--- /dev/null
+/*
+ * Copyright IBM Corp. 2006, 2012
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Ralph Wuerthner <rwuerthn@de.ibm.com>
+ * Felix Beck <felix.beck@de.ibm.com>
+ * Holger Dengler <hd@linux.vnet.ibm.com>
+ *
+ * Adjunct processor bus.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define KMSG_COMPONENT "ap"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <asm/reset.h>
+#include <asm/airq.h>
+#include <linux/atomic.h>
+#include <asm/isc.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <asm/facility.h>
+#include <linux/crypto.h>
+
+#include "ap_bus.h"
+
+/* Some prototypes. */
+static void ap_scan_bus(struct work_struct *);
+static void ap_poll_all(unsigned long);
+static enum hrtimer_restart ap_poll_timeout(struct hrtimer *);
+static int ap_poll_thread_start(void);
+static void ap_poll_thread_stop(void);
+static void ap_request_timeout(unsigned long);
+static inline void ap_schedule_poll_timer(void);
+static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
+static int ap_device_remove(struct device *dev);
+static int ap_device_probe(struct device *dev);
+static void ap_interrupt_handler(struct airq_struct *airq);
+static void ap_reset(struct ap_device *ap_dev);
+static void ap_config_timeout(unsigned long ptr);
+static int ap_select_domain(void);
+static void ap_query_configuration(void);
+
+/*
+ * Module description.
+ */
+MODULE_AUTHOR("IBM Corporation");
+MODULE_DESCRIPTION("Adjunct Processor Bus driver, " \
+ "Copyright IBM Corp. 2006, 2012");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("z90crypt");
+
+/*
+ * Module parameter
+ */
+int ap_domain_index = -1; /* Adjunct Processor Domain Index */
+module_param_named(domain, ap_domain_index, int, S_IRUSR|S_IRGRP);
+MODULE_PARM_DESC(domain, "domain index for ap devices");
+EXPORT_SYMBOL(ap_domain_index);
+
+static int ap_thread_flag = 0;
+module_param_named(poll_thread, ap_thread_flag, int, S_IRUSR|S_IRGRP);
+MODULE_PARM_DESC(poll_thread, "Turn on/off poll thread, default is 0 (off).");
+
+static struct device *ap_root_device = NULL;
+static struct ap_config_info *ap_configuration;
+static DEFINE_SPINLOCK(ap_device_list_lock);
+static LIST_HEAD(ap_device_list);
+
+/*
+ * Workqueue & timer for bus rescan.
+ */
+static struct workqueue_struct *ap_work_queue;
+static struct timer_list ap_config_timer;
+static int ap_config_time = AP_CONFIG_TIME;
+static DECLARE_WORK(ap_config_work, ap_scan_bus);
+
+/*
+ * Tasklet & timer for AP request polling and interrupts
+ */
+static DECLARE_TASKLET(ap_tasklet, ap_poll_all, 0);
+static atomic_t ap_poll_requests = ATOMIC_INIT(0);
+static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
+static struct task_struct *ap_poll_kthread = NULL;
+static DEFINE_MUTEX(ap_poll_thread_mutex);
+static DEFINE_SPINLOCK(ap_poll_timer_lock);
+static struct hrtimer ap_poll_timer;
+/* In LPAR poll with 4kHz frequency. Poll every 250000 nanoseconds.
+ * If z/VM change to 1500000 nanoseconds to adjust to z/VM polling.*/
+static unsigned long long poll_timeout = 250000;
+
+/* Suspend flag */
+static int ap_suspend_flag;
+/* Flag to check if domain was set through module parameter domain=. This is
+ * important when supsend and resume is done in a z/VM environment where the
+ * domain might change. */
+static int user_set_domain = 0;
+static struct bus_type ap_bus_type;
+
+/* Adapter interrupt definitions */
+static int ap_airq_flag;
+
+static struct airq_struct ap_airq = {
+ .handler = ap_interrupt_handler,
+ .isc = AP_ISC,
+};
+
+/**
+ * ap_using_interrupts() - Returns non-zero if interrupt support is
+ * available.
+ */
+static inline int ap_using_interrupts(void)
+{
+ return ap_airq_flag;
+}
+
+/**
+ * ap_intructions_available() - Test if AP instructions are available.
+ *
+ * Returns 0 if the AP instructions are installed.
+ */
+static inline int ap_instructions_available(void)
+{
+ register unsigned long reg0 asm ("0") = AP_MKQID(0,0);
+ register unsigned long reg1 asm ("1") = -ENODEV;
+ register unsigned long reg2 asm ("2") = 0UL;
+
+ asm volatile(
+ " .long 0xb2af0000\n" /* PQAP(TAPQ) */
+ "0: la %1,0\n"
+ "1:\n"
+ EX_TABLE(0b, 1b)
+ : "+d" (reg0), "+d" (reg1), "+d" (reg2) : : "cc" );
+ return reg1;
+}
+
+/**
+ * ap_interrupts_available(): Test if AP interrupts are available.
+ *
+ * Returns 1 if AP interrupts are available.
+ */
+static int ap_interrupts_available(void)
+{
+ return test_facility(65);
+}
+
+/**
+ * ap_configuration_available(): Test if AP configuration
+ * information is available.
+ *
+ * Returns 1 if AP configuration information is available.
+ */
+static int ap_configuration_available(void)
+{
+ return test_facility(12);
+}
+
+/**
+ * ap_test_queue(): Test adjunct processor queue.
+ * @qid: The AP queue number
+ * @queue_depth: Pointer to queue depth value
+ * @device_type: Pointer to device type value
+ *
+ * Returns AP queue status structure.
+ */
+static inline struct ap_queue_status
+ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type)
+{
+ register unsigned long reg0 asm ("0") = qid;
+ register struct ap_queue_status reg1 asm ("1");
+ register unsigned long reg2 asm ("2") = 0UL;
+
+ asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */
+ : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
+ *device_type = (int) (reg2 >> 24);
+ *queue_depth = (int) (reg2 & 0xff);
+ return reg1;
+}
+
+/**
+ * ap_query_facilities(): PQAP(TAPQ) query facilities.
+ * @qid: The AP queue number
+ *
+ * Returns content of general register 2 after the PQAP(TAPQ)
+ * instruction was called.
+ */
+static inline unsigned long ap_query_facilities(ap_qid_t qid)
+{
+ register unsigned long reg0 asm ("0") = qid | 0x00800000UL;
+ register unsigned long reg1 asm ("1");
+ register unsigned long reg2 asm ("2") = 0UL;
+
+ asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */
+ : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
+ return reg2;
+}
+
+/**
+ * ap_reset_queue(): Reset adjunct processor queue.
+ * @qid: The AP queue number
+ *
+ * Returns AP queue status structure.
+ */
+static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid)
+{
+ register unsigned long reg0 asm ("0") = qid | 0x01000000UL;
+ register struct ap_queue_status reg1 asm ("1");
+ register unsigned long reg2 asm ("2") = 0UL;
+
+ asm volatile(
+ ".long 0xb2af0000" /* PQAP(RAPQ) */
+ : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
+ return reg1;
+}
+
+/**
+ * ap_queue_interruption_control(): Enable interruption for a specific AP.
+ * @qid: The AP queue number
+ * @ind: The notification indicator byte
+ *
+ * Returns AP queue status.
