--- /dev/null
+/* ZD1211 USB-WLAN driver for Linux
+ *
+ * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
+ * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
+ * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "zd_def.h"
+#include "zd_mac.h"
+#include "zd_usb.h"
+
+static struct usb_device_id usb_ids[] = {
+ /* ZD1211 */
+ { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0df6, 0x9075), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x14ea, 0xab10), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x3207), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
+ /* ZD1211B */
+ { USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe501), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0b05, 0x171b), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x2019, 0xed01), .driver_info = DEVICE_ZD1211B },
+ /* "Driverless" devices that need ejecting */
+ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
+ { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
+ {}
+};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB driver for devices with the ZD1211 chip.");
+MODULE_AUTHOR("Ulrich Kunitz");
+MODULE_AUTHOR("Daniel Drake");
+MODULE_VERSION("1.0");
+MODULE_DEVICE_TABLE(usb, usb_ids);
+
+#define FW_ZD1211_PREFIX "zd1211/zd1211_"
+#define FW_ZD1211B_PREFIX "zd1211/zd1211b_"
+
+static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req,
+ unsigned int count);
+
+/* USB device initialization */
+static void int_urb_complete(struct urb *urb);
+
+static int request_fw_file(
+ const struct firmware **fw, const char *name, struct device *device)
+{
+ int r;
+
+ dev_dbg_f(device, "fw name %s\n", name);
+
+ r = request_firmware(fw, name, device);
+ if (r)
+ dev_err(device,
+ "Could not load firmware file %s. Error number %d\n",
+ name, r);
+ return r;
+}
+
+static inline u16 get_bcdDevice(const struct usb_device *udev)
+{
+ return le16_to_cpu(udev->descriptor.bcdDevice);
+}
+
+enum upload_code_flags {
+ REBOOT = 1,
+};
+
+/* Ensures that MAX_TRANSFER_SIZE is even. */
+#define MAX_TRANSFER_SIZE (USB_MAX_TRANSFER_SIZE & ~1)
+
+static int upload_code(struct usb_device *udev,
+ const u8 *data, size_t size, u16 code_offset, int flags)
+{
+ u8 *p;
+ int r;
+
+ /* USB request blocks need "kmalloced" buffers.
+ */
+ p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL);
+ if (!p) {
+ r = -ENOMEM;
+ goto error;
+ }
+
+ size &= ~1;
+ while (size > 0) {
+ size_t transfer_size = size <= MAX_TRANSFER_SIZE ?
+ size : MAX_TRANSFER_SIZE;
+
+ dev_dbg_f(&udev->dev, "transfer size %zu\n", transfer_size);
+
+ memcpy(p, data, transfer_size);
+ r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_FIRMWARE_DOWNLOAD,
+ USB_DIR_OUT | USB_TYPE_VENDOR,
+ code_offset, 0, p, transfer_size, 1000 /* ms */);
+ if (r < 0) {
+ dev_err(&udev->dev,
+ "USB control request for firmware upload"
+ " failed. Error number %d\n", r);
+ goto error;
+ }
+ transfer_size = r & ~1;
+
+ size -= transfer_size;
+ data += transfer_size;
+ code_offset += transfer_size/sizeof(u16);
+ }
+
+ if (flags & REBOOT) {
+ u8 ret;
+
+ /* Use "DMA-aware" buffer. */
+ r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ USB_REQ_FIRMWARE_CONFIRM,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ 0, 0, p, sizeof(ret), 5000 /* ms */);
+ if (r != sizeof(ret)) {
+ dev_err(&udev->dev,
+ "control request firmeware confirmation failed."
+ " Return value %d\n", r);
+ if (r >= 0)
+ r = -ENODEV;
+ goto error;
+ }
+ ret = p[0];
+ if (ret & 0x80) {
+ dev_err(&udev->dev,
+ "Internal error while downloading."
+ " Firmware confirm return value %#04x\n",
+ (unsigned int)ret);
+ r = -ENODEV;
+ goto error;
+ }
+ dev_dbg_f(&udev->dev, "firmware confirm return value %#04x\n",
+ (unsigned int)ret);
+ }
+
+ r = 0;
+error:
+ kfree(p);
+ return r;
+}
+
+static u16 get_word(const void *data, u16 offset)
+{
+ const __le16 *p = data;
+ return le16_to_cpu(p[offset]);
+}
+
+static char *get_fw_name(struct zd_usb *usb, char *buffer, size_t size,
+ const char* postfix)
+{
+ scnprintf(buffer, size, "%s%s",
+ usb->is_zd1211b ?
+ FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX,
+ postfix);
+ return buffer;
+}
+
+static int handle_version_mismatch(struct zd_usb *usb,
+ const struct firmware *ub_fw)
+{
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ const struct firmware *ur_fw = NULL;
+ int offset;
+ int r = 0;
+ char fw_name[128];
+
+ r = request_fw_file(&ur_fw,
+ get_fw_name(usb, fw_name, sizeof(fw_name), "ur"),
+ &udev->dev);
+ if (r)
+ goto error;
+
+ r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT);
+ if (r)
+ goto error;
+
+ offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16));
+ r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
+ E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT);
+
+ /* At this point, the vendor driver downloads the whole firmware
+ * image, hacks around with version IDs, and uploads it again,
+ * completely overwriting the boot code. We do not do this here as
+ * it is not required on any tested devices, and it is suspected to
+ * cause problems. */
+error:
+ release_firmware(ur_fw);
+ return r;
+}
+
+static int upload_firmware(struct zd_usb *usb)
+{
+ int r;
+ u16 fw_bcdDevice;
+ u16 bcdDevice;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ const struct firmware *ub_fw = NULL;
+ const struct firmware *uph_fw = NULL;
+ char fw_name[128];
+
+ bcdDevice = get_bcdDevice(udev);
+
+ r = request_fw_file(&ub_fw,
+ get_fw_name(usb, fw_name, sizeof(fw_name), "ub"),
+ &udev->dev);
+ if (r)
+ goto error;
+
+ fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET);
+
+ if (fw_bcdDevice != bcdDevice) {
+ dev_info(&udev->dev,
+ "firmware version %#06x and device bootcode version "
+ "%#06x differ\n", fw_bcdDevice, bcdDevice);
+ if (bcdDevice <= 0x4313)
+ dev_warn(&udev->dev, "device has old bootcode, please "
+ "report success or failure\n");
+
+ r = handle_version_mismatch(usb, ub_fw);
+ if (r)
+ goto error;
+ } else {
+ dev_dbg_f(&udev->dev,
+ "firmware device id %#06x is equal to the "
+ "actual device id\n", fw_bcdDevice);
+ }
+
+
+ r = request_fw_file(&uph_fw,
+ get_fw_name(usb, fw_name, sizeof(fw_name), "uphr"),
+ &udev->dev);
+ if (r)
+ goto error;
+
+ r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT);
+ if (r) {
+ dev_err(&udev->dev,
+ "Could not upload firmware code uph. Error number %d\n",
+ r);
+ }
+
+ /* FALL-THROUGH */
+error:
+ release_firmware(ub_fw);
+ release_firmware(uph_fw);
+ return r;
+}
+
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ur");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "ur");
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ub");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "ub");
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "uphr");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "uphr");
+
+/* Read data from device address space using "firmware interface" which does
+ * not require firmware to be loaded. */
+int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len)
+{
+ int r;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ u8 *buf;
+
+ /* Use "DMA-aware" buffer. */
