--- /dev/null
+/*
+ * zcrypt 2.1.0
+ *
+ * Copyright IBM Corp. 2001, 2012
+ * Author(s): Robert Burroughs
+ * Eric Rossman (edrossma@us.ibm.com)
+ *
+ * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
+ * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Ralph Wuerthner <rwuerthn@de.ibm.com>
+ * MSGTYPE restruct: Holger Dengler <hd@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define KMSG_COMPONENT "zcrypt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/uaccess.h>
+
+#include "ap_bus.h"
+#include "zcrypt_api.h"
+#include "zcrypt_error.h"
+#include "zcrypt_msgtype6.h"
+#include "zcrypt_cca_key.h"
+
+#define PCIXCC_MIN_MOD_SIZE_OLD 64 /* 512 bits */
+#define PCIXCC_MAX_ICA_RESPONSE_SIZE 0x77c /* max size type86 v2 reply */
+
+#define CEIL4(x) ((((x)+3)/4)*4)
+
+struct response_type {
+ struct completion work;
+ int type;
+};
+#define PCIXCC_RESPONSE_TYPE_ICA 0
+#define PCIXCC_RESPONSE_TYPE_XCRB 1
+#define PCIXCC_RESPONSE_TYPE_EP11 2
+
+MODULE_AUTHOR("IBM Corporation");
+MODULE_DESCRIPTION("Cryptographic Coprocessor (message type 6), " \
+ "Copyright IBM Corp. 2001, 2012");
+MODULE_LICENSE("GPL");
+
+static void zcrypt_msgtype6_receive(struct ap_device *, struct ap_message *,
+ struct ap_message *);
+
+/**
+ * CPRB
+ * Note that all shorts, ints and longs are little-endian.
+ * All pointer fields are 32-bits long, and mean nothing
+ *
+ * A request CPRB is followed by a request_parameter_block.
+ *
+ * The request (or reply) parameter block is organized thus:
+ * function code
+ * VUD block
+ * key block
+ */
+struct CPRB {
+ unsigned short cprb_len; /* CPRB length */
+ unsigned char cprb_ver_id; /* CPRB version id. */
+ unsigned char pad_000; /* Alignment pad byte. */
+ unsigned char srpi_rtcode[4]; /* SRPI return code LELONG */
+ unsigned char srpi_verb; /* SRPI verb type */
+ unsigned char flags; /* flags */
+ unsigned char func_id[2]; /* function id */
+ unsigned char checkpoint_flag; /* */
+ unsigned char resv2; /* reserved */
+ unsigned short req_parml; /* request parameter buffer */
+ /* length 16-bit little endian */
+ unsigned char req_parmp[4]; /* request parameter buffer *
+ * pointer (means nothing: the *
+ * parameter buffer follows *
+ * the CPRB). */
+ unsigned char req_datal[4]; /* request data buffer */
+ /* length ULELONG */
+ unsigned char req_datap[4]; /* request data buffer */
+ /* pointer */
+ unsigned short rpl_parml; /* reply parameter buffer */
+ /* length 16-bit little endian */
+ unsigned char pad_001[2]; /* Alignment pad bytes. ULESHORT */
+ unsigned char rpl_parmp[4]; /* reply parameter buffer *
+ * pointer (means nothing: the *
+ * parameter buffer follows *
+ * the CPRB). */
+ unsigned char rpl_datal[4]; /* reply data buffer len ULELONG */
+ unsigned char rpl_datap[4]; /* reply data buffer */
+ /* pointer */
+ unsigned short ccp_rscode; /* server reason code ULESHORT */
+ unsigned short ccp_rtcode; /* server return code ULESHORT */
+ unsigned char repd_parml[2]; /* replied parameter len ULESHORT*/
+ unsigned char mac_data_len[2]; /* Mac Data Length ULESHORT */
+ unsigned char repd_datal[4]; /* replied data length ULELONG */
+ unsigned char req_pc[2]; /* PC identifier */
+ unsigned char res_origin[8]; /* resource origin */
+ unsigned char mac_value[8]; /* Mac Value */
+ unsigned char logon_id[8]; /* Logon Identifier */
+ unsigned char usage_domain[2]; /* cdx */
+ unsigned char resv3[18]; /* reserved for requestor */
+ unsigned short svr_namel; /* server name length ULESHORT */
+ unsigned char svr_name[8]; /* server name */
+} __packed;
+
+struct function_and_rules_block {
+ unsigned char function_code[2];
+ unsigned short ulen;
+ unsigned char only_rule[8];
+} __packed;
+
+/**
+ * The following is used to initialize the CPRBX passed to the PCIXCC/CEX2C
+ * card in a type6 message. The 3 fields that must be filled in at execution
+ * time are req_parml, rpl_parml and usage_domain.
+ * Everything about this interface is ascii/big-endian, since the
+ * device does *not* have 'Intel inside'.
+ *
+ * The CPRBX is followed immediately by the parm block.
