--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8821AE_PWRSEQ_H__
+#define __RTL8821AE_PWRSEQ_H__
+
+#include "../pwrseqcmd.h"
+#include "../btcoexist/halbt_precomp.h"
+
+#define RTL8812_TRANS_CARDEMU_TO_ACT_STEPS 15
+#define RTL8812_TRANS_ACT_TO_CARDEMU_STEPS 15
+#define RTL8812_TRANS_CARDEMU_TO_SUS_STEPS 15
+#define RTL8812_TRANS_SUS_TO_CARDEMU_STEPS 15
+#define RTL8812_TRANS_CARDEMU_TO_PDN_STEPS 25
+#define RTL8812_TRANS_PDN_TO_CARDEMU_STEPS 15
+#define RTL8812_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8812_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8812_TRANS_END_STEPS 1
+
+/* The following macros have the following format:
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * comments },
+ */
+#define RTL8812_TRANS_CARDEMU_TO_ACT \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
+ /* disable SW LPS 0x04[10]=0*/}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1 \
+ /* wait till 0x04[17] = 1 power ready*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
+ /* disable HWPDN 0x04[15]=0*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
+ /* disable WL suspend*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /* polling until return 0*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0},
+
+#define RTL8812_TRANS_ACT_TO_CARDEMU \
+ {0x0c00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
+ /* 0xc00[7:0] = 4 turn off 3-wire */}, \
+ {0x0e00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
+ /* 0xe00[7:0] = 4 turn off 3-wire */}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /* 0x2[0] = 0 RESET BB, CLOSE RF */}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
+ /*Delay 1us*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /* Whole BB is reset*/}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x2A \
+ /* 0x07[7:0] = 0x28 sps pwm mode 0x2a for BT coex*/}, \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
+ /*0x8[1] = 0 ANA clk =500k */}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0 \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/},
+
+#define RTL8812_TRANS_CARDEMU_TO_SUS \
+ {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xc0}, \
+ {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xE0}, \
+ {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x07 \
+ /* gpio11 input mode, gpio10~8 output mode */}, \
+ {0x0045, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio 0~7 output same value as input ?? */}, \
+ {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xff \
+ /* gpio0~7 output mode */}, \
+ {0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /* 0x47[7:0] = 00 gpio mode */}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /* suspend option all off */}, \
+ {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, BIT7 \
+ /*0x14[7] = 1 turn on ZCD */}, \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, BIT0 \
+ /* 0x15[0] =1 trun on ZCD */}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, BIT4 \
+ /*0x23[4] = 1 hpon LDO sleep mode */}, \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
+ /*0x8[1] = 0 ANA clk =500k */}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, BIT3 \
+ /*0x04[11] = 2b'11 enable WL suspend for PCIe*/},
+
+#define RTL8812_TRANS_SUS_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
+ /*0x04[11] = 2b'01enable WL suspend*/}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, 0 \
+ /*0x23[4] = 0 hpon LDO sleep mode leave */}, \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
+ /* 0x15[0] =0 trun off ZCD */}, \
+ {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, 0 \
+ /*0x14[7] = 0 turn off ZCD */}, \
+ {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio0~7 input mode */}, \
+ {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio11 input mode, gpio10~8 input mode */},
+
+#define RTL8812_TRANS_CARDEMU_TO_CARDDIS \
+ {0x0003, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
+ /*0x03[2] = 0, reset 8051*/}, \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x05 \
+ /*0x80=05h if reload fw, fill the default value of host_CPU handshake field*/}, \
+ {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xcc}, \
+ {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xEC}, \
+ {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x07 \
+ /* gpio11 input mode, gpio10~8 output mode */}, \
+ {0x0045, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio 0~7 output same value as input ?? */}, \
+ {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xff \
+ /* gpio0~7 output mode */}, \
+ {0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /* 0x47[7:0] = 00 gpio mode */}, \
+ {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, BIT7 \
+ /*0x14[7] = 1 turn on ZCD */}, \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, BIT0 \
+ /* 0x15[0] =1 trun on ZCD */}, \
+ {0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
+ /*0x12[0] = 0 force PFM mode */}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, BIT4 \
