ if (ret != 0)
+ return ret;
+
+ /*
+ * Older versions of the firmware don't understand the new
+ * PCIE_FW.HALT flag and so won't know to perform a RESET when they
+ * restart. So for newly loaded older firmware we'll have to do the
+ * RESET for it so it starts up on a clean slate. We can tell if
+ * the newly loaded firmware will handle this right by checking
+ * its header flags to see if it advertises the capability.
+ */
+ reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
+ return csio_hw_fw_restart(hw, mbox, reset);
+}
+
+/*
+ * csio_get_device_params - Get device parameters.
+ * @hw: HW module
+ *
+ */
+static int
+csio_get_device_params(struct csio_hw *hw)
+{
+ struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+ u32 param[6];
+ int i, j = 0;
+
+ /* Initialize portids to -1 */
+ for (i = 0; i < CSIO_MAX_PPORTS; i++)
+ hw->pport[i].portid = -1;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ /* Get port vec information. */
+ param[0] = FW_PARAM_DEV(PORTVEC);
+
+ /* Get Core clock. */
+ param[1] = FW_PARAM_DEV(CCLK);
+
+ /* Get EQ id start and end. */
+ param[2] = FW_PARAM_PFVF(EQ_START);
+ param[3] = FW_PARAM_PFVF(EQ_END);
+
+ /* Get IQ id start and end. */
+ param[4] = FW_PARAM_PFVF(IQFLINT_START);
+ param[5] = FW_PARAM_PFVF(IQFLINT_END);
+
+ csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0,
+ ARRAY_SIZE(param), param, NULL, false, NULL);
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ csio_mb_process_read_params_rsp(hw, mbp, &retval,
+ ARRAY_SIZE(param), param);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n",
+ retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ /* cache the information. */
+ hw->port_vec = param[0];
+ hw->vpd.cclk = param[1];
+ wrm->fw_eq_start = param[2];
+ wrm->fw_iq_start = param[4];
+
+ /* Using FW configured max iqs & eqs */
+ if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) ||
+ !csio_is_hw_master(hw)) {
+ hw->cfg_niq = param[5] - param[4] + 1;
+ hw->cfg_neq = param[3] - param[2] + 1;
+ csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n",
+ hw->cfg_niq, hw->cfg_neq);
+ }
+
+ hw->port_vec &= csio_port_mask;
+
+ hw->num_pports = hweight32(hw->port_vec);
+
+ csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n",
+ hw->port_vec, hw->num_pports);
+
+ for (i = 0; i < hw->num_pports; i++) {
+ while ((hw->port_vec & (1 << j)) == 0)
+ j++;
+ hw->pport[i].portid = j++;
+ csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid);
+ }
+ mempool_free(mbp, hw->mb_mempool);
+
+ return 0;
+}
+
+
+/*
+ * csio_config_device_caps - Get and set device capabilities.
+ * @hw: HW module
+ *
+ */
+static int
+csio_config_device_caps(struct csio_hw *hw)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+ int rv = -EINVAL;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ /* Get device capabilities */
+ csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n");
+ goto out;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval);
+ goto out;
+ }
+
+ /* Validate device capabilities */
+ rv = csio_hw_validate_caps(hw, mbp);
+ if (rv != 0)
+ goto out;
+
+ /* Don't config device capabilities if already configured */
+ if (hw->fw_state == CSIO_DEV_STATE_INIT) {
+ rv = 0;
+ goto out;
+ }
+
+ /* Write back desired device capabilities */
+ csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true,
+ false, true, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n");
+ goto out;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval);
+ goto out;
+ }
+
+ rv = 0;
+out:
+ mempool_free(mbp, hw->mb_mempool);
+ return rv;
+}
+
+/*
+ * csio_enable_ports - Bring up all available ports.
+ * @hw: HW module.
+ *
+ */
+static int
+csio_enable_ports(struct csio_hw *hw)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+ uint8_t portid;
+ int i;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < hw->num_pports; i++) {
+ portid = hw->pport[i].portid;
+
+ /* Read PORT information */
+ csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid,
+ false, 0, 0, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n",
+ portid);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ csio_mb_process_read_port_rsp(hw, mbp, &retval,
+ &hw->pport[i].pcap);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n",
+ portid, retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ /* Write back PORT information */
+ csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true,
+ (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n",
+ portid);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n",
+ portid, retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ } /* For all ports */
+
+ mempool_free(mbp, hw->mb_mempool);
+
+ return 0;
+}
+
+/*
+ * csio_get_fcoe_resinfo - Read fcoe fw resource info.
+ * @hw: HW module
+ * Issued with lock held.
+ */
+static int
+csio_get_fcoe_resinfo(struct csio_hw *hw)
+{
+ struct csio_fcoe_res_info *res_info = &hw->fres_info;
+ struct fw_fcoe_res_info_cmd *rsp;
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ /* Get FCoE FW resource information */
+ csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb);
+ retval = FW_CMD_RETVAL_G(ntohl(rsp->retval_len16));
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n",
+ retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ res_info->e_d_tov = ntohs(rsp->e_d_tov);
+ res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq);
+ res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els);
+ res_info->r_r_tov = ntohs(rsp->r_r_tov);
+ res_info->max_xchgs = ntohl(rsp->max_xchgs);
+ res_info->max_ssns = ntohl(rsp->max_ssns);
+ res_info->used_xchgs = ntohl(rsp->used_xchgs);
+ res_info->used_ssns = ntohl(rsp->used_ssns);
+ res_info->max_fcfs = ntohl(rsp->max_fcfs);
+ res_info->max_vnps = ntohl(rsp->max_vnps);
+ res_info->used_fcfs = ntohl(rsp->used_fcfs);
+ res_info->used_vnps = ntohl(rsp->used_vnps);
+
+ csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns,
+ res_info->max_xchgs);
+ mempool_free(mbp, hw->mb_mempool);
+
+ return 0;
+}
+
+static int
+csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+ u32 _param[1];
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+
+ /*
+ * Find out whether we're dealing with a version of
+ * the firmware which has configuration file support.
+ */
+ _param[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF));
+
+ csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0,
+ ARRAY_SIZE(_param), _param, NULL, false, NULL);
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n");
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ csio_mb_process_read_params_rsp(hw, mbp, &retval,
+ ARRAY_SIZE(_param), _param);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n",
+ retval);
+ mempool_free(mbp, hw->mb_mempool);
+ return -EINVAL;
+ }
+
+ mempool_free(mbp, hw->mb_mempool);
+ *param = _param[0];
+
+ return 0;
+}
+
+static int
+csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path)
+{
+ int ret = 0;
+ const struct firmware *cf;
+ struct pci_dev *pci_dev = hw->pdev;
+ struct device *dev = &pci_dev->dev;
+ unsigned int mtype = 0, maddr = 0;
+ uint32_t *cfg_data;
+ int value_to_add = 0;
+
+ if (request_firmware(&cf, FW_CFG_NAME_T5, dev) < 0) {
+ csio_err(hw, "could not find config file %s, err: %d\n",
+ FW_CFG_NAME_T5, ret);
+ return -ENOENT;
+ }
+
+ if (cf->size%4 != 0)
+ value_to_add = 4 - (cf->size % 4);
+
+ cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL);
+ if (cfg_data == NULL) {
+ ret = -ENOMEM;
+ goto leave;
+ }
+
+ memcpy((void *)cfg_data, (const void *)cf->data, cf->size);
+ if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) {
+ ret = -EINVAL;
+ goto leave;
+ }
+
+ mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param);
+ maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16;
+
+ ret = csio_memory_write(hw, mtype, maddr,
+ cf->size + value_to_add, cfg_data);
+
+ if ((ret == 0) && (value_to_add != 0)) {
+ union {
+ u32 word;
+ char buf[4];
+ } last;
+ size_t size = cf->size & ~0x3;
+ int i;
+
+ last.word = cfg_data[size >> 2];
+ for (i = value_to_add; i < 4; i++)
+ last.buf[i] = 0;
+ ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word);
+ }
+ if (ret == 0) {
+ csio_info(hw, "config file upgraded to %s\n",
+ FW_CFG_NAME_T5);
+ snprintf(path, 64, "%s%s", "/lib/firmware/", FW_CFG_NAME_T5);
+ }
+
+leave:
+ kfree(cfg_data);
+ release_firmware(cf);
+ return ret;
+}
+
+/*
+ * HW initialization: contact FW, obtain config, perform basic init.
+ *
+ * If the firmware we're dealing with has Configuration File support, then
+ * we use that to perform all configuration -- either using the configuration
+ * file stored in flash on the adapter or using a filesystem-local file
+ * if available.
+ *
+ * If we don't have configuration file support in the firmware, then we'll
+ * have to set things up the old fashioned way with hard-coded register
+ * writes and firmware commands ...
