--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ switch (variable) {
+ case HW_VAR_RCR: {
+ *((u32 *) (val)) = rtlpci->receive_config;
+ break;
+ }
+ case HW_VAR_RF_STATE: {
+ *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ *((bool *) (val)) = ppsc->fw_current_inpsmode;
+ break;
+ }
+ case HW_VAR_CORRECT_TSF: {
+ u64 tsf;
+ u32 *ptsf_low = (u32 *)&tsf;
+ u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+ *ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
+ *ptsf_low = rtl_read_dword(rtlpriv, TSFR);
+
+ *((u64 *) (val)) = tsf;
+
+ break;
+ }
+ case HW_VAR_MRC: {
+ *((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
+ break;
+ }
+ default: {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ }
+}
+
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ switch (variable) {
+ case HW_VAR_ETHER_ADDR:{
+ rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_BASIC_RATE:{
+ u16 rate_cfg = ((u16 *) val)[0];
+ u8 rate_index = 0;
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rate_cfg = rate_cfg & 0x150;
+ else
+ rate_cfg = rate_cfg & 0x15f;
+
+ rate_cfg |= 0x01;
+
+ rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1,
+ (rate_cfg >> 8) & 0xff);
+
+ while (rate_cfg > 0x1) {
+ rate_cfg = (rate_cfg >> 1);
+ rate_index++;
+ }
+ rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
+
+ break;
+ }
+ case HW_VAR_BSSID:{
+ rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
+ rtl_write_word(rtlpriv, BSSIDR + 4,
+ ((u16 *)(val + 4))[0]);
+ break;
+ }
+ case HW_VAR_SIFS:{
+ rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
+ rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
+ break;
+ }
+ case HW_VAR_SLOT_TIME:{
+ u8 e_aci;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "HW_VAR_SLOT_TIME %x\n", val[0]);
+
+ rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
+
+ for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_AC_PARAM,
+ (&e_aci));
+ }
+ break;
+ }
+ case HW_VAR_ACK_PREAMBLE:{
+ u8 reg_tmp;
+ u8 short_preamble = (bool) (*val);
+ reg_tmp = (mac->cur_40_prime_sc) << 5;
+ if (short_preamble)
+ reg_tmp |= 0x80;
+
+ rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
+ break;
+ }
+ case HW_VAR_AMPDU_MIN_SPACE:{
+ u8 min_spacing_to_set;
+ u8 sec_min_space;
+
+ min_spacing_to_set = *val;
+ if (min_spacing_to_set <= 7) {
+ if (rtlpriv->sec.pairwise_enc_algorithm ==
+ NO_ENCRYPTION)
+ sec_min_space = 0;
+ else
+ sec_min_space = 1;
+
+ if (min_spacing_to_set < sec_min_space)
+ min_spacing_to_set = sec_min_space;
+ if (min_spacing_to_set > 5)
+ min_spacing_to_set = 5;
+
+ mac->min_space_cfg =
+ ((mac->min_space_cfg & 0xf8) |
+ min_spacing_to_set);
+
+ *val = min_spacing_to_set;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+ mac->min_space_cfg);
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+ }
+ break;
+ }
+ case HW_VAR_SHORTGI_DENSITY:{
+ u8 density_to_set;
+
+ density_to_set = *val;
+ mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+ mac->min_space_cfg |= (density_to_set << 3);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+ mac->min_space_cfg);
+
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+
+ break;
+ }
+ case HW_VAR_AMPDU_FACTOR:{
+ u8 factor_toset;
+ u8 regtoset;
+ u8 factorlevel[18] = {
+ 2, 4, 4, 7, 7, 13, 13,
+ 13, 2, 7, 7, 13, 13,
+ 15, 15, 15, 15, 0};
+ u8 index = 0;
+
+ factor_toset = *val;
+ if (factor_toset <= 3) {
+ factor_toset = (1 << (factor_toset + 2));
+ if (factor_toset > 0xf)
+ factor_toset = 0xf;
+
+ for (index = 0; index < 17; index++) {
+ if (factorlevel[index] > factor_toset)
+ factorlevel[index] =
+ factor_toset;
+ }
+
+ for (index = 0; index < 8; index++) {
+ regtoset = ((factorlevel[index * 2]) |
+ (factorlevel[index *
+ 2 + 1] << 4));
+ rtl_write_byte(rtlpriv,
+ AGGLEN_LMT_L + index,
+ regtoset);
+ }
+
+ regtoset = ((factorlevel[16]) |
+ (factorlevel[17] << 4));
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ "Set HW_VAR_AMPDU_FACTOR: %#x\n",
+ factor_toset);
+ }
+ break;
+ }
+ case HW_VAR_AC_PARAM:{
+ u8 e_aci = *val;
+ rtl92s_dm_init_edca_turbo(hw);
+
+ if (rtlpci->acm_method != EACMWAY2_SW)
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_ACM_CTRL,
+ &e_aci);
+ break;
+ }
+ case HW_VAR_ACM_CTRL:{
+ u8 e_aci = *val;
+ union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
+ mac->ac[0].aifs));
+ u8 acm = p_aci_aifsn->f.acm;
+ u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
+
+ acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?
