+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2009-2010 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@realtek.com>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- *****************************************************************************/
-
-#ifndef __RTL8821AE_PWRSEQ_H__
-#define __RTL8821AE_PWRSEQ_H__
-
-#include "../pwrseqcmd.h"
-#include "../btcoexist/halbt_precomp.h"
-
-#define RTL8812_TRANS_CARDEMU_TO_ACT_STEPS 15
-#define RTL8812_TRANS_ACT_TO_CARDEMU_STEPS 15
-#define RTL8812_TRANS_CARDEMU_TO_SUS_STEPS 15
-#define RTL8812_TRANS_SUS_TO_CARDEMU_STEPS 15
-#define RTL8812_TRANS_CARDEMU_TO_PDN_STEPS 25
-#define RTL8812_TRANS_PDN_TO_CARDEMU_STEPS 15
-#define RTL8812_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8812_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8812_TRANS_END_STEPS 1
-
-/* The following macros have the following format:
- * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
- * comments },
- */
-#define RTL8812_TRANS_CARDEMU_TO_ACT \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
- /* disable SW LPS 0x04[10]=0*/}, \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1 \
- /* wait till 0x04[17] = 1 power ready*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
- /* disable HWPDN 0x04[15]=0*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
- /* disable WL suspend*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /* polling until return 0*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0},
-
-#define RTL8812_TRANS_ACT_TO_CARDEMU \
- {0x0c00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
- /* 0xc00[7:0] = 4 turn off 3-wire */}, \
- {0x0e00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
- /* 0xe00[7:0] = 4 turn off 3-wire */}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /* 0x2[0] = 0 RESET BB, CLOSE RF */}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
- /*Delay 1us*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /* Whole BB is reset*/}, \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x2A \
- /* 0x07[7:0] = 0x28 sps pwm mode 0x2a for BT coex*/}, \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
- /*0x8[1] = 0 ANA clk =500k */}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*0x04[9] = 1 turn off MAC by HW state machine*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0 \
- /*wait till 0x04[9] = 0 polling until return 0 to disable*/},
-
-#define RTL8812_TRANS_CARDEMU_TO_SUS \
- {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xc0}, \
- {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xE0}, \
- {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x07 \
- /* gpio11 input mode, gpio10~8 output mode */}, \
- {0x0045, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio 0~7 output same value as input ?? */}, \
- {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xff \
- /* gpio0~7 output mode */}, \
- {0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /* 0x47[7:0] = 00 gpio mode */}, \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /* suspend option all off */}, \
- {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, BIT7 \
- /*0x14[7] = 1 turn on ZCD */}, \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, BIT0 \
- /* 0x15[0] =1 trun on ZCD */}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, BIT4 \
- /*0x23[4] = 1 hpon LDO sleep mode */}, \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
- /*0x8[1] = 0 ANA clk =500k */}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, BIT3 \
- /*0x04[11] = 2b'11 enable WL suspend for PCIe*/},
-
-#define RTL8812_TRANS_SUS_TO_CARDEMU \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
- /*0x04[11] = 2b'01enable WL suspend*/}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, 0 \
- /*0x23[4] = 0 hpon LDO sleep mode leave */}, \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
- /* 0x15[0] =0 trun off ZCD */}, \
- {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, 0 \
- /*0x14[7] = 0 turn off ZCD */}, \
- {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio0~7 input mode */}, \
- {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio11 input mode, gpio10~8 input mode */},
-
-#define RTL8812_TRANS_CARDEMU_TO_CARDDIS \
- {0x0003, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
- /*0x03[2] = 0, reset 8051*/}, \
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x05 \
- /*0x80=05h if reload fw, fill the default value of host_CPU handshake field*/}, \
- {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xcc}, \
- {0x0042, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xF0, 0xEC}, \
- {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x07 \
- /* gpio11 input mode, gpio10~8 output mode */}, \
- {0x0045, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio 0~7 output same value as input ?? */}, \
- {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xff \
- /* gpio0~7 output mode */}, \
- {0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /* 0x47[7:0] = 00 gpio mode */}, \
- {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, BIT7 \
- /*0x14[7] = 1 turn on ZCD */}, \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, BIT0 \
- /* 0x15[0] =1 trun on ZCD */}, \
- {0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
- /*0x12[0] = 0 force PFM mode */}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, BIT4 \