+ */
+
+/*
+ * Attempt to initialize the HW via a Firmware Configuration File.
+ */
+static int
+csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
+{
+ struct csio_mb *mbp = NULL;
+ struct fw_caps_config_cmd *caps_cmd;
+ unsigned int mtype, maddr;
+ int rv = -EINVAL;
+ uint32_t finiver = 0, finicsum = 0, cfcsum = 0;
+ char path[64];
+ char *config_name = NULL;
+
+ /*
+ * Reset device if necessary
+ */
+ if (reset) {
+ rv = csio_do_reset(hw, true);
+ if (rv != 0)
+ goto bye;
+ }
+
+ /*
+ * If we have a configuration file in host ,
+ * then use that. Otherwise, use the configuration file stored
+ * in the HW flash ...
+ */
+ spin_unlock_irq(&hw->lock);
+ rv = csio_hw_flash_config(hw, fw_cfg_param, path);
+ spin_lock_irq(&hw->lock);
+ if (rv != 0) {
+ /*
+ * config file was not found. Use default
+ * config file from flash.
+ */
+ config_name = "On FLASH";
+ mtype = FW_MEMTYPE_CF_FLASH;
+ maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
+ } else {
+ config_name = path;
+ mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param);
+ maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16;
+ }
+
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp) {
+ CSIO_INC_STATS(hw, n_err_nomem);
+ return -ENOMEM;
+ }
+ /*
+ * Tell the firmware to process the indicated Configuration File.
+ * If there are no errors and the caller has provided return value
+ * pointers for the [fini] section version, checksum and computed
+ * checksum, pass those back to the caller.
+ */
+ caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
+ CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
+ caps_cmd->op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd->cfvalid_to_len16 =
+ htonl(FW_CAPS_CONFIG_CMD_CFVALID_F |
+ FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) |
+ FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) |
+ FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
+ goto bye;
+ }
+
+ rv = csio_mb_fw_retval(mbp);
+ /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware
+ * Configuration File in FLASH), our last gasp effort is to use the
+ * Firmware Configuration File which is embedded in the
+ * firmware. A very few early versions of the firmware didn't
+ * have one embedded but we can ignore those.
+ */
+ if (rv == ENOENT) {
+ CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
+ caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
+ goto bye;
+ }
+
+ rv = csio_mb_fw_retval(mbp);
+ config_name = "Firmware Default";
+ }
+ if (rv != FW_SUCCESS)
+ goto bye;
+
+ finiver = ntohl(caps_cmd->finiver);
+ finicsum = ntohl(caps_cmd->finicsum);
+ cfcsum = ntohl(caps_cmd->cfcsum);
+
+ /*
+ * And now tell the firmware to use the configuration we just loaded.
+ */
+ caps_cmd->op_to_write =
+ htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_WRITE_F);
+ caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
+
+ if (csio_mb_issue(hw, mbp)) {
+ rv = -EINVAL;
+ goto bye;
+ }
+
+ rv = csio_mb_fw_retval(mbp);
+ if (rv != FW_SUCCESS) {
+ csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
+ goto bye;
+ }
+
+ mempool_free(mbp, hw->mb_mempool);
+ if (finicsum != cfcsum) {
+ csio_warn(hw,
+ "Config File checksum mismatch: csum=%#x, computed=%#x\n",
+ finicsum, cfcsum);
+ }
+
+ /* Validate device capabilities */
+ rv = csio_hw_validate_caps(hw, mbp);
+ if (rv != 0)
+ goto bye;
+ /*
+ * Note that we're operating with parameters
+ * not supplied by the driver, rather than from hard-wired
+ * initialization constants buried in the driver.
+ */
+ hw->flags |= CSIO_HWF_USING_SOFT_PARAMS;
+
+ /* device parameters */
+ rv = csio_get_device_params(hw);
+ if (rv != 0)
+ goto bye;
+
+ /* Configure SGE */
+ csio_wr_sge_init(hw);
+
+ /*
+ * And finally tell the firmware to initialize itself using the
+ * parameters from the Configuration File.
+ */
+ /* Post event to notify completion of configuration */
+ csio_post_event(&hw->sm, CSIO_HWE_INIT);
+
+ csio_info(hw, "Successfully configure using Firmware "
+ "Configuration File %s, version %#x, computed checksum %#x\n",
+ config_name, finiver, cfcsum);
+ return 0;
+
+ /*
+ * Something bad happened. Return the error ...
+ */
+bye:
+ if (mbp)
+ mempool_free(mbp, hw->mb_mempool);
+ hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS;
+ csio_warn(hw, "Configuration file error %d\n", rv);
+ return rv;
+}
+
+/* Is the given firmware API compatible with the one the driver was compiled
+ * with?
+ */
+static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2)
+{
+
+ /* short circuit if it's the exact same firmware version */
+ if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver)
+ return 1;
+
+#define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x)
+ if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) &&
+ SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe))
+ return 1;
+#undef SAME_INTF
+
+ return 0;
+}
+
+/* The firmware in the filesystem is usable, but should it be installed?
+ * This routine explains itself in detail if it indicates the filesystem
+ * firmware should be installed.
+ */
+static int csio_should_install_fs_fw(struct csio_hw *hw, int card_fw_usable,
+ int k, int c)
+{
+ const char *reason;
+
+ if (!card_fw_usable) {
+ reason = "incompatible or unusable";
+ goto install;
+ }
+
+ if (k > c) {
+ reason = "older than the version supported with this driver";
+ goto install;
+ }
+
+ return 0;
+
+install:
+ csio_err(hw, "firmware on card (%u.%u.%u.%u) is %s, "
+ "installing firmware %u.%u.%u.%u on card.\n",
+ FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
+ FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason,
+ FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
+ FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
+
+ return 1;
+}
+
+static struct fw_info fw_info_array[] = {
+ {
+ .chip = CHELSIO_T5,
+ .fs_name = FW_CFG_NAME_T5,
+ .fw_mod_name = FW_FNAME_T5,
+ .fw_hdr = {
+ .chip = FW_HDR_CHIP_T5,
+ .fw_ver = __cpu_to_be32(FW_VERSION(T5)),
+ .intfver_nic = FW_INTFVER(T5, NIC),
+ .intfver_vnic = FW_INTFVER(T5, VNIC),
+ .intfver_ri = FW_INTFVER(T5, RI),
+ .intfver_iscsi = FW_INTFVER(T5, ISCSI),
+ .intfver_fcoe = FW_INTFVER(T5, FCOE),
+ },
+ }
+};
+
+static struct fw_info *find_fw_info(int chip)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) {
+ if (fw_info_array[i].chip == chip)
+ return &fw_info_array[i];
+ }
+ return NULL;
+}
+
+static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info,
+ const u8 *fw_data, unsigned int fw_size,
+ struct fw_hdr *card_fw, enum csio_dev_state state,
+ int *reset)
+{
+ int ret, card_fw_usable, fs_fw_usable;
+ const struct fw_hdr *fs_fw;
+ const struct fw_hdr *drv_fw;
+
+ drv_fw = &fw_info->fw_hdr;
+
+ /* Read the header of the firmware on the card */
+ ret = csio_hw_read_flash(hw, FLASH_FW_START,
+ sizeof(*card_fw) / sizeof(uint32_t),
+ (uint32_t *)card_fw, 1);
+ if (ret == 0) {
+ card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw);
+ } else {
+ csio_err(hw,
+ "Unable to read card's firmware header: %d\n", ret);
+ card_fw_usable = 0;
+ }
+
+ if (fw_data != NULL) {
+ fs_fw = (const void *)fw_data;
+ fs_fw_usable = fw_compatible(drv_fw, fs_fw);
+ } else {
+ fs_fw = NULL;
+ fs_fw_usable = 0;
+ }
+
+ if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver &&
+ (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) {
+ /* Common case: the firmware on the card is an exact match and
+ * the filesystem one is an exact match too, or the filesystem
+ * one is absent/incompatible.