+ * The parm block contains:
+ * - function code ('PD' 0x5044 or 'PK' 0x504B)
+ * - rule block (one of:)
+ * + 0x000A 'PKCS-1.2' (MCL2 'PD')
+ * + 0x000A 'ZERO-PAD' (MCL2 'PK')
+ * + 0x000A 'ZERO-PAD' (MCL3 'PD' or CEX2C 'PD')
+ * + 0x000A 'MRP ' (MCL3 'PK' or CEX2C 'PK')
+ * - VUD block
+ */
+static struct CPRBX static_cprbx = {
+ .cprb_len = 0x00DC,
+ .cprb_ver_id = 0x02,
+ .func_id = {0x54, 0x32},
+};
+
+/**
+ * Convert a ICAMEX message to a type6 MEX message.
+ *
+ * @zdev: crypto device pointer
+ * @ap_msg: pointer to AP message
+ * @mex: pointer to user input data
+ *
+ * Returns 0 on success or -EFAULT.
+ */
+static int ICAMEX_msg_to_type6MEX_msgX(struct zcrypt_device *zdev,
+ struct ap_message *ap_msg,
+ struct ica_rsa_modexpo *mex)
+{
+ static struct type6_hdr static_type6_hdrX = {
+ .type = 0x06,
+ .offset1 = 0x00000058,
+ .agent_id = {'C', 'A',},
+ .function_code = {'P', 'K'},
+ };
+ static struct function_and_rules_block static_pke_fnr = {
+ .function_code = {'P', 'K'},
+ .ulen = 10,
+ .only_rule = {'M', 'R', 'P', ' ', ' ', ' ', ' ', ' '}
+ };
+ static struct function_and_rules_block static_pke_fnr_MCL2 = {
+ .function_code = {'P', 'K'},
+ .ulen = 10,
+ .only_rule = {'Z', 'E', 'R', 'O', '-', 'P', 'A', 'D'}
+ };
+ struct {
+ struct type6_hdr hdr;
+ struct CPRBX cprbx;
+ struct function_and_rules_block fr;
+ unsigned short length;
+ char text[0];
+ } __packed * msg = ap_msg->message;
+ int size;
+
+ /* VUD.ciphertext */
+ msg->length = mex->inputdatalength + 2;
+ if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength))
+ return -EFAULT;
+
+ /* Set up key which is located after the variable length text. */
+ size = zcrypt_type6_mex_key_en(mex, msg->text+mex->inputdatalength, 1);
+ if (size < 0)
+ return size;
+ size += sizeof(*msg) + mex->inputdatalength;
+
+ /* message header, cprbx and f&r */
+ msg->hdr = static_type6_hdrX;
+ msg->hdr.ToCardLen1 = size - sizeof(msg->hdr);
+ msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr);
+
+ msg->cprbx = static_cprbx;
+ msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid);
+ msg->cprbx.rpl_msgbl = msg->hdr.FromCardLen1;
+
+ msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ?
+ static_pke_fnr_MCL2 : static_pke_fnr;
+
+ msg->cprbx.req_parml = size - sizeof(msg->hdr) - sizeof(msg->cprbx);
+
+ ap_msg->length = size;
+ return 0;
+}
+
+/**
+ * Convert a ICACRT message to a type6 CRT message.
+ *
+ * @zdev: crypto device pointer
+ * @ap_msg: pointer to AP message
+ * @crt: pointer to user input data
+ *
+ * Returns 0 on success or -EFAULT.
+ */
+static int ICACRT_msg_to_type6CRT_msgX(struct zcrypt_device *zdev,
+ struct ap_message *ap_msg,
+ struct ica_rsa_modexpo_crt *crt)
+{
+ static struct type6_hdr static_type6_hdrX = {
+ .type = 0x06,
+ .offset1 = 0x00000058,
+ .agent_id = {'C', 'A',},
+ .function_code = {'P', 'D'},
+ };
+ static struct function_and_rules_block static_pkd_fnr = {
+ .function_code = {'P', 'D'},
+ .ulen = 10,
+ .only_rule = {'Z', 'E', 'R', 'O', '-', 'P', 'A', 'D'}
+ };
+
+ static struct function_and_rules_block static_pkd_fnr_MCL2 = {
+ .function_code = {'P', 'D'},
+ .ulen = 10,
+ .only_rule = {'P', 'K', 'C', 'S', '-', '1', '.', '2'}
+ };
+ struct {
+ struct type6_hdr hdr;
+ struct CPRBX cprbx;
+ struct function_and_rules_block fr;
+ unsigned short length;
+ char text[0];
+ } __packed * msg = ap_msg->message;
+ int size;
+
+ /* VUD.ciphertext */
+ msg->length = crt->inputdatalength + 2;
+ if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength))
+ return -EFAULT;
+
+ /* Set up key which is located after the variable length text. */
+ size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 1);
+ if (size < 0)
+ return size;
+ size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */
+
+ /* message header, cprbx and f&r */
+ msg->hdr = static_type6_hdrX;
+ msg->hdr.ToCardLen1 = size - sizeof(msg->hdr);
+ msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr);
+
+ msg->cprbx = static_cprbx;
+ msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid);
+ msg->cprbx.req_parml = msg->cprbx.rpl_msgbl =
+ size - sizeof(msg->hdr) - sizeof(msg->cprbx);
+
+ msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ?
+ static_pkd_fnr_MCL2 : static_pkd_fnr;
+
+ ap_msg->length = size;
+ return 0;
+}
+
+/**
+ * Convert a XCRB message to a type6 CPRB message.