+ */
+static inline struct ap_queue_status
+ap_queue_interruption_control(ap_qid_t qid, void *ind)
+{
+ register unsigned long reg0 asm ("0") = qid | 0x03000000UL;
+ register unsigned long reg1_in asm ("1") = 0x0000800000000000UL | AP_ISC;
+ register struct ap_queue_status reg1_out asm ("1");
+ register void *reg2 asm ("2") = ind;
+ asm volatile(
+ ".long 0xb2af0000" /* PQAP(AQIC) */
+ : "+d" (reg0), "+d" (reg1_in), "=d" (reg1_out), "+d" (reg2)
+ :
+ : "cc" );
+ return reg1_out;
+}
+
+static inline struct ap_queue_status
+__ap_query_functions(ap_qid_t qid, unsigned int *functions)
+{
+ register unsigned long reg0 asm ("0") = 0UL | qid | (1UL << 23);
+ register struct ap_queue_status reg1 asm ("1") = AP_QUEUE_STATUS_INVALID;
+ register unsigned long reg2 asm ("2");
+
+ asm volatile(
+ ".long 0xb2af0000\n" /* PQAP(TAPQ) */
+ "0:\n"
+ EX_TABLE(0b, 0b)
+ : "+d" (reg0), "+d" (reg1), "=d" (reg2)
+ :
+ : "cc");
+
+ *functions = (unsigned int)(reg2 >> 32);
+ return reg1;
+}
+
+static inline int __ap_query_configuration(struct ap_config_info *config)
+{
+ register unsigned long reg0 asm ("0") = 0x04000000UL;
+ register unsigned long reg1 asm ("1") = -EINVAL;
+ register unsigned char *reg2 asm ("2") = (unsigned char *)config;
+
+ asm volatile(
+ ".long 0xb2af0000\n" /* PQAP(QCI) */
+ "0: la %1,0\n"
+ "1:\n"
+ EX_TABLE(0b, 1b)
+ : "+d" (reg0), "+d" (reg1), "+d" (reg2)
+ :
+ : "cc");
+
+ return reg1;
+}
+
+/**
+ * ap_query_functions(): Query supported functions.
+ * @qid: The AP queue number
+ * @functions: Pointer to functions field.
+ *
+ * Returns
+ * 0 on success.
+ * -ENODEV if queue not valid.
+ * -EBUSY if device busy.
+ * -EINVAL if query function is not supported
+ */
+static int ap_query_functions(ap_qid_t qid, unsigned int *functions)
+{
+ struct ap_queue_status status;
+ int i;
+ status = __ap_query_functions(qid, functions);
+
+ for (i = 0; i < AP_MAX_RESET; i++) {
+ if (ap_queue_status_invalid_test(&status))
+ return -ENODEV;
+
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ return 0;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ case AP_RESPONSE_BUSY:
+ break;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ case AP_RESPONSE_INVALID_ADDRESS:
+ return -ENODEV;
+ case AP_RESPONSE_OTHERWISE_CHANGED:
+ break;
+ default:
+ break;
+ }
+ if (i < AP_MAX_RESET - 1) {
+ udelay(5);
+ status = __ap_query_functions(qid, functions);
+ }
+ }
+ return -EBUSY;
+}
+
+/**
+ * ap_queue_enable_interruption(): Enable interruption on an AP.
+ * @qid: The AP queue number
+ * @ind: the notification indicator byte
+ *
+ * Enables interruption on AP queue via ap_queue_interruption_control(). Based
+ * on the return value it waits a while and tests the AP queue if interrupts
+ * have been switched on using ap_test_queue().
+ */
+static int ap_queue_enable_interruption(ap_qid_t qid, void *ind)
+{
+ struct ap_queue_status status;
+ int t_depth, t_device_type, rc, i;
+
+ rc = -EBUSY;
+ status = ap_queue_interruption_control(qid, ind);
+
+ for (i = 0; i < AP_MAX_RESET; i++) {
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (status.int_enabled)
+ return 0;
+ break;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ case AP_RESPONSE_BUSY:
+ if (i < AP_MAX_RESET - 1) {
+ udelay(5);
+ status = ap_queue_interruption_control(qid,
+ ind);
+ continue;
+ }
+ break;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ case AP_RESPONSE_INVALID_ADDRESS:
+ return -ENODEV;
+ case AP_RESPONSE_OTHERWISE_CHANGED:
+ if (status.int_enabled)
+ return 0;
+ break;
+ default:
+ break;
+ }
+ if (i < AP_MAX_RESET - 1) {
+ udelay(5);
+ status = ap_test_queue(qid, &t_depth, &t_device_type);
+ }
+ }
+ return rc;
+}
+
+/**
+ * __ap_send(): Send message to adjunct processor queue.
+ * @qid: The AP queue number
+ * @psmid: The program supplied message identifier
+ * @msg: The message text
+ * @length: The message length
+ * @special: Special Bit
+ *
+ * Returns AP queue status structure.
+ * Condition code 1 on NQAP can't happen because the L bit is 1.
+ * Condition code 2 on NQAP also means the send is incomplete,
+ * because a segment boundary was reached. The NQAP is repeated.
+ */
+static inline struct ap_queue_status
+__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
+ unsigned int special)
+{
+ typedef struct { char _[length]; } msgblock;
+ register unsigned long reg0 asm ("0") = qid | 0x40000000UL;
+ register struct ap_queue_status reg1 asm ("1");
+ register unsigned long reg2 asm ("2") = (unsigned long) msg;
+ register unsigned long reg3 asm ("3") = (unsigned long) length;
+ register unsigned long reg4 asm ("4") = (unsigned int) (psmid >> 32);
+ register unsigned long reg5 asm ("5") = psmid & 0xffffffff;
+
+ if (special == 1)
+ reg0 |= 0x400000UL;
+
+ asm volatile (
+ "0: .long 0xb2ad0042\n" /* NQAP */
+ " brc 2,0b"
+ : "+d" (reg0), "=d" (reg1), "+d" (reg2), "+d" (reg3)
+ : "d" (reg4), "d" (reg5), "m" (*(msgblock *) msg)
+ : "cc" );
+ return reg1;
+}
+
+int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
+{
+ struct ap_queue_status status;
+
+ status = __ap_send(qid, psmid, msg, length, 0);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ return 0;
+ case AP_RESPONSE_Q_FULL:
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ return -EBUSY;
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ return -EINVAL;
+ default: /* Device is gone. */
+ return -ENODEV;
+ }
+}
+EXPORT_SYMBOL(ap_send);
+
+/**
+ * __ap_recv(): Receive message from adjunct processor queue.
+ * @qid: The AP queue number
+ * @psmid: Pointer to program supplied message identifier
+ * @msg: The message text
+ * @length: The message length
+ *
+ * Returns AP queue status structure.
+ * Condition code 1 on DQAP means the receive has taken place
+ * but only partially. The response is incomplete, hence the
+ * DQAP is repeated.
+ * Condition code 2 on DQAP also means the receive is incomplete,
+ * this time because a segment boundary was reached. Again, the
+ * DQAP is repeated.
+ * Note that gpr2 is used by the DQAP instruction to keep track of
+ * any 'residual' length, in case the instruction gets interrupted.
+ * Hence it gets zeroed before the instruction.
+ */
+static inline struct ap_queue_status
+__ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
+{
+ typedef struct { char _[length]; } msgblock;
+ register unsigned long reg0 asm("0") = qid | 0x80000000UL;
+ register struct ap_queue_status reg1 asm ("1");
+ register unsigned long reg2 asm("2") = 0UL;
+ register unsigned long reg4 asm("4") = (unsigned long) msg;
+ register unsigned long reg5 asm("5") = (unsigned long) length;
+ register unsigned long reg6 asm("6") = 0UL;
+ register unsigned long reg7 asm("7") = 0UL;
+
+
+ asm volatile(
+ "0: .long 0xb2ae0064\n" /* DQAP */
+ " brc 6,0b\n"
+ : "+d" (reg0), "=d" (reg1), "+d" (reg2),
+ "+d" (reg4), "+d" (reg5), "+d" (reg6), "+d" (reg7),
+ "=m" (*(msgblock *) msg) : : "cc" );
+ *psmid = (((unsigned long long) reg6) << 32) + reg7;
+ return reg1;
+}
+
+int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
+{
+ struct ap_queue_status status;
+
+ status = __ap_recv(qid, psmid, msg, length);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ return 0;
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (status.queue_empty)
+ return -ENOENT;
+ return -EBUSY;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ return -EBUSY;
+ default:
+ return -ENODEV;
+ }
+}
+EXPORT_SYMBOL(ap_recv);
+
+/**
+ * ap_query_queue(): Check if an AP queue is available.