+ buf = kmalloc(len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ USB_REQ_FIRMWARE_READ_DATA, USB_DIR_IN | 0x40, addr, 0,
+ buf, len, 5000);
+ if (r < 0) {
+ dev_err(&udev->dev,
+ "read over firmware interface failed: %d\n", r);
+ goto exit;
+ } else if (r != len) {
+ dev_err(&udev->dev,
+ "incomplete read over firmware interface: %d/%d\n",
+ r, len);
+ r = -EIO;
+ goto exit;
+ }
+ r = 0;
+ memcpy(data, buf, len);
+exit:
+ kfree(buf);
+ return r;
+}
+
+#define urb_dev(urb) (&(urb)->dev->dev)
+
+static inline void handle_regs_int_override(struct urb *urb)
+{
+ struct zd_usb *usb = urb->context;
+ struct zd_usb_interrupt *intr = &usb->intr;
+
+ spin_lock(&intr->lock);
+ if (atomic_read(&intr->read_regs_enabled)) {
+ atomic_set(&intr->read_regs_enabled, 0);
+ intr->read_regs_int_overridden = 1;
+ complete(&intr->read_regs.completion);
+ }
+ spin_unlock(&intr->lock);
+}
+
+static inline void handle_regs_int(struct urb *urb)
+{
+ struct zd_usb *usb = urb->context;
+ struct zd_usb_interrupt *intr = &usb->intr;
+ int len;
+ u16 int_num;
+
+ ZD_ASSERT(in_interrupt());
+ spin_lock(&intr->lock);
+
+ int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
+ if (int_num == CR_INTERRUPT) {
+ struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
+ spin_lock(&mac->lock);
+ memcpy(&mac->intr_buffer, urb->transfer_buffer,
+ USB_MAX_EP_INT_BUFFER);
+ spin_unlock(&mac->lock);
+ schedule_work(&mac->process_intr);
+ } else if (atomic_read(&intr->read_regs_enabled)) {
+ len = urb->actual_length;
+ intr->read_regs.length = urb->actual_length;
+ if (len > sizeof(intr->read_regs.buffer))
+ len = sizeof(intr->read_regs.buffer);
+
+ memcpy(intr->read_regs.buffer, urb->transfer_buffer, len);
+
+ /* Sometimes USB_INT_ID_REGS is not overridden, but comes after
+ * USB_INT_ID_RETRY_FAILED. Read-reg retry then gets this
+ * delayed USB_INT_ID_REGS, but leaves USB_INT_ID_REGS of
+ * retry unhandled. Next read-reg command then might catch
+ * this wrong USB_INT_ID_REGS. Fix by ignoring wrong reads.
+ */
+ if (!check_read_regs(usb, intr->read_regs.req,
+ intr->read_regs.req_count))
+ goto out;
+
+ atomic_set(&intr->read_regs_enabled, 0);
+ intr->read_regs_int_overridden = 0;
+ complete(&intr->read_regs.completion);
+
+ goto out;
+ }
+
+out:
+ spin_unlock(&intr->lock);
+
+ /* CR_INTERRUPT might override read_reg too. */
+ if (int_num == CR_INTERRUPT && atomic_read(&intr->read_regs_enabled))
+ handle_regs_int_override(urb);
+}
+
+static void int_urb_complete(struct urb *urb)
+{
+ int r;
+ struct usb_int_header *hdr;
+ struct zd_usb *usb;
+ struct zd_usb_interrupt *intr;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ESHUTDOWN:
+ case -EINVAL:
+ case -ENODEV:
+ case -ENOENT:
+ case -ECONNRESET:
+ case -EPIPE:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ return;
+ default:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ goto resubmit;
+ }
+
+ if (urb->actual_length < sizeof(hdr)) {
+ dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb);
+ goto resubmit;
+ }
+
+ hdr = urb->transfer_buffer;
+ if (hdr->type != USB_INT_TYPE) {
+ dev_dbg_f(urb_dev(urb), "error: urb %p wrong type\n", urb);
+ goto resubmit;
+ }
+
+ /* USB_INT_ID_RETRY_FAILED triggered by tx-urb submit can override
+ * pending USB_INT_ID_REGS causing read command timeout.
+ */
+ usb = urb->context;
+ intr = &usb->intr;
+ if (hdr->id != USB_INT_ID_REGS && atomic_read(&intr->read_regs_enabled))
+ handle_regs_int_override(urb);
+
+ switch (hdr->id) {
+ case USB_INT_ID_REGS:
+ handle_regs_int(urb);
+ break;
+ case USB_INT_ID_RETRY_FAILED:
+ zd_mac_tx_failed(urb);
+ break;
+ default:
+ dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb,
+ (unsigned int)hdr->id);
+ goto resubmit;
+ }
+
+resubmit:
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r) {
+ dev_dbg_f(urb_dev(urb), "error: resubmit urb %p err code %d\n",
+ urb, r);
+ /* TODO: add worker to reset intr->urb */
+ }
+ return;
+}
+
+static inline int int_urb_interval(struct usb_device *udev)
+{
+ switch (udev->speed) {
+ case USB_SPEED_HIGH:
+ return 4;
+ case USB_SPEED_LOW:
+ return 10;
+ case USB_SPEED_FULL:
+ default:
+ return 1;
+ }
+}
+
+static inline int usb_int_enabled(struct zd_usb *usb)
+{
+ unsigned long flags;
+ struct zd_usb_interrupt *intr = &usb->intr;
+ struct urb *urb;
+
+ spin_lock_irqsave(&intr->lock, flags);
+ urb = intr->urb;
+ spin_unlock_irqrestore(&intr->lock, flags);
+ return urb != NULL;
+}
+
+int zd_usb_enable_int(struct zd_usb *usb)
+{
+ int r;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ struct zd_usb_interrupt *intr = &usb->intr;
+ struct urb *urb;
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ ZD_ASSERT(!irqs_disabled());
+ spin_lock_irq(&intr->lock);
+ if (intr->urb) {
+ spin_unlock_irq(&intr->lock);
+ r = 0;
+ goto error_free_urb;
+ }
+ intr->urb = urb;
+ spin_unlock_irq(&intr->lock);
+
+ r = -ENOMEM;
+ intr->buffer = usb_alloc_coherent(udev, USB_MAX_EP_INT_BUFFER,
+ GFP_KERNEL, &intr->buffer_dma);
+ if (!intr->buffer) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "couldn't allocate transfer_buffer\n");
+ goto error_set_urb_null;
+ }
+
+ usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, EP_INT_IN),
+ intr->buffer, USB_MAX_EP_INT_BUFFER,
+ int_urb_complete, usb,
+ intr->interval);
+ urb->transfer_dma = intr->buffer_dma;
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ dev_dbg_f(zd_usb_dev(usb), "submit urb %p\n", intr->urb);
+ r = usb_submit_urb(urb, GFP_KERNEL);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "Couldn't submit urb. Error number %d\n", r);
+ goto error;
+ }
+
+ return 0;
+error:
+ usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER,
+ intr->buffer, intr->buffer_dma);
+error_set_urb_null:
+ spin_lock_irq(&intr->lock);
+ intr->urb = NULL;
+ spin_unlock_irq(&intr->lock);
+error_free_urb:
+ usb_free_urb(urb);
+out:
+ return r;
+}
+
+void zd_usb_disable_int(struct zd_usb *usb)
+{
+ unsigned long flags;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ struct zd_usb_interrupt *intr = &usb->intr;
+ struct urb *urb;
+ void *buffer;
+ dma_addr_t buffer_dma;
+
+ spin_lock_irqsave(&intr->lock, flags);
+ urb = intr->urb;
+ if (!urb) {
+ spin_unlock_irqrestore(&intr->lock, flags);
+ return;
+ }
+ intr->urb = NULL;
+ buffer = intr->buffer;
+ buffer_dma = intr->buffer_dma;
+ intr->buffer = NULL;
+ spin_unlock_irqrestore(&intr->lock, flags);
+
+ usb_kill_urb(urb);
+ dev_dbg_f(zd_usb_dev(usb), "urb %p killed\n", urb);
+ usb_free_urb(urb);
+
+ if (buffer)
+ usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER,
+ buffer, buffer_dma);
+}
+
+static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer,
+ unsigned int length)
+{
+ int i;
+ const struct rx_length_info *length_info;
+
+ if (length < sizeof(struct rx_length_info)) {
+ /* It's not a complete packet anyhow. */
+ dev_dbg_f(zd_usb_dev(usb), "invalid, small RX packet : %d\n",
+ length);
+ return;
+ }
+ length_info = (struct rx_length_info *)
+ (buffer + length - sizeof(struct rx_length_info));
+
+ /* It might be that three frames are merged into a single URB
+ * transaction. We have to check for the length info tag.