+ 0x0 : 0x1);
+
+ if (acm) {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl |= AcmHw_BeqEn;
+ break;
+ case AC2_VI:
+ acm_ctrl |= AcmHw_ViqEn;
+ break;
+ case AC3_VO:
+ acm_ctrl |= AcmHw_VoqEn;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
+ acm);
+ break;
+ }
+ } else {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl &= (~AcmHw_BeqEn);
+ break;
+ case AC2_VI:
+ acm_ctrl &= (~AcmHw_ViqEn);
+ break;
+ case AC3_VO:
+ acm_ctrl &= (~AcmHw_VoqEn);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+ "HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl);
+ rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
+ break;
+ }
+ case HW_VAR_RCR:{
+ rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
+ rtlpci->receive_config = ((u32 *) (val))[0];
+ break;
+ }
+ case HW_VAR_RETRY_LIMIT:{
+ u8 retry_limit = val[0];
+
+ rtl_write_word(rtlpriv, RETRY_LIMIT,
+ retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+ retry_limit << RETRY_LIMIT_LONG_SHIFT);
+ break;
+ }
+ case HW_VAR_DUAL_TSF_RST: {
+ break;
+ }
+ case HW_VAR_EFUSE_BYTES: {
+ rtlefuse->efuse_usedbytes = *((u16 *) val);
+ break;
+ }
+ case HW_VAR_EFUSE_USAGE: {
+ rtlefuse->efuse_usedpercentage = *val;
+ break;
+ }
+ case HW_VAR_IO_CMD: {
+ break;
+ }
+ case HW_VAR_WPA_CONFIG: {
+ rtl_write_byte(rtlpriv, REG_SECR, *val);
+ break;
+ }
+ case HW_VAR_SET_RPWM:{
+ break;
+ }
+ case HW_VAR_H2C_FW_PWRMODE:{
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS: {
+ ppsc->fw_current_inpsmode = *((bool *) val);
+ break;
+ }
+ case HW_VAR_H2C_FW_JOINBSSRPT:{
+ break;
+ }
+ case HW_VAR_AID:{
+ break;
+ }
+ case HW_VAR_CORRECT_TSF:{
+ break;
+ }
+ case HW_VAR_MRC: {
+ bool bmrc_toset = *((bool *)val);
+ u8 u1bdata = 0;
+
+ if (bmrc_toset) {
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x33);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x03));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1,
+ (u1bdata | 0x04));
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ } else {
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE0, 0x13);
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM1_TRXPATHENABLE,
+ MASKBYTE0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+ MASKBYTE0,
+ ((u1bdata & 0xf0) | 0x01));
+ u1bdata = (u8)rtl_get_bbreg(hw,
+ ROFDM0_TRXPATHENABLE,
+ MASKBYTE1);
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+ MASKBYTE1, (u1bdata & 0xfb));
+
+ /* Update current settings. */
+ rtlpriv->dm.current_mrc_switch = bmrc_toset;
+ }
+
+ break;
+ }
+ case HW_VAR_FW_LPS_ACTION: {
+ bool enter_fwlps = *((bool *)val);
+ u8 rpwm_val, fw_pwrmode;
+ bool fw_current_inps;
+
+ if (enter_fwlps) {
+ rpwm_val = 0x02; /* RF off */
+ fw_current_inps = true;
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *)(&fw_current_inps));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_H2C_FW_PWRMODE,
+ &ppsc->fwctrl_psmode);
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+ &rpwm_val);
+ } else {
+ rpwm_val = 0x0C; /* RF on */
+ fw_pwrmode = FW_PS_ACTIVE_MODE;
+ fw_current_inps = false;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+ &rpwm_val);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_PWRMODE,
+ &fw_pwrmode);
+
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *)(&fw_current_inps));
+ }
+ break; }
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ break;
+ }
+
+}
+
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 sec_reg_value = 0x0;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
+ rtlpriv->sec.pairwise_enc_algorithm,
+ rtlpriv->sec.group_enc_algorithm);
+
+ if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "not open hw encryption\n");
+ return;
+ }
+
+ sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+
+ if (rtlpriv->sec.use_defaultkey) {
+ sec_reg_value |= SCR_TXUSEDK;
+ sec_reg_value |= SCR_RXUSEDK;
+ }
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
+ sec_reg_value);
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcount = 100;
+ bool bresult = false;
+ u8 tmpvalue;
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
+
+ if ((data & (BIT(6) | BIT(7))) == false) {
+ waitcount = 100;
+ tmpvalue = 0;
+
+ while (1) {
+ waitcount--;
+
+ tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ if ((tmpvalue & BIT(6)))
+ break;
+
+ pr_err("wait for BIT(6) return value %x\n", tmpvalue);
+ if (waitcount == 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (waitcount == 0)
+ bresult = false;
+ else
+ bresult = true;
+ }
+
+ return bresult;
+}
+
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+}
+
+static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1tmp;
+ u8 retval = ERFON;
+
+ /* The following config GPIO function */
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+ /* config GPIO3 to input */
+ u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+ rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+ /* On some of the platform, driver cannot read correct
+ * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
+ mdelay(10);
+
+ /* check GPIO3 */
+ u1tmp = rtl_read_byte(rtlpriv, GPIO_IN_SE);
+ retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
+
+ return retval;
+}
+