+ *
+ * @zdev: crypto device pointer
+ * @ap_msg: pointer to AP message
+ * @xcRB: pointer to user input data
+ *
+ * Returns 0 on success or -EFAULT, -EINVAL.
+ */
+struct type86_fmt2_msg {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+} __packed;
+
+static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev,
+ struct ap_message *ap_msg,
+ struct ica_xcRB *xcRB)
+{
+ static struct type6_hdr static_type6_hdrX = {
+ .type = 0x06,
+ .offset1 = 0x00000058,
+ };
+ struct {
+ struct type6_hdr hdr;
+ struct CPRBX cprbx;
+ } __packed * msg = ap_msg->message;
+
+ int rcblen = CEIL4(xcRB->request_control_blk_length);
+ int replylen, req_sumlen, resp_sumlen;
+ char *req_data = ap_msg->message + sizeof(struct type6_hdr) + rcblen;
+ char *function_code;
+
+ if (CEIL4(xcRB->request_control_blk_length) <
+ xcRB->request_control_blk_length)
+ return -EINVAL; /* overflow after alignment*/
+
+ /* length checks */
+ ap_msg->length = sizeof(struct type6_hdr) +
+ CEIL4(xcRB->request_control_blk_length) +
+ xcRB->request_data_length;
+ if (ap_msg->length > MSGTYPE06_MAX_MSG_SIZE)
+ return -EINVAL;
+
+ /* Overflow check
+ sum must be greater (or equal) than the largest operand */
+ req_sumlen = CEIL4(xcRB->request_control_blk_length) +
+ xcRB->request_data_length;
+ if ((CEIL4(xcRB->request_control_blk_length) <=
+ xcRB->request_data_length) ?
+ (req_sumlen < xcRB->request_data_length) :
+ (req_sumlen < CEIL4(xcRB->request_control_blk_length))) {
+ return -EINVAL;
+ }
+
+ if (CEIL4(xcRB->reply_control_blk_length) <
+ xcRB->reply_control_blk_length)
+ return -EINVAL; /* overflow after alignment*/
+
+ replylen = sizeof(struct type86_fmt2_msg) +
+ CEIL4(xcRB->reply_control_blk_length) +
+ xcRB->reply_data_length;
+ if (replylen > MSGTYPE06_MAX_MSG_SIZE)
+ return -EINVAL;
+
+ /* Overflow check
+ sum must be greater (or equal) than the largest operand */
+ resp_sumlen = CEIL4(xcRB->reply_control_blk_length) +
+ xcRB->reply_data_length;
+ if ((CEIL4(xcRB->reply_control_blk_length) <= xcRB->reply_data_length) ?
+ (resp_sumlen < xcRB->reply_data_length) :
+ (resp_sumlen < CEIL4(xcRB->reply_control_blk_length))) {
+ return -EINVAL;
+ }
+
+ /* prepare type6 header */
+ msg->hdr = static_type6_hdrX;
+ memcpy(msg->hdr.agent_id , &(xcRB->agent_ID), sizeof(xcRB->agent_ID));
+ msg->hdr.ToCardLen1 = xcRB->request_control_blk_length;
+ if (xcRB->request_data_length) {
+ msg->hdr.offset2 = msg->hdr.offset1 + rcblen;
+ msg->hdr.ToCardLen2 = xcRB->request_data_length;
+ }
+ msg->hdr.FromCardLen1 = xcRB->reply_control_blk_length;
+ msg->hdr.FromCardLen2 = xcRB->reply_data_length;
+
+ /* prepare CPRB */
+ if (copy_from_user(&(msg->cprbx), xcRB->request_control_blk_addr,
+ xcRB->request_control_blk_length))
+ return -EFAULT;
+ if (msg->cprbx.cprb_len + sizeof(msg->hdr.function_code) >
+ xcRB->request_control_blk_length)
+ return -EINVAL;
+ function_code = ((unsigned char *)&msg->cprbx) + msg->cprbx.cprb_len;
+ memcpy(msg->hdr.function_code, function_code,
+ sizeof(msg->hdr.function_code));
+
+ if (memcmp(function_code, "US", 2) == 0)
+ ap_msg->special = 1;
+ else
+ ap_msg->special = 0;
+
+ /* copy data block */
+ if (xcRB->request_data_length &&
+ copy_from_user(req_data, xcRB->request_data_address,
+ xcRB->request_data_length))
+ return -EFAULT;
+ return 0;
+}
+
+static int xcrb_msg_to_type6_ep11cprb_msgx(struct zcrypt_device *zdev,
+ struct ap_message *ap_msg,
+ struct ep11_urb *xcRB)
+{
+ unsigned int lfmt;
+
+ static struct type6_hdr static_type6_ep11_hdr = {
+ .type = 0x06,
+ .rqid = {0x00, 0x01},
+ .function_code = {0x00, 0x00},
+ .agent_id[0] = 0x58, /* {'X'} */
+ .agent_id[1] = 0x43, /* {'C'} */
+ .offset1 = 0x00000058,
+ };
+
+ struct {
+ struct type6_hdr hdr;