+ *
+ * While testing we discovered that length_info might be unaligned,
+ * because if USB transactions are merged, the last packet will not
+ * be padded. Unaligned access might also happen if the length_info
+ * structure is not present.
+ */
+ if (get_unaligned_le16(&length_info->tag) == RX_LENGTH_INFO_TAG)
+ {
+ unsigned int l, k, n;
+ for (i = 0, l = 0;; i++) {
+ k = get_unaligned_le16(&length_info->length[i]);
+ if (k == 0)
+ return;
+ n = l+k;
+ if (n > length)
+ return;
+ zd_mac_rx(zd_usb_to_hw(usb), buffer+l, k);
+ if (i >= 2)
+ return;
+ l = (n+3) & ~3;
+ }
+ } else {
+ zd_mac_rx(zd_usb_to_hw(usb), buffer, length);
+ }
+}
+
+static void rx_urb_complete(struct urb *urb)
+{
+ int r;
+ struct zd_usb *usb;
+ struct zd_usb_rx *rx;
+ const u8 *buffer;
+ unsigned int length;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ESHUTDOWN:
+ case -EINVAL:
+ case -ENODEV:
+ case -ENOENT:
+ case -ECONNRESET:
+ case -EPIPE:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ return;
+ default:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ goto resubmit;
+ }
+
+ buffer = urb->transfer_buffer;
+ length = urb->actual_length;
+ usb = urb->context;
+ rx = &usb->rx;
+
+ tasklet_schedule(&rx->reset_timer_tasklet);
+
+ if (length%rx->usb_packet_size > rx->usb_packet_size-4) {
+ /* If there is an old first fragment, we don't care. */
+ dev_dbg_f(urb_dev(urb), "*** first fragment ***\n");
+ ZD_ASSERT(length <= ARRAY_SIZE(rx->fragment));
+ spin_lock(&rx->lock);
+ memcpy(rx->fragment, buffer, length);
+ rx->fragment_length = length;
+ spin_unlock(&rx->lock);
+ goto resubmit;
+ }
+
+ spin_lock(&rx->lock);
+ if (rx->fragment_length > 0) {
+ /* We are on a second fragment, we believe */
+ ZD_ASSERT(length + rx->fragment_length <=
+ ARRAY_SIZE(rx->fragment));
+ dev_dbg_f(urb_dev(urb), "*** second fragment ***\n");
+ memcpy(rx->fragment+rx->fragment_length, buffer, length);
+ handle_rx_packet(usb, rx->fragment,
+ rx->fragment_length + length);
+ rx->fragment_length = 0;
+ spin_unlock(&rx->lock);
+ } else {
+ spin_unlock(&rx->lock);
+ handle_rx_packet(usb, buffer, length);
+ }
+
+resubmit:
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_dbg_f(urb_dev(urb), "urb %p resubmit error %d\n", urb, r);
+}
+
+static struct urb *alloc_rx_urb(struct zd_usb *usb)
+{
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ struct urb *urb;
+ void *buffer;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ return NULL;
+ buffer = usb_alloc_coherent(udev, USB_MAX_RX_SIZE, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buffer) {
+ usb_free_urb(urb);
+ return NULL;
+ }
+
+ usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN),
+ buffer, USB_MAX_RX_SIZE,
+ rx_urb_complete, usb);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ return urb;
+}
+
+static void free_rx_urb(struct urb *urb)
+{
+ if (!urb)
+ return;
+ usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+}
+
+static int __zd_usb_enable_rx(struct zd_usb *usb)
+{
+ int i, r;
+ struct zd_usb_rx *rx = &usb->rx;
+ struct urb **urbs;
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ r = -ENOMEM;
+ urbs = kcalloc(RX_URBS_COUNT, sizeof(struct urb *), GFP_KERNEL);
+ if (!urbs)
+ goto error;
+ for (i = 0; i < RX_URBS_COUNT; i++) {
+ urbs[i] = alloc_rx_urb(usb);
+ if (!urbs[i])
+ goto error;
+ }
+
+ ZD_ASSERT(!irqs_disabled());
+ spin_lock_irq(&rx->lock);
+ if (rx->urbs) {
+ spin_unlock_irq(&rx->lock);
+ r = 0;
+ goto error;
+ }
+ rx->urbs = urbs;
+ rx->urbs_count = RX_URBS_COUNT;
+ spin_unlock_irq(&rx->lock);
+
+ for (i = 0; i < RX_URBS_COUNT; i++) {
+ r = usb_submit_urb(urbs[i], GFP_KERNEL);
+ if (r)
+ goto error_submit;
+ }
+
+ return 0;
+error_submit:
+ for (i = 0; i < RX_URBS_COUNT; i++) {
+ usb_kill_urb(urbs[i]);
+ }
+ spin_lock_irq(&rx->lock);
+ rx->urbs = NULL;
+ rx->urbs_count = 0;
+ spin_unlock_irq(&rx->lock);
+error:
+ if (urbs) {
+ for (i = 0; i < RX_URBS_COUNT; i++)
+ free_rx_urb(urbs[i]);
+ }
+ return r;
+}
+
+int zd_usb_enable_rx(struct zd_usb *usb)
+{
+ int r;
+ struct zd_usb_rx *rx = &usb->rx;
+
+ mutex_lock(&rx->setup_mutex);
+ r = __zd_usb_enable_rx(usb);
+ mutex_unlock(&rx->setup_mutex);
+
+ zd_usb_reset_rx_idle_timer(usb);
+
+ return r;
+}
+
+static void __zd_usb_disable_rx(struct zd_usb *usb)
+{
+ int i;
+ unsigned long flags;
+ struct urb **urbs;
+ unsigned int count;
+ struct zd_usb_rx *rx = &usb->rx;
+
+ spin_lock_irqsave(&rx->lock, flags);
+ urbs = rx->urbs;
+ count = rx->urbs_count;
+ spin_unlock_irqrestore(&rx->lock, flags);
+ if (!urbs)
+ return;
+