+ * @qid: The AP queue number
+ * @queue_depth: Pointer to queue depth value
+ * @device_type: Pointer to device type value
+ *
+ * The test is repeated for AP_MAX_RESET times.
+ */
+static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type)
+{
+ struct ap_queue_status status;
+ int t_depth, t_device_type, rc, i;
+
+ rc = -EBUSY;
+ for (i = 0; i < AP_MAX_RESET; i++) {
+ status = ap_test_queue(qid, &t_depth, &t_device_type);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ *queue_depth = t_depth + 1;
+ *device_type = t_device_type;
+ rc = 0;
+ break;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ rc = -ENODEV;
+ break;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ break;
+ case AP_RESPONSE_DECONFIGURED:
+ rc = -ENODEV;
+ break;
+ case AP_RESPONSE_CHECKSTOPPED:
+ rc = -ENODEV;
+ break;
+ case AP_RESPONSE_INVALID_ADDRESS:
+ rc = -ENODEV;
+ break;
+ case AP_RESPONSE_OTHERWISE_CHANGED:
+ break;
+ case AP_RESPONSE_BUSY:
+ break;
+ default:
+ BUG();
+ }
+ if (rc != -EBUSY)
+ break;
+ if (i < AP_MAX_RESET - 1)
+ udelay(5);
+ }
+ return rc;
+}
+
+/**
+ * ap_init_queue(): Reset an AP queue.
+ * @qid: The AP queue number
+ *
+ * Reset an AP queue and wait for it to become available again.
+ */
+static int ap_init_queue(ap_qid_t qid)
+{
+ struct ap_queue_status status;
+ int rc, dummy, i;
+
+ rc = -ENODEV;
+ status = ap_reset_queue(qid);
+ for (i = 0; i < AP_MAX_RESET; i++) {
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ if (status.queue_empty)
+ rc = 0;
+ break;
+ case AP_RESPONSE_Q_NOT_AVAIL:
+ case AP_RESPONSE_DECONFIGURED:
+ case AP_RESPONSE_CHECKSTOPPED:
+ i = AP_MAX_RESET; /* return with -ENODEV */
+ break;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ rc = -EBUSY;
+ case AP_RESPONSE_BUSY:
+ default:
+ break;
+ }
+ if (rc != -ENODEV && rc != -EBUSY)
+ break;
+ if (i < AP_MAX_RESET - 1) {
+ /* Time we are waiting until we give up (0.7sec * 90).
+ * Since the actual request (in progress) will not
+ * interrupted immediately for the reset command,
+ * we have to be patient. In worst case we have to
+ * wait 60sec + reset time (some msec).
+ */
+ schedule_timeout(AP_RESET_TIMEOUT);
+ status = ap_test_queue(qid, &dummy, &dummy);
+ }
+ }
+ if (rc == 0 && ap_using_interrupts()) {
+ rc = ap_queue_enable_interruption(qid, ap_airq.lsi_ptr);
+ /* If interruption mode is supported by the machine,
+ * but an AP can not be enabled for interruption then
+ * the AP will be discarded. */
+ if (rc)
+ pr_err("Registering adapter interrupts for "
+ "AP %d failed\n", AP_QID_DEVICE(qid));
+ }
+ return rc;
+}
+
+/**
+ * ap_increase_queue_count(): Arm request timeout.
+ * @ap_dev: Pointer to an AP device.
+ *
+ * Arm request timeout if an AP device was idle and a new request is submitted.
+ */
+static void ap_increase_queue_count(struct ap_device *ap_dev)
+{
+ int timeout = ap_dev->drv->request_timeout;
+
+ ap_dev->queue_count++;
+ if (ap_dev->queue_count == 1) {
+ mod_timer(&ap_dev->timeout, jiffies + timeout);
+ ap_dev->reset = AP_RESET_ARMED;
+ }
+}
+
+/**
+ * ap_decrease_queue_count(): Decrease queue count.
+ * @ap_dev: Pointer to an AP device.
+ *
+ * If AP device is still alive, re-schedule request timeout if there are still
+ * pending requests.
+ */
+static void ap_decrease_queue_count(struct ap_device *ap_dev)
+{
+ int timeout = ap_dev->drv->request_timeout;
+
+ ap_dev->queue_count--;
+ if (ap_dev->queue_count > 0)
+ mod_timer(&ap_dev->timeout, jiffies + timeout);
+ else
+ /*
+ * The timeout timer should to be disabled now - since
+ * del_timer_sync() is very expensive, we just tell via the
+ * reset flag to ignore the pending timeout timer.
+ */
+ ap_dev->reset = AP_RESET_IGNORE;
+}
+
+/*
+ * AP device related attributes.
+ */
+static ssize_t ap_hwtype_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->device_type);
+}
+
+static DEVICE_ATTR(hwtype, 0444, ap_hwtype_show, NULL);
+
+static ssize_t ap_raw_hwtype_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->raw_hwtype);
+}
+
+static DEVICE_ATTR(raw_hwtype, 0444, ap_raw_hwtype_show, NULL);
+
+static ssize_t ap_depth_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->queue_depth);
+}
+
+static DEVICE_ATTR(depth, 0444, ap_depth_show, NULL);
+static ssize_t ap_request_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ int rc;
+
+ spin_lock_bh(&ap_dev->lock);
+ rc = snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->total_request_count);
+ spin_unlock_bh(&ap_dev->lock);
+ return rc;
+}
+
+static DEVICE_ATTR(request_count, 0444, ap_request_count_show, NULL);
+
+static ssize_t ap_requestq_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ int rc;
+
+ spin_lock_bh(&ap_dev->lock);
+ rc = snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->requestq_count);
+ spin_unlock_bh(&ap_dev->lock);
+ return rc;
+}
+
+static DEVICE_ATTR(requestq_count, 0444, ap_requestq_count_show, NULL);
+
+static ssize_t ap_pendingq_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ int rc;
+
+ spin_lock_bh(&ap_dev->lock);
+ rc = snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->pendingq_count);
+ spin_unlock_bh(&ap_dev->lock);
+ return rc;
+}
+
+static DEVICE_ATTR(pendingq_count, 0444, ap_pendingq_count_show, NULL);
+
+static ssize_t ap_modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "ap:t%02X", to_ap_dev(dev)->device_type);
+}
+
+static DEVICE_ATTR(modalias, 0444, ap_modalias_show, NULL);
+
+static ssize_t ap_functions_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ return snprintf(buf, PAGE_SIZE, "0x%08X\n", ap_dev->functions);
+}
+
+static DEVICE_ATTR(ap_functions, 0444, ap_functions_show, NULL);
+
+static struct attribute *ap_dev_attrs[] = {
+ &dev_attr_hwtype.attr,
+ &dev_attr_raw_hwtype.attr,
+ &dev_attr_depth.attr,
+ &dev_attr_request_count.attr,
+ &dev_attr_requestq_count.attr,
+ &dev_attr_pendingq_count.attr,
+ &dev_attr_modalias.attr,
+ &dev_attr_ap_functions.attr,
+ NULL
+};
+static struct attribute_group ap_dev_attr_group = {
+ .attrs = ap_dev_attrs
+};
+
+/**
+ * ap_bus_match()
+ * @dev: Pointer to device
+ * @drv: Pointer to device_driver
+ *
+ * AP bus driver registration/unregistration.
+ */
+static int ap_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ struct ap_driver *ap_drv = to_ap_drv(drv);
+ struct ap_device_id *id;
+
+ /*
+ * Compare device type of the device with the list of
+ * supported types of the device_driver.
+ */
+ for (id = ap_drv->ids; id->match_flags; id++) {
+ if ((id->match_flags & AP_DEVICE_ID_MATCH_DEVICE_TYPE) &&
+ (id->dev_type != ap_dev->device_type))
+ continue;
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * ap_uevent(): Uevent function for AP devices.
+ * @dev: Pointer to device
+ * @env: Pointer to kobj_uevent_env
+ *
+ * It sets up a single environment variable DEV_TYPE which contains the
+ * hardware device type.