- /*0x23[4] = 1 hpon LDO sleep mode */}, \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x02, 0 \
- /*0x8[1] = 0 ANA clk =500k */}, \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
- /*0x07=0x20 , SOP option to disable BG/MB*/}, \
- {0x001f, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*0x01f[1]=0 , disable RFC_0 control REG_RF_CTRL_8812 */}, \
- {0x0076, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*0x076[1]=0 , disable RFC_1 control REG_OPT_CTRL_8812 +2 */}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, BIT3 \
- /*0x04[11] = 2b'01 enable WL suspend*/},
-
-#define RTL8812_TRANS_CARDDIS_TO_CARDEMU \
- {0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /*0x12[0] = 1 force PWM mode */}, \
- {0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x80, 0 \
- /*0x14[7] = 0 turn off ZCD */}, \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x01, 0 \
- /* 0x15[0] =0 trun off ZCD */}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0x10, 0 \
- /*0x23[4] = 0 hpon LDO leave sleep mode */}, \
- {0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio0~7 input mode */}, \
- {0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /* gpio11 input mode, gpio10~8 input mode */}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, 0 \
- /*0x04[10] = 0, enable SW LPS PCIE only*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3, 0 \
- /*0x04[11] = 2b'01enable WL suspend*/}, \
- {0x0003, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, BIT2 \
- /*0x03[2] = 1, enable 8051*/}, \
- {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /*PCIe DMA start*/},
-
-#define RTL8812_TRANS_CARDEMU_TO_PDN \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7 \
- /* 0x04[15] = 1*/},
-
-#define RTL8812_TRANS_PDN_TO_CARDEMU \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
- /* 0x04[15] = 0*/},
-
-#define RTL8812_TRANS_ACT_TO_LPS \
- {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
- /*PCIe DMA stop*/}, \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F \
- /*Tx Pause*/}, \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x0c00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
- /* 0xc00[7:0] = 4 turn off 3-wire */}, \
- {0x0e00, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x04 \
- /* 0xe00[7:0] = 4 turn off 3-wire */}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /*CCK and OFDM are disabled,and clock are gated,and RF closed*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
- /*Delay 1us*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /* Whole BB is reset*/}, \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03 \
- /*Reset MAC TRX*/}, \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*check if removed later*/}, \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
- /*Respond TxOK to scheduler*/},
-
-#define RTL8812_TRANS_LPS_TO_ACT \
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*SDIO RPWM*/}, \
- {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*USB RPWM*/}, \
- {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*PCIe RPWM*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \
- /*Delay*/}, \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
- /*. 0x08[4] = 0 switch TSF to 40M*/}, \
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0 \
- /*Polling 0x109[7]=0 TSF in 40M*/}, \
- {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0 \
- /*. 0x29[7:6] = 2b'00 enable BB clock*/}, \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*. 0x101[1] = 1*/}, \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
- /*. 0x100[7:0] = 0xFF enable WMAC TRX*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0 \
- /*. 0x02[1:0] = 2b'11 enable BB macro*/}, \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /*. 0x522 = 0*/},
-
-#define RTL8812_TRANS_END \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- 0, PWR_CMD_END, 0, 0},
-
-extern struct wlan_pwr_cfg rtl8812_power_on_flow
- [RTL8812_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_radio_off_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_card_disable_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_card_enable_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_suspend_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_resume_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_hwpdn_flow
- [RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_enter_lps_flow
- [RTL8812_TRANS_ACT_TO_LPS_STEPS +
- RTL8812_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8812_leave_lps_flow
- [RTL8812_TRANS_LPS_TO_ACT_STEPS +
- RTL8812_TRANS_END_STEPS];
-
-/* Check document WM-20130516-JackieLau-RTL8821A_Power_Architecture-R10.vsd
- * There are 6 HW Power States:
- * 0: POFF--Power Off
- * 1: PDN--Power Down
- * 2: CARDEMU--Card Emulation
- * 3: ACT--Active Mode
- * 4: LPS--Low Power State
- * 5: SUS--Suspend
- *
- * The transision from different states are defined below
- * TRANS_CARDEMU_TO_ACT
- * TRANS_ACT_TO_CARDEMU
- * TRANS_CARDEMU_TO_SUS
- * TRANS_SUS_TO_CARDEMU
- * TRANS_CARDEMU_TO_PDN
- * TRANS_ACT_TO_LPS
- * TRANS_LPS_TO_ACT
- *
- * TRANS_END
- */
-#define RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS 25
-#define RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS 15
-#define RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS 15
-#define RTL8821A_TRANS_SUS_TO_CARDEMU_STEPS 15
-#define RTL8821A_TRANS_CARDDIS_TO_CARDEMU_STEPS 15
