Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / power / reset / Kconfig

diff --git a/kernel/drivers/power/reset/Kconfig b/kernel/drivers/power/reset/Kconfig
new file mode 100644 (file)
index 0000000..17d93a7
--- /dev/null
+++ b/kernel/drivers/power/reset/Kconfig
@@ -0,0 +1,170 @@
+menuconfig POWER_RESET
+       bool "Board level reset or power off"
+       help
+         Provides a number of drivers which either reset a complete board
+         or shut it down, by manipulating the main power supply on the board.
+
+         Say Y here to enable board reset and power off
+
+if POWER_RESET
+
+config POWER_RESET_AS3722
+       bool "ams AS3722 power-off driver"
+       depends on MFD_AS3722
+       help
+         This driver supports turning off board via a ams AS3722 power-off.
+
+config POWER_RESET_AT91_POWEROFF
+       bool "Atmel AT91 poweroff driver"
+       depends on ARCH_AT91
+       default SOC_AT91SAM9 || SOC_SAMA5
+       help
+         This driver supports poweroff for Atmel AT91SAM9 and SAMA5
+         SoCs
+
+config POWER_RESET_AT91_RESET
+       bool "Atmel AT91 reset driver"
+       depends on ARCH_AT91
+       default SOC_AT91SAM9 || SOC_SAMA5
+       help
+         This driver supports restart for Atmel AT91SAM9 and SAMA5
+         SoCs
+
+config POWER_RESET_AXXIA
+       bool "LSI Axxia reset driver"
+       depends on ARCH_AXXIA
+       help
+         This driver supports restart for Axxia SoC.
+
+         Say Y if you have an Axxia family SoC.
+
+config POWER_RESET_BRCMSTB
+       bool "Broadcom STB reset driver"
+       depends on ARM || MIPS || COMPILE_TEST
+       depends on MFD_SYSCON
+       default ARCH_BRCMSTB
+       help
+         This driver provides restart support for Broadcom STB boards.
+
+         Say Y here if you have a Broadcom STB board and you wish
+         to have restart support.
+
+config POWER_RESET_GPIO
+       bool "GPIO power-off driver"
+       depends on OF_GPIO
+       help
+         This driver supports turning off your board via a GPIO line.
+         If your board needs a GPIO high/low to power down, say Y and
+         create a binding in your devicetree.
+
+config POWER_RESET_GPIO_RESTART
+       bool "GPIO restart driver"
+       depends on OF_GPIO
+       help
+         This driver supports restarting your board via a GPIO line.
+         If your board needs a GPIO high/low to restart, say Y and
+         create a binding in your devicetree.
+
+config POWER_RESET_HISI
+       bool "Hisilicon power-off driver"
+       depends on ARCH_HISI
+       help
+         Reboot support for Hisilicon boards.
+
+config POWER_RESET_IMX
+       bool "IMX6 power-off driver"
+       depends on POWER_RESET && SOC_IMX6
+       help
+         This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
+         boards.If you want to use other pin to control external power,please
+         say N here or disable in dts to make sure pm_power_off never be
+         overwrote wrongly by this driver.
+
+config POWER_RESET_MSM
+       bool "Qualcomm MSM power-off driver"
+       depends on ARCH_QCOM
+       help
+         Power off and restart support for Qualcomm boards.
+
+config POWER_RESET_LTC2952
+       bool "LTC2952 PowerPath power-off driver"
+       depends on OF_GPIO
+       help
+         This driver supports an external powerdown trigger and board power
+         down via the LTC2952. Bindings are made in the device tree.
+
+config POWER_RESET_QNAP
+       bool "QNAP power-off driver"
+       depends on OF_GPIO && PLAT_ORION
+       help
+         This driver supports turning off QNAP NAS devices by sending
+         commands to the microcontroller which controls the main power.
+
+         Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+       bool "Restart power-off driver"
+       help
+         Some boards don't actually have the ability to power off.
+         Instead they restart, and u-boot holds the SoC until the
+         user presses a key. u-boot then boots into Linux.
+
+config POWER_RESET_ST
+       bool "ST restart driver"
+       depends on ARCH_STI
+       help
+         Reset support for STMicroelectronics boards.
+
+config POWER_RESET_VERSATILE
+       bool "ARM Versatile family reboot driver"
+       depends on ARM
+       depends on MFD_SYSCON
+       depends on OF
+       help
+         Power off and restart support for ARM Versatile family of
+         reference boards.
+
+config POWER_RESET_VEXPRESS
+       bool "ARM Versatile Express power-off and reset driver"
+       depends on ARM || ARM64
+       depends on VEXPRESS_CONFIG
+       help
+         Power off and reset support for the ARM Ltd. Versatile
+         Express boards.
+
+config POWER_RESET_XGENE
+       bool "APM SoC X-Gene reset driver"
+       depends on ARM64
+       help
+         Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+       bool "Keystone reset driver"
+       depends on ARCH_KEYSTONE
+       select MFD_SYSCON
+       help
+         Reboot support for the KEYSTONE SoCs.
+
+config POWER_RESET_SYSCON
+       bool "Generic SYSCON regmap reset driver"
+       depends on OF
+       select MFD_SYSCON
+       help
+         Reboot support for generic SYSCON mapped register reset.
+
+config POWER_RESET_SYSCON_POWEROFF
+       bool "Generic SYSCON regmap poweroff driver"
+       depends on OF
+       select MFD_SYSCON
+       help
+         Poweroff support for generic SYSCON mapped register poweroff.
+
+config POWER_RESET_RMOBILE
+       tristate "Renesas R-Mobile reset driver"
+       depends on ARCH_RMOBILE || COMPILE_TEST
+       depends on HAS_IOMEM
+       help
+         Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
+
+endif
+