+ */
+static int ap_uevent (struct device *dev, struct kobj_uevent_env *env)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ int retval = 0;
+
+ if (!ap_dev)
+ return -ENODEV;
+
+ /* Set up DEV_TYPE environment variable. */
+ retval = add_uevent_var(env, "DEV_TYPE=%04X", ap_dev->device_type);
+ if (retval)
+ return retval;
+
+ /* Add MODALIAS= */
+ retval = add_uevent_var(env, "MODALIAS=ap:t%02X", ap_dev->device_type);
+
+ return retval;
+}
+
+static int ap_bus_suspend(struct device *dev, pm_message_t state)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ unsigned long flags;
+
+ if (!ap_suspend_flag) {
+ ap_suspend_flag = 1;
+
+ /* Disable scanning for devices, thus we do not want to scan
+ * for them after removing.
+ */
+ del_timer_sync(&ap_config_timer);
+ if (ap_work_queue != NULL) {
+ destroy_workqueue(ap_work_queue);
+ ap_work_queue = NULL;
+ }
+
+ tasklet_disable(&ap_tasklet);
+ }
+ /* Poll on the device until all requests are finished. */
+ do {
+ flags = 0;
+ spin_lock_bh(&ap_dev->lock);
+ __ap_poll_device(ap_dev, &flags);
+ spin_unlock_bh(&ap_dev->lock);
+ } while ((flags & 1) || (flags & 2));
+
+ spin_lock_bh(&ap_dev->lock);
+ ap_dev->unregistered = 1;
+ spin_unlock_bh(&ap_dev->lock);
+
+ return 0;
+}
+
+static int ap_bus_resume(struct device *dev)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ int rc;
+
+ if (ap_suspend_flag) {
+ ap_suspend_flag = 0;
+ if (ap_interrupts_available()) {
+ if (!ap_using_interrupts()) {
+ rc = register_adapter_interrupt(&ap_airq);
+ ap_airq_flag = (rc == 0);
+ }
+ } else {
+ if (ap_using_interrupts()) {
+ unregister_adapter_interrupt(&ap_airq);
+ ap_airq_flag = 0;
+ }
+ }
+ ap_query_configuration();
+ if (!user_set_domain) {
+ ap_domain_index = -1;
+ ap_select_domain();
+ }
+ init_timer(&ap_config_timer);
+ ap_config_timer.function = ap_config_timeout;
+ ap_config_timer.data = 0;
+ ap_config_timer.expires = jiffies + ap_config_time * HZ;
+ add_timer(&ap_config_timer);
+ ap_work_queue = create_singlethread_workqueue("kapwork");
+ if (!ap_work_queue)
+ return -ENOMEM;
+ tasklet_enable(&ap_tasklet);
+ if (!ap_using_interrupts())
+ ap_schedule_poll_timer();
+ else
+ tasklet_schedule(&ap_tasklet);
+ if (ap_thread_flag)
+ rc = ap_poll_thread_start();
+ else
+ rc = 0;
+ } else
+ rc = 0;
+ if (AP_QID_QUEUE(ap_dev->qid) != ap_domain_index) {
+ spin_lock_bh(&ap_dev->lock);
+ ap_dev->qid = AP_MKQID(AP_QID_DEVICE(ap_dev->qid),
+ ap_domain_index);
+ spin_unlock_bh(&ap_dev->lock);
+ }
+ queue_work(ap_work_queue, &ap_config_work);
+
+ return rc;
+}
+
+static struct bus_type ap_bus_type = {
+ .name = "ap",
+ .match = &ap_bus_match,
+ .uevent = &ap_uevent,
+ .suspend = ap_bus_suspend,
+ .resume = ap_bus_resume
+};
+
+static int ap_device_probe(struct device *dev)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ struct ap_driver *ap_drv = to_ap_drv(dev->driver);
+ int rc;
+
+ ap_dev->drv = ap_drv;
+
+ spin_lock_bh(&ap_device_list_lock);
+ list_add(&ap_dev->list, &ap_device_list);
+ spin_unlock_bh(&ap_device_list_lock);
+
+ rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
+ if (rc) {
+ spin_lock_bh(&ap_device_list_lock);
+ list_del_init(&ap_dev->list);
+ spin_unlock_bh(&ap_device_list_lock);
+ }
+ return rc;
+}
+
+/**
+ * __ap_flush_queue(): Flush requests.
+ * @ap_dev: Pointer to the AP device
+ *
+ * Flush all requests from the request/pending queue of an AP device.
+ */
+static void __ap_flush_queue(struct ap_device *ap_dev)
+{
+ struct ap_message *ap_msg, *next;
+
+ list_for_each_entry_safe(ap_msg, next, &ap_dev->pendingq, list) {
+ list_del_init(&ap_msg->list);
+ ap_dev->pendingq_count--;
+ ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ }
+ list_for_each_entry_safe(ap_msg, next, &ap_dev->requestq, list) {
+ list_del_init(&ap_msg->list);
+ ap_dev->requestq_count--;
+ ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ }
+}
+
+void ap_flush_queue(struct ap_device *ap_dev)
+{
+ spin_lock_bh(&ap_dev->lock);
+ __ap_flush_queue(ap_dev);
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_flush_queue);
+
+static int ap_device_remove(struct device *dev)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+ struct ap_driver *ap_drv = ap_dev->drv;
+
+ ap_flush_queue(ap_dev);
+ del_timer_sync(&ap_dev->timeout);
+ spin_lock_bh(&ap_device_list_lock);
+ list_del_init(&ap_dev->list);
+ spin_unlock_bh(&ap_device_list_lock);
+ if (ap_drv->remove)
+ ap_drv->remove(ap_dev);
+ spin_lock_bh(&ap_dev->lock);
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ spin_unlock_bh(&ap_dev->lock);
+ return 0;
+}
+
+int ap_driver_register(struct ap_driver *ap_drv, struct module *owner,
+ char *name)
+{
+ struct device_driver *drv = &ap_drv->driver;
+
+ drv->bus = &ap_bus_type;
+ drv->probe = ap_device_probe;
+ drv->remove = ap_device_remove;
+ drv->owner = owner;
+ drv->name = name;
+ return driver_register(drv);
+}
+EXPORT_SYMBOL(ap_driver_register);
+
+void ap_driver_unregister(struct ap_driver *ap_drv)
+{
+ driver_unregister(&ap_drv->driver);
+}
+EXPORT_SYMBOL(ap_driver_unregister);
+
+void ap_bus_force_rescan(void)
+{
+ /* reconfigure the AP bus rescan timer. */
+ mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
+ /* processing a asynchronous bus rescan */
+ queue_work(ap_work_queue, &ap_config_work);
+ flush_work(&ap_config_work);
+}
+EXPORT_SYMBOL(ap_bus_force_rescan);
+
+/*
+ * ap_test_config(): helper function to extract the nrth bit
+ * within the unsigned int array field.
+ */
+static inline int ap_test_config(unsigned int *field, unsigned int nr)
+{
+ if (nr > 0xFFu)
+ return 0;
+ return ap_test_bit((field + (nr >> 5)), (nr & 0x1f));
+}
+
+/*
+ * ap_test_config_card_id(): Test, whether an AP card ID is configured.
+ * @id AP card ID
+ *
+ * Returns 0 if the card is not configured
+ * 1 if the card is configured or
+ * if the configuration information is not available
+ */
+static inline int ap_test_config_card_id(unsigned int id)
+{
+ if (!ap_configuration)
+ return 1;
+ return ap_test_config(ap_configuration->apm, id);
+}
+
+/*
+ * ap_test_config_domain(): Test, whether an AP usage domain is configured.
+ * @domain AP usage domain ID
+ *
+ * Returns 0 if the usage domain is not configured
+ * 1 if the usage domain is configured or
+ * if the configuration information is not available
+ */
+static inline int ap_test_config_domain(unsigned int domain)
+{
+ if (!ap_configuration) /* QCI not supported */
+ if (domain < 16)
+ return 1; /* then domains 0...15 are configured */
+ else
+ return 0;
+ else
+ return ap_test_config(ap_configuration->aqm, domain);
+}
+
+/*
+ * AP bus attributes.