+static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ u8 i;
+ u8 tmpu1b;
+ u16 tmpu2b;
+ u8 pollingcnt = 20;
+
+ if (rtlpci->first_init) {
+ /* Reset PCIE Digital */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ tmpu1b &= 0xFE;
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ udelay(1);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0));
+ }
+
+ /* Switch to SW IO control */
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ if (tmpu1b & BIT(7)) {
+ tmpu1b &= ~(BIT(6) | BIT(7));
+
+ /* Set failed, return to prevent hang. */
+ if (!_rtl92se_halset_sysclk(hw, tmpu1b))
+ return;
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ udelay(50);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+ udelay(50);
+
+ /* Clear FW RPWM for FW control LPS.*/
+ rtl_write_byte(rtlpriv, RPWM, 0x0);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ tmpu1b &= 0x73;
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+ tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+ tmpu1b |= 0x08;
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+ tmpu1b &= ~(BIT(3));
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ mdelay(2);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+ /* For warm reboot NIC disappera bug. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
+
+ /* Enable AFE PLL Macro Block */
+ /* We need to delay 100u before enabling PLL. */
+ udelay(200);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+
+ /* for divider reset */
+ udelay(100);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
+ BIT(4) | BIT(6)));
+ udelay(10);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ udelay(10);
+
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
+
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+ if (!_rtl92se_halset_sysclk(hw, tmpu1b))
+ return; /* Set failed, return to prevent hang. */
+
+ rtl_write_word(rtlpriv, CMDR, 0x07FC);
+
+ /* MH We must enable the section of code to prevent load IMEM fail. */
+ /* Load MAC register from WMAc temporarily We simulate macreg. */
+ /* txt HW will provide MAC txt later */
+ rtl_write_byte(rtlpriv, 0x6, 0x30);
+ rtl_write_byte(rtlpriv, 0x49, 0xf0);
+
+ rtl_write_byte(rtlpriv, 0x4b, 0x81);
+
+ rtl_write_byte(rtlpriv, 0xb5, 0x21);
+
+ rtl_write_byte(rtlpriv, 0xdc, 0xff);
+ rtl_write_byte(rtlpriv, 0xdd, 0xff);
+ rtl_write_byte(rtlpriv, 0xde, 0xff);
+ rtl_write_byte(rtlpriv, 0xdf, 0xff);
+
+ rtl_write_byte(rtlpriv, 0x11a, 0x00);
+ rtl_write_byte(rtlpriv, 0x11b, 0x00);
+
+ for (i = 0; i < 32; i++)
+ rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
+
+ rtl_write_byte(rtlpriv, 0x236, 0xff);
+
+ rtl_write_byte(rtlpriv, 0x503, 0x22);
+
+ if (ppsc->support_aspm && !ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x560, 0x40);
+ else
+ rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+ rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
+
+ /* Set RX Desc Address */
+ rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
+ rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma);
+
+ /* Set TX Desc Address */
+ rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma);
+ rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma);
+ rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma);
+ rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma);
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* To make sure that TxDMA can ready to download FW. */
+ /* We should reset TxDMA if IMEM RPT was not ready. */
+ do {
+ tmpu1b = rtl_read_byte(rtlpriv, TCR);
+ if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+ break;
+
+ udelay(5);
+ } while (pollingcnt--);
+
+ if (pollingcnt <= 0) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+ tmpu1b);
+ tmpu1b = rtl_read_byte(rtlpriv, CMDR);
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
+ udelay(2);
+ /* Reset TxDMA */
+ rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
+ }
+
+ /* After MACIO reset,we must refresh LED state. */
+ if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
+ (ppsc->rfoff_reason == 0)) {
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+ enum rf_pwrstate rfpwr_state_toset;
+ rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw);
+
+ if (rfpwr_state_toset == ERFON)
+ rtl92se_sw_led_on(hw, pLed0);
+ }
+}
+
+static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u8 i;
+ u16 tmpu2b;
+
+ /* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
+
+ /* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
+ /* Turn on 0x40 Command register */
+ rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
+ SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
+ RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
+
+ /* Set TCR TX DMA pre 2 FULL enable bit */
+ rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
+ TXDMAPRE2FULL);
+
+ /* Set RCR */
+ rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+ /* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
+
+ /* 4. Timing Control Register (Offset: 0x0080 - 0x009F) */
+ /* Set CCK/OFDM SIFS */
+ /* CCK SIFS shall always be 10us. */
+ rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
+ rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
