Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / scsi / arm / Kconfig

diff --git a/kernel/drivers/scsi/arm/Kconfig b/kernel/drivers/scsi/arm/Kconfig
new file mode 100644 (file)
index 0000000..cfd172a
--- /dev/null
+++ b/kernel/drivers/scsi/arm/Kconfig
@@ -0,0 +1,84 @@
+#
+# SCSI driver configuration for Acorn
+#
+config SCSI_ACORNSCSI_3
+       tristate "Acorn SCSI card (aka30) support"
+       depends on ARCH_ACORN && SCSI
+       select SCSI_SPI_ATTRS
+       help
+         This enables support for the Acorn SCSI card (aka30). If you have an
+         Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_ACORNSCSI_TAGGED_QUEUE
+       bool "Support SCSI 2 Tagged queueing"
+       depends on SCSI_ACORNSCSI_3
+       help
+         Say Y here to enable tagged queuing support on the Acorn SCSI card.
+
+         This is a feature of SCSI-2 which improves performance: the host
+         adapter can send several SCSI commands to a device's queue even if
+         previous commands haven't finished yet. Some SCSI devices don't
+         implement this properly, so the safe answer is N.
+
+config SCSI_ACORNSCSI_SYNC
+       bool "Support SCSI 2 Synchronous Transfers"
+       depends on SCSI_ACORNSCSI_3
+       help
+         Say Y here to enable synchronous transfer negotiation with all
+         targets on the Acorn SCSI card.
+
+         In general, this improves performance; however some SCSI devices
+         don't implement it properly, so the safe answer is N.
+
+config SCSI_ARXESCSI
+       tristate "ARXE SCSI support"
+       depends on ARCH_ACORN && SCSI
+       help
+         Around 1991, Arxe Systems Limited released a high density floppy
+         disc interface for the Acorn Archimedes range, to allow the use of
+         HD discs from the then new A5000 on earlier models. This interface
+         was either sold on its own or with an integral SCSI controller.
+         Technical details on this NCR53c94-based device are available at
+         <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
+         Say Y here to compile in support for the SCSI controller.
+
+config SCSI_CUMANA_2
+       tristate "CumanaSCSI II support"
+       depends on ARCH_ACORN && SCSI
+       help
+         This enables support for the Cumana SCSI II card. If you have an
+         Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_EESOXSCSI
+       tristate "EESOX support"
+       depends on ARCH_ACORN && SCSI
+       help
+         This enables support for the EESOX SCSI card. If you have an Acorn
+         system with one of these, say Y, otherwise say N.
+
+config SCSI_POWERTECSCSI
+       tristate "PowerTec support"
+       depends on ARCH_ACORN && SCSI
+       help
+         This enables support for the Powertec SCSI card on Acorn systems. If
+         you have one of these, say Y. If unsure, say N.
+
+comment "The following drivers are not fully supported"
+       depends on ARCH_ACORN
+
+config SCSI_CUMANA_1
+       tristate "CumanaSCSI I support"
+       depends on ARCH_ACORN && SCSI
+       select SCSI_SPI_ATTRS
+       help
+         This enables support for the Cumana SCSI I card. If you have an
+         Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_OAK1
+       tristate "Oak SCSI support"
+       depends on ARCH_ACORN && SCSI
+       select SCSI_SPI_ATTRS
+       help
+         This enables support for the Oak SCSI card. If you have an Acorn
+         system with one of these, say Y. If unsure, say N.
+