+ for (i = 0; i < count; i++) {
+ usb_kill_urb(urbs[i]);
+ free_rx_urb(urbs[i]);
+ }
+ kfree(urbs);
+
+ spin_lock_irqsave(&rx->lock, flags);
+ rx->urbs = NULL;
+ rx->urbs_count = 0;
+ spin_unlock_irqrestore(&rx->lock, flags);
+}
+
+void zd_usb_disable_rx(struct zd_usb *usb)
+{
+ struct zd_usb_rx *rx = &usb->rx;
+
+ mutex_lock(&rx->setup_mutex);
+ __zd_usb_disable_rx(usb);
+ mutex_unlock(&rx->setup_mutex);
+
+ tasklet_kill(&rx->reset_timer_tasklet);
+ cancel_delayed_work_sync(&rx->idle_work);
+}
+
+static void zd_usb_reset_rx(struct zd_usb *usb)
+{
+ bool do_reset;
+ struct zd_usb_rx *rx = &usb->rx;
+ unsigned long flags;
+
+ mutex_lock(&rx->setup_mutex);
+
+ spin_lock_irqsave(&rx->lock, flags);
+ do_reset = rx->urbs != NULL;
+ spin_unlock_irqrestore(&rx->lock, flags);
+
+ if (do_reset) {
+ __zd_usb_disable_rx(usb);
+ __zd_usb_enable_rx(usb);
+ }
+
+ mutex_unlock(&rx->setup_mutex);
+
+ if (do_reset)
+ zd_usb_reset_rx_idle_timer(usb);
+}
+
+/**
+ * zd_usb_disable_tx - disable transmission
+ * @usb: the zd1211rw-private USB structure
+ *
+ * Frees all URBs in the free list and marks the transmission as disabled.
+ */
+void zd_usb_disable_tx(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+ unsigned long flags;
+
+ atomic_set(&tx->enabled, 0);
+
+ /* kill all submitted tx-urbs */
+ usb_kill_anchored_urbs(&tx->submitted);
+
+ spin_lock_irqsave(&tx->lock, flags);
+ WARN_ON(!skb_queue_empty(&tx->submitted_skbs));
+ WARN_ON(tx->submitted_urbs != 0);
+ tx->submitted_urbs = 0;
+ spin_unlock_irqrestore(&tx->lock, flags);
+
+ /* The stopped state is ignored, relying on ieee80211_wake_queues()
+ * in a potentionally following zd_usb_enable_tx().
+ */
+}
+
+/**
+ * zd_usb_enable_tx - enables transmission
+ * @usb: a &struct zd_usb pointer
+ *
+ * This function enables transmission and prepares the &zd_usb_tx data
+ * structure.
+ */
+void zd_usb_enable_tx(struct zd_usb *usb)
+{
+ unsigned long flags;
+ struct zd_usb_tx *tx = &usb->tx;
+
+ spin_lock_irqsave(&tx->lock, flags);
+ atomic_set(&tx->enabled, 1);
+ tx->submitted_urbs = 0;
+ ieee80211_wake_queues(zd_usb_to_hw(usb));
+ tx->stopped = 0;
+ spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+static void tx_dec_submitted_urbs(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx->lock, flags);
+ --tx->submitted_urbs;
+ if (tx->stopped && tx->submitted_urbs <= ZD_USB_TX_LOW) {
+ ieee80211_wake_queues(zd_usb_to_hw(usb));
+ tx->stopped = 0;
+ }
+ spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+static void tx_inc_submitted_urbs(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tx->lock, flags);
+ ++tx->submitted_urbs;
+ if (!tx->stopped && tx->submitted_urbs > ZD_USB_TX_HIGH) {
+ ieee80211_stop_queues(zd_usb_to_hw(usb));
+ tx->stopped = 1;
+ }
+ spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+/**
+ * tx_urb_complete - completes the execution of an URB
+ * @urb: a URB
+ *
+ * This function is called if the URB has been transferred to a device or an
+ * error has happened.
+ */
+static void tx_urb_complete(struct urb *urb)
+{
+ int r;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ struct zd_usb *usb;
+ struct zd_usb_tx *tx;
+
+ skb = (struct sk_buff *)urb->context;
+ info = IEEE80211_SKB_CB(skb);
+ /*
+ * grab 'usb' pointer before handing off the skb (since
+ * it might be freed by zd_mac_tx_to_dev or mac80211)
+ */
+ usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb;
+ tx = &usb->tx;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ESHUTDOWN:
+ case -EINVAL:
+ case -ENODEV:
+ case -ENOENT:
+ case -ECONNRESET:
+ case -EPIPE:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ break;
+ default:
+ dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
+ goto resubmit;
+ }
+free_urb:
+ skb_unlink(skb, &usb->tx.submitted_skbs);
+ zd_mac_tx_to_dev(skb, urb->status);
+ usb_free_urb(urb);
+ tx_dec_submitted_urbs(usb);
+ return;
+resubmit:
+ usb_anchor_urb(urb, &tx->submitted);
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r) {
+ usb_unanchor_urb(urb);
+ dev_dbg_f(urb_dev(urb), "error resubmit urb %p %d\n", urb, r);
+ goto free_urb;
+ }
+}
+
+/**
+ * zd_usb_tx: initiates transfer of a frame of the device
+ *
+ * @usb: the zd1211rw-private USB structure
+ * @skb: a &struct sk_buff pointer
+ *
+ * This function tranmits a frame to the device. It doesn't wait for
+ * completion. The frame must contain the control set and have all the
+ * control set information available.
+ *
+ * The function returns 0 if the transfer has been successfully initiated.
