Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / phy / phy-bcm-kona-usb2.c

diff --git a/kernel/drivers/phy/phy-bcm-kona-usb2.c b/kernel/drivers/phy/phy-bcm-kona-usb2.c
new file mode 100644 (file)
index 0000000..ef2dc1a
--- /dev/null
+++ b/kernel/drivers/phy/phy-bcm-kona-usb2.c
@@ -0,0 +1,155 @@
+/*
+ * phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Matt Porter <mporter@linaro.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define OTGCTL                 (0)
+#define OTGCTL_OTGSTAT2                BIT(31)
+#define OTGCTL_OTGSTAT1                BIT(30)
+#define OTGCTL_PRST_N_SW       BIT(11)
+#define OTGCTL_HRESET_N                BIT(10)
+#define OTGCTL_UTMI_LINE_STATE1        BIT(9)
+#define OTGCTL_UTMI_LINE_STATE0        BIT(8)
+
+#define P1CTL                  (8)
+#define P1CTL_SOFT_RESET       BIT(1)
+#define P1CTL_NON_DRIVING      BIT(0)
+
+struct bcm_kona_usb {
+       void __iomem *regs;
+};
+
+static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on)
+{
+       u32 val;
+
+       val = readl(phy->regs + OTGCTL);
+       if (on) {
+               /* Configure and power PHY */
+               val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
+                        OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
+               val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
+       } else {
+               val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
+       }
+       writel(val, phy->regs + OTGCTL);
+}
+
+static int bcm_kona_usb_phy_init(struct phy *gphy)
+{
+       struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+       u32 val;
+
+       /* Soft reset PHY */
+       val = readl(phy->regs + P1CTL);
+       val &= ~P1CTL_NON_DRIVING;
+       val |= P1CTL_SOFT_RESET;
+       writel(val, phy->regs + P1CTL);
+       writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL);
+       /* Reset needs to be asserted for 2ms */
+       mdelay(2);
+       writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL);
+
+       return 0;
+}
+
+static int bcm_kona_usb_phy_power_on(struct phy *gphy)
+{
+       struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+       bcm_kona_usb_phy_power(phy, 1);
+
+       return 0;
+}
+
+static int bcm_kona_usb_phy_power_off(struct phy *gphy)
+{
+       struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+       bcm_kona_usb_phy_power(phy, 0);
+
+       return 0;
+}
+
+static struct phy_ops ops = {
+       .init           = bcm_kona_usb_phy_init,
+       .power_on       = bcm_kona_usb_phy_power_on,
+       .power_off      = bcm_kona_usb_phy_power_off,
+       .owner          = THIS_MODULE,
+};
+
+static int bcm_kona_usb2_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct bcm_kona_usb *phy;
+       struct resource *res;
+       struct phy *gphy;
+       struct phy_provider *phy_provider;
+
+       phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+       if (!phy)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       phy->regs = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(phy->regs))
+               return PTR_ERR(phy->regs);
+
+       platform_set_drvdata(pdev, phy);
+
+       gphy = devm_phy_create(dev, NULL, &ops);
+       if (IS_ERR(gphy))
+               return PTR_ERR(gphy);
+
+       /* The Kona PHY supports an 8-bit wide UTMI interface */
+       phy_set_bus_width(gphy, 8);
+
+       phy_set_drvdata(gphy, phy);
+
+       phy_provider = devm_of_phy_provider_register(dev,
+                       of_phy_simple_xlate);
+
+       return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id bcm_kona_usb2_dt_ids[] = {
+       { .compatible = "brcm,kona-usb2-phy" },
+       { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids);
+
+static struct platform_driver bcm_kona_usb2_driver = {
+       .probe          = bcm_kona_usb2_probe,
+       .driver         = {
+               .name   = "bcm-kona-usb2",
+               .of_match_table = bcm_kona_usb2_dt_ids,
+       },
+};
+
+module_platform_driver(bcm_kona_usb2_driver);
+
+MODULE_ALIAS("platform:bcm-kona-usb2");
+MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
+MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");