-#define RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS 15
-#define RTL8821A_TRANS_PDN_TO_CARDEMU_STEPS 15
-#define RTL8821A_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8821A_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8821A_TRANS_END_STEPS 1
-
-#define RTL8821A_TRANS_CARDEMU_TO_ACT \
- {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /*0x20[0] = 1b'1 enable LDOA12 MACRO block for all interface*/}, \
- {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
- /*0x67[0] = 0 to disable BT_GPS_SEL pins*/}, \
- {0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS \
- /*Delay 1ms*/}, \
- {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, 0 \
- /*0x00[5] = 1b'0 release analog Ips to digital ,1:isolation*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT4|BIT3|BIT2), 0 \
- /* disable SW LPS 0x04[10]=0 and WLSUS_EN 0x04[12:11]=0*/}, \
- {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0 , BIT0 \
- /* Disable USB suspend */}, \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1 \
- /* wait till 0x04[17] = 1 power ready*/}, \
- {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0 , 0 \
- /* Enable USB suspend */}, \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /* release WLON reset 0x04[16]=1*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
- /* disable HWPDN 0x04[15]=0*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT4|BIT3), 0 \
- /* disable WL suspend*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /* polling until return 0*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0 \
- /**/}, \
- {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /*0x4C[24] = 0x4F[0] = 1, switch DPDT_SEL_P output from WL BB */},\
- {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT5|BIT4), (BIT5|BIT4) \
- /*0x66[13] = 0x67[5] = 1, switch for PAPE_G/PAPE_A \
- from WL BB ; 0x66[12] = 0x67[4] = 1, switch LNAON from WL BB */},\
- {0x0025, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6, 0 \
- /*anapar_mac<118> , 0x25[6]=0 by wlan single function*/},\
- {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*Enable falling edge triggering interrupt*/},\
- {0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*Enable GPIO9 interrupt mode*/},\
- {0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*Enable GPIO9 input mode*/},\
- {0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0 \
- /*Enable HSISR GPIO[C:0] interrupt*/},\
- {0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*Enable HSISR GPIO9 interrupt*/},\
- {0x007A, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3A \
- /*0x7A = 0x3A start BT*/},\
- {0x002E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF , 0x82 \
- /* 0x2C[23:12]=0x820 ; XTAL trim */}, \
- {0x0010, PWR_CUT_A_MSK , PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6 , BIT6 \
- /* 0x10[6]=1 */},
-
-#define RTL8821A_TRANS_ACT_TO_CARDEMU \
- {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /*0x1F[7:0] = 0 turn off RF*/}, \
- {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /*0x4C[24] = 0x4F[0] = 0, switch DPDT_SEL_P output from \
- register 0x65[2] */},\
- {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*Enable rising edge triggering interrupt*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*0x04[9] = 1 turn off MAC by HW state machine*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0 \
- /*wait till 0x04[9] = 0 polling until return 0 to disable*/}, \
- {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
- /*0x00[5] = 1b'1 analog Ips to digital ,1:isolation*/}, \
- {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /*0x20[0] = 1b'0 disable LDOA12 MACRO block*/},
-
-#define RTL8821A_TRANS_CARDEMU_TO_SUS \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, (BIT4|BIT3) \
- /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3 \
- /*0x04[12:11] = 2b'01 enable WL suspend*/}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
- /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
- /*0x07[7:0] = 0x20 SDIO SOP option to disable BG/MB/ACK/SWR*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4 \
- /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0 \
- /*Set SDIO suspend local register*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0 \
- /*wait power state to suspend*/},
-
-#define RTL8821A_TRANS_SUS_TO_CARDEMU \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3 | BIT7, 0 \
- /*clear suspend enable and power down enable*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0 \
- /*Set SDIO suspend local register*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1 \
- /*wait power state to suspend*/},\
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
- /*0x23[4] = 1b'0 12H LDO enter normal mode*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0 \
- /*0x04[12:11] = 2b'01enable WL suspend*/},
-
-#define RTL8821A_TRANS_CARDEMU_TO_CARDDIS \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
- /*0x07=0x20 , SOP option to disable BG/MB*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3 \
- /*0x04[12:11] = 2b'01 enable WL suspend*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, BIT2 \
- /*0x04[10] = 1, enable SW LPS*/}, \
- {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 1 \
- /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/}, \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
- /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0 \