+
+ /* Set AckTimeout */
+ rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
+
+ /* Beacon related */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
+ rtl_write_word(rtlpriv, ATIMWND, 2);
+
+ /* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
+ /* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
+ /* Firmware allocate now, associate with FW internal setting.!!! */
+
+ /* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
+ /* 5.3 Set driver info, we only accept PHY status now. */
+ /* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO */
+ rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
+
+ /* 6. Adaptive Control Register (Offset: 0x0160 - 0x01CF) */
+ /* Set RRSR to all legacy rate and HT rate
+ * CCK rate is supported by default.
+ * CCK rate will be filtered out only when associated
+ * AP does not support it.
+ * Only enable ACK rate to OFDM 24M
+ * Disable RRSR for CCK rate in A-Cut */
+
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xf0);
+ else if (rtlhal->version == VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RRSR, 0xff);
+ rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
+ rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
+
+ /* A-Cut IC do not support CCK rate. We forbid ARFR to */
+ /* fallback to CCK rate */
+ for (i = 0; i < 8; i++) {
+ /*Disable RRSR for CCK rate in A-Cut */
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
+ }
+
+ /* Different rate use different AMPDU size */
+ /* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
+ rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
+ /* MCS0/1/2/3 use max AMPDU size 4*2=8K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
+ /* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
+ /* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
+ /* MCS12/13/14/15 use max AMPDU size 15*2=30K */
+ rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
+
+ /* Set Data / Response auto rate fallack retry count */
+ rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
+ rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
+ rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
+
+ /* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
+ /* Set all rate to support SG */
+ rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
+
+ /* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
+ /* Set NAV protection length */
+ rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
+ /* CF-END Threshold */
+ rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
+ /* Set AMPDU minimum space */
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
+ /* Set TXOP stall control for several queue/HI/BCN/MGT/ */
+ rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
+
+ /* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
+ /* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
+ /* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
+ /* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
+ /* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
+
+ /* 14. Set driver info, we only accept PHY status now. */
+ rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
+
+ /* 15. For EEPROM R/W Workaround */
+ /* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
+ tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
+
+ /* 17. For EFUSE */
+ /* We may R/W EFUSE in EEPROM mode */
+ if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ u8 tempval;
+
+ tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+ tempval &= 0xFE;
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
+
+ /* Change Program timing */
+ rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "EFUSE CONFIG OK\n");
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "OK\n");
+
+}
+
+static void _rtl92se_hw_configure(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ u8 reg_bw_opmode = 0;
+ u32 reg_rrsr = 0;
+ u8 regtmp = 0;
+
+ reg_bw_opmode = BW_OPMODE_20MHZ;
+ reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+ regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
+ reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
+ rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+
+ /* Set Retry Limit here */
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+ (u8 *)(&rtlpci->shortretry_limit));
+
+ rtl_write_byte(rtlpriv, MLT, 0x8f);
+
+ /* For Min Spacing configuration. */
+ switch (rtlphy->rf_type) {
+ case RF_1T2R:
+ case RF_1T1R:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+ break;
+ case RF_2T2R:
+ case RF_2T2R_GREEN:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+ break;
+ }
+ rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
+}
+
+int rtl92se_hw_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 tmp_byte = 0;
+ unsigned long flags;
+ bool rtstatus = true;
+ u8 tmp_u1b;
+ int err = false;
+ u8 i;
+ int wdcapra_add[] = {
+ EDCAPARA_BE, EDCAPARA_BK,
+ EDCAPARA_VI, EDCAPARA_VO};
+ u8 secr_value = 0x0;
+
+ rtlpci->being_init_adapter = true;
+
+ /* As this function can take a very long time (up to 350 ms)
+ * and can be called with irqs disabled, reenable the irqs
+ * to let the other devices continue being serviced.