+ */
+ } else if (fs_fw_usable && state == CSIO_DEV_STATE_UNINIT &&
+ csio_should_install_fs_fw(hw, card_fw_usable,
+ be32_to_cpu(fs_fw->fw_ver),
+ be32_to_cpu(card_fw->fw_ver))) {
+ ret = csio_hw_fw_upgrade(hw, hw->pfn, fw_data,
+ fw_size, 0);
+ if (ret != 0) {
+ csio_err(hw,
+ "failed to install firmware: %d\n", ret);
+ goto bye;
+ }
+
+ /* Installed successfully, update the cached header too. */
+ memcpy(card_fw, fs_fw, sizeof(*card_fw));
+ card_fw_usable = 1;
+ *reset = 0; /* already reset as part of load_fw */
+ }
+
+ if (!card_fw_usable) {
+ uint32_t d, c, k;
+
+ d = be32_to_cpu(drv_fw->fw_ver);
+ c = be32_to_cpu(card_fw->fw_ver);
+ k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0;
+
+ csio_err(hw, "Cannot find a usable firmware: "
+ "chip state %d, "
+ "driver compiled with %d.%d.%d.%d, "
+ "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n",
+ state,
+ FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d),
+ FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d),
+ FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
+ FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
+ FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
+ FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
+ ret = EINVAL;
+ goto bye;
+ }
+
+ /* We're using whatever's on the card and it's known to be good. */
+ hw->fwrev = be32_to_cpu(card_fw->fw_ver);
+ hw->tp_vers = be32_to_cpu(card_fw->tp_microcode_ver);
+
+bye:
+ return ret;
+}
+
+/*
+ * Returns -EINVAL if attempts to flash the firmware failed
+ * else returns 0,
+ * if flashing was not attempted because the card had the
+ * latest firmware ECANCELED is returned
+ */
+static int
+csio_hw_flash_fw(struct csio_hw *hw, int *reset)
+{
+ int ret = -ECANCELED;
+ const struct firmware *fw;
+ struct fw_info *fw_info;
+ struct fw_hdr *card_fw;
+ struct pci_dev *pci_dev = hw->pdev;
+ struct device *dev = &pci_dev->dev ;
+ const u8 *fw_data = NULL;
+ unsigned int fw_size = 0;
+
+ /* This is the firmware whose headers the driver was compiled
+ * against
+ */
+ fw_info = find_fw_info(CHELSIO_CHIP_VERSION(hw->chip_id));
+ if (fw_info == NULL) {
+ csio_err(hw,
+ "unable to get firmware info for chip %d.\n",
+ CHELSIO_CHIP_VERSION(hw->chip_id));
+ return -EINVAL;
+ }
+
+ if (request_firmware(&fw, FW_FNAME_T5, dev) < 0) {
+ csio_err(hw, "could not find firmware image %s, err: %d\n",
+ FW_FNAME_T5, ret);
+ } else {
+ fw_data = fw->data;
+ fw_size = fw->size;
+ }
+
+ /* allocate memory to read the header of the firmware on the
+ * card
+ */
+ card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL);
+
+ /* upgrade FW logic */
+ ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw,
+ hw->fw_state, reset);
+
+ /* Cleaning up */
+ if (fw != NULL)
+ release_firmware(fw);
+ kfree(card_fw);
+ return ret;
+}
+
+/*
+ * csio_hw_configure - Configure HW
+ * @hw - HW module
+ *
+ */
+static void
+csio_hw_configure(struct csio_hw *hw)
+{
+ int reset = 1;
+ int rv;
+ u32 param[1];
+
+ rv = csio_hw_dev_ready(hw);
+ if (rv != 0) {
+ CSIO_INC_STATS(hw, n_err_fatal);
+ csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+ goto out;
+ }
+
+ /* HW version */
+ hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV_A);
+
+ /* Needed for FW download */
+ rv = csio_hw_get_flash_params(hw);
+ if (rv != 0) {
+ csio_err(hw, "Failed to get serial flash params rv:%d\n", rv);
+ csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+ goto out;
+ }
+
+ /* Set PCIe completion timeout to 4 seconds */
+ if (pci_is_pcie(hw->pdev))
+ pcie_capability_clear_and_set_word(hw->pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd);
+
+ hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR);
+
+ rv = csio_hw_get_fw_version(hw, &hw->fwrev);
+ if (rv != 0)
+ goto out;
+
+ csio_hw_print_fw_version(hw, "Firmware revision");
+
+ rv = csio_do_hello(hw, &hw->fw_state);
+ if (rv != 0) {
+ CSIO_INC_STATS(hw, n_err_fatal);
+ csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+ goto out;
+ }
+
+ /* Read vpd */
+ rv = csio_hw_get_vpd_params(hw, &hw->vpd);
+ if (rv != 0)
+ goto out;
+
+ csio_hw_get_fw_version(hw, &hw->fwrev);
+ csio_hw_get_tp_version(hw, &hw->tp_vers);
+ if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+
+ /* Do firmware update */
+ spin_unlock_irq(&hw->lock);
+ rv = csio_hw_flash_fw(hw, &reset);
+ spin_lock_irq(&hw->lock);
+
+ if (rv != 0)
+ goto out;
+
+ /* If the firmware doesn't support Configuration Files,
+ * return an error.
+ */
+ rv = csio_hw_check_fwconfig(hw, param);
+ if (rv != 0) {
+ csio_info(hw, "Firmware doesn't support "
+ "Firmware Configuration files\n");
+ goto out;
+ }
+
+ /* The firmware provides us with a memory buffer where we can
+ * load a Configuration File from the host if we want to
+ * override the Configuration File in flash.
+ */
+ rv = csio_hw_use_fwconfig(hw, reset, param);
+ if (rv == -ENOENT) {
+ csio_info(hw, "Could not initialize "
+ "adapter, error%d\n", rv);
+ goto out;
+ }
+ if (rv != 0) {
+ csio_info(hw, "Could not initialize "
+ "adapter, error%d\n", rv);
+ goto out;
+ }
+
+ } else {
+ if (hw->fw_state == CSIO_DEV_STATE_INIT) {
+
+ hw->flags |= CSIO_HWF_USING_SOFT_PARAMS;
+
+ /* device parameters */
+ rv = csio_get_device_params(hw);
+ if (rv != 0)
+ goto out;
+
+ /* Get device capabilities */
+ rv = csio_config_device_caps(hw);
+ if (rv != 0)
+ goto out;
+
+ /* Configure SGE */
+ csio_wr_sge_init(hw);
+
+ /* Post event to notify completion of configuration */
+ csio_post_event(&hw->sm, CSIO_HWE_INIT);
+ goto out;
+ }
+ } /* if not master */
+
+out:
+ return;
+}
+
+/*
+ * csio_hw_initialize - Initialize HW
+ * @hw - HW module
+ *
+ */
+static void
+csio_hw_initialize(struct csio_hw *hw)
+{
+ struct csio_mb *mbp;
+ enum fw_retval retval;
+ int rv;
+ int i;
+
+ if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+ mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+ if (!mbp)
+ goto out;
+
+ csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+ if (csio_mb_issue(hw, mbp)) {
+ csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n");
+ goto free_and_out;
+ }
+
+ retval = csio_mb_fw_retval(mbp);
+ if (retval != FW_SUCCESS) {
+ csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n",
+ retval);
+ goto free_and_out;
+ }
+
+ mempool_free(mbp, hw->mb_mempool);
+ }
+
+ rv = csio_get_fcoe_resinfo(hw);
+ if (rv != 0) {
+ csio_err(hw, "Failed to read fcoe resource info: %d\n", rv);
+ goto out;
+ }
+
+ spin_unlock_irq(&hw->lock);
+ rv = csio_config_queues(hw);
+ spin_lock_irq(&hw->lock);
+
+ if (rv != 0) {
+ csio_err(hw, "Config of queues failed!: %d\n", rv);
+ goto out;
+ }
+
+ for (i = 0; i < hw->num_pports; i++)
+ hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA;
+
+ if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+ rv = csio_enable_ports(hw);
+ if (rv != 0) {
+ csio_err(hw, "Failed to enable ports: %d\n", rv);
+ goto out;
+ }
+ }
+
+ csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE);
+ return;
+
+free_and_out:
+ mempool_free(mbp, hw->mb_mempool);
+out:
+ return;
+}
+
+#define PF_INTR_MASK (PFSW_F | PFCIM_F)
+
+/*
+ * csio_hw_intr_enable - Enable HW interrupts
+ * @hw: Pointer to HW module.
+ *
+ * Enable interrupts in HW registers.
+ */
+static void
+csio_hw_intr_enable(struct csio_hw *hw)
+{
+ uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw));
+ uint32_t pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A));
+ uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE_A);
+
+ /*
+ * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up
+ * by FW, so do nothing for INTX.
+ */
+ if (hw->intr_mode == CSIO_IM_MSIX)
+ csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A),
+ AIVEC_V(AIVEC_M), vec);
+ else if (hw->intr_mode == CSIO_IM_MSI)
+ csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A),
+ AIVEC_V(AIVEC_M), 0);
+
+ csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE_A));
+
+ /* Turn on MB interrupts - this will internally flush PIO as well */
+ csio_mb_intr_enable(hw);
+
+ /* These are common registers - only a master can modify them */
+ if (csio_is_hw_master(hw)) {
+ /*
+ * Disable the Serial FLASH interrupt, if enabled!
