Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / pci / host / Kconfig

diff --git a/kernel/drivers/pci/host/Kconfig b/kernel/drivers/pci/host/Kconfig
new file mode 100644 (file)
index 0000000..1dfb567
--- /dev/null
+++ b/kernel/drivers/pci/host/Kconfig
@@ -0,0 +1,128 @@
+menu "PCI host controller drivers"
+       depends on PCI
+
+config PCI_DRA7XX
+       bool "TI DRA7xx PCIe controller"
+       select PCIE_DW
+       depends on OF && HAS_IOMEM && TI_PIPE3
+       help
+        Enables support for the PCIe controller in the DRA7xx SoC.  There
+        are two instances of PCIe controller in DRA7xx.  This controller can
+        act both as EP and RC.  This reuses the Designware core.
+
+config PCI_MVEBU
+       bool "Marvell EBU PCIe controller"
+       depends on ARCH_MVEBU || ARCH_DOVE
+       depends on OF
+
+config PCIE_DW
+       bool
+
+config PCI_EXYNOS
+       bool "Samsung Exynos PCIe controller"
+       depends on SOC_EXYNOS5440
+       select PCIEPORTBUS
+       select PCIE_DW
+
+config PCI_IMX6
+       bool "Freescale i.MX6 PCIe controller"
+       depends on SOC_IMX6Q
+       select PCIEPORTBUS
+       select PCIE_DW
+
+config PCI_TEGRA
+       bool "NVIDIA Tegra PCIe controller"
+       depends on ARCH_TEGRA && !ARM64
+       help
+         Say Y here if you want support for the PCIe host controller found
+         on NVIDIA Tegra SoCs.
+
+config PCI_RCAR_GEN2
+       bool "Renesas R-Car Gen2 Internal PCI controller"
+       depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
+       help
+         Say Y here if you want internal PCI support on R-Car Gen2 SoC.
+         There are 3 internal PCI controllers available with a single
+         built-in EHCI/OHCI host controller present on each one.
+
+config PCI_RCAR_GEN2_PCIE
+       bool "Renesas R-Car PCIe controller"
+       depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
+       help
+         Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
+
+config PCI_HOST_GENERIC
+       bool "Generic PCI host controller"
+       depends on ARM && OF
+       help
+         Say Y here if you want to support a simple generic PCI host
+         controller, such as the one emulated by kvmtool.
+
+config PCIE_SPEAR13XX
+       bool "STMicroelectronics SPEAr PCIe controller"
+       depends on ARCH_SPEAR13XX
+       select PCIEPORTBUS
+       select PCIE_DW
+       help
+         Say Y here if you want PCIe support on SPEAr13XX SoCs.
+
+config PCI_KEYSTONE
+       bool "TI Keystone PCIe controller"
+       depends on ARCH_KEYSTONE
+       select PCIE_DW
+       select PCIEPORTBUS
+       help
+         Say Y here if you want to enable PCI controller support on Keystone
+         SoCs. The PCI controller on Keystone is based on Designware hardware
+         and therefore the driver re-uses the Designware core functions to
+         implement the driver.
+
+config PCIE_XILINX
+       bool "Xilinx AXI PCIe host bridge support"
+       depends on ARCH_ZYNQ
+       help
+         Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+         Host Bridge driver.
+
+config PCI_XGENE
+       bool "X-Gene PCIe controller"
+       depends on ARCH_XGENE
+       depends on OF
+       select PCIEPORTBUS
+       help
+         Say Y here if you want internal PCI support on APM X-Gene SoC.
+         There are 5 internal PCIe ports available. Each port is GEN3 capable
+         and have varied lanes from x1 to x8.
+
+config PCI_LAYERSCAPE
+       bool "Freescale Layerscape PCIe controller"
+       depends on OF && ARM
+       select PCIE_DW
+       select MFD_SYSCON
+       help
+         Say Y here if you want PCIe controller support on Layerscape SoCs.
+
+config PCI_VERSATILE
+       bool "ARM Versatile PB PCI controller"
+       depends on ARCH_VERSATILE
+
+config PCIE_IPROC
+       tristate "Broadcom iProc PCIe controller"
+       depends on OF && ARM
+       default n
+       help
+         This enables the iProc PCIe core controller support for Broadcom's
+         iProc family of SoCs. An appropriate bus interface driver also needs
+         to be enabled
+
+config PCIE_IPROC_PLATFORM
+       tristate "Broadcom iProc PCIe platform bus driver"
+       depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+       depends on OF
+       select PCIE_IPROC
+       default ARCH_BCM_IPROC
+       help
+         Say Y here if you want to use the Broadcom iProc PCIe controller
+         through the generic platform bus interface
+
+endmenu