+ *
+ * It is safe doing so since our own interrupts will only be enabled
+ * in a subsequent step.
+ */
+ local_save_flags(flags);
+ local_irq_enable();
+
+ rtlpriv->intf_ops->disable_aspm(hw);
+
+ /* 1. MAC Initialize */
+ /* Before FW download, we have to set some MAC register */
+ _rtl92se_macconfig_before_fwdownload(hw);
+
+ rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
+ PMC_FSM) >> 16) & 0xF);
+
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+ /* 2. download firmware */
+ rtstatus = rtl92s_download_fw(hw);
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "Failed to download FW. Init HW without FW now... "
+ "Please copy FW into /lib/firmware/rtlwifi\n");
+ err = 1;
+ goto exit;
+ }
+
+ /* After FW download, we have to reset MAC register */
+ _rtl92se_macconfig_after_fwdownload(hw);
+
+ /*Retrieve default FW Cmd IO map. */
+ rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, LBUS_MON_ADDR);
+ rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
+
+ /* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
+ if (!rtl92s_phy_mac_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+ err = rtstatus;
+ goto exit;
+ }
+
+ /* because last function modify RCR, so we update
+ * rcr var here, or TP will unstable for receive_config
+ * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
+ */
+ rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR);
+ rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
+ rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+ /* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
+ /* We must set flag avoid BB/RF config period later!! */
+ rtl_write_dword(rtlpriv, CMDR, 0x37FC);
+
+ /* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
+ if (!rtl92s_phy_bb_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+ err = rtstatus;
+ goto exit;
+ }
+
+ /* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
+ /* Before initalizing RF. We can not use FW to do RF-R/W. */
+
+ rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+
+ /* Before RF-R/W we must execute the IO from Scott's suggestion. */
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
+ if (rtlhal->version == VERSION_8192S_ACUT)
+ rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
+ else
+ rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
+
+ if (!rtl92s_phy_rf_config(hw)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
+ err = rtstatus;
+ goto exit;
+ }
+
+ /* After read predefined TXT, we must set BB/MAC/RF
+ * register as our requirement */
+
+ rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)0,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+ rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
+ (enum radio_path)1,
+ RF_CHNLBW,
+ RFREG_OFFSET_MASK);
+
+ /*---- Set CCK and OFDM Block "ON"----*/
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+
+ /*3 Set Hardware(Do nothing now) */
+ _rtl92se_hw_configure(hw);
+
+ /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+ /* TX power index for different rate set. */
+ /* Get original hw reg values */
+ rtl92s_phy_get_hw_reg_originalvalue(hw);
+ /* Write correct tx power index */
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+ /* We must set MAC address after firmware download. */
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ /* EEPROM R/W workaround */
+ tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
+ rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
+
+ rtl_write_byte(rtlpriv, 0x4d, 0x0);
+
+ if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
+ tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
+ tmp_byte = tmp_byte | BIT(5);
+ rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
+ rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
+ }
+
+ /* We enable high power and RA related mechanism after NIC
+ * initialized. */
+ if (hal_get_firmwareversion(rtlpriv) >= 0x35) {
+ /* Fw v.53 and later. */
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+ } else if (hal_get_firmwareversion(rtlpriv) == 0x34) {
+ /* Fw v.52. */
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_INIT);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ } else {
+ /* Compatible earlier FW version. */
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ }
+
+ /* Add to prevent ASPM bug. */
+ /* Always enable hst and NIC clock request. */
+ rtl92s_phy_switch_ephy_parameter(hw);
+
+ /* Security related
+ * 1. Clear all H/W keys.