+ */
+ pl &= (~SF_F);
+ csio_wr_reg32(hw, pl, PL_INT_ENABLE_A);
+
+ csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE_F |
+ EGRESS_SIZE_ERR_F | ERR_INVALID_CIDX_INC_F |
+ ERR_CPL_OPCODE_0_F | ERR_DROPPED_DB_F |
+ ERR_DATA_CPL_ON_HIGH_QID1_F |
+ ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F |
+ ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F |
+ ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F |
+ ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F,
+ SGE_INT_ENABLE3_A);
+ csio_set_reg_field(hw, PL_INT_MAP0_A, 0, 1 << pf);
+ }
+
+ hw->flags |= CSIO_HWF_HW_INTR_ENABLED;
+
+}
+
+/*
+ * csio_hw_intr_disable - Disable HW interrupts
+ * @hw: Pointer to HW module.
+ *
+ * Turn off Mailbox and PCI_PF_CFG interrupts.
+ */
+void
+csio_hw_intr_disable(struct csio_hw *hw)
+{
+ uint32_t pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A));
+
+ if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED))
+ return;
+
+ hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED;
+
+ csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE_A));
+ if (csio_is_hw_master(hw))
+ csio_set_reg_field(hw, PL_INT_MAP0_A, 1 << pf, 0);
+
+ /* Turn off MB interrupts */
+ csio_mb_intr_disable(hw);
+
+}
+
+void
+csio_hw_fatal_err(struct csio_hw *hw)
+{
+ csio_set_reg_field(hw, SGE_CONTROL_A, GLOBALENABLE_F, 0);
+ csio_hw_intr_disable(hw);
+
+ /* Do not reset HW, we may need FW state for debugging */
+ csio_fatal(hw, "HW Fatal error encountered!\n");
+}
+
+/*****************************************************************************/
+/* START: HW SM */
+/*****************************************************************************/
+/*
+ * csio_hws_uninit - Uninit state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_CFG:
+ csio_set_state(&hw->sm, csio_hws_configuring);
+ csio_hw_configure(hw);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_configuring - Configuring state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_INIT:
+ csio_set_state(&hw->sm, csio_hws_initializing);
+ csio_hw_initialize(hw);
+ break;
+
+ case CSIO_HWE_INIT_DONE:
+ csio_set_state(&hw->sm, csio_hws_ready);
+ /* Fan out event to all lnode SMs */
+ csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY);
+ break;
+
+ case CSIO_HWE_FATAL:
+ csio_set_state(&hw->sm, csio_hws_uninit);
+ break;
+
+ case CSIO_HWE_PCI_REMOVE:
+ csio_do_bye(hw);
+ break;
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_initializing - Initialiazing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_INIT_DONE:
+ csio_set_state(&hw->sm, csio_hws_ready);
+
+ /* Fan out event to all lnode SMs */
+ csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY);
+
+ /* Enable interrupts */
+ csio_hw_intr_enable(hw);
+ break;
+
+ case CSIO_HWE_FATAL:
+ csio_set_state(&hw->sm, csio_hws_uninit);
+ break;
+
+ case CSIO_HWE_PCI_REMOVE:
+ csio_do_bye(hw);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_ready - Ready state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ /* Remember the event */
+ hw->evtflag = evt;
+
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_HBA_RESET:
+ case CSIO_HWE_FW_DLOAD:
+ case CSIO_HWE_SUSPEND:
+ case CSIO_HWE_PCI_REMOVE:
+ case CSIO_HWE_PCIERR_DETECTED:
+ csio_set_state(&hw->sm, csio_hws_quiescing);
+ /* cleanup all outstanding cmds */
+ if (evt == CSIO_HWE_HBA_RESET ||
+ evt == CSIO_HWE_PCIERR_DETECTED)
+ csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false);
+ else
+ csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true);
+
+ csio_hw_intr_disable(hw);
+ csio_hw_mbm_cleanup(hw);
+ csio_evtq_stop(hw);
+ csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP);
+ csio_evtq_flush(hw);
+ csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw));
+ csio_post_event(&hw->sm, CSIO_HWE_QUIESCED);
+ break;
+
+ case CSIO_HWE_FATAL:
+ csio_set_state(&hw->sm, csio_hws_uninit);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_quiescing - Quiescing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_QUIESCED:
+ switch (hw->evtflag) {
+ case CSIO_HWE_FW_DLOAD:
+ csio_set_state(&hw->sm, csio_hws_resetting);
+ /* Download firmware */
+ /* Fall through */
+
+ case CSIO_HWE_HBA_RESET:
+ csio_set_state(&hw->sm, csio_hws_resetting);
+ /* Start reset of the HBA */
+ csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET);
+ csio_wr_destroy_queues(hw, false);
+ csio_do_reset(hw, false);
+ csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE);
+ break;
+
+ case CSIO_HWE_PCI_REMOVE:
+ csio_set_state(&hw->sm, csio_hws_removing);
+ csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE);
+ csio_wr_destroy_queues(hw, true);
+ /* Now send the bye command */
+ csio_do_bye(hw);
+ break;
+
+ case CSIO_HWE_SUSPEND:
+ csio_set_state(&hw->sm, csio_hws_quiesced);
+ break;
+
+ case CSIO_HWE_PCIERR_DETECTED:
+ csio_set_state(&hw->sm, csio_hws_pcierr);
+ csio_wr_destroy_queues(hw, false);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+
+ }
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_quiesced - Quiesced state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_RESUME:
+ csio_set_state(&hw->sm, csio_hws_configuring);
+ csio_hw_configure(hw);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_resetting - HW Resetting state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_HBA_RESET_DONE:
+ csio_evtq_start(hw);
+ csio_set_state(&hw->sm, csio_hws_configuring);
+ csio_hw_configure(hw);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*
+ * csio_hws_removing - PCI Hotplug removing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_HBA_RESET:
+ if (!csio_is_hw_master(hw))
+ break;
+ /*
+ * The BYE should have alerady been issued, so we cant
+ * use the mailbox interface. Hence we use the PL_RST
+ * register directly.
+ */
+ csio_err(hw, "Resetting HW and waiting 2 seconds...\n");
+ csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A);
+ mdelay(2000);
+ break;
+
+ /* Should never receive any new events */
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+
+ }
+}
+
+/*
+ * csio_hws_pcierr - PCI Error state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+ hw->prev_evt = hw->cur_evt;
+ hw->cur_evt = evt;
+ CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+ switch (evt) {
+ case CSIO_HWE_PCIERR_SLOT_RESET:
+ csio_evtq_start(hw);
+ csio_set_state(&hw->sm, csio_hws_configuring);
+ csio_hw_configure(hw);
+ break;
+
+ default:
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+}
+
+/*****************************************************************************/
+/* END: HW SM */
+/*****************************************************************************/
+
+/*
+ * csio_handle_intr_status - table driven interrupt handler
+ * @hw: HW instance
+ * @reg: the interrupt status register to process
+ * @acts: table of interrupt actions
+ *
+ * A table driven interrupt handler that applies a set of masks to an
+ * interrupt status word and performs the corresponding actions if the
+ * interrupts described by the mask have occured. The actions include
+ * optionally emitting a warning or alert message. The table is terminated
+ * by an entry specifying mask 0. Returns the number of fatal interrupt
+ * conditions.
+ */
+int
+csio_handle_intr_status(struct csio_hw *hw, unsigned int reg,
+ const struct intr_info *acts)
+{
+ int fatal = 0;
+ unsigned int mask = 0;
+ unsigned int status = csio_rd_reg32(hw, reg);
+
+ for ( ; acts->mask; ++acts) {
+ if (!(status & acts->mask))
+ continue;
+ if (acts->fatal) {
+ fatal++;
+ csio_fatal(hw, "Fatal %s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ } else if (acts->msg)
+ csio_info(hw, "%s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ mask |= acts->mask;
+ }
+ status &= mask;
+ if (status) /* clear processed interrupts */
+ csio_wr_reg32(hw, status, reg);
+ return fatal;
+}
+
+/*
+ * TP interrupt handler.
+ */
+static void csio_tp_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info tp_intr_info[] = {
+ { 0x3fffffff, "TP parity error", -1, 1 },
+ { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, TP_INT_CAUSE_A, tp_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * SGE interrupt handler.