+ /*0x23[4] = 1 hpon LDO sleep mode */}, \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
+ /*0x8[1] = 0 ANA clk =500k */}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
+ /*0x07=0x20 , SOP option to disable BG/MB*/}, \
+ {0x001f, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*0x01f[1]=0 , disable RFC_0 control REG_RF_CTRL_8812 */}, \
+ {0x0076, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*0x076[1]=0 , disable RFC_1 control REG_OPT_CTRL_8812 +2 */}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, BIT3 \
+ /*0x04[11] = 2b'01 enable WL suspend*/},
+
+#define RTL8812_TRANS_CARDDIS_TO_CARDEMU \
+ {0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*0x12[0] = 1 force PWM mode */}, \
+ {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, 0 \
+ /*0x14[7] = 0 turn off ZCD */}, \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
+ /* 0x15[0] =0 trun off ZCD */}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, 0 \
+ /*0x23[4] = 0 hpon LDO leave sleep mode */}, \
+ {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio0~7 input mode */}, \
+ {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /* gpio11 input mode, gpio10~8 input mode */}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
+ /*0x04[10] = 0, enable SW LPS PCIE only*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
+ /*0x04[11] = 2b'01enable WL suspend*/}, \
+ {0x0003, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, BIT2 \
+ /*0x03[2] = 1, enable 8051*/}, \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*PCIe DMA start*/},
+
+#define RTL8812_TRANS_CARDEMU_TO_PDN \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7 \
+ /* 0x04[15] = 1*/},
+
+#define RTL8812_TRANS_PDN_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
+ /* 0x04[15] = 0*/},
+
+#define RTL8812_TRANS_ACT_TO_LPS \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*PCIe DMA stop*/}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F \
+ /*Tx Pause*/}, \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x0c00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
+ /* 0xc00[7:0] = 4 turn off 3-wire */}, \
+ {0x0e00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
+ /* 0xe00[7:0] = 4 turn off 3-wire */}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /*CCK and OFDM are disabled,and clock are gated,and RF closed*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
+ /*Delay 1us*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /* Whole BB is reset*/}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03 \
+ /*Reset MAC TRX*/}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*check if removed later*/}, \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
+ /*Respond TxOK to scheduler*/},
+
+#define RTL8812_TRANS_LPS_TO_ACT \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*SDIO RPWM*/}, \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*USB RPWM*/}, \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*PCIe RPWM*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \
+ /*Delay*/}, \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
+ /*. 0x08[4] = 0 switch TSF to 40M*/}, \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0 \
+ /*Polling 0x109[7]=0 TSF in 40M*/}, \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0 \
+ /*. 0x29[7:6] = 2b'00 enable BB clock*/}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*. 0x101[1] = 1*/}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*. 0x100[7:0] = 0xFF enable WMAC TRX*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0 \
+ /*. 0x02[1:0] = 2b'11 enable BB macro*/}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*. 0x522 = 0*/},
+
+#define RTL8812_TRANS_END \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ 0, PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8812_power_on_flow
+ [RTL8812_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_radio_off_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_card_disable_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_card_enable_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_suspend_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_resume_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_hwpdn_flow
+ [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_enter_lps_flow
+ [RTL8812_TRANS_ACT_TO_LPS_STEPS +
+ RTL8812_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8812_leave_lps_flow
+ [RTL8812_TRANS_LPS_TO_ACT_STEPS +
+ RTL8812_TRANS_END_STEPS];
+
+/* Check document WM-20130516-JackieLau-RTL8821A_Power_Architecture-R10.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transision from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ */
+#define RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS 25
+#define RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS 15
+#define RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS 15
+#define RTL8821A_TRANS_SUS_TO_CARDEMU_STEPS 15
+#define RTL8821A_TRANS_CARDDIS_TO_CARDEMU_STEPS 15