+ */
+static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
+}
+
+static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);
+
+static ssize_t ap_control_domain_mask_show(struct bus_type *bus, char *buf)
+{
+ if (ap_configuration != NULL) { /* QCI not supported */
+ if (test_facility(76)) { /* format 1 - 256 bit domain field */
+ return snprintf(buf, PAGE_SIZE,
+ "0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+ ap_configuration->adm[0], ap_configuration->adm[1],
+ ap_configuration->adm[2], ap_configuration->adm[3],
+ ap_configuration->adm[4], ap_configuration->adm[5],
+ ap_configuration->adm[6], ap_configuration->adm[7]);
+ } else { /* format 0 - 16 bit domain field */
+ return snprintf(buf, PAGE_SIZE, "%08x%08x\n",
+ ap_configuration->adm[0], ap_configuration->adm[1]);
+ }
+ } else {
+ return snprintf(buf, PAGE_SIZE, "not supported\n");
+ }
+}
+
+static BUS_ATTR(ap_control_domain_mask, 0444,
+ ap_control_domain_mask_show, NULL);
+
+static ssize_t ap_config_time_show(struct bus_type *bus, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
+}
+
+static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ ap_using_interrupts() ? 1 : 0);
+}
+
+static BUS_ATTR(ap_interrupts, 0444, ap_interrupts_show, NULL);
+
+static ssize_t ap_config_time_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ int time;
+
+ if (sscanf(buf, "%d\n", &time) != 1 || time < 5 || time > 120)
+ return -EINVAL;
+ ap_config_time = time;
+ if (!timer_pending(&ap_config_timer) ||
+ !mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ)) {
+ ap_config_timer.expires = jiffies + ap_config_time * HZ;
+ add_timer(&ap_config_timer);
+ }
+ return count;
+}
+
+static BUS_ATTR(config_time, 0644, ap_config_time_show, ap_config_time_store);
+
+static ssize_t ap_poll_thread_show(struct bus_type *bus, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ap_poll_kthread ? 1 : 0);
+}
+
+static ssize_t ap_poll_thread_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ int flag, rc;
+
+ if (sscanf(buf, "%d\n", &flag) != 1)
+ return -EINVAL;
+ if (flag) {
+ rc = ap_poll_thread_start();
+ if (rc)
+ return rc;
+ }
+ else
+ ap_poll_thread_stop();
+ return count;
+}
+
+static BUS_ATTR(poll_thread, 0644, ap_poll_thread_show, ap_poll_thread_store);
+
+static ssize_t poll_timeout_show(struct bus_type *bus, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%llu\n", poll_timeout);
+}
+
+static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf,
+ size_t count)
+{
+ unsigned long long time;
+ ktime_t hr_time;
+
+ /* 120 seconds = maximum poll interval */
+ if (sscanf(buf, "%llu\n", &time) != 1 || time < 1 ||
+ time > 120000000000ULL)
+ return -EINVAL;
+ poll_timeout = time;
+ hr_time = ktime_set(0, poll_timeout);
+
+ spin_lock_bh(&ap_poll_timer_lock);
+ hrtimer_cancel(&ap_poll_timer);
+ hrtimer_set_expires(&ap_poll_timer, hr_time);
+ hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
+ spin_unlock_bh(&ap_poll_timer_lock);
+
+ return count;
+}
+
+static BUS_ATTR(poll_timeout, 0644, poll_timeout_show, poll_timeout_store);
+
+static ssize_t ap_max_domain_id_show(struct bus_type *bus, char *buf)
+{
+ ap_qid_t qid;
+ int i, nd, max_domain_id = -1;
+ unsigned long fbits;
+
+ if (ap_configuration) {
+ if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS) {
+ for (i = 0; i < AP_DEVICES; i++) {
+ if (!ap_test_config_card_id(i))
+ continue;
+ qid = AP_MKQID(i, ap_domain_index);
+ fbits = ap_query_facilities(qid);
+ if (fbits & (1UL << 57)) {
+ /* the N bit is 0, Nd field is filled */
+ nd = (int)((fbits & 0x00FF0000UL)>>16);
+ if (nd > 0)
+ max_domain_id = nd;
+ else
+ max_domain_id = 15;
+ } else {
+ /* N bit is 1, max 16 domains */
+ max_domain_id = 15;
+ }
+ break;
+ }
+ }
+ } else {
+ /* no APXA support, older machines with max 16 domains */
+ max_domain_id = 15;
+ }
+ return snprintf(buf, PAGE_SIZE, "%d\n", max_domain_id);
+}
+
+static BUS_ATTR(ap_max_domain_id, 0444, ap_max_domain_id_show, NULL);
+
+static struct bus_attribute *const ap_bus_attrs[] = {
+ &bus_attr_ap_domain,
+ &bus_attr_ap_control_domain_mask,
+ &bus_attr_config_time,
+ &bus_attr_poll_thread,
+ &bus_attr_ap_interrupts,
+ &bus_attr_poll_timeout,
+ &bus_attr_ap_max_domain_id,
+ NULL,
+};
+
+/**
+ * ap_query_configuration(): Query AP configuration information.
+ *
+ * Query information of installed cards and configured domains from AP.
+ */
+static void ap_query_configuration(void)
+{
+ if (ap_configuration_available()) {
+ if (!ap_configuration)
+ ap_configuration =
+ kzalloc(sizeof(struct ap_config_info),
+ GFP_KERNEL);
+ if (ap_configuration)
+ __ap_query_configuration(ap_configuration);
+ } else
+ ap_configuration = NULL;
+}
+
+/**
+ * ap_select_domain(): Select an AP domain.
+ *
+ * Pick one of the 16 AP domains.
+ */
+static int ap_select_domain(void)
+{
+ int queue_depth, device_type, count, max_count, best_domain;
+ ap_qid_t qid;
+ int rc, i, j;
+
+ /* IF APXA isn't installed, only 16 domains could be defined */
+ if (!ap_configuration->ap_extended && (ap_domain_index > 15))
+ return -EINVAL;
+
+ /*
+ * We want to use a single domain. Either the one specified with
+ * the "domain=" parameter or the domain with the maximum number
+ * of devices.
+ */
+ if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS)
+ /* Domain has already been selected. */
+ return 0;
+ best_domain = -1;
+ max_count = 0;
+ for (i = 0; i < AP_DOMAINS; i++) {
+ if (!ap_test_config_domain(i))
+ continue;
+ count = 0;
+ for (j = 0; j < AP_DEVICES; j++) {
+ if (!ap_test_config_card_id(j))
+ continue;
+ qid = AP_MKQID(j, i);
+ rc = ap_query_queue(qid, &queue_depth, &device_type);
+ if (rc)
+ continue;
+ count++;
+ }
+ if (count > max_count) {
+ max_count = count;
+ best_domain = i;
+ }
+ }
+ if (best_domain >= 0){
+ ap_domain_index = best_domain;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+/**
+ * ap_probe_device_type(): Find the device type of an AP.
+ * @ap_dev: pointer to the AP device.
+ *
+ * Find the device type if query queue returned a device type of 0.