+ */
+static void csio_sge_intr_handler(struct csio_hw *hw)
+{
+ uint64_t v;
+
+ static struct intr_info sge_intr_info[] = {
+ { ERR_CPL_EXCEED_IQE_SIZE_F,
+ "SGE received CPL exceeding IQE size", -1, 1 },
+ { ERR_INVALID_CIDX_INC_F,
+ "SGE GTS CIDX increment too large", -1, 0 },
+ { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 },
+ { ERR_DROPPED_DB_F, "SGE doorbell dropped", -1, 0 },
+ { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F,
+ "SGE IQID > 1023 received CPL for FL", -1, 0 },
+ { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1,
+ 0 },
+ { ERR_ING_CTXT_PRIO_F,
+ "SGE too many priority ingress contexts", -1, 0 },
+ { ERR_EGR_CTXT_PRIO_F,
+ "SGE too many priority egress contexts", -1, 0 },
+ { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 },
+ { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 },
+ { 0, NULL, 0, 0 }
+ };
+
+ v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1_A) |
+ ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2_A) << 32);
+ if (v) {
+ csio_fatal(hw, "SGE parity error (%#llx)\n",
+ (unsigned long long)v);
+ csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF),
+ SGE_INT_CAUSE1_A);
+ csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2_A);
+ }
+
+ v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info);
+
+ if (csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info) ||
+ v != 0)
+ csio_hw_fatal_err(hw);
+}
+
+#define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\
+ OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F)
+#define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\
+ IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F)
+
+/*
+ * CIM interrupt handler.
+ */
+static void csio_cim_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info cim_intr_info[] = {
+ { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 },
+ { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 },
+ { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 },
+ { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 },
+ { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
+ { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
+ { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info cim_upintr_info[] = {
+ { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 },
+ { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 },
+ { ILLWRINT_F, "CIM illegal write", -1, 1 },
+ { ILLRDINT_F, "CIM illegal read", -1, 1 },
+ { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 },
+ { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 },
+ { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 },
+ { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 },
+ { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 },
+ { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 },
+ { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 },
+ { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 },
+ { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 },
+ { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 },
+ { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 },
+ { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 },
+ { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 },
+ { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 },
+ { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 },
+ { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 },
+ { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 },
+ { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 },
+ { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 },
+ { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 },
+ { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 },
+ { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 },
+ { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 },
+ { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ int fat;
+
+ fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE_A,
+ cim_intr_info) +
+ csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE_A,
+ cim_upintr_info);
+ if (fat)
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * ULP RX interrupt handler.
+ */
+static void csio_ulprx_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info ulprx_intr_info[] = {
+ { 0x1800000, "ULPRX context error", -1, 1 },
+ { 0x7fffff, "ULPRX parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE_A, ulprx_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * ULP TX interrupt handler.
+ */
+static void csio_ulptx_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info ulptx_intr_info[] = {
+ { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1,
+ 0 },
+ { 0xfffffff, "ULPTX parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE_A, ulptx_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * PM TX interrupt handler.
+ */
+static void csio_pmtx_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info pmtx_intr_info[] = {
+ { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 },
+ { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 },
+ { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 },
+ { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 },
+ { 0xffffff0, "PMTX framing error", -1, 1 },
+ { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 },
+ { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", -1,
+ 1 },
+ { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 },
+ { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1},
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE_A, pmtx_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * PM RX interrupt handler.
+ */
+static void csio_pmrx_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info pmrx_intr_info[] = {
+ { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 },
+ { 0x3ffff0, "PMRX framing error", -1, 1 },
+ { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 },
+ { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", -1,
+ 1 },
+ { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 },
+ { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1},
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE_A, pmrx_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * CPL switch interrupt handler.
+ */
+static void csio_cplsw_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info cplsw_intr_info[] = {
+ { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 },
+ { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 },
+ { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 },
+ { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 },
+ { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 },
+ { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, CPL_INTR_CAUSE_A, cplsw_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * LE interrupt handler.
+ */
+static void csio_le_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info le_intr_info[] = {
+ { LIPMISS_F, "LE LIP miss", -1, 0 },
+ { LIP0_F, "LE 0 LIP error", -1, 0 },
+ { PARITYERR_F, "LE parity error", -1, 1 },
+ { UNKNOWNCMD_F, "LE unknown command", -1, 1 },
+ { REQQPARERR_F, "LE request queue parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE_A, le_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * MPS interrupt handler.
+ */
+static void csio_mps_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info mps_rx_intr_info[] = {
+ { 0xffffff, "MPS Rx parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_tx_intr_info[] = {
+ { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
+ { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
+ { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
+ -1, 1 },
+ { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
+ -1, 1 },
+ { BUBBLE_F, "MPS Tx underflow", -1, 1 },
+ { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
+ { FRMERR_F, "MPS Tx framing error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_trc_intr_info[] = {
+ { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 },
+ { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error",
+ -1, 1 },
+ { MISCPERR_F, "MPS TRC misc parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_stat_sram_intr_info[] = {
+ { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_stat_tx_intr_info[] = {
+ { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_stat_rx_intr_info[] = {
+ { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+ static struct intr_info mps_cls_intr_info[] = {
+ { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 },
+ { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 },
+ { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ int fat;
+
+ fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE_A,
+ mps_rx_intr_info) +
+ csio_handle_intr_status(hw, MPS_TX_INT_CAUSE_A,
+ mps_tx_intr_info) +
+ csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE_A,
+ mps_trc_intr_info) +
+ csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM_A,
+ mps_stat_sram_intr_info) +
+ csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A,
+ mps_stat_tx_intr_info) +
+ csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A,
+ mps_stat_rx_intr_info) +
+ csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE_A,
+ mps_cls_intr_info);
+
+ csio_wr_reg32(hw, 0, MPS_INT_CAUSE_A);
+ csio_rd_reg32(hw, MPS_INT_CAUSE_A); /* flush */
+ if (fat)
+ csio_hw_fatal_err(hw);
+}
+
+#define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \
+ ECC_UE_INT_CAUSE_F)
+
+/*
+ * EDC/MC interrupt handler.
+ */
+static void csio_mem_intr_handler(struct csio_hw *hw, int idx)
+{
+ static const char name[3][5] = { "EDC0", "EDC1", "MC" };
+
+ unsigned int addr, cnt_addr, v;
+
+ if (idx <= MEM_EDC1) {
+ addr = EDC_REG(EDC_INT_CAUSE_A, idx);
+ cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx);
+ } else {
+ addr = MC_INT_CAUSE_A;
+ cnt_addr = MC_ECC_STATUS_A;
+ }
+
+ v = csio_rd_reg32(hw, addr) & MEM_INT_MASK;
+ if (v & PERR_INT_CAUSE_F)
+ csio_fatal(hw, "%s FIFO parity error\n", name[idx]);
+ if (v & ECC_CE_INT_CAUSE_F) {
+ uint32_t cnt = ECC_CECNT_G(csio_rd_reg32(hw, cnt_addr));
+
+ csio_wr_reg32(hw, ECC_CECNT_V(ECC_CECNT_M), cnt_addr);
+ csio_warn(hw, "%u %s correctable ECC data error%s\n",
+ cnt, name[idx], cnt > 1 ? "s" : "");
+ }
+ if (v & ECC_UE_INT_CAUSE_F)
+ csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]);
+
+ csio_wr_reg32(hw, v, addr);
+ if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * MA interrupt handler.
+ */
+static void csio_ma_intr_handler(struct csio_hw *hw)
+{
+ uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE_A);
+
+ if (status & MEM_PERR_INT_CAUSE_F)
+ csio_fatal(hw, "MA parity error, parity status %#x\n",
+ csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS_A));
+ if (status & MEM_WRAP_INT_CAUSE_F) {
+ v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS_A);
+ csio_fatal(hw,
+ "MA address wrap-around error by client %u to address %#x\n",
+ MEM_WRAP_CLIENT_NUM_G(v), MEM_WRAP_ADDRESS_G(v) << 4);
+ }
+ csio_wr_reg32(hw, status, MA_INT_CAUSE_A);
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * SMB interrupt handler.
+ */
+static void csio_smb_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info smb_intr_info[] = {
+ { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 },
+ { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 },
+ { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, SMB_INT_CAUSE_A, smb_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * NC-SI interrupt handler.
+ */
+static void csio_ncsi_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info ncsi_intr_info[] = {
+ { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 },
+ { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 },
+ { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 },
+ { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, NCSI_INT_CAUSE_A, ncsi_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * XGMAC interrupt handler.
+ */
+static void csio_xgmac_intr_handler(struct csio_hw *hw, int port)
+{
+ uint32_t v = csio_rd_reg32(hw, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A));
+
+ v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F;
+ if (!v)
+ return;
+
+ if (v & TXFIFO_PRTY_ERR_F)
+ csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port);
+ if (v & RXFIFO_PRTY_ERR_F)
+ csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port);
+ csio_wr_reg32(hw, v, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A));
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * PL interrupt handler.
+ */
+static void csio_pl_intr_handler(struct csio_hw *hw)
+{
+ static struct intr_info pl_intr_info[] = {
+ { FATALPERR_F, "T4 fatal parity error", -1, 1 },
+ { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 },
+ { 0, NULL, 0, 0 }
+ };
+
+ if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE_A, pl_intr_info))
+ csio_hw_fatal_err(hw);
+}
+
+/*
+ * csio_hw_slow_intr_handler - control path interrupt handler
+ * @hw: HW module
+ *
+ * Interrupt handler for non-data global interrupt events, e.g., errors.