+ struct ep11_cprb cprbx;
+ unsigned char pld_tag; /* fixed value 0x30 */
+ unsigned char pld_lenfmt; /* payload length format */
+ } __packed * msg = ap_msg->message;
+
+ struct pld_hdr {
+ unsigned char func_tag; /* fixed value 0x4 */
+ unsigned char func_len; /* fixed value 0x4 */
+ unsigned int func_val; /* function ID */
+ unsigned char dom_tag; /* fixed value 0x4 */
+ unsigned char dom_len; /* fixed value 0x4 */
+ unsigned int dom_val; /* domain id */
+ } __packed * payload_hdr;
+
+ if (CEIL4(xcRB->req_len) < xcRB->req_len)
+ return -EINVAL; /* overflow after alignment*/
+
+ /* length checks */
+ ap_msg->length = sizeof(struct type6_hdr) + xcRB->req_len;
+ if (CEIL4(xcRB->req_len) > MSGTYPE06_MAX_MSG_SIZE -
+ (sizeof(struct type6_hdr)))
+ return -EINVAL;
+
+ if (CEIL4(xcRB->resp_len) < xcRB->resp_len)
+ return -EINVAL; /* overflow after alignment*/
+
+ if (CEIL4(xcRB->resp_len) > MSGTYPE06_MAX_MSG_SIZE -
+ (sizeof(struct type86_fmt2_msg)))
+ return -EINVAL;
+
+ /* prepare type6 header */
+ msg->hdr = static_type6_ep11_hdr;
+ msg->hdr.ToCardLen1 = xcRB->req_len;
+ msg->hdr.FromCardLen1 = xcRB->resp_len;
+
+ /* Import CPRB data from the ioctl input parameter */
+ if (copy_from_user(&(msg->cprbx.cprb_len),
+ (char __force __user *)xcRB->req, xcRB->req_len)) {
+ return -EFAULT;
+ }
+
+ /*
+ The target domain field within the cprb body/payload block will be
+ replaced by the usage domain for non-management commands only.
+ Therefore we check the first bit of the 'flags' parameter for
+ management command indication.
+ 0 - non management command
+ 1 - management command
+ */
+ if (!((msg->cprbx.flags & 0x80) == 0x80)) {
+ msg->cprbx.target_id = (unsigned int)
+ AP_QID_QUEUE(zdev->ap_dev->qid);
+
+ if ((msg->pld_lenfmt & 0x80) == 0x80) { /*ext.len.fmt 2 or 3*/
+ switch (msg->pld_lenfmt & 0x03) {
+ case 1:
+ lfmt = 2;
+ break;
+ case 2:
+ lfmt = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ lfmt = 1; /* length format #1 */
+ }
+ payload_hdr = (struct pld_hdr *)((&(msg->pld_lenfmt))+lfmt);
+ payload_hdr->dom_val = (unsigned int)
+ AP_QID_QUEUE(zdev->ap_dev->qid);
+ }
+ return 0;
+}
+
+/**
+ * Copy results from a type 86 ICA reply message back to user space.
+ *
+ * @zdev: crypto device pointer
+ * @reply: reply AP message.
+ * @data: pointer to user output data
+ * @length: size of user output data
+ *
+ * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
+ */
+struct type86x_reply {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+ struct CPRBX cprbx;
+ unsigned char pad[4]; /* 4 byte function code/rules block ? */
+ unsigned short length;
+ char text[0];
+} __packed;
+
+struct type86_ep11_reply {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+ struct ep11_cprb cprbx;
+} __packed;
+
+static int convert_type86_ica(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char __user *outputdata,
+ unsigned int outputdatalength)
+{
+ static unsigned char static_pad[] = {
+ 0x00, 0x02,
+ 0x1B, 0x7B, 0x5D, 0xB5, 0x75, 0x01, 0x3D, 0xFD,
+ 0x8D, 0xD1, 0xC7, 0x03, 0x2D, 0x09, 0x23, 0x57,
+ 0x89, 0x49, 0xB9, 0x3F, 0xBB, 0x99, 0x41, 0x5B,
+ 0x75, 0x21, 0x7B, 0x9D, 0x3B, 0x6B, 0x51, 0x39,
+ 0xBB, 0x0D, 0x35, 0xB9, 0x89, 0x0F, 0x93, 0xA5,
+ 0x0B, 0x47, 0xF1, 0xD3, 0xBB, 0xCB, 0xF1, 0x9D,
+ 0x23, 0x73, 0x71, 0xFF, 0xF3, 0xF5, 0x45, 0xFB,
+ 0x61, 0x29, 0x23, 0xFD, 0xF1, 0x29, 0x3F, 0x7F,
+ 0x17, 0xB7, 0x1B, 0xA9, 0x19, 0xBD, 0x57, 0xA9,
+ 0xD7, 0x95, 0xA3, 0xCB, 0xED, 0x1D, 0xDB, 0x45,
+ 0x7D, 0x11, 0xD1, 0x51, 0x1B, 0xED, 0x71, 0xE9,
+ 0xB1, 0xD1, 0xAB, 0xAB, 0x21, 0x2B, 0x1B, 0x9F,
+ 0x3B, 0x9F, 0xF7, 0xF7, 0xBD, 0x63, 0xEB, 0xAD,
+ 0xDF, 0xB3, 0x6F, 0x5B, 0xDB, 0x8D, 0xA9, 0x5D,
+ 0xE3, 0x7D, 0x77, 0x49, 0x47, 0xF5, 0xA7, 0xFD,