+ */
+int zd_usb_tx(struct zd_usb *usb, struct sk_buff *skb)
+{
+ int r;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+ struct urb *urb;
+ struct zd_usb_tx *tx = &usb->tx;
+
+ if (!atomic_read(&tx->enabled)) {
+ r = -ENOENT;
+ goto out;
+ }
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT),
+ skb->data, skb->len, tx_urb_complete, skb);
+
+ info->rate_driver_data[1] = (void *)jiffies;
+ skb_queue_tail(&tx->submitted_skbs, skb);
+ usb_anchor_urb(urb, &tx->submitted);
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb), "error submit urb %p %d\n", urb, r);
+ usb_unanchor_urb(urb);
+ skb_unlink(skb, &tx->submitted_skbs);
+ goto error;
+ }
+ tx_inc_submitted_urbs(usb);
+ return 0;
+error:
+ usb_free_urb(urb);
+out:
+ return r;
+}
+
+static bool zd_tx_timeout(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+ struct sk_buff_head *q = &tx->submitted_skbs;
+ struct sk_buff *skb, *skbnext;
+ struct ieee80211_tx_info *info;
+ unsigned long flags, trans_start;
+ bool have_timedout = false;
+
+ spin_lock_irqsave(&q->lock, flags);
+ skb_queue_walk_safe(q, skb, skbnext) {
+ info = IEEE80211_SKB_CB(skb);
+ trans_start = (unsigned long)info->rate_driver_data[1];
+
+ if (time_is_before_jiffies(trans_start + ZD_TX_TIMEOUT)) {
+ have_timedout = true;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&q->lock, flags);
+
+ return have_timedout;
+}
+
+static void zd_tx_watchdog_handler(struct work_struct *work)
+{
+ struct zd_usb *usb =
+ container_of(work, struct zd_usb, tx.watchdog_work.work);
+ struct zd_usb_tx *tx = &usb->tx;
+
+ if (!atomic_read(&tx->enabled) || !tx->watchdog_enabled)
+ goto out;
+ if (!zd_tx_timeout(usb))
+ goto out;
+
+ /* TX halted, try reset */
+ dev_warn(zd_usb_dev(usb), "TX-stall detected, resetting device...");
+
+ usb_queue_reset_device(usb->intf);
+
+ /* reset will stop this worker, don't rearm */
+ return;
+out:
+ queue_delayed_work(zd_workqueue, &tx->watchdog_work,
+ ZD_TX_WATCHDOG_INTERVAL);
+}
+
+void zd_tx_watchdog_enable(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+
+ if (!tx->watchdog_enabled) {
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+ queue_delayed_work(zd_workqueue, &tx->watchdog_work,
+ ZD_TX_WATCHDOG_INTERVAL);
+ tx->watchdog_enabled = 1;
+ }
+}
+
+void zd_tx_watchdog_disable(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+
+ if (tx->watchdog_enabled) {
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+ tx->watchdog_enabled = 0;
+ cancel_delayed_work_sync(&tx->watchdog_work);
+ }
+}
+
+static void zd_rx_idle_timer_handler(struct work_struct *work)
+{
+ struct zd_usb *usb =
+ container_of(work, struct zd_usb, rx.idle_work.work);
+ struct zd_mac *mac = zd_usb_to_mac(usb);
+
+ if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
+ return;
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ /* 30 seconds since last rx, reset rx */
+ zd_usb_reset_rx(usb);
+}
+
+static void zd_usb_reset_rx_idle_timer_tasklet(unsigned long param)
+{
+ struct zd_usb *usb = (struct zd_usb *)param;
+
+ zd_usb_reset_rx_idle_timer(usb);
+}
+
+void zd_usb_reset_rx_idle_timer(struct zd_usb *usb)
+{
+ struct zd_usb_rx *rx = &usb->rx;
+
+ mod_delayed_work(zd_workqueue, &rx->idle_work, ZD_RX_IDLE_INTERVAL);
+}
+
+static inline void init_usb_interrupt(struct zd_usb *usb)
+{
+ struct zd_usb_interrupt *intr = &usb->intr;
+
+ spin_lock_init(&intr->lock);
+ intr->interval = int_urb_interval(zd_usb_to_usbdev(usb));
+ init_completion(&intr->read_regs.completion);
+ atomic_set(&intr->read_regs_enabled, 0);
+ intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT);
+}
+
+static inline void init_usb_rx(struct zd_usb *usb)
+{
+ struct zd_usb_rx *rx = &usb->rx;
+
+ spin_lock_init(&rx->lock);
+ mutex_init(&rx->setup_mutex);
+ if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) {
+ rx->usb_packet_size = 512;
+ } else {
+ rx->usb_packet_size = 64;
+ }
+ ZD_ASSERT(rx->fragment_length == 0);
+ INIT_DELAYED_WORK(&rx->idle_work, zd_rx_idle_timer_handler);
+ rx->reset_timer_tasklet.func = zd_usb_reset_rx_idle_timer_tasklet;
+ rx->reset_timer_tasklet.data = (unsigned long)usb;
+}
+
+static inline void init_usb_tx(struct zd_usb *usb)
+{
+ struct zd_usb_tx *tx = &usb->tx;
+
+ spin_lock_init(&tx->lock);
+ atomic_set(&tx->enabled, 0);
+ tx->stopped = 0;
+ skb_queue_head_init(&tx->submitted_skbs);
+ init_usb_anchor(&tx->submitted);
+ tx->submitted_urbs = 0;
+ tx->watchdog_enabled = 0;
+ INIT_DELAYED_WORK(&tx->watchdog_work, zd_tx_watchdog_handler);
+}
+
+void zd_usb_init(struct zd_usb *usb, struct ieee80211_hw *hw,
+ struct usb_interface *intf)
+{
+ memset(usb, 0, sizeof(*usb));
+ usb->intf = usb_get_intf(intf);
+ usb_set_intfdata(usb->intf, hw);
+ init_usb_anchor(&usb->submitted_cmds);
+ init_usb_interrupt(usb);
+ init_usb_tx(usb);
+ init_usb_rx(usb);
+}
+
+void zd_usb_clear(struct zd_usb *usb)
+{
+ usb_set_intfdata(usb->intf, NULL);
+ usb_put_intf(usb->intf);
+ ZD_MEMCLEAR(usb, sizeof(*usb));
+ /* FIXME: usb_interrupt, usb_tx, usb_rx? */
+}
+
+static const char *speed(enum usb_device_speed speed)
+{
+ switch (speed) {
+ case USB_SPEED_LOW:
+ return "low";
+ case USB_SPEED_FULL:
+ return "full";
+ case USB_SPEED_HIGH:
+ return "high";
+ default:
+ return "unknown speed";
+ }
+}
+
+static int scnprint_id(struct usb_device *udev, char *buffer, size_t size)
+{
+ return scnprintf(buffer, size, "%04hx:%04hx v%04hx %s",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ get_bcdDevice(udev),
+ speed(udev->speed));
+}
+
+int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size)
+{
+ struct usb_device *udev = interface_to_usbdev(usb->intf);
+ return scnprint_id(udev, buffer, size);
+}
+
+#ifdef DEBUG
+static void print_id(struct usb_device *udev)
+{
+ char buffer[40];
+
+ scnprint_id(udev, buffer, sizeof(buffer));
+ buffer[sizeof(buffer)-1] = 0;
+ dev_dbg_f(&udev->dev, "%s\n", buffer);
+}
+#else
+#define print_id(udev) do { } while (0)
+#endif
+
+static int eject_installer(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *iface_desc = &intf->altsetting[0];
+ struct usb_endpoint_descriptor *endpoint;
+ unsigned char *cmd;
+ u8 bulk_out_ep;
+ int r;
+
+ /* Find bulk out endpoint */
+ for (r = 1; r >= 0; r--) {
+ endpoint = &iface_desc->endpoint[r].desc;
+ if (usb_endpoint_dir_out(endpoint) &&
+ usb_endpoint_xfer_bulk(endpoint)) {
+ bulk_out_ep = endpoint->bEndpointAddress;
+ break;
+ }
+ }
+ if (r == -1) {
+ dev_err(&udev->dev,
+ "zd1211rw: Could not find bulk out endpoint\n");
+ return -ENODEV;
+ }
+
