Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / s390 / net / Kconfig

diff --git a/kernel/drivers/s390/net/Kconfig b/kernel/drivers/s390/net/Kconfig
new file mode 100644 (file)
index 0000000..b2837b1
--- /dev/null
+++ b/kernel/drivers/s390/net/Kconfig
@@ -0,0 +1,100 @@
+menu "S/390 network device drivers"
+       depends on NETDEVICES && S390
+
+config LCS
+       def_tristate m
+       prompt "Lan Channel Station Interface"
+       depends on CCW && NETDEVICES && (ETHERNET || FDDI)
+       help
+          Select this option if you want to use LCS networking on IBM System z.
+          This device driver supports FDDI (IEEE 802.7) and Ethernet.
+          To compile as a module, choose M. The module name is lcs.
+          If you do not know what it is, it's safe to choose Y.
+
+config CTCM
+       def_tristate m
+       prompt "CTC and MPC SNA device support"
+       depends on CCW && NETDEVICES
+       help
+         Select this option if you want to use channel-to-channel
+         point-to-point networking on IBM System z.
+         This device driver supports real CTC coupling using ESCON.
+         It also supports virtual CTCs when running under VM.
+         This driver also supports channel-to-channel MPC SNA devices.
+         MPC is an SNA protocol device used by Communication Server for Linux.
+         To compile as a module, choose M. The module name is ctcm.
+         To compile into the kernel, choose Y.
+         If you do not need any channel-to-channel connection, choose N.
+
+config NETIUCV
+       def_tristate m
+       prompt "IUCV network device support (VM only)"
+       depends on IUCV && NETDEVICES
+       help
+         Select this option if you want to use inter-user communication
+         vehicle networking under VM or VIF. It enables a fast communication
+         link between VM guests. Using ifconfig a point-to-point connection
+         can be established to the Linux on IBM System z
+         running on the other VM guest. To compile as a module, choose M.
+         The module name is netiucv. If unsure, choose Y.
+
+config SMSGIUCV
+       def_tristate m
+       prompt "IUCV special message support (VM only)"
+       depends on IUCV
+       help
+         Select this option if you want to be able to receive SMSG messages
+         from other VM guest systems.
+
+config SMSGIUCV_EVENT
+       def_tristate m
+       prompt "Deliver IUCV special messages as uevents (VM only)"
+       depends on SMSGIUCV
+       help
+         Select this option to deliver CP special messages (SMSGs) as
+         uevents.  The driver handles only those special messages that
+         start with "APP".
+
+         To compile as a module, choose M. The module name is "smsgiucv_app".
+
+config QETH
+       def_tristate y
+       prompt "Gigabit Ethernet device support"
+       depends on CCW && NETDEVICES && IP_MULTICAST && QDIO && ETHERNET
+       help
+         This driver supports the IBM System z OSA Express adapters
+         in QDIO mode (all media types), HiperSockets interfaces and z/VM
+         virtual NICs for Guest LAN and VSWITCH.
+       
+         For details please refer to the documentation provided by IBM at
+         <http://www.ibm.com/developerworks/linux/linux390>
+
+         To compile this driver as a module, choose M.
+         The module name is qeth.
+
+config QETH_L2
+       def_tristate y
+       prompt "qeth layer 2 device support"
+       depends on QETH
+       help
+         Select this option to be able to run qeth devices in layer 2 mode.
+         To compile as a module, choose M. The module name is qeth_l2.
+         If unsure, choose y.
+
+config QETH_L3
+       def_tristate y
+       prompt "qeth layer 3 device support"
+       depends on QETH
+       help
+         Select this option to be able to run qeth devices in layer 3 mode.
+         To compile as a module choose M. The module name is qeth_l3.
+         If unsure, choose Y.
+
+config QETH_IPV6
+       def_bool y if (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
+
+config CCWGROUP
+       tristate
+       default (LCS || CTCM || QETH)
+
+endmenu