+ * The designation 'slow' is because it involves register reads, while
+ * data interrupts typically don't involve any MMIOs.
+ */
+int
+csio_hw_slow_intr_handler(struct csio_hw *hw)
+{
+ uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE_A);
+
+ if (!(cause & CSIO_GLBL_INTR_MASK)) {
+ CSIO_INC_STATS(hw, n_plint_unexp);
+ return 0;
+ }
+
+ csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause);
+
+ CSIO_INC_STATS(hw, n_plint_cnt);
+
+ if (cause & CIM_F)
+ csio_cim_intr_handler(hw);
+
+ if (cause & MPS_F)
+ csio_mps_intr_handler(hw);
+
+ if (cause & NCSI_F)
+ csio_ncsi_intr_handler(hw);
+
+ if (cause & PL_F)
+ csio_pl_intr_handler(hw);
+
+ if (cause & SMB_F)
+ csio_smb_intr_handler(hw);
+
+ if (cause & XGMAC0_F)
+ csio_xgmac_intr_handler(hw, 0);
+
+ if (cause & XGMAC1_F)
+ csio_xgmac_intr_handler(hw, 1);
+
+ if (cause & XGMAC_KR0_F)
+ csio_xgmac_intr_handler(hw, 2);
+
+ if (cause & XGMAC_KR1_F)
+ csio_xgmac_intr_handler(hw, 3);
+
+ if (cause & PCIE_F)
+ hw->chip_ops->chip_pcie_intr_handler(hw);
+
+ if (cause & MC_F)
+ csio_mem_intr_handler(hw, MEM_MC);
+
+ if (cause & EDC0_F)
+ csio_mem_intr_handler(hw, MEM_EDC0);
+
+ if (cause & EDC1_F)
+ csio_mem_intr_handler(hw, MEM_EDC1);
+
+ if (cause & LE_F)
+ csio_le_intr_handler(hw);
+
+ if (cause & TP_F)
+ csio_tp_intr_handler(hw);
+
+ if (cause & MA_F)
+ csio_ma_intr_handler(hw);
+
+ if (cause & PM_TX_F)
+ csio_pmtx_intr_handler(hw);
+
+ if (cause & PM_RX_F)
+ csio_pmrx_intr_handler(hw);
+
+ if (cause & ULP_RX_F)
+ csio_ulprx_intr_handler(hw);
+
+ if (cause & CPL_SWITCH_F)
+ csio_cplsw_intr_handler(hw);
+
+ if (cause & SGE_F)
+ csio_sge_intr_handler(hw);
+
+ if (cause & ULP_TX_F)
+ csio_ulptx_intr_handler(hw);
+
+ /* Clear the interrupts just processed for which we are the master. */
+ csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE_A);
+ csio_rd_reg32(hw, PL_INT_CAUSE_A); /* flush */
+
+ return 1;
+}
+
+/*****************************************************************************
+ * HW <--> mailbox interfacing routines.
+ ****************************************************************************/
+/*
+ * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions
+ *
+ * @data: Private data pointer.
+ *
+ * Called from worker thread context.
+ */
+static void
+csio_mberr_worker(void *data)
+{
+ struct csio_hw *hw = (struct csio_hw *)data;
+ struct csio_mbm *mbm = &hw->mbm;
+ LIST_HEAD(cbfn_q);
+ struct csio_mb *mbp_next;
+ int rv;
+
+ del_timer_sync(&mbm->timer);
+
+ spin_lock_irq(&hw->lock);
+ if (list_empty(&mbm->cbfn_q)) {
+ spin_unlock_irq(&hw->lock);
+ return;
+ }
+
+ list_splice_tail_init(&mbm->cbfn_q, &cbfn_q);
+ mbm->stats.n_cbfnq = 0;
+
+ /* Try to start waiting mailboxes */
+ if (!list_empty(&mbm->req_q)) {
+ mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list);
+ list_del_init(&mbp_next->list);
+
+ rv = csio_mb_issue(hw, mbp_next);
+ if (rv != 0)
+ list_add_tail(&mbp_next->list, &mbm->req_q);
+ else
+ CSIO_DEC_STATS(mbm, n_activeq);
+ }
+ spin_unlock_irq(&hw->lock);
+
+ /* Now callback completions */
+ csio_mb_completions(hw, &cbfn_q);
+}
+
+/*
+ * csio_hw_mb_timer - Top-level Mailbox timeout handler.
+ *
+ * @data: private data pointer
+ *
+ **/
+static void
+csio_hw_mb_timer(uintptr_t data)
+{
+ struct csio_hw *hw = (struct csio_hw *)data;
+ struct csio_mb *mbp = NULL;
+
+ spin_lock_irq(&hw->lock);
+ mbp = csio_mb_tmo_handler(hw);
+ spin_unlock_irq(&hw->lock);
+
+ /* Call back the function for the timed-out Mailbox */
+ if (mbp)
+ mbp->mb_cbfn(hw, mbp);
+
+}
+
+/*
+ * csio_hw_mbm_cleanup - Cleanup Mailbox module.
+ * @hw: HW module
+ *
+ * Called with lock held, should exit with lock held.
+ * Cancels outstanding mailboxes (waiting, in-flight) and gathers them
+ * into a local queue. Drops lock and calls the completions. Holds
+ * lock and returns.
+ */
+static void
+csio_hw_mbm_cleanup(struct csio_hw *hw)
+{
+ LIST_HEAD(cbfn_q);
+
+ csio_mb_cancel_all(hw, &cbfn_q);
+
+ spin_unlock_irq(&hw->lock);
+ csio_mb_completions(hw, &cbfn_q);
+ spin_lock_irq(&hw->lock);
+}
+
+/*****************************************************************************
+ * Event handling
+ ****************************************************************************/
+int
+csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg,
+ uint16_t len)
+{
+ struct csio_evt_msg *evt_entry = NULL;
+
+ if (type >= CSIO_EVT_MAX)
+ return -EINVAL;
+
+ if (len > CSIO_EVT_MSG_SIZE)
+ return -EINVAL;
+
+ if (hw->flags & CSIO_HWF_FWEVT_STOP)
+ return -EINVAL;
+
+ if (list_empty(&hw->evt_free_q)) {
+ csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n",
+ type, len);
+ return -ENOMEM;
+ }
+
+ evt_entry = list_first_entry(&hw->evt_free_q,
+ struct csio_evt_msg, list);
+ list_del_init(&evt_entry->list);
+
+ /* copy event msg and queue the event */
+ evt_entry->type = type;
+ memcpy((void *)evt_entry->data, evt_msg, len);
+ list_add_tail(&evt_entry->list, &hw->evt_active_q);
+
+ CSIO_DEC_STATS(hw, n_evt_freeq);
+ CSIO_INC_STATS(hw, n_evt_activeq);
+
+ return 0;
+}
+
+static int
+csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg,
+ uint16_t len, bool msg_sg)
+{
+ struct csio_evt_msg *evt_entry = NULL;
+ struct csio_fl_dma_buf *fl_sg;
+ uint32_t off = 0;
+ unsigned long flags;
+ int n, ret = 0;
+
+ if (type >= CSIO_EVT_MAX)
+ return -EINVAL;
+
+ if (len > CSIO_EVT_MSG_SIZE)
+ return -EINVAL;
+
+ spin_lock_irqsave(&hw->lock, flags);
+ if (hw->flags & CSIO_HWF_FWEVT_STOP) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (list_empty(&hw->evt_free_q)) {
+ csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n",
+ type, len);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ evt_entry = list_first_entry(&hw->evt_free_q,
+ struct csio_evt_msg, list);
+ list_del_init(&evt_entry->list);
+
+ /* copy event msg and queue the event */
+ evt_entry->type = type;
+
+ /* If Payload in SG list*/
+ if (msg_sg) {
+ fl_sg = (struct csio_fl_dma_buf *) evt_msg;
+ for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) {
+ memcpy((void *)((uintptr_t)evt_entry->data + off),
+ fl_sg->flbufs[n].vaddr,
+ fl_sg->flbufs[n].len);
+ off += fl_sg->flbufs[n].len;
+ }
+ } else
+ memcpy((void *)evt_entry->data, evt_msg, len);
+
+ list_add_tail(&evt_entry->list, &hw->evt_active_q);
+ CSIO_DEC_STATS(hw, n_evt_freeq);
+ CSIO_INC_STATS(hw, n_evt_activeq);
+out:
+ spin_unlock_irqrestore(&hw->lock, flags);
+ return ret;
+}
+
+static void
+csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry)
+{
+ if (evt_entry) {
+ spin_lock_irq(&hw->lock);
+ list_del_init(&evt_entry->list);
+ list_add_tail(&evt_entry->list, &hw->evt_free_q);
+ CSIO_DEC_STATS(hw, n_evt_activeq);
+ CSIO_INC_STATS(hw, n_evt_freeq);
+ spin_unlock_irq(&hw->lock);
+ }
+}
+
+void
+csio_evtq_flush(struct csio_hw *hw)
+{
+ uint32_t count;
+ count = 30;
+ while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) {
+ spin_unlock_irq(&hw->lock);
+ msleep(2000);
+ spin_lock_irq(&hw->lock);
+ }
+
+ CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING));