+ cmd = kzalloc(31, GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENODEV;
+
+ /* USB bulk command block */
+ cmd[0] = 0x55; /* bulk command signature */
+ cmd[1] = 0x53; /* bulk command signature */
+ cmd[2] = 0x42; /* bulk command signature */
+ cmd[3] = 0x43; /* bulk command signature */
+ cmd[14] = 6; /* command length */
+
+ cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */
+ cmd[19] = 0x2; /* eject disc */
+
+ dev_info(&udev->dev, "Ejecting virtual installer media...\n");
+ r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep),
+ cmd, 31, NULL, 2000);
+ kfree(cmd);
+ if (r)
+ return r;
+
+ /* At this point, the device disconnects and reconnects with the real
+ * ID numbers. */
+
+ usb_set_intfdata(intf, NULL);
+ return 0;
+}
+
+int zd_usb_init_hw(struct zd_usb *usb)
+{
+ int r;
+ struct zd_mac *mac = zd_usb_to_mac(usb);
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ r = upload_firmware(usb);
+ if (r) {
+ dev_err(zd_usb_dev(usb),
+ "couldn't load firmware. Error number %d\n", r);
+ return r;
+ }
+
+ r = usb_reset_configuration(zd_usb_to_usbdev(usb));
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "couldn't reset configuration. Error number %d\n", r);
+ return r;
+ }
+
+ r = zd_mac_init_hw(mac->hw);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "couldn't initialize mac. Error number %d\n", r);
+ return r;
+ }
+
+ usb->initialized = 1;
+ return 0;
+}
+
+static int probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int r;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct zd_usb *usb;
+ struct ieee80211_hw *hw = NULL;
+
+ print_id(udev);
+
+ if (id->driver_info & DEVICE_INSTALLER)
+ return eject_installer(intf);
+
+ switch (udev->speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ break;
+ default:
+ dev_dbg_f(&intf->dev, "Unknown USB speed\n");
+ r = -ENODEV;
+ goto error;
+ }
+
+ r = usb_reset_device(udev);
+ if (r) {
+ dev_err(&intf->dev,
+ "couldn't reset usb device. Error number %d\n", r);
+ goto error;
+ }
+
+ hw = zd_mac_alloc_hw(intf);
+ if (hw == NULL) {
+ r = -ENOMEM;
+ goto error;
+ }
+
+ usb = &zd_hw_mac(hw)->chip.usb;
+ usb->is_zd1211b = (id->driver_info == DEVICE_ZD1211B) != 0;
+
+ r = zd_mac_preinit_hw(hw);
+ if (r) {
+ dev_dbg_f(&intf->dev,
+ "couldn't initialize mac. Error number %d\n", r);
+ goto error;
+ }
+
+ r = ieee80211_register_hw(hw);
+ if (r) {
+ dev_dbg_f(&intf->dev,
+ "couldn't register device. Error number %d\n", r);
+ goto error;
+ }
+
+ dev_dbg_f(&intf->dev, "successful\n");
+ dev_info(&intf->dev, "%s\n", wiphy_name(hw->wiphy));
+ return 0;
+error:
+ usb_reset_device(interface_to_usbdev(intf));
+ if (hw) {
+ zd_mac_clear(zd_hw_mac(hw));
+ ieee80211_free_hw(hw);
+ }
+ return r;
+}
+
+static void disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *hw = zd_intf_to_hw(intf);
+ struct zd_mac *mac;
+ struct zd_usb *usb;
+
+ /* Either something really bad happened, or we're just dealing with
+ * a DEVICE_INSTALLER. */
+ if (hw == NULL)
+ return;
+
+ mac = zd_hw_mac(hw);
+ usb = &mac->chip.usb;
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ ieee80211_unregister_hw(hw);
+
+ /* Just in case something has gone wrong! */
+ zd_usb_disable_tx(usb);
+ zd_usb_disable_rx(usb);
+ zd_usb_disable_int(usb);
+
+ /* If the disconnect has been caused by a removal of the
+ * driver module, the reset allows reloading of the driver. If the
+ * reset will not be executed here, the upload of the firmware in the
+ * probe function caused by the reloading of the driver will fail.
+ */
+ usb_reset_device(interface_to_usbdev(intf));
+
+ zd_mac_clear(mac);
+ ieee80211_free_hw(hw);
+ dev_dbg(&intf->dev, "disconnected\n");
+}
+
+static void zd_usb_resume(struct zd_usb *usb)
+{
+ struct zd_mac *mac = zd_usb_to_mac(usb);
+ int r;
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ r = zd_op_start(zd_usb_to_hw(usb));
+ if (r < 0) {
+ dev_warn(zd_usb_dev(usb), "Device resume failed "
+ "with error code %d. Retrying...\n", r);
+ if (usb->was_running)
+ set_bit(ZD_DEVICE_RUNNING, &mac->flags);
+ usb_queue_reset_device(usb->intf);
+ return;
+ }
+
+ if (mac->type != NL80211_IFTYPE_UNSPECIFIED) {
+ r = zd_restore_settings(mac);
+ if (r < 0) {
+ dev_dbg(zd_usb_dev(usb),
+ "failed to restore settings, %d\n", r);
+ return;
+ }
+ }
+}
+
+static void zd_usb_stop(struct zd_usb *usb)
+{
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ zd_op_stop(zd_usb_to_hw(usb));
+
+ zd_usb_disable_tx(usb);
+ zd_usb_disable_rx(usb);
+ zd_usb_disable_int(usb);
+
+ usb->initialized = 0;
+}
+
+static int pre_reset(struct usb_interface *intf)
+{
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct zd_mac *mac;
+ struct zd_usb *usb;
+
+ if (!hw || intf->condition != USB_INTERFACE_BOUND)
+ return 0;
+
+ mac = zd_hw_mac(hw);
+ usb = &mac->chip.usb;
+
+ usb->was_running = test_bit(ZD_DEVICE_RUNNING, &mac->flags);
+
+ zd_usb_stop(usb);
+
+ mutex_lock(&mac->chip.mutex);
+ return 0;
+}
+
+static int post_reset(struct usb_interface *intf)
+{
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct zd_mac *mac;
+ struct zd_usb *usb;
+
+ if (!hw || intf->condition != USB_INTERFACE_BOUND)
+ return 0;
+
+ mac = zd_hw_mac(hw);
+ usb = &mac->chip.usb;
+
+ mutex_unlock(&mac->chip.mutex);
+
+ if (usb->was_running)
+ zd_usb_resume(usb);
+ return 0;
+}
+
+static struct usb_driver driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = usb_ids,
+ .probe = probe,
+ .disconnect = disconnect,
+ .pre_reset = pre_reset,
+ .post_reset = post_reset,
+ .disable_hub_initiated_lpm = 1,
+};
+
+struct workqueue_struct *zd_workqueue;
+
+static int __init usb_init(void)
+{
+ int r;
+
+ pr_debug("%s usb_init()\n", driver.name);
+
+ zd_workqueue = create_singlethread_workqueue(driver.name);
+ if (zd_workqueue == NULL) {
+ printk(KERN_ERR "%s couldn't create workqueue\n", driver.name);
+ return -ENOMEM;
+ }
+
+ r = usb_register(&driver);
+ if (r) {
+ destroy_workqueue(zd_workqueue);
+ printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
+ driver.name, r);
+ return r;
+ }
+
+ pr_debug("%s initialized\n", driver.name);
+ return 0;
+}
+
+static void __exit usb_exit(void)
+{
+ pr_debug("%s usb_exit()\n", driver.name);
+ usb_deregister(&driver);
+ destroy_workqueue(zd_workqueue);
+}
+
+module_init(usb_init);
+module_exit(usb_exit);
+
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+ int *actual_length, int timeout)
+{
+ /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+ * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+ * descriptor.