+ */
+static int ap_probe_device_type(struct ap_device *ap_dev)
+{
+ static unsigned char msg[] = {
+ 0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x01,0x00,0x43,0x43,0x41,0x2d,0x41,0x50,
+ 0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,
+ 0x00,0x00,0x00,0x00,0x50,0x4b,0x00,0x00,
+ 0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x54,0x32,0x01,0x00,0xa0,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0xb8,0x05,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,
+ 0x49,0x43,0x53,0x46,0x20,0x20,0x20,0x20,
+ 0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,
+ 0x2d,0x31,0x2e,0x32,0x37,0x00,0x11,0x22,
+ 0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
+ 0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,
+ 0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,
+ 0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,
+ 0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,
+ 0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
+ 0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,
+ 0x88,0x1e,0x00,0x00,0x57,0x00,0x00,0x00,
+ 0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,
+ 0x03,0x02,0x00,0x00,0x40,0x01,0x00,0x01,
+ 0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,
+ 0xf6,0xd2,0x7b,0x58,0x4b,0xf9,0x28,0x68,
+ 0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,
+ 0x63,0x42,0xef,0xf8,0xfd,0xa4,0xf8,0xb0,
+ 0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,
+ 0x53,0x8c,0x6f,0x4e,0x72,0x8f,0x6c,0x04,
+ 0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,
+ 0xf7,0xdd,0xfd,0x4f,0x11,0x36,0x95,0x5d,
+ };
+ struct ap_queue_status status;
+ unsigned long long psmid;
+ char *reply;
+ int rc, i;
+
+ reply = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!reply) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ status = __ap_send(ap_dev->qid, 0x0102030405060708ULL,
+ msg, sizeof(msg), 0);
+ if (status.response_code != AP_RESPONSE_NORMAL) {
+ rc = -ENODEV;
+ goto out_free;
+ }
+
+ /* Wait for the test message to complete. */
+ for (i = 0; i < 6; i++) {
+ mdelay(300);
+ status = __ap_recv(ap_dev->qid, &psmid, reply, 4096);
+ if (status.response_code == AP_RESPONSE_NORMAL &&
+ psmid == 0x0102030405060708ULL)
+ break;
+ }
+ if (i < 6) {
+ /* Got an answer. */
+ if (reply[0] == 0x00 && reply[1] == 0x86)
+ ap_dev->device_type = AP_DEVICE_TYPE_PCICC;
+ else
+ ap_dev->device_type = AP_DEVICE_TYPE_PCICA;
+ rc = 0;
+ } else
+ rc = -ENODEV;
+
+out_free:
+ free_page((unsigned long) reply);
+out:
+ return rc;
+}
+
+static void ap_interrupt_handler(struct airq_struct *airq)
+{
+ inc_irq_stat(IRQIO_APB);
+ tasklet_schedule(&ap_tasklet);
+}
+
+/**
+ * __ap_scan_bus(): Scan the AP bus.
+ * @dev: Pointer to device
+ * @data: Pointer to data
+ *
+ * Scan the AP bus for new devices.
+ */
+static int __ap_scan_bus(struct device *dev, void *data)
+{
+ return to_ap_dev(dev)->qid == (ap_qid_t)(unsigned long) data;
+}
+
+static void ap_device_release(struct device *dev)
+{
+ struct ap_device *ap_dev = to_ap_dev(dev);
+
+ kfree(ap_dev);
+}
+
+static void ap_scan_bus(struct work_struct *unused)
+{
+ struct ap_device *ap_dev;
+ struct device *dev;
+ ap_qid_t qid;
+ int queue_depth, device_type;
+ unsigned int device_functions;
+ int rc, i;
+
+ ap_query_configuration();
+ if (ap_select_domain() != 0) {
+ return;
+ }
+ for (i = 0; i < AP_DEVICES; i++) {
+ qid = AP_MKQID(i, ap_domain_index);
+ dev = bus_find_device(&ap_bus_type, NULL,
+ (void *)(unsigned long)qid,
+ __ap_scan_bus);
+ if (ap_test_config_card_id(i))
+ rc = ap_query_queue(qid, &queue_depth, &device_type);
+ else
+ rc = -ENODEV;
+ if (dev) {
+ if (rc == -EBUSY) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(AP_RESET_TIMEOUT);
+ rc = ap_query_queue(qid, &queue_depth,
+ &device_type);
+ }
+ ap_dev = to_ap_dev(dev);
+ spin_lock_bh(&ap_dev->lock);
+ if (rc || ap_dev->unregistered) {
+ spin_unlock_bh(&ap_dev->lock);
+ if (ap_dev->unregistered)
+ i--;
+ device_unregister(dev);
+ put_device(dev);
+ continue;
+ }
+ spin_unlock_bh(&ap_dev->lock);
+ put_device(dev);
+ continue;
+ }
+ if (rc)
+ continue;
+ rc = ap_init_queue(qid);
+ if (rc)
+ continue;
+ ap_dev = kzalloc(sizeof(*ap_dev), GFP_KERNEL);
+ if (!ap_dev)
+ break;
+ ap_dev->qid = qid;
+ ap_dev->queue_depth = queue_depth;
+ ap_dev->unregistered = 1;
+ spin_lock_init(&ap_dev->lock);
+ INIT_LIST_HEAD(&ap_dev->pendingq);
+ INIT_LIST_HEAD(&ap_dev->requestq);
+ INIT_LIST_HEAD(&ap_dev->list);
+ setup_timer(&ap_dev->timeout, ap_request_timeout,
+ (unsigned long) ap_dev);
+ switch (device_type) {
+ case 0:
+ /* device type probing for old cards */
+ if (ap_probe_device_type(ap_dev)) {
+ kfree(ap_dev);
+ continue;
+ }
+ break;
+ default:
+ ap_dev->device_type = device_type;
+ }
+ ap_dev->raw_hwtype = device_type;
+
+ rc = ap_query_functions(qid, &device_functions);
+ if (!rc)
+ ap_dev->functions = device_functions;
+ else
+ ap_dev->functions = 0u;
+
+ ap_dev->device.bus = &ap_bus_type;
+ ap_dev->device.parent = ap_root_device;
+ if (dev_set_name(&ap_dev->device, "card%02x",
+ AP_QID_DEVICE(ap_dev->qid))) {
+ kfree(ap_dev);
+ continue;
+ }
+ ap_dev->device.release = ap_device_release;
+ rc = device_register(&ap_dev->device);
+ if (rc) {
+ put_device(&ap_dev->device);
+ continue;
+ }
+ /* Add device attributes. */
+ rc = sysfs_create_group(&ap_dev->device.kobj,
+ &ap_dev_attr_group);
+ if (!rc) {
+ spin_lock_bh(&ap_dev->lock);
+ ap_dev->unregistered = 0;
+ spin_unlock_bh(&ap_dev->lock);
+ }
+ else
+ device_unregister(&ap_dev->device);
+ }
+}
+
+static void
+ap_config_timeout(unsigned long ptr)
+{
+ queue_work(ap_work_queue, &ap_config_work);
+ ap_config_timer.expires = jiffies + ap_config_time * HZ;
+ add_timer(&ap_config_timer);
+}
+
+/**
+ * __ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void __ap_schedule_poll_timer(void)
+{
+ ktime_t hr_time;
+
+ spin_lock_bh(&ap_poll_timer_lock);
+ if (!hrtimer_is_queued(&ap_poll_timer) && !ap_suspend_flag) {
+ hr_time = ktime_set(0, poll_timeout);
+ hrtimer_forward_now(&ap_poll_timer, hr_time);
+ hrtimer_restart(&ap_poll_timer);
+ }
+ spin_unlock_bh(&ap_poll_timer_lock);
+}
+
+/**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+ if (ap_using_interrupts())
+ return;
+ __ap_schedule_poll_timer();
+}
+
+/**
+ * ap_poll_read(): Receive pending reply messages from an AP device.
+ * @ap_dev: pointer to the AP device
+ * @flags: pointer to control flags, bit 2^0 is set if another poll is
+ * required, bit 2^1 is set if the poll timer needs to get armed
+ *
+ * Returns 0 if the device is still present, -ENODEV if not.
+ */
+static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
+{
+ struct ap_queue_status status;
+ struct ap_message *ap_msg;
+
+ if (ap_dev->queue_count <= 0)
+ return 0;
+ status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
+ ap_dev->reply->message, ap_dev->reply->length);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ atomic_dec(&ap_poll_requests);
+ ap_decrease_queue_count(ap_dev);
+ list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
+ if (ap_msg->psmid != ap_dev->reply->psmid)
+ continue;
+ list_del_init(&ap_msg->list);
+ ap_dev->pendingq_count--;
+ ap_msg->receive(ap_dev, ap_msg, ap_dev->reply);
+ break;
+ }
+ if (ap_dev->queue_count > 0)
+ *flags |= 1;
+ break;
+ case AP_RESPONSE_NO_PENDING_REPLY:
+ if (status.queue_empty) {
+ /* The card shouldn't forget requests but who knows. */
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ ap_dev->queue_count = 0;
+ list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
+ ap_dev->requestq_count += ap_dev->pendingq_count;
+ ap_dev->pendingq_count = 0;
+ } else
+ *flags |= 2;
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * ap_poll_write(): Send messages from the request queue to an AP device.