+ 0xAB, 0x2F, 0x27, 0x35, 0x77, 0xD3, 0x49, 0xC9,
+ 0x09, 0xEB, 0xB1, 0xF9, 0xBF, 0x4B, 0xCB, 0x2B,
+ 0xEB, 0xEB, 0x05, 0xFF, 0x7D, 0xC7, 0x91, 0x8B,
+ 0x09, 0x83, 0xB9, 0xB9, 0x69, 0x33, 0x39, 0x6B,
+ 0x79, 0x75, 0x19, 0xBF, 0xBB, 0x07, 0x1D, 0xBD,
+ 0x29, 0xBF, 0x39, 0x95, 0x93, 0x1D, 0x35, 0xC7,
+ 0xC9, 0x4D, 0xE5, 0x97, 0x0B, 0x43, 0x9B, 0xF1,
+ 0x16, 0x93, 0x03, 0x1F, 0xA5, 0xFB, 0xDB, 0xF3,
+ 0x27, 0x4F, 0x27, 0x61, 0x05, 0x1F, 0xB9, 0x23,
+ 0x2F, 0xC3, 0x81, 0xA9, 0x23, 0x71, 0x55, 0x55,
+ 0xEB, 0xED, 0x41, 0xE5, 0xF3, 0x11, 0xF1, 0x43,
+ 0x69, 0x03, 0xBD, 0x0B, 0x37, 0x0F, 0x51, 0x8F,
+ 0x0B, 0xB5, 0x89, 0x5B, 0x67, 0xA9, 0xD9, 0x4F,
+ 0x01, 0xF9, 0x21, 0x77, 0x37, 0x73, 0x79, 0xC5,
+ 0x7F, 0x51, 0xC1, 0xCF, 0x97, 0xA1, 0x75, 0xAD,
+ 0x35, 0x9D, 0xD3, 0xD3, 0xA7, 0x9D, 0x5D, 0x41,
+ 0x6F, 0x65, 0x1B, 0xCF, 0xA9, 0x87, 0x91, 0x09
+ };
+ struct type86x_reply *msg = reply->message;
+ unsigned short service_rc, service_rs;
+ unsigned int reply_len, pad_len;
+ char *data;
+
+ service_rc = msg->cprbx.ccp_rtcode;
+ if (unlikely(service_rc != 0)) {
+ service_rs = msg->cprbx.ccp_rscode;
+ if (service_rc == 8 && service_rs == 66)
+ return -EINVAL;
+ if (service_rc == 8 && service_rs == 65)
+ return -EINVAL;
+ if (service_rc == 8 && service_rs == 770)
+ return -EINVAL;
+ if (service_rc == 8 && service_rs == 783) {
+ zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD;
+ return -EAGAIN;
+ }
+ if (service_rc == 12 && service_rs == 769)
+ return -EINVAL;
+ if (service_rc == 8 && service_rs == 72)
+ return -EINVAL;
+ zdev->online = 0;
+ pr_err("Cryptographic device %x failed and was set offline\n",
+ zdev->ap_dev->qid);
+ ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
+ zdev->ap_dev->qid, zdev->online,
+ msg->hdr.reply_code);
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+ data = msg->text;
+ reply_len = msg->length - 2;
+ if (reply_len > outputdatalength)
+ return -EINVAL;
+ /*
+ * For all encipher requests, the length of the ciphertext (reply_len)
+ * will always equal the modulus length. For MEX decipher requests
+ * the output needs to get padded. Minimum pad size is 10.
+ *
+ * Currently, the cases where padding will be added is for:
+ * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support
+ * ZERO-PAD and CRT is only supported for PKD requests)
+ * - PCICC, always
+ */
+ pad_len = outputdatalength - reply_len;
+ if (pad_len > 0) {
+ if (pad_len < 10)
+ return -EINVAL;
+ /* 'restore' padding left in the PCICC/PCIXCC card. */
+ if (copy_to_user(outputdata, static_pad, pad_len - 1))
+ return -EFAULT;
+ if (put_user(0, outputdata + pad_len - 1))
+ return -EFAULT;
+ }
+ /* Copy the crypto response to user space. */
+ if (copy_to_user(outputdata + pad_len, data, reply_len))
+ return -EFAULT;
+ return 0;
+}
+
+/**
+ * Copy results from a type 86 XCRB reply message back to user space.
+ *
+ * @zdev: crypto device pointer
+ * @reply: reply AP message.
+ * @xcRB: pointer to XCRB
+ *
+ * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
+ */
+static int convert_type86_xcrb(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ struct ica_xcRB *xcRB)
+{
+ struct type86_fmt2_msg *msg = reply->message;
+ char *data = reply->message;
+
+ /* Copy CPRB to user */
+ if (copy_to_user(xcRB->reply_control_blk_addr,
+ data + msg->fmt2.offset1, msg->fmt2.count1))
+ return -EFAULT;
+ xcRB->reply_control_blk_length = msg->fmt2.count1;
+
+ /* Copy data buffer to user */
+ if (msg->fmt2.count2)
+ if (copy_to_user(xcRB->reply_data_addr,
+ data + msg->fmt2.offset2, msg->fmt2.count2))
+ return -EFAULT;
+ xcRB->reply_data_length = msg->fmt2.count2;
+ return 0;
+}
+
+/**
+ * Copy results from a type 86 EP11 XCRB reply message back to user space.