+ * 2. Enable H/W encryption/decryption. */
+ rtl_cam_reset_all_entry(hw);
+ secr_value |= SCR_TXENCENABLE;
+ secr_value |= SCR_RXENCENABLE;
+ secr_value |= SCR_NOSKMC;
+ rtl_write_byte(rtlpriv, REG_SECR, secr_value);
+
+ for (i = 0; i < 4; i++)
+ rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
+
+ if (rtlphy->rf_type == RF_1T2R) {
+ bool mrc2set = true;
+ /* Turn on B-Path */
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
+ }
+
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
+ rtl92s_dm_init(hw);
+exit:
+ local_irq_restore(flags);
+ rtlpci->being_init_adapter = false;
+ return err;
+}
+
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr)
+{
+ /* This is a stub. */
+}
+
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 reg_rcr;
+
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+
+ rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+
+ if (check_bssid) {
+ reg_rcr |= (RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ } else if (!check_bssid) {
+ reg_rcr &= (~RCR_CBSSID);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ }
+
+}
+
+static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
+ enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+ u32 temp;
+ bt_msr &= ~MSR_LINK_MASK;
+
+ switch (type) {
+ case NL80211_IFTYPE_UNSPECIFIED:
+ bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to NO LINK!\n");
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to Ad Hoc!\n");
+ break;
+ case NL80211_IFTYPE_STATION:
+ bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to STA!\n");
+ break;
+ case NL80211_IFTYPE_AP:
+ bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Set Network type to AP!\n");
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Network type %d not supported!\n", type);
+ return 1;
+
+ }
+
+ if (type != NL80211_IFTYPE_AP &&
+ rtlpriv->mac80211.link_state < MAC80211_LINKED)
+ bt_msr = rtl_read_byte(rtlpriv, MSR) & ~MSR_LINK_MASK;
+ rtl_write_byte(rtlpriv, MSR, bt_msr);
+
+ temp = rtl_read_dword(rtlpriv, TCR);
+ rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
+ rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
+
+
+ return 0;
+}
+
+/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
+int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (_rtl92se_set_media_status(hw, type))
+ return -EOPNOTSUPP;
+
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92se_set_check_bssid(hw, true);
+ } else {
+ rtl92se_set_check_bssid(hw, false);
+ }
+
+ return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl92s_dm_init_edca_turbo(hw);
+
+ switch (aci) {
+ case AC1_BK:
+ rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
+ break;
+ case AC0_BE:
+ /* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
+ break;
+ case AC2_VI:
+ rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
+ break;
+ case AC3_VO:
+ rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
+ break;
+ default:
+ RT_ASSERT(false, "invalid aci: %d !\n", aci);
+ break;
+ }
+}
+
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
+ /* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
+ rtlpci->irq_enabled = true;
+}
+
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv;
+ struct rtl_pci *rtlpci;
+
+ rtlpriv = rtl_priv(hw);
+ /* if firmware not available, no interrupts */
+ if (!rtlpriv || !rtlpriv->max_fw_size)
+ return;
+ rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ rtl_write_dword(rtlpriv, INTA_MASK, 0);
+ rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
+ rtlpci->irq_enabled = false;
+}
+
+static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 waitcnt = 100;
+ bool result = false;
+ u8 tmp;
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+ /* Wait the MAC synchronized. */
+ udelay(400);
+
+ /* Check if it is set ready. */
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+ result = ((tmp & BIT(7)) == (data & BIT(7)));
+
+ if ((data & (BIT(6) | BIT(7))) == false) {
+ waitcnt = 100;
+ tmp = 0;
+
+ while (1) {
+ waitcnt--;
+ tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+
+ if ((tmp & BIT(6)))
+ break;
+
+ pr_err("wait for BIT(6) return value %x\n", tmp);
+
+ if (waitcnt == 0)
+ break;
+ udelay(10);
+ }
+
+ if (waitcnt == 0)
+ result = false;
+ else
+ result = true;
+ }
+
+ return result;
+}
+
+static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u8 u1btmp;
+
+ if (rtlhal->driver_going2unload)
+ rtl_write_byte(rtlpriv, 0x560, 0x0);
+
+ /* Power save for BB/RF */
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp |= BIT(0);
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ rtl_write_word(rtlpriv, CMDR, 0x0000);
+
+ if (rtlhal->driver_going2unload) {
+ u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
+ u1btmp &= ~(BIT(0));
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
+ }
+
+ u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+
+ /* Add description. After switch control path. register
+ * after page1 will be invisible. We can not do any IO
+ * for register>0x40. After resume&MACIO reset, we need
+ * to remember previous reg content. */
+ if (u1btmp & BIT(7)) {
+ u1btmp &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, u1btmp)) {
+ pr_err("Switch ctrl path fail\n");
+ return;
+ }
+ }
+
+ /* Power save for MAC */
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS &&
+ !rtlhal->driver_going2unload) {
+ /* enable LED function */
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ /* SW/HW radio off or halt adapter!! For example S3/S4 */