+}
+
+static void
+csio_evtq_stop(struct csio_hw *hw)
+{
+ hw->flags |= CSIO_HWF_FWEVT_STOP;
+}
+
+static void
+csio_evtq_start(struct csio_hw *hw)
+{
+ hw->flags &= ~CSIO_HWF_FWEVT_STOP;
+}
+
+static void
+csio_evtq_cleanup(struct csio_hw *hw)
+{
+ struct list_head *evt_entry, *next_entry;
+
+ /* Release outstanding events from activeq to freeq*/
+ if (!list_empty(&hw->evt_active_q))
+ list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q);
+
+ hw->stats.n_evt_activeq = 0;
+ hw->flags &= ~CSIO_HWF_FWEVT_PENDING;
+
+ /* Freeup event entry */
+ list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) {
+ kfree(evt_entry);
+ CSIO_DEC_STATS(hw, n_evt_freeq);
+ }
+
+ hw->stats.n_evt_freeq = 0;
+}
+
+
+static void
+csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len,
+ struct csio_fl_dma_buf *flb, void *priv)
+{
+ __u8 op;
+ void *msg = NULL;
+ uint32_t msg_len = 0;
+ bool msg_sg = 0;
+
+ op = ((struct rss_header *) wr)->opcode;
+ if (op == CPL_FW6_PLD) {
+ CSIO_INC_STATS(hw, n_cpl_fw6_pld);
+ if (!flb || !flb->totlen) {
+ CSIO_INC_STATS(hw, n_cpl_unexp);
+ return;
+ }
+
+ msg = (void *) flb;
+ msg_len = flb->totlen;
+ msg_sg = 1;
+ } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) {
+
+ CSIO_INC_STATS(hw, n_cpl_fw6_msg);
+ /* skip RSS header */
+ msg = (void *)((uintptr_t)wr + sizeof(__be64));
+ msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) :
+ sizeof(struct cpl_fw4_msg);
+ } else {
+ csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op);
+ CSIO_INC_STATS(hw, n_cpl_unexp);
+ return;
+ }
+
+ /*
+ * Enqueue event to EventQ. Events processing happens
+ * in Event worker thread context
+ */
+ if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg,
+ (uint16_t)msg_len, msg_sg))
+ CSIO_INC_STATS(hw, n_evt_drop);
+}
+
+void
+csio_evtq_worker(struct work_struct *work)
+{
+ struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work);
+ struct list_head *evt_entry, *next_entry;
+ LIST_HEAD(evt_q);
+ struct csio_evt_msg *evt_msg;
+ struct cpl_fw6_msg *msg;
+ struct csio_rnode *rn;
+ int rv = 0;
+ uint8_t evtq_stop = 0;
+
+ csio_dbg(hw, "event worker thread active evts#%d\n",
+ hw->stats.n_evt_activeq);
+
+ spin_lock_irq(&hw->lock);
+ while (!list_empty(&hw->evt_active_q)) {
+ list_splice_tail_init(&hw->evt_active_q, &evt_q);
+ spin_unlock_irq(&hw->lock);
+
+ list_for_each_safe(evt_entry, next_entry, &evt_q) {
+ evt_msg = (struct csio_evt_msg *) evt_entry;
+
+ /* Drop events if queue is STOPPED */
+ spin_lock_irq(&hw->lock);
+ if (hw->flags & CSIO_HWF_FWEVT_STOP)
+ evtq_stop = 1;
+ spin_unlock_irq(&hw->lock);
+ if (evtq_stop) {
+ CSIO_INC_STATS(hw, n_evt_drop);
+ goto free_evt;
+ }
+
+ switch (evt_msg->type) {
+ case CSIO_EVT_FW:
+ msg = (struct cpl_fw6_msg *)(evt_msg->data);
+
+ if ((msg->opcode == CPL_FW6_MSG ||
+ msg->opcode == CPL_FW4_MSG) &&
+ !msg->type) {
+ rv = csio_mb_fwevt_handler(hw,
+ msg->data);
+ if (!rv)
+ break;
+ /* Handle any remaining fw events */
+ csio_fcoe_fwevt_handler(hw,
+ msg->opcode, msg->data);
+ } else if (msg->opcode == CPL_FW6_PLD) {
+
+ csio_fcoe_fwevt_handler(hw,
+ msg->opcode, msg->data);
+ } else {
+ csio_warn(hw,
+ "Unhandled FW msg op %x type %x\n",
+ msg->opcode, msg->type);
+ CSIO_INC_STATS(hw, n_evt_drop);
+ }
+ break;
+
+ case CSIO_EVT_MBX:
+ csio_mberr_worker(hw);
+ break;
+
+ case CSIO_EVT_DEV_LOSS:
+ memcpy(&rn, evt_msg->data, sizeof(rn));
+ csio_rnode_devloss_handler(rn);
+ break;
+
+ default:
+ csio_warn(hw, "Unhandled event %x on evtq\n",
+ evt_msg->type);
+ CSIO_INC_STATS(hw, n_evt_unexp);
+ break;
+ }
+free_evt:
+ csio_free_evt(hw, evt_msg);
+ }
+
+ spin_lock_irq(&hw->lock);
+ }
+ hw->flags &= ~CSIO_HWF_FWEVT_PENDING;
+ spin_unlock_irq(&hw->lock);
+}
+
+int
+csio_fwevtq_handler(struct csio_hw *hw)
+{
+ int rv;
+
+ if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) {
+ CSIO_INC_STATS(hw, n_int_stray);
+ return -EINVAL;
+ }
+
+ rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx,
+ csio_process_fwevtq_entry, NULL);
+ return rv;
+}
+
+/****************************************************************************
+ * Entry points
+ ****************************************************************************/
+
+/* Management module */
+/*
+ * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q.
+ * mgmt - mgmt module
+ * @io_req - io request
+ *
+ * Return - 0:if given IO Req exists in active Q.
+ * -EINVAL :if lookup fails.
+ */
+int
+csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req)
+{
+ struct list_head *tmp;
+
+ /* Lookup ioreq in the ACTIVEQ */
+ list_for_each(tmp, &mgmtm->active_q) {
+ if (io_req == (struct csio_ioreq *)tmp)
+ return 0;
+ }
+ return -EINVAL;
+}
+
+#define ECM_MIN_TMO 1000 /* Minimum timeout value for req */
+
+/*
+ * csio_mgmts_tmo_handler - MGMT IO Timeout handler.
+ * @data - Event data.
+ *
+ * Return - none.
+ */
+static void
+csio_mgmt_tmo_handler(uintptr_t data)
+{
+ struct csio_mgmtm *mgmtm = (struct csio_mgmtm *) data;
+ struct list_head *tmp;
+ struct csio_ioreq *io_req;
+
+ csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n");
+
+ spin_lock_irq(&mgmtm->hw->lock);
+
+ list_for_each(tmp, &mgmtm->active_q) {
+ io_req = (struct csio_ioreq *) tmp;
+ io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO);
+
+ if (!io_req->tmo) {
+ /* Dequeue the request from retry Q. */
+ tmp = csio_list_prev(tmp);
+ list_del_init(&io_req->sm.sm_list);
+ if (io_req->io_cbfn) {
+ /* io_req will be freed by completion handler */
+ io_req->wr_status = -ETIMEDOUT;
+ io_req->io_cbfn(mgmtm->hw, io_req);
+ } else {
+ CSIO_DB_ASSERT(0);
+ }
+ }
+ }
+
+ /* If retry queue is not empty, re-arm timer */
+ if (!list_empty(&mgmtm->active_q))
+ mod_timer(&mgmtm->mgmt_timer,
+ jiffies + msecs_to_jiffies(ECM_MIN_TMO));
+ spin_unlock_irq(&mgmtm->hw->lock);
+}
+
+static void
+csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm)
+{
+ struct csio_hw *hw = mgmtm->hw;
+ struct csio_ioreq *io_req;
+ struct list_head *tmp;
+ uint32_t count;
+
+ count = 30;
+ /* Wait for all outstanding req to complete gracefully */
+ while ((!list_empty(&mgmtm->active_q)) && count--) {
+ spin_unlock_irq(&hw->lock);
+ msleep(2000);
+ spin_lock_irq(&hw->lock);
+ }
+
+ /* release outstanding req from ACTIVEQ */
+ list_for_each(tmp, &mgmtm->active_q) {
+ io_req = (struct csio_ioreq *) tmp;
+ tmp = csio_list_prev(tmp);
+ list_del_init(&io_req->sm.sm_list);
+ mgmtm->stats.n_active--;
+ if (io_req->io_cbfn) {
+ /* io_req will be freed by completion handler */
+ io_req->wr_status = -ETIMEDOUT;
+ io_req->io_cbfn(mgmtm->hw, io_req);
+ }
+ }
+}
+
+/*
+ * csio_mgmt_init - Mgmt module init entry point
+ * @mgmtsm - mgmt module
+ * @hw - HW module
+ *
+ * Initialize mgmt timer, resource wait queue, active queue,
+ * completion q. Allocate Egress and Ingress
+ * WR queues and save off the queue index returned by the WR
+ * module for future use. Allocate and save off mgmt reqs in the
+ * mgmt_req_freelist for future use. Make sure their SM is initialized
+ * to uninit state.