+ *
+ * @zdev: crypto device pointer
+ * @reply: reply AP message.
+ * @xcRB: pointer to EP11 user request block
+ *
+ * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
+ */
+static int convert_type86_ep11_xcrb(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ struct ep11_urb *xcRB)
+{
+ struct type86_fmt2_msg *msg = reply->message;
+ char *data = reply->message;
+
+ if (xcRB->resp_len < msg->fmt2.count1)
+ return -EINVAL;
+
+ /* Copy response CPRB to user */
+ if (copy_to_user((char __force __user *)xcRB->resp,
+ data + msg->fmt2.offset1, msg->fmt2.count1))
+ return -EFAULT;
+ xcRB->resp_len = msg->fmt2.count1;
+ return 0;
+}
+
+static int convert_type86_rng(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char *buffer)
+{
+ struct {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+ struct CPRBX cprbx;
+ } __packed * msg = reply->message;
+ char *data = reply->message;
+
+ if (msg->cprbx.ccp_rtcode != 0 || msg->cprbx.ccp_rscode != 0)
+ return -EINVAL;
+ memcpy(buffer, data + msg->fmt2.offset2, msg->fmt2.count2);
+ return msg->fmt2.count2;
+}
+
+static int convert_response_ica(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char __user *outputdata,
+ unsigned int outputdatalength)
+{
+ struct type86x_reply *msg = reply->message;
+
+ /* Response type byte is the second byte in the response. */
+ switch (((unsigned char *) reply->message)[1]) {
+ case TYPE82_RSP_CODE:
+ case TYPE88_RSP_CODE:
+ return convert_error(zdev, reply);
+ case TYPE86_RSP_CODE:
+ if (msg->cprbx.ccp_rtcode &&
+ (msg->cprbx.ccp_rscode == 0x14f) &&
+ (outputdatalength > 256)) {
+ if (zdev->max_exp_bit_length <= 17) {
+ zdev->max_exp_bit_length = 17;
+ return -EAGAIN;
+ } else
+ return -EINVAL;
+ }
+ if (msg->hdr.reply_code)
+ return convert_error(zdev, reply);
+ if (msg->cprbx.cprb_ver_id == 0x02)
+ return convert_type86_ica(zdev, reply,
+ outputdata, outputdatalength);
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
+ default: /* Unknown response type, this should NEVER EVER happen */
+ zdev->online = 0;
+ pr_err("Cryptographic device %x failed and was set offline\n",
+ zdev->ap_dev->qid);
+ ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+ zdev->ap_dev->qid, zdev->online);
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+}
+
+static int convert_response_xcrb(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ struct ica_xcRB *xcRB)
+{
+ struct type86x_reply *msg = reply->message;
+
+ /* Response type byte is the second byte in the response. */
+ switch (((unsigned char *) reply->message)[1]) {
+ case TYPE82_RSP_CODE:
+ case TYPE88_RSP_CODE:
+ xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
+ return convert_error(zdev, reply);
+ case TYPE86_RSP_CODE:
+ if (msg->hdr.reply_code) {
+ memcpy(&(xcRB->status), msg->fmt2.apfs, sizeof(u32));
+ return convert_error(zdev, reply);
+ }
+ if (msg->cprbx.cprb_ver_id == 0x02)
+ return convert_type86_xcrb(zdev, reply, xcRB);
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
+ default: /* Unknown response type, this should NEVER EVER happen */
+ xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
+ zdev->online = 0;
+ pr_err("Cryptographic device %x failed and was set offline\n",
+ zdev->ap_dev->qid);
+ ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+ zdev->ap_dev->qid, zdev->online);
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+}
+
+static int convert_response_ep11_xcrb(struct zcrypt_device *zdev,
+ struct ap_message *reply, struct ep11_urb *xcRB)
+{
+ struct type86_ep11_reply *msg = reply->message;
+
+ /* Response type byte is the second byte in the response. */
+ switch (((unsigned char *)reply->message)[1]) {
+ case TYPE82_RSP_CODE:
+ case TYPE87_RSP_CODE:
+ return convert_error(zdev, reply);
+ case TYPE86_RSP_CODE:
+ if (msg->hdr.reply_code)
+ return convert_error(zdev, reply);
+ if (msg->cprbx.cprb_ver_id == 0x04)
+ return convert_type86_ep11_xcrb(zdev, reply, xcRB);
+ /* Fall through, no break, incorrect cprb version is an unknown resp.*/
+ default: /* Unknown response type, this should NEVER EVER happen */
+ zdev->online = 0;
+ pr_err("Cryptographic device %x failed and was set offline\n",
+ zdev->ap_dev->qid);
+ ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+ zdev->ap_dev->qid, zdev->online);
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+}
+
+static int convert_response_rng(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char *data)
+{
+ struct type86x_reply *msg = reply->message;
+
+ switch (msg->hdr.type) {
+ case TYPE82_RSP_CODE:
+ case TYPE88_RSP_CODE:
+ return -EINVAL;
+ case TYPE86_RSP_CODE:
+ if (msg->hdr.reply_code)
+ return -EINVAL;
+ if (msg->cprbx.cprb_ver_id == 0x02)
+ return convert_type86_rng(zdev, reply, data);
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
+ default: /* Unknown response type, this should NEVER EVER happen */
+ zdev->online = 0;
+ pr_err("Cryptographic device %x failed and was set offline\n",
+ zdev->ap_dev->qid);
+ ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+ zdev->ap_dev->qid, zdev->online);
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+}
+
+/**
+ * This function is called from the AP bus code after a crypto request
+ * "msg" has finished with the reply message "reply".