+ } else {
+ /* LED function disable. Power range is about 8mA now. */
+ /* if write 0xF1 disconnet_pci power
+ * ifconfig wlan0 down power are both high 35:70 */
+ /* if write oxF9 disconnet_pci power
+ * ifconfig wlan0 down power are both low 12:45*/
+ rtl_write_byte(rtlpriv, 0x03, 0xF9);
+ }
+
+ rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x00);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+}
+
+static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+ if (rtlpci->up_first_time == 1)
+ return;
+
+ if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
+ rtl92se_sw_led_on(hw, pLed0);
+ else
+ rtl92se_sw_led_off(hw, pLed0);
+}
+
+
+static void _rtl92se_power_domain_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 tmpu2b;
+ u8 tmpu1b;
+
+ rtlpriv->psc.pwrdomain_protect = true;
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ if (tmpu1b & BIT(7)) {
+ tmpu1b &= ~(BIT(6) | BIT(7));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+ }
+
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+
+ /* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
+ tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+
+ /* If IPS we need to turn LED on. So we not
+ * not disable BIT 3/7 of reg3. */
+ if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
+ tmpu1b &= 0xFB;
+ else
+ tmpu1b &= 0x73;
+
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+ /* wait for BIT 10/11/15 to pull high automatically!! */
+ mdelay(1);
+
+ rtl_write_byte(rtlpriv, CMDR, 0);
+ rtl_write_byte(rtlpriv, TCR, 0);
+
+ /* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+ tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+ tmpu1b |= 0x08;
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+ tmpu1b &= ~(BIT(3));
+ rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+ /* Enable AFE clock source */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+ /* Delay 1.5ms */
+ udelay(1500);
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+ /* Enable AFE Macro Block's Bandgap */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Enable AFE Mbias */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+ rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+ mdelay(1);
+
+ /* Enable LDOA15 block */
+ tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+ rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+ /* Set Digital Vdd to Retention isolation Path. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+ rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+
+ /* For warm reboot NIC disappera bug. */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
+
+ /* Enable AFE PLL Macro Block */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+ /* Enable MAC 80MHZ clock */
+ tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+ rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+ mdelay(1);
+
+ /* Release isolation AFE PLL & MD */
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+ /* Enable MAC clock */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+ /* Enable Core digital and enable IOREG R/W */
+ tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+ /* enable REG_EN */
+ rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+ /* Switch the control path. */
+ tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+ rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+ tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+ tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+ if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+ rtlpriv->psc.pwrdomain_protect = false;
+ return;
+ }
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+ /* After MACIO reset,we must refresh LED state. */
+ _rtl92se_gen_refreshledstate(hw);
+
+ rtlpriv->psc.pwrdomain_protect = false;
+}
+
+void rtl92se_card_disable(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum nl80211_iftype opmode;
+ u8 wait = 30;
+
+ rtlpriv->intf_ops->enable_aspm(hw);
+
+ if (rtlpci->driver_is_goingto_unload ||
+ ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+ /* this is very important for ips power save */
+ while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
+ if (rtlpriv->psc.pwrdomain_protect)
+ mdelay(20);
+ else
+ break;
+ }
+
+ mac->link_state = MAC80211_NOLINK;
+ opmode = NL80211_IFTYPE_UNSPECIFIED;
+ _rtl92se_set_media_status(hw, opmode);
+
+ _rtl92s_phy_set_rfhalt(hw);
+ udelay(100);
+}
+
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
+ u32 *p_intb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+ rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+ *p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1];
+ rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+}
+
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcntime_cfg = 0;
+ u16 bcn_cw = 6, bcn_ifs = 0xf;
+ u16 atim_window = 2;
+
+ /* ATIM Window (in unit of TU). */
+ rtl_write_word(rtlpriv, ATIMWND, atim_window);
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
+
+ /* DrvErlyInt (in unit of TU). (Time to send
+ * interrupt to notify driver to change
+ * beacon content) */
+ rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
+
+ /* BcnDMATIM(in unit of us). Indicates the
+ * time before TBTT to perform beacon queue DMA */
+ rtl_write_word(rtlpriv, BCN_DMATIME, 256);
+
+ /* Force beacon frame transmission even
+ * after receiving beacon frame from
+ * other ad hoc STA */
+ rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