+ * @ap_dev: pointer to the AP device
+ * @flags: pointer to control flags, bit 2^0 is set if another poll is
+ * required, bit 2^1 is set if the poll timer needs to get armed
+ *
+ * Returns 0 if the device is still present, -ENODEV if not.
+ */
+static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
+{
+ struct ap_queue_status status;
+ struct ap_message *ap_msg;
+
+ if (ap_dev->requestq_count <= 0 ||
+ ap_dev->queue_count >= ap_dev->queue_depth)
+ return 0;
+ /* Start the next request on the queue. */
+ ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
+ status = __ap_send(ap_dev->qid, ap_msg->psmid,
+ ap_msg->message, ap_msg->length, ap_msg->special);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ atomic_inc(&ap_poll_requests);
+ ap_increase_queue_count(ap_dev);
+ list_move_tail(&ap_msg->list, &ap_dev->pendingq);
+ ap_dev->requestq_count--;
+ ap_dev->pendingq_count++;
+ if (ap_dev->queue_count < ap_dev->queue_depth &&
+ ap_dev->requestq_count > 0)
+ *flags |= 1;
+ *flags |= 2;
+ break;
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ __ap_schedule_poll_timer();
+ case AP_RESPONSE_Q_FULL:
+ *flags |= 2;
+ break;
+ case AP_RESPONSE_MESSAGE_TOO_BIG:
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ return -EINVAL;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * ap_poll_queue(): Poll AP device for pending replies and send new messages.
+ * @ap_dev: pointer to the bus device
+ * @flags: pointer to control flags, bit 2^0 is set if another poll is
+ * required, bit 2^1 is set if the poll timer needs to get armed
+ *
+ * Poll AP device for pending replies and send new messages. If either
+ * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
+ * Returns 0.
+ */
+static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
+{
+ int rc;
+
+ rc = ap_poll_read(ap_dev, flags);
+ if (rc)
+ return rc;
+ return ap_poll_write(ap_dev, flags);
+}
+
+/**
+ * __ap_queue_message(): Queue a message to a device.
+ * @ap_dev: pointer to the AP device
+ * @ap_msg: the message to be queued
+ *
+ * Queue a message to a device. Returns 0 if successful.
+ */
+static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ struct ap_queue_status status;
+
+ if (list_empty(&ap_dev->requestq) &&
+ ap_dev->queue_count < ap_dev->queue_depth) {
+ status = __ap_send(ap_dev->qid, ap_msg->psmid,
+ ap_msg->message, ap_msg->length,
+ ap_msg->special);
+ switch (status.response_code) {
+ case AP_RESPONSE_NORMAL:
+ list_add_tail(&ap_msg->list, &ap_dev->pendingq);
+ atomic_inc(&ap_poll_requests);
+ ap_dev->pendingq_count++;
+ ap_increase_queue_count(ap_dev);
+ ap_dev->total_request_count++;
+ break;
+ case AP_RESPONSE_Q_FULL:
+ case AP_RESPONSE_RESET_IN_PROGRESS:
+ list_add_tail(&ap_msg->list, &ap_dev->requestq);
+ ap_dev->requestq_count++;
+ ap_dev->total_request_count++;
+ return -EBUSY;
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ case AP_RESPONSE_MESSAGE_TOO_BIG:
+ ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-EINVAL));
+ return -EINVAL;
+ default: /* Device is gone. */
+ ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ return -ENODEV;
+ }
+ } else {
+ list_add_tail(&ap_msg->list, &ap_dev->requestq);
+ ap_dev->requestq_count++;
+ ap_dev->total_request_count++;
+ return -EBUSY;
+ }
+ ap_schedule_poll_timer();
+ return 0;
+}
+
+void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ unsigned long flags;
+ int rc;
+
+ /* For asynchronous message handling a valid receive-callback
+ * is required. */
+ BUG_ON(!ap_msg->receive);
+
+ spin_lock_bh(&ap_dev->lock);
+ if (!ap_dev->unregistered) {
+ /* Make room on the queue by polling for finished requests. */
+ rc = ap_poll_queue(ap_dev, &flags);
+ if (!rc)
+ rc = __ap_queue_message(ap_dev, ap_msg);
+ if (!rc)
+ wake_up(&ap_poll_wait);
+ if (rc == -ENODEV)
+ ap_dev->unregistered = 1;
+ } else {
+ ap_msg->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
+ rc = -ENODEV;
+ }
+ spin_unlock_bh(&ap_dev->lock);
+ if (rc == -ENODEV)
+ device_unregister(&ap_dev->device);
+}
+EXPORT_SYMBOL(ap_queue_message);
+
+/**
+ * ap_cancel_message(): Cancel a crypto request.
+ * @ap_dev: The AP device that has the message queued
+ * @ap_msg: The message that is to be removed
+ *
+ * Cancel a crypto request. This is done by removing the request
+ * from the device pending or request queue. Note that the
+ * request stays on the AP queue. When it finishes the message
+ * reply will be discarded because the psmid can't be found.
+ */
+void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
+{
+ struct ap_message *tmp;
+
+ spin_lock_bh(&ap_dev->lock);
+ if (!list_empty(&ap_msg->list)) {
+ list_for_each_entry(tmp, &ap_dev->pendingq, list)
+ if (tmp->psmid == ap_msg->psmid) {
+ ap_dev->pendingq_count--;
+ goto found;
+ }
+ ap_dev->requestq_count--;
+ found:
+ list_del_init(&ap_msg->list);
+ }
+ spin_unlock_bh(&ap_dev->lock);
+}
+EXPORT_SYMBOL(ap_cancel_message);
+
+/**
+ * ap_poll_timeout(): AP receive polling for finished AP requests.
+ * @unused: Unused pointer.
+ *
+ * Schedules the AP tasklet using a high resolution timer.
+ */
+static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
+{
+ tasklet_schedule(&ap_tasklet);
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ap_reset(): Reset a not responding AP device.
+ * @ap_dev: Pointer to the AP device
+ *
+ * Reset a not responding AP device and move all requests from the
+ * pending queue to the request queue.
+ */
+static void ap_reset(struct ap_device *ap_dev)
+{
+ int rc;
+
+ ap_dev->reset = AP_RESET_IGNORE;
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ ap_dev->queue_count = 0;
+ list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
+ ap_dev->requestq_count += ap_dev->pendingq_count;
+ ap_dev->pendingq_count = 0;
+ rc = ap_init_queue(ap_dev->qid);
+ if (rc == -ENODEV)
+ ap_dev->unregistered = 1;
+ else
+ __ap_schedule_poll_timer();
+}
+
+static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
+{
+ if (!ap_dev->unregistered) {
+ if (ap_poll_queue(ap_dev, flags))
+ ap_dev->unregistered = 1;
+ if (ap_dev->reset == AP_RESET_DO)
+ ap_reset(ap_dev);
+ }
+ return 0;
+}
+
+/**
+ * ap_poll_all(): Poll all AP devices.
+ * @dummy: Unused variable
+ *
+ * Poll all AP devices on the bus in a round robin fashion. Continue
+ * polling until bit 2^0 of the control flags is not set. If bit 2^1
+ * of the control flags has been set arm the poll timer.
+ */
+static void ap_poll_all(unsigned long dummy)
+{
+ unsigned long flags;
+ struct ap_device *ap_dev;
+
+ /* Reset the indicator if interrupts are used. Thus new interrupts can
+ * be received. Doing it in the beginning of the tasklet is therefor
+ * important that no requests on any AP get lost.