+ * It is called from tasklet context.
+ * @ap_dev: pointer to the AP device
+ * @msg: pointer to the AP message
+ * @reply: pointer to the AP reply message
+ */
+static void zcrypt_msgtype6_receive(struct ap_device *ap_dev,
+ struct ap_message *msg,
+ struct ap_message *reply)
+{
+ static struct error_hdr error_reply = {
+ .type = TYPE82_RSP_CODE,
+ .reply_code = REP82_ERROR_MACHINE_FAILURE,
+ };
+ struct response_type *resp_type =
+ (struct response_type *) msg->private;
+ struct type86x_reply *t86r;
+ int length;
+
+ /* Copy the reply message to the request message buffer. */
+ if (IS_ERR(reply)) {
+ memcpy(msg->message, &error_reply, sizeof(error_reply));
+ goto out;
+ }
+ t86r = reply->message;
+ if (t86r->hdr.type == TYPE86_RSP_CODE &&
+ t86r->cprbx.cprb_ver_id == 0x02) {
+ switch (resp_type->type) {
+ case PCIXCC_RESPONSE_TYPE_ICA:
+ length = sizeof(struct type86x_reply)
+ + t86r->length - 2;
+ length = min(PCIXCC_MAX_ICA_RESPONSE_SIZE, length);
+ memcpy(msg->message, reply->message, length);
+ break;
+ case PCIXCC_RESPONSE_TYPE_XCRB:
+ length = t86r->fmt2.offset2 + t86r->fmt2.count2;
+ length = min(MSGTYPE06_MAX_MSG_SIZE, length);
+ memcpy(msg->message, reply->message, length);
+ break;
+ default:
+ memcpy(msg->message, &error_reply,
+ sizeof(error_reply));
+ }
+ } else
+ memcpy(msg->message, reply->message, sizeof(error_reply));
+out:
+ complete(&(resp_type->work));
+}
+
+/**
+ * This function is called from the AP bus code after a crypto request
+ * "msg" has finished with the reply message "reply".
+ * It is called from tasklet context.
+ * @ap_dev: pointer to the AP device
+ * @msg: pointer to the AP message
+ * @reply: pointer to the AP reply message
+ */
+static void zcrypt_msgtype6_receive_ep11(struct ap_device *ap_dev,
+ struct ap_message *msg,
+ struct ap_message *reply)
+{
+ static struct error_hdr error_reply = {
+ .type = TYPE82_RSP_CODE,
+ .reply_code = REP82_ERROR_MACHINE_FAILURE,
+ };
+ struct response_type *resp_type =
+ (struct response_type *)msg->private;
+ struct type86_ep11_reply *t86r;
+ int length;
+
+ /* Copy the reply message to the request message buffer. */
+ if (IS_ERR(reply)) {
+ memcpy(msg->message, &error_reply, sizeof(error_reply));
+ goto out;
+ }
+ t86r = reply->message;
+ if (t86r->hdr.type == TYPE86_RSP_CODE &&
+ t86r->cprbx.cprb_ver_id == 0x04) {
+ switch (resp_type->type) {
+ case PCIXCC_RESPONSE_TYPE_EP11:
+ length = t86r->fmt2.offset1 + t86r->fmt2.count1;
+ length = min(MSGTYPE06_MAX_MSG_SIZE, length);
+ memcpy(msg->message, reply->message, length);
+ break;
+ default:
+ memcpy(msg->message, &error_reply, sizeof(error_reply));
+ }
+ } else {
+ memcpy(msg->message, reply->message, sizeof(error_reply));
+ }
+out:
+ complete(&(resp_type->work));
+}
+
+static atomic_t zcrypt_step = ATOMIC_INIT(0);
+
+/**
+ * The request distributor calls this function if it picked the PCIXCC/CEX2C
+ * device to handle a modexpo request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * PCIXCC/CEX2C device to the request distributor
+ * @mex: pointer to the modexpo request buffer
+ */
+static long zcrypt_msgtype6_modexpo(struct zcrypt_device *zdev,
+ struct ica_rsa_modexpo *mex)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_ICA,
+ };
+ int rc;
+
+ ap_init_message(&ap_msg);
+ ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.receive = zcrypt_msgtype6_receive;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rc = ICAMEX_msg_to_type6MEX_msgX(zdev, &ap_msg, mex);
+ if (rc)
+ goto out_free;
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_ica(zdev, &ap_msg, mex->outputdata,
+ mex->outputdatalength);
+ else
+ /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+out_free:
+ free_page((unsigned long) ap_msg.message);
+ return rc;
+}
+
+/**
+ * The request distributor calls this function if it picked the PCIXCC/CEX2C
+ * device to handle a modexpo_crt request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * PCIXCC/CEX2C device to the request distributor
+ * @crt: pointer to the modexpoc_crt request buffer
+ */
+static long zcrypt_msgtype6_modexpo_crt(struct zcrypt_device *zdev,
+ struct ica_rsa_modexpo_crt *crt)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_ICA,
+ };
+ int rc;
+
+ ap_init_message(&ap_msg);
+ ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.receive = zcrypt_msgtype6_receive;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rc = ICACRT_msg_to_type6CRT_msgX(zdev, &ap_msg, crt);