+ * Returns: 0 - on success
+ * -ENOMEM - on error.
+ */
+static int
+csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw)
+{
+ struct timer_list *timer = &mgmtm->mgmt_timer;
+
+ init_timer(timer);
+ timer->function = csio_mgmt_tmo_handler;
+ timer->data = (unsigned long)mgmtm;
+
+ INIT_LIST_HEAD(&mgmtm->active_q);
+ INIT_LIST_HEAD(&mgmtm->cbfn_q);
+
+ mgmtm->hw = hw;
+ /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/
+
+ return 0;
+}
+
+/*
+ * csio_mgmtm_exit - MGMT module exit entry point
+ * @mgmtsm - mgmt module
+ *
+ * This function called during MGMT module uninit.
+ * Stop timers, free ioreqs allocated.
+ * Returns: None
+ *
+ */
+static void
+csio_mgmtm_exit(struct csio_mgmtm *mgmtm)
+{
+ del_timer_sync(&mgmtm->mgmt_timer);
+}
+
+
+/**
+ * csio_hw_start - Kicks off the HW State machine
+ * @hw: Pointer to HW module.
+ *
+ * It is assumed that the initialization is a synchronous operation.
+ * So when we return afer posting the event, the HW SM should be in
+ * the ready state, if there were no errors during init.
+ */
+int
+csio_hw_start(struct csio_hw *hw)
+{
+ spin_lock_irq(&hw->lock);
+ csio_post_event(&hw->sm, CSIO_HWE_CFG);
+ spin_unlock_irq(&hw->lock);
+
+ if (csio_is_hw_ready(hw))
+ return 0;
+ else
+ return -EINVAL;
+}
+
+int
+csio_hw_stop(struct csio_hw *hw)
+{
+ csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE);
+
+ if (csio_is_hw_removing(hw))
+ return 0;
+ else
+ return -EINVAL;
+}
+
+/* Max reset retries */
+#define CSIO_MAX_RESET_RETRIES 3
+
+/**
+ * csio_hw_reset - Reset the hardware
+ * @hw: HW module.
+ *
+ * Caller should hold lock across this function.
+ */
+int
+csio_hw_reset(struct csio_hw *hw)
+{
+ if (!csio_is_hw_master(hw))
+ return -EPERM;
+
+ if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) {
+ csio_dbg(hw, "Max hw reset attempts reached..");
+ return -EINVAL;
+ }
+
+ hw->rst_retries++;
+ csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET);
+
+ if (csio_is_hw_ready(hw)) {
+ hw->rst_retries = 0;
+ hw->stats.n_reset_start = jiffies_to_msecs(jiffies);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+/*
+ * csio_hw_get_device_id - Caches the Adapter's vendor & device id.
+ * @hw: HW module.
+ */
+static void
+csio_hw_get_device_id(struct csio_hw *hw)
+{
+ /* Is the adapter device id cached already ?*/
+ if (csio_is_dev_id_cached(hw))
+ return;
+
+ /* Get the PCI vendor & device id */
+ pci_read_config_word(hw->pdev, PCI_VENDOR_ID,
+ &hw->params.pci.vendor_id);
+ pci_read_config_word(hw->pdev, PCI_DEVICE_ID,
+ &hw->params.pci.device_id);
+
+ csio_dev_id_cached(hw);
+ hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK);
+
+} /* csio_hw_get_device_id */
+
+/*
+ * csio_hw_set_description - Set the model, description of the hw.
+ * @hw: HW module.
+ * @ven_id: PCI Vendor ID
+ * @dev_id: PCI Device ID
+ */
+static void
+csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id)
+{
+ uint32_t adap_type, prot_type;
+
+ if (ven_id == CSIO_VENDOR_ID) {
+ prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK);
+ adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK);
+
+ if (prot_type == CSIO_T5_FCOE_ASIC) {
+ memcpy(hw->hw_ver,
+ csio_t5_fcoe_adapters[adap_type].model_no, 16);
+ memcpy(hw->model_desc,
+ csio_t5_fcoe_adapters[adap_type].description,
+ 32);
+ } else {
+ char tempName[32] = "Chelsio FCoE Controller";
+ memcpy(hw->model_desc, tempName, 32);
+ }
+ }
+} /* csio_hw_set_description */
+
+/**
+ * csio_hw_init - Initialize HW module.
+ * @hw: Pointer to HW module.
+ *
+ * Initialize the members of the HW module.
+ */
+int
+csio_hw_init(struct csio_hw *hw)
+{
+ int rv = -EINVAL;
+ uint32_t i;
+ uint16_t ven_id, dev_id;
+ struct csio_evt_msg *evt_entry;
+
+ INIT_LIST_HEAD(&hw->sm.sm_list);
+ csio_init_state(&hw->sm, csio_hws_uninit);
+ spin_lock_init(&hw->lock);
+ INIT_LIST_HEAD(&hw->sln_head);
+
+ /* Get the PCI vendor & device id */
+ csio_hw_get_device_id(hw);
+
+ strcpy(hw->name, CSIO_HW_NAME);
+
+ /* Initialize the HW chip ops T5 specific ops */
+ hw->chip_ops = &t5_ops;
+
+ /* Set the model & its description */
+
+ ven_id = hw->params.pci.vendor_id;
+ dev_id = hw->params.pci.device_id;
+
+ csio_hw_set_description(hw, ven_id, dev_id);
+
+ /* Initialize default log level */
+ hw->params.log_level = (uint32_t) csio_dbg_level;
+
+ csio_set_fwevt_intr_idx(hw, -1);
+ csio_set_nondata_intr_idx(hw, -1);
+
+ /* Init all the modules: Mailbox, WorkRequest and Transport */
+ if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer))
+ goto err;
+
+ rv = csio_wrm_init(csio_hw_to_wrm(hw), hw);
+ if (rv)
+ goto err_mbm_exit;
+
+ rv = csio_scsim_init(csio_hw_to_scsim(hw), hw);
+ if (rv)
+ goto err_wrm_exit;
+
+ rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw);
+ if (rv)
+ goto err_scsim_exit;
+ /* Pre-allocate evtq and initialize them */
+ INIT_LIST_HEAD(&hw->evt_active_q);
+ INIT_LIST_HEAD(&hw->evt_free_q);
+ for (i = 0; i < csio_evtq_sz; i++) {
+
+ evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL);
+ if (!evt_entry) {
+ csio_err(hw, "Failed to initialize eventq");
+ goto err_evtq_cleanup;
+ }
+
+ list_add_tail(&evt_entry->list, &hw->evt_free_q);
+ CSIO_INC_STATS(hw, n_evt_freeq);
+ }
+
+ hw->dev_num = dev_num;
+ dev_num++;
+
+ return 0;
+
+err_evtq_cleanup:
+ csio_evtq_cleanup(hw);
+ csio_mgmtm_exit(csio_hw_to_mgmtm(hw));
+err_scsim_exit:
+ csio_scsim_exit(csio_hw_to_scsim(hw));
+err_wrm_exit:
+ csio_wrm_exit(csio_hw_to_wrm(hw), hw);
+err_mbm_exit:
+ csio_mbm_exit(csio_hw_to_mbm(hw));
+err:
+ return rv;
+}
+
+/**
+ * csio_hw_exit - Un-initialize HW module.
+ * @hw: Pointer to HW module.
+ *
+ */
+void
+csio_hw_exit(struct csio_hw *hw)
+{
+ csio_evtq_cleanup(hw);
+ csio_mgmtm_exit(csio_hw_to_mgmtm(hw));
+ csio_scsim_exit(csio_hw_to_scsim(hw));
+ csio_wrm_exit(csio_hw_to_wrm(hw), hw);
+ csio_mbm_exit(csio_hw_to_mbm(hw));
+}
Code Review / kvmfornfv.git / blobdiff