+ */
+ if (ap_using_interrupts())
+ xchg(ap_airq.lsi_ptr, 0);
+ do {
+ flags = 0;
+ spin_lock(&ap_device_list_lock);
+ list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
+ __ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
+ }
+ spin_unlock(&ap_device_list_lock);
+ } while (flags & 1);
+ if (flags & 2)
+ ap_schedule_poll_timer();
+}
+
+/**
+ * ap_poll_thread(): Thread that polls for finished requests.
+ * @data: Unused pointer
+ *
+ * AP bus poll thread. The purpose of this thread is to poll for
+ * finished requests in a loop if there is a "free" cpu - that is
+ * a cpu that doesn't have anything better to do. The polling stops
+ * as soon as there is another task or if all messages have been
+ * delivered.
+ */
+static int ap_poll_thread(void *data)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long flags;
+ int requests;
+ struct ap_device *ap_dev;
+
+ set_user_nice(current, MAX_NICE);
+ while (1) {
+ if (ap_suspend_flag)
+ return 0;
+ if (need_resched()) {
+ schedule();
+ continue;
+ }
+ add_wait_queue(&ap_poll_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (kthread_should_stop())
+ break;
+ requests = atomic_read(&ap_poll_requests);
+ if (requests <= 0)
+ schedule();
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ap_poll_wait, &wait);
+
+ flags = 0;
+ spin_lock_bh(&ap_device_list_lock);
+ list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
+ __ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
+ }
+ spin_unlock_bh(&ap_device_list_lock);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&ap_poll_wait, &wait);
+ return 0;
+}
+
+static int ap_poll_thread_start(void)
+{
+ int rc;
+
+ if (ap_using_interrupts() || ap_suspend_flag)
+ return 0;
+ mutex_lock(&ap_poll_thread_mutex);
+ if (!ap_poll_kthread) {
+ ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
+ rc = PTR_RET(ap_poll_kthread);
+ if (rc)
+ ap_poll_kthread = NULL;
+ }
+ else
+ rc = 0;
+ mutex_unlock(&ap_poll_thread_mutex);
+ return rc;
+}
+
+static void ap_poll_thread_stop(void)
+{
+ mutex_lock(&ap_poll_thread_mutex);
+ if (ap_poll_kthread) {
+ kthread_stop(ap_poll_kthread);
+ ap_poll_kthread = NULL;
+ }
+ mutex_unlock(&ap_poll_thread_mutex);
+}
+
+/**
+ * ap_request_timeout(): Handling of request timeouts
+ * @data: Holds the AP device.
+ *
+ * Handles request timeouts.
+ */
+static void ap_request_timeout(unsigned long data)
+{
+ struct ap_device *ap_dev = (struct ap_device *) data;
+
+ if (ap_dev->reset == AP_RESET_ARMED) {
+ ap_dev->reset = AP_RESET_DO;
+
+ if (ap_using_interrupts())
+ tasklet_schedule(&ap_tasklet);
+ }
+}
+
+static void ap_reset_domain(void)
+{
+ int i;
+
+ if ((ap_domain_index != -1) && (ap_test_config_domain(ap_domain_index)))
+ for (i = 0; i < AP_DEVICES; i++)
+ ap_reset_queue(AP_MKQID(i, ap_domain_index));
+}
+
+static void ap_reset_all(void)
+{
+ int i, j;
+
+ for (i = 0; i < AP_DOMAINS; i++) {
+ if (!ap_test_config_domain(i))
+ continue;
+ for (j = 0; j < AP_DEVICES; j++) {
+ if (!ap_test_config_card_id(j))
+ continue;
+ ap_reset_queue(AP_MKQID(j, i));
+ }
+ }
+}
+
+static struct reset_call ap_reset_call = {
+ .fn = ap_reset_all,
+};
+
+/**
+ * ap_module_init(): The module initialization code.
+ *
+ * Initializes the module.
+ */
+int __init ap_module_init(void)
+{
+ int rc, i;
+
+ if (ap_domain_index < -1 || ap_domain_index >= AP_DOMAINS) {
+ pr_warning("%d is not a valid cryptographic domain\n",
+ ap_domain_index);
+ return -EINVAL;
+ }
+ /* In resume callback we need to know if the user had set the domain.
+ * If so, we can not just reset it.
+ */
+ if (ap_domain_index >= 0)
+ user_set_domain = 1;
+
+ if (ap_instructions_available() != 0) {
+ pr_warning("The hardware system does not support "
+ "AP instructions\n");
+ return -ENODEV;
+ }
+ if (ap_interrupts_available()) {
+ rc = register_adapter_interrupt(&ap_airq);
+ ap_airq_flag = (rc == 0);
+ }
+
+ register_reset_call(&ap_reset_call);
+
+ /* Create /sys/bus/ap. */
+ rc = bus_register(&ap_bus_type);
+ if (rc)
+ goto out;
+ for (i = 0; ap_bus_attrs[i]; i++) {
+ rc = bus_create_file(&ap_bus_type, ap_bus_attrs[i]);
+ if (rc)
+ goto out_bus;
+ }
+
+ /* Create /sys/devices/ap. */
+ ap_root_device = root_device_register("ap");
+ rc = PTR_RET(ap_root_device);
+ if (rc)
+ goto out_bus;
+
+ ap_work_queue = create_singlethread_workqueue("kapwork");
+ if (!ap_work_queue) {
+ rc = -ENOMEM;
+ goto out_root;
+ }
+
+ ap_query_configuration();
+ if (ap_select_domain() == 0)
+ ap_scan_bus(NULL);
+
+ /* Setup the AP bus rescan timer. */
+ init_timer(&ap_config_timer);
+ ap_config_timer.function = ap_config_timeout;
+ ap_config_timer.data = 0;
+ ap_config_timer.expires = jiffies + ap_config_time * HZ;
+ add_timer(&ap_config_timer);
+
+ /* Setup the high resultion poll timer.
+ * If we are running under z/VM adjust polling to z/VM polling rate.
+ */
+ if (MACHINE_IS_VM)
+ poll_timeout = 1500000;
+ spin_lock_init(&ap_poll_timer_lock);
+ hrtimer_init(&ap_poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ ap_poll_timer.function = ap_poll_timeout;
+
+ /* Start the low priority AP bus poll thread. */
+ if (ap_thread_flag) {
+ rc = ap_poll_thread_start();
+ if (rc)
+ goto out_work;
+ }
+
+ return 0;
+
+out_work:
+ del_timer_sync(&ap_config_timer);
+ hrtimer_cancel(&ap_poll_timer);
+ destroy_workqueue(ap_work_queue);
+out_root:
+ root_device_unregister(ap_root_device);
+out_bus:
+ while (i--)
+ bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
+ bus_unregister(&ap_bus_type);
+out:
+ unregister_reset_call(&ap_reset_call);
+ if (ap_using_interrupts())
+ unregister_adapter_interrupt(&ap_airq);
+ return rc;
+}
+
+static int __ap_match_all(struct device *dev, void *data)
+{
+ return 1;
+}
+
+/**
+ * ap_modules_exit(): The module termination code
+ *
+ * Terminates the module.
+ */
+void ap_module_exit(void)
+{
+ int i;
+ struct device *dev;
+
+ ap_reset_domain();
+ ap_poll_thread_stop();
+ del_timer_sync(&ap_config_timer);
+ hrtimer_cancel(&ap_poll_timer);
+ destroy_workqueue(ap_work_queue);
+ tasklet_kill(&ap_tasklet);
+ while ((dev = bus_find_device(&ap_bus_type, NULL, NULL,
+ __ap_match_all)))
+ {
+ device_unregister(dev);
+ put_device(dev);
+ }
+ for (i = 0; ap_bus_attrs[i]; i++)
+ bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
+ root_device_unregister(ap_root_device);
+ bus_unregister(&ap_bus_type);
+ unregister_reset_call(&ap_reset_call);
+ if (ap_using_interrupts())
+ unregister_adapter_interrupt(&ap_airq);
+}
+
+module_init(ap_module_init);
+module_exit(ap_module_exit);
Code Review / kvmfornfv.git / blobdiff