+ if (rc)
+ goto out_free;
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_ica(zdev, &ap_msg, crt->outputdata,
+ crt->outputdatalength);
+ else
+ /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+out_free:
+ free_page((unsigned long) ap_msg.message);
+ return rc;
+}
+
+/**
+ * The request distributor calls this function if it picked the PCIXCC/CEX2C
+ * device to handle a send_cprb request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * PCIXCC/CEX2C device to the request distributor
+ * @xcRB: pointer to the send_cprb request buffer
+ */
+static long zcrypt_msgtype6_send_cprb(struct zcrypt_device *zdev,
+ struct ica_xcRB *xcRB)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_XCRB,
+ };
+ int rc;
+
+ ap_init_message(&ap_msg);
+ ap_msg.message = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.receive = zcrypt_msgtype6_receive;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rc = XCRB_msg_to_type6CPRB_msgX(zdev, &ap_msg, xcRB);
+ if (rc)
+ goto out_free;
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_xcrb(zdev, &ap_msg, xcRB);
+ else
+ /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+out_free:
+ kzfree(ap_msg.message);
+ return rc;
+}
+
+/**
+ * The request distributor calls this function if it picked the CEX4P
+ * device to handle a send_ep11_cprb request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * CEX4P device to the request distributor
+ * @xcRB: pointer to the ep11 user request block
+ */
+static long zcrypt_msgtype6_send_ep11_cprb(struct zcrypt_device *zdev,
+ struct ep11_urb *xcrb)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_EP11,
+ };
+ int rc;
+
+ ap_init_message(&ap_msg);
+ ap_msg.message = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.receive = zcrypt_msgtype6_receive_ep11;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rc = xcrb_msg_to_type6_ep11cprb_msgx(zdev, &ap_msg, xcrb);
+ if (rc)
+ goto out_free;
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_ep11_xcrb(zdev, &ap_msg, xcrb);
+ else /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+
+out_free:
+ kzfree(ap_msg.message);
+ return rc;
+}
+
+/**
+ * The request distributor calls this function if it picked the PCIXCC/CEX2C
+ * device to generate random data.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * PCIXCC/CEX2C device to the request distributor
+ * @buffer: pointer to a memory page to return random data
+ */
+
+static long zcrypt_msgtype6_rng(struct zcrypt_device *zdev,
+ char *buffer)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_XCRB,
+ };
+ int rc;
+
+ ap_init_message(&ap_msg);
+ ap_msg.message = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.receive = zcrypt_msgtype6_receive;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rng_type6CPRB_msgX(zdev->ap_dev, &ap_msg, ZCRYPT_RNG_BUFFER_SIZE);
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_rng(zdev, &ap_msg, buffer);
+ else
+ /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+ kfree(ap_msg.message);
+ return rc;
+}
+
+/**
+ * The crypto operations for a PCIXCC/CEX2C card.
+ */
+static struct zcrypt_ops zcrypt_msgtype6_norng_ops = {
+ .owner = THIS_MODULE,
+ .variant = MSGTYPE06_VARIANT_NORNG,
+ .rsa_modexpo = zcrypt_msgtype6_modexpo,
+ .rsa_modexpo_crt = zcrypt_msgtype6_modexpo_crt,
+ .send_cprb = zcrypt_msgtype6_send_cprb,
+};
+
+static struct zcrypt_ops zcrypt_msgtype6_ops = {
+ .owner = THIS_MODULE,
+ .variant = MSGTYPE06_VARIANT_DEFAULT,
+ .rsa_modexpo = zcrypt_msgtype6_modexpo,
+ .rsa_modexpo_crt = zcrypt_msgtype6_modexpo_crt,
+ .send_cprb = zcrypt_msgtype6_send_cprb,
+ .rng = zcrypt_msgtype6_rng,
+};
+
+static struct zcrypt_ops zcrypt_msgtype6_ep11_ops = {
+ .owner = THIS_MODULE,
+ .variant = MSGTYPE06_VARIANT_EP11,
+ .rsa_modexpo = NULL,
+ .rsa_modexpo_crt = NULL,
+ .send_ep11_cprb = zcrypt_msgtype6_send_ep11_cprb,
+};
+
+int __init zcrypt_msgtype6_init(void)
+{
+ zcrypt_msgtype_register(&zcrypt_msgtype6_norng_ops);
+ zcrypt_msgtype_register(&zcrypt_msgtype6_ops);
+ zcrypt_msgtype_register(&zcrypt_msgtype6_ep11_ops);
+ return 0;
+}
+
+void __exit zcrypt_msgtype6_exit(void)
+{
+ zcrypt_msgtype_unregister(&zcrypt_msgtype6_norng_ops);
+ zcrypt_msgtype_unregister(&zcrypt_msgtype6_ops);
+ zcrypt_msgtype_unregister(&zcrypt_msgtype6_ep11_ops);
+}
+
+module_init(zcrypt_msgtype6_init);
+module_exit(zcrypt_msgtype6_exit);
Code Review / kvmfornfv.git / blobdiff