+ */
+ struct usb_host_endpoint *ep;
+ unsigned int pipe;
+
+ pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+ ep = usb_pipe_endpoint(udev, pipe);
+ if (!ep)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ return usb_interrupt_msg(udev, pipe, data, len,
+ actual_length, timeout);
+ } else {
+ pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+ return usb_bulk_msg(udev, pipe, data, len, actual_length,
+ timeout);
+ }
+}
+
+static int usb_int_regs_length(unsigned int count)
+{
+ return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
+}
+
+static void prepare_read_regs_int(struct zd_usb *usb,
+ struct usb_req_read_regs *req,
+ unsigned int count)
+{
+ struct zd_usb_interrupt *intr = &usb->intr;
+
+ spin_lock_irq(&intr->lock);
+ atomic_set(&intr->read_regs_enabled, 1);
+ intr->read_regs.req = req;
+ intr->read_regs.req_count = count;
+ reinit_completion(&intr->read_regs.completion);
+ spin_unlock_irq(&intr->lock);
+}
+
+static void disable_read_regs_int(struct zd_usb *usb)
+{
+ struct zd_usb_interrupt *intr = &usb->intr;
+
+ spin_lock_irq(&intr->lock);
+ atomic_set(&intr->read_regs_enabled, 0);
+ spin_unlock_irq(&intr->lock);
+}
+
+static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req,
+ unsigned int count)
+{
+ int i;
+ struct zd_usb_interrupt *intr = &usb->intr;
+ struct read_regs_int *rr = &intr->read_regs;
+ struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer;
+
+ /* The created block size seems to be larger than expected.
+ * However results appear to be correct.
+ */
+ if (rr->length < usb_int_regs_length(count)) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: actual length %d less than expected %d\n",
+ rr->length, usb_int_regs_length(count));
+ return false;
+ }
+
+ if (rr->length > sizeof(rr->buffer)) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: actual length %d exceeds buffer size %zu\n",
+ rr->length, sizeof(rr->buffer));
+ return false;
+ }
+
+ for (i = 0; i < count; i++) {
+ struct reg_data *rd = ®s->regs[i];
+ if (rd->addr != req->addr[i]) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "rd[%d] addr %#06hx expected %#06hx\n", i,
+ le16_to_cpu(rd->addr),
+ le16_to_cpu(req->addr[i]));
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static int get_results(struct zd_usb *usb, u16 *values,
+ struct usb_req_read_regs *req, unsigned int count,
+ bool *retry)
+{
+ int r;
+ int i;
+ struct zd_usb_interrupt *intr = &usb->intr;
+ struct read_regs_int *rr = &intr->read_regs;
+ struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer;
+
+ spin_lock_irq(&intr->lock);
+
+ r = -EIO;
+
+ /* Read failed because firmware bug? */
+ *retry = !!intr->read_regs_int_overridden;
+ if (*retry)
+ goto error_unlock;
+
+ if (!check_read_regs(usb, req, count)) {
+ dev_dbg_f(zd_usb_dev(usb), "error: invalid read regs\n");
+ goto error_unlock;
+ }
+
+ for (i = 0; i < count; i++) {
+ struct reg_data *rd = ®s->regs[i];
+ values[i] = le16_to_cpu(rd->value);
+ }
+
+ r = 0;
+error_unlock:
+ spin_unlock_irq(&intr->lock);
+ return r;
+}
+
+int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
+ const zd_addr_t *addresses, unsigned int count)
+{
+ int r, i, req_len, actual_req_len, try_count = 0;
+ struct usb_device *udev;
+ struct usb_req_read_regs *req = NULL;
+ unsigned long timeout;
+ bool retry = false;
+
+ if (count < 1) {
+ dev_dbg_f(zd_usb_dev(usb), "error: count is zero\n");
+ return -EINVAL;
+ }
+ if (count > USB_MAX_IOREAD16_COUNT) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: count %u exceeds possible max %u\n",
+ count, USB_MAX_IOREAD16_COUNT);
+ return -EINVAL;
+ }
+ if (in_atomic()) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: io in atomic context not supported\n");
+ return -EWOULDBLOCK;
+ }
+ if (!usb_int_enabled(usb)) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: usb interrupt not enabled\n");
+ return -EWOULDBLOCK;
+ }
+
+ ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+ BUILD_BUG_ON(sizeof(struct usb_req_read_regs) + USB_MAX_IOREAD16_COUNT *
+ sizeof(__le16) > sizeof(usb->req_buf));
+ BUG_ON(sizeof(struct usb_req_read_regs) + count * sizeof(__le16) >
+ sizeof(usb->req_buf));
+
+ req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16);
+ req = (void *)usb->req_buf;
+
+ req->id = cpu_to_le16(USB_REQ_READ_REGS);
+ for (i = 0; i < count; i++)
+ req->addr[i] = cpu_to_le16((u16)addresses[i]);
+
+retry_read:
+ try_count++;
+ udev = zd_usb_to_usbdev(usb);
+ prepare_read_regs_int(usb, req, count);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
+ goto error;
+ }
+ if (req_len != actual_req_len) {
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
+ " req_len %d != actual_req_len %d\n",
+ req_len, actual_req_len);
+ r = -EIO;
+ goto error;
+ }
+
+ timeout = wait_for_completion_timeout(&usb->intr.read_regs.completion,
+ msecs_to_jiffies(50));
+ if (!timeout) {
+ disable_read_regs_int(usb);
+ dev_dbg_f(zd_usb_dev(usb), "read timed out\n");
+ r = -ETIMEDOUT;
+ goto error;
+ }
+
+ r = get_results(usb, values, req, count, &retry);
+ if (retry && try_count < 20) {
+ dev_dbg_f(zd_usb_dev(usb), "read retry, tries so far: %d\n",
+ try_count);
+ goto retry_read;
+ }
+error:
+ return r;
+}
+
+static void iowrite16v_urb_complete(struct urb *urb)
+{
+ struct zd_usb *usb = urb->context;
+
+ if (urb->status && !usb->cmd_error)
+ usb->cmd_error = urb->status;
+
+ if (!usb->cmd_error &&
+ urb->actual_length != urb->transfer_buffer_length)
+ usb->cmd_error = -EIO;
+}
+
+static int zd_submit_waiting_urb(struct zd_usb *usb, bool last)
+{
+ int r = 0;
+ struct urb *urb = usb->urb_async_waiting;
+
+ if (!urb)
+ return 0;
+
+ usb->urb_async_waiting = NULL;
+
+ if (!last)
+ urb->transfer_flags |= URB_NO_INTERRUPT;
+
+ usb_anchor_urb(urb, &usb->submitted_cmds);
+ r = usb_submit_urb(urb, GFP_KERNEL);
+ if (r) {
+ usb_unanchor_urb(urb);
+ dev_dbg_f(zd_usb_dev(usb),