+#define RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS 15
+#define RTL8821A_TRANS_PDN_TO_CARDEMU_STEPS 15
+#define RTL8821A_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8821A_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8821A_TRANS_END_STEPS 1
+
+#define RTL8821A_TRANS_CARDEMU_TO_ACT \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*0x20[0] = 1b'1 enable LDOA12 MACRO block for all interface*/}, \
+ {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
+ /*0x67[0] = 0 to disable BT_GPS_SEL pins*/}, \
+ {0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS \
+ /*Delay 1ms*/}, \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, 0 \
+ /*0x00[5] = 1b'0 release analog Ips to digital ,1:isolation*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT4|BIT3|BIT2), 0 \
+ /* disable SW LPS 0x04[10]=0 and WLSUS_EN 0x04[12:11]=0*/}, \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0 , BIT0 \
+ /* Disable USB suspend */}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1 \
+ /* wait till 0x04[17] = 1 power ready*/}, \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0 , 0 \
+ /* Enable USB suspend */}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /* release WLON reset 0x04[16]=1*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
+ /* disable HWPDN 0x04[15]=0*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT4|BIT3), 0 \
+ /* disable WL suspend*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /* polling until return 0*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0 \
+ /**/}, \
+ {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*0x4C[24] = 0x4F[0] = 1, switch DPDT_SEL_P output from WL BB */},\
+ {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT5|BIT4), (BIT5|BIT4) \
+ /*0x66[13] = 0x67[5] = 1, switch for PAPE_G/PAPE_A \
+ from WL BB ; 0x66[12] = 0x67[4] = 1, switch LNAON from WL BB */},\
+ {0x0025, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6, 0 \
+ /*anapar_mac<118> , 0x25[6]=0 by wlan single function*/},\
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*Enable falling edge triggering interrupt*/},\
+ {0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*Enable GPIO9 interrupt mode*/},\
+ {0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*Enable GPIO9 input mode*/},\
+ {0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*Enable HSISR GPIO[C:0] interrupt*/},\
+ {0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*Enable HSISR GPIO9 interrupt*/},\
+ {0x007A, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3A \
+ /*0x7A = 0x3A start BT*/},\
+ {0x002E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF , 0x82 \
+ /* 0x2C[23:12]=0x820 ; XTAL trim */}, \
+ {0x0010, PWR_CUT_A_MSK , PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6 , BIT6 \
+ /* 0x10[6]=1 */},
+
+#define RTL8821A_TRANS_ACT_TO_CARDEMU \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*0x1F[7:0] = 0 turn off RF*/}, \
+ {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /*0x4C[24] = 0x4F[0] = 0, switch DPDT_SEL_P output from \
+ register 0x65[2] */},\
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*Enable rising edge triggering interrupt*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0 \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/}, \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
+ /*0x00[5] = 1b'1 analog Ips to digital ,1:isolation*/}, \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /*0x20[0] = 1b'0 disable LDOA12 MACRO block*/},
+
+#define RTL8821A_TRANS_CARDEMU_TO_SUS \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, (BIT4|BIT3) \
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3 \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
+ /*0x07[7:0] = 0x20 SDIO SOP option to disable BG/MB/ACK/SWR*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4 \
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*Set SDIO suspend local register*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0 \
+ /*wait power state to suspend*/},
+
+#define RTL8821A_TRANS_SUS_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3 | BIT7, 0 \
+ /*clear suspend enable and power down enable*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0 \
+ /*Set SDIO suspend local register*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1 \
+ /*wait power state to suspend*/},\
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
+ /*0x23[4] = 1b'0 12H LDO enter normal mode*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0 \
+ /*0x04[12:11] = 2b'01enable WL suspend*/},
+
+#define RTL8821A_TRANS_CARDEMU_TO_CARDDIS \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
+ /*0x07=0x20 , SOP option to disable BG/MB*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3 \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, BIT2 \
+ /*0x04[10] = 1, enable SW LPS*/}, \
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 1 \
+ /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0 \