- /*Set SDIO suspend local register*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0 \
- /*wait power state to suspend*/},
-
-#define RTL8821A_TRANS_CARDDIS_TO_CARDEMU \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3 | BIT7, 0 \
- /*clear suspend enable and power down enable*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0 \
- /*Set SDIO suspend local register*/}, \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1 \
- /*wait power state to suspend*/},\
- {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/}, \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0 \
- /*0x04[12:11] = 2b'01enable WL suspend*/},\
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
- /*0x23[4] = 1b'0 12H LDO enter normal mode*/}, \
- {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /*PCIe DMA start*/},
-
-#define RTL8821A_TRANS_CARDEMU_TO_PDN \
- {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4 \
- /*0x23[4] = 1b'1 12H LDO enter sleep mode*/}, \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_SDIO_MSK|PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20 \
- /*0x07[7:0] = 0x20 SOP option to disable BG/MB/ACK/SWR*/}, \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /* 0x04[16] = 0*/},\
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7 \
- /* 0x04[15] = 1*/},
-
-#define RTL8821A_TRANS_PDN_TO_CARDEMU \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0 \
- /* 0x04[15] = 0*/},
-
-#define RTL8821A_TRANS_ACT_TO_LPS \
- {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
- /*PCIe DMA stop*/}, \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
- /*Tx Pause*/}, \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
- /*Should be zero if no packet is transmitting*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0 \
- /*CCK and OFDM are disabled,and clock are gated*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
- /*Delay 1us*/}, \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*Whole BB is reset*/}, \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03 \
- /*Reset MAC TRX*/}, \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0 \
- /*check if removed later*/}, \
- {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00 \
- /*When driver enter Sus/ Disable, enable LOP for BT*/}, \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5 \
- /*Respond TxOK to scheduler*/},
-
-#define RTL8821A_TRANS_LPS_TO_ACT \
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*SDIO RPWM*/},\
- {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*USB RPWM*/},\
- {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
- /*PCIe RPWM*/},\
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \
- /*Delay*/},\
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0 \
- /*. 0x08[4] = 0 switch TSF to 40M*/},\
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0 \
- /*Polling 0x109[7]=0 TSF in 40M*/},\
- {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0 \
- /*. 0x29[7:6] = 2b'00 enable BB clock*/},\
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1 \
- /*. 0x101[1] = 1*/},\
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
- /*. 0x100[7:0] = 0xFF enable WMAC TRX*/},\
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0 \
- /*. 0x02[1:0] = 2b'11 enable BB macro*/},\
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
- /*. 0x522 = 0*/},
-
-#define RTL8821A_TRANS_END \
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- 0, PWR_CMD_END, 0, 0},
-
-extern struct wlan_pwr_cfg rtl8821A_power_on_flow
- [RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_radio_off_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_card_disable_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_card_enable_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_suspend_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_resume_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_hwpdn_flow
- [RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_enter_lps_flow
- [RTL8821A_TRANS_ACT_TO_LPS_STEPS +
- RTL8821A_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8821A_leave_lps_flow
- [RTL8821A_TRANS_LPS_TO_ACT_STEPS +
- RTL8821A_TRANS_END_STEPS];
-
-/*RTL8812 Power Configuration CMDs for PCIe interface*/
-#define RTL8812_NIC_PWR_ON_FLOW rtl8812_power_on_flow
-#define RTL8812_NIC_RF_OFF_FLOW rtl8812_radio_off_flow
-#define RTL8812_NIC_DISABLE_FLOW rtl8812_card_disable_flow
-#define RTL8812_NIC_ENABLE_FLOW rtl8812_card_enable_flow
-#define RTL8812_NIC_SUSPEND_FLOW rtl8812_suspend_flow
-#define RTL8812_NIC_RESUME_FLOW rtl8812_resume_flow
-#define RTL8812_NIC_PDN_FLOW rtl8812_hwpdn_flow
-#define RTL8812_NIC_LPS_ENTER_FLOW rtl8812_enter_lps_flow
-#define RTL8812_NIC_LPS_LEAVE_FLOW rtl8812_leave_lps_flow
-
-/* RTL8821 Power Configuration CMDs for PCIe interface */
-#define RTL8821A_NIC_PWR_ON_FLOW rtl8821A_power_on_flow
-#define RTL8821A_NIC_RF_OFF_FLOW rtl8821A_radio_off_flow
-#define RTL8821A_NIC_DISABLE_FLOW rtl8821A_card_disable_flow
-#define RTL8821A_NIC_ENABLE_FLOW rtl8821A_card_enable_flow
-#define RTL8821A_NIC_SUSPEND_FLOW rtl8821A_suspend_flow
-#define RTL8821A_NIC_RESUME_FLOW rtl8821A_resume_flow
-#define RTL8821A_NIC_PDN_FLOW rtl8821A_hwpdn_flow
-#define RTL8821A_NIC_LPS_ENTER_FLOW rtl8821A_enter_lps_flow
-#define RTL8821A_NIC_LPS_LEAVE_FLOW rtl8821A_leave_lps_flow
-
-#endif
Code Review / kvmfornfv.git / blobdiff