+ "error in usb_submit_urb(). Error number %d\n", r);
+ goto error;
+ }
+
+ /* fall-through with r == 0 */
+error:
+ usb_free_urb(urb);
+ return r;
+}
+
+void zd_usb_iowrite16v_async_start(struct zd_usb *usb)
+{
+ ZD_ASSERT(usb_anchor_empty(&usb->submitted_cmds));
+ ZD_ASSERT(usb->urb_async_waiting == NULL);
+ ZD_ASSERT(!usb->in_async);
+
+ ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+
+ usb->in_async = 1;
+ usb->cmd_error = 0;
+ usb->urb_async_waiting = NULL;
+}
+
+int zd_usb_iowrite16v_async_end(struct zd_usb *usb, unsigned int timeout)
+{
+ int r;
+
+ ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+ ZD_ASSERT(usb->in_async);
+
+ /* Submit last iowrite16v URB */
+ r = zd_submit_waiting_urb(usb, true);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error in zd_submit_waiting_usb(). "
+ "Error number %d\n", r);
+
+ usb_kill_anchored_urbs(&usb->submitted_cmds);
+ goto error;
+ }
+
+ if (timeout)
+ timeout = usb_wait_anchor_empty_timeout(&usb->submitted_cmds,
+ timeout);
+ if (!timeout) {
+ usb_kill_anchored_urbs(&usb->submitted_cmds);
+ if (usb->cmd_error == -ENOENT) {
+ dev_dbg_f(zd_usb_dev(usb), "timed out");
+ r = -ETIMEDOUT;
+ goto error;
+ }
+ }
+
+ r = usb->cmd_error;
+error:
+ usb->in_async = 0;
+ return r;
+}
+
+int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
+ unsigned int count)
+{
+ int r;
+ struct usb_device *udev;
+ struct usb_req_write_regs *req = NULL;
+ int i, req_len;
+ struct urb *urb;
+ struct usb_host_endpoint *ep;
+
+ ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+ ZD_ASSERT(usb->in_async);
+
+ if (count == 0)
+ return 0;
+ if (count > USB_MAX_IOWRITE16_COUNT) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: count %u exceeds possible max %u\n",
+ count, USB_MAX_IOWRITE16_COUNT);
+ return -EINVAL;
+ }
+ if (in_atomic()) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: io in atomic context not supported\n");
+ return -EWOULDBLOCK;
+ }
+
+ udev = zd_usb_to_usbdev(usb);
+
+ ep = usb_pipe_endpoint(udev, usb_sndintpipe(udev, EP_REGS_OUT));
+ if (!ep)
+ return -ENOENT;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+
+ req_len = sizeof(struct usb_req_write_regs) +
+ count * sizeof(struct reg_data);
+ req = kmalloc(req_len, GFP_KERNEL);
+ if (!req) {
+ r = -ENOMEM;
+ goto error;
+ }
+
+ req->id = cpu_to_le16(USB_REQ_WRITE_REGS);
+ for (i = 0; i < count; i++) {
+ struct reg_data *rw = &req->reg_writes[i];
+ rw->addr = cpu_to_le16((u16)ioreqs[i].addr);
+ rw->value = cpu_to_le16(ioreqs[i].value);
+ }
+
+ /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+ * endpoint is bulk. Select correct type URB by endpoint descriptor.
+ */
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb,
+ ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb);
+
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ /* Submit previous URB */
+ r = zd_submit_waiting_urb(usb, false);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error in zd_submit_waiting_usb(). "
+ "Error number %d\n", r);
+ goto error;
+ }
+
+ /* Delay submit so that URB_NO_INTERRUPT flag can be set for all URBs
+ * of currect batch except for very last.
+ */
+ usb->urb_async_waiting = urb;
+ return 0;
+error:
+ usb_free_urb(urb);
+ return r;
+}
+
+int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
+ unsigned int count)
+{
+ int r;
+
+ zd_usb_iowrite16v_async_start(usb);
+ r = zd_usb_iowrite16v_async(usb, ioreqs, count);
+ if (r) {
+ zd_usb_iowrite16v_async_end(usb, 0);
+ return r;
+ }
+ return zd_usb_iowrite16v_async_end(usb, 50 /* ms */);
+}
+
+int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
+{
+ int r;
+ struct usb_device *udev;
+ struct usb_req_rfwrite *req = NULL;
+ int i, req_len, actual_req_len;
+ u16 bit_value_template;
+
+ if (in_atomic()) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: io in atomic context not supported\n");
+ return -EWOULDBLOCK;
+ }
+ if (bits < USB_MIN_RFWRITE_BIT_COUNT) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: bits %d are smaller than"
+ " USB_MIN_RFWRITE_BIT_COUNT %d\n",
+ bits, USB_MIN_RFWRITE_BIT_COUNT);
+ return -EINVAL;
+ }
+ if (bits > USB_MAX_RFWRITE_BIT_COUNT) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: bits %d exceed USB_MAX_RFWRITE_BIT_COUNT %d\n",
+ bits, USB_MAX_RFWRITE_BIT_COUNT);
+ return -EINVAL;
+ }
+#ifdef DEBUG
+ if (value & (~0UL << bits)) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error: value %#09x has bits >= %d set\n",
+ value, bits);
+ return -EINVAL;
+ }
+#endif /* DEBUG */
+
+ dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits);
+
+ r = zd_usb_ioread16(usb, &bit_value_template, ZD_CR203);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error %d: Couldn't read ZD_CR203\n", r);
+ return r;
+ }
+ bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA);
+
+ ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
+ BUILD_BUG_ON(sizeof(struct usb_req_rfwrite) +
+ USB_MAX_RFWRITE_BIT_COUNT * sizeof(__le16) >
+ sizeof(usb->req_buf));
+ BUG_ON(sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16) >
+ sizeof(usb->req_buf));
+
+ req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16);
+ req = (void *)usb->req_buf;
+
+ req->id = cpu_to_le16(USB_REQ_WRITE_RF);
+ /* 1: 3683a, but not used in ZYDAS driver */
+ req->value = cpu_to_le16(2);
+ req->bits = cpu_to_le16(bits);
+
+ for (i = 0; i < bits; i++) {
+ u16 bv = bit_value_template;
+ if (value & (1 << (bits-1-i)))
+ bv |= RF_DATA;
+ req->bit_values[i] = cpu_to_le16(bv);
+ }
+
+ udev = zd_usb_to_usbdev(usb);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
+ goto out;
+ }
+ if (req_len != actual_req_len) {
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
+ " req_len %d != actual_req_len %d\n",
+ req_len, actual_req_len);
+ r = -EIO;
+ goto out;
+ }
+
+ /* FALL-THROUGH with r == 0 */
+out:
+ return r;
+}
Code Review / kvmfornfv.git / blobdiff