+ /*Set SDIO suspend local register*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0 \
+ /*wait power state to suspend*/},
+
+#define RTL8821A_TRANS_CARDDIS_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3 | BIT7, 0 \
+ /*clear suspend enable and power down enable*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0 \
+ /*Set SDIO suspend local register*/}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1 \
+ /*wait power state to suspend*/},\
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0 \
+ /*0x04[12:11] = 2b'01enable WL suspend*/},\
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
+ /*0x23[4] = 1b'0 12H LDO enter normal mode*/}, \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*PCIe DMA start*/},
+
+#define RTL8821A_TRANS_CARDEMU_TO_PDN \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
+ /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_SDIO_MSK|PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
+ /*0x07[7:0] = 0x20 SOP option to disable BG/MB/ACK/SWR*/}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /* 0x04[16] = 0*/},\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7 \
+ /* 0x04[15] = 1*/},
+
+#define RTL8821A_TRANS_PDN_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
+ /* 0x04[15] = 0*/},
+
+#define RTL8821A_TRANS_ACT_TO_LPS \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*PCIe DMA stop*/}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*Tx Pause*/}, \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
+ /*CCK and OFDM are disabled,and clock are gated*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
+ /*Delay 1us*/}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*Whole BB is reset*/}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03 \
+ /*Reset MAC TRX*/}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
+ /*check if removed later*/}, \
+ {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
+ /*When driver enter Sus/ Disable, enable LOP for BT*/}, \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
+ /*Respond TxOK to scheduler*/},
+
+#define RTL8821A_TRANS_LPS_TO_ACT \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*SDIO RPWM*/},\
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*USB RPWM*/},\
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*PCIe RPWM*/},\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \
+ /*Delay*/},\
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
+ /*. 0x08[4] = 0 switch TSF to 40M*/},\
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0 \
+ /*Polling 0x109[7]=0 TSF in 40M*/},\
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0 \
+ /*. 0x29[7:6] = 2b'00 enable BB clock*/},\
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
+ /*. 0x101[1] = 1*/},\
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*. 0x100[7:0] = 0xFF enable WMAC TRX*/},\
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0 \
+ /*. 0x02[1:0] = 2b'11 enable BB macro*/},\
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*. 0x522 = 0*/},
+
+#define RTL8821A_TRANS_END \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ 0, PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8821A_power_on_flow
+ [RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_radio_off_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_card_disable_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_card_enable_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_suspend_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_resume_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_hwpdn_flow
+ [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_enter_lps_flow
+ [RTL8821A_TRANS_ACT_TO_LPS_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8821A_leave_lps_flow
+ [RTL8821A_TRANS_LPS_TO_ACT_STEPS +
+ RTL8821A_TRANS_END_STEPS];
+
+/*RTL8812 Power Configuration CMDs for PCIe interface*/
+#define RTL8812_NIC_PWR_ON_FLOW rtl8812_power_on_flow
+#define RTL8812_NIC_RF_OFF_FLOW rtl8812_radio_off_flow
+#define RTL8812_NIC_DISABLE_FLOW rtl8812_card_disable_flow
+#define RTL8812_NIC_ENABLE_FLOW rtl8812_card_enable_flow
+#define RTL8812_NIC_SUSPEND_FLOW rtl8812_suspend_flow
+#define RTL8812_NIC_RESUME_FLOW rtl8812_resume_flow
+#define RTL8812_NIC_PDN_FLOW rtl8812_hwpdn_flow
+#define RTL8812_NIC_LPS_ENTER_FLOW rtl8812_enter_lps_flow
+#define RTL8812_NIC_LPS_LEAVE_FLOW rtl8812_leave_lps_flow
+
+/* RTL8821 Power Configuration CMDs for PCIe interface */
+#define RTL8821A_NIC_PWR_ON_FLOW rtl8821A_power_on_flow
+#define RTL8821A_NIC_RF_OFF_FLOW rtl8821A_radio_off_flow
+#define RTL8821A_NIC_DISABLE_FLOW rtl8821A_card_disable_flow
+#define RTL8821A_NIC_ENABLE_FLOW rtl8821A_card_enable_flow
+#define RTL8821A_NIC_SUSPEND_FLOW rtl8821A_suspend_flow
+#define RTL8821A_NIC_RESUME_FLOW rtl8821A_resume_flow
+#define RTL8821A_NIC_PDN_FLOW rtl8821A_hwpdn_flow
+#define RTL8821A_NIC_LPS_ENTER_FLOW rtl8821A_enter_lps_flow
+#define RTL8821A_NIC_LPS_LEAVE_FLOW rtl8821A_leave_lps_flow
+
+#endif
Code Review / kvmfornfv.git / blobdiff