+
+ /* Beacon Time Configuration */
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
+
+ /* TODO: bcn_ifs may required to be changed on ASIC */
+ bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
+
+ /*for beacon changed */
+ rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
+}
+
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcn_interval = mac->beacon_interval;
+
+ /* Beacon interval (in unit of TU). */
+ rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
+ /* 2008.10.24 added by tynli for beacon changed. */
+ rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
+}
+
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n",
+ add_msr, rm_msr);
+
+ if (add_msr)
+ rtlpci->irq_mask[0] |= add_msr;
+
+ if (rm_msr)
+ rtlpci->irq_mask[0] &= (~rm_msr);
+
+ rtl92se_disable_interrupt(hw);
+ rtl92se_enable_interrupt(hw);
+}
+
+static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
+{
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 efuse_id;
+
+ rtlhal->ic_class = IC_INFERIORITY_A;
+
+ /* Only retrieving while using EFUSE. */
+ if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
+ !rtlefuse->autoload_failflag) {
+ efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
+
+ if (efuse_id == 0xfe)
+ rtlhal->ic_class = IC_INFERIORITY_B;
+ }
+}
+
+static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u16 i, usvalue;
+ u16 eeprom_id;
+ u8 tempval;
+ u8 hwinfo[HWSET_MAX_SIZE_92S];
+ u8 rf_path, index;
+
+ if (rtlefuse->epromtype == EEPROM_93C46) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "RTL819X Not boot from eeprom, check it !!\n");
+ } else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ rtl_efuse_shadow_map_update(hw);
+
+ memcpy((void *)hwinfo, (void *)
+ &rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+ HWSET_MAX_SIZE_92S);
+ }
+
+ RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
+ hwinfo, HWSET_MAX_SIZE_92S);
+
+ eeprom_id = *((u16 *)&hwinfo[0]);
+ if (eeprom_id != RTL8190_EEPROM_ID) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
+ rtlefuse->autoload_failflag = true;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+ rtlefuse->autoload_failflag = false;
+ }
+
+ if (rtlefuse->autoload_failflag)
+ return;
+
+ _rtl8192se_get_IC_Inferiority(hw);
+
+ /* Read IC Version && Channel Plan */
+ /* VID, DID SE 0xA-D */
+ rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+ rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+ rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+ rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+ rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROMId = 0x%4x\n", eeprom_id);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
+
+ for (i = 0; i < 6; i += 2) {
+ usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+ *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+ }
+
+ for (i = 0; i < 6; i++)
+ rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
+
+ /* Get Tx Power Level by Channel */
+ /* Read Tx power of Channel 1 ~ 14 from EEPROM. */
+ /* 92S suupport RF A & B */
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read CCK RF A & B Tx power */
+ rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 1T */
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+ hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
+
+ /* Read OFDM RF A & B Tx power for 2T */
+ rtlefuse->eprom_chnl_txpwr_ht40_2sdf[rf_path][i]
+ = hwinfo[EEPROM_TXPOWERBASE + 12 +
+ rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM CCK Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][i]);
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][i]);
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ for (i = 0; i < 3; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+ "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+ rf_path, i,
+ rtlefuse->eprom_chnl_txpwr_ht40_2sdf
+ [rf_path][i]);
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+
+ /* Assign dedicated channel tx power */
+ for (i = 0; i < 14; i++) {
+ /* channel 1~3 use the same Tx Power Level. */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ /* Record A & B CCK /OFDM - 1T/2T Channel area
+ * tx power */
+ rtlefuse->txpwrlevel_cck[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_cck
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
+ rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+ [rf_path][index];
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i] =
+ rtlefuse->eprom_chnl_txpwr_ht40_2sdf
+ [rf_path][index];
+ }
+
+ for (i = 0; i < 14; i++) {
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
+ rf_path, i,
+ rtlefuse->txpwrlevel_cck[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+ rtlefuse->txpwrlevel_ht40_2s[rf_path][i]);
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ /* Read Power diff limit. */
+ rtlefuse->eeprom_pwrgroup[rf_path][i] =
+ hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
+ }
+ }
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ /* Fill Pwr group */
+ for (i = 0; i < 14; i++) {
+ /* Chanel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-13 */
+ else
+ index = 2;
+
+ rtlefuse->pwrgroup_ht20[rf_path][i] =
+ (rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf);
+ rtlefuse->pwrgroup_ht40[rf_path][i] =
+ ((rtlefuse->eeprom_pwrgroup[rf_path][index] &
+ 0xf0) >> 4);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht20[rf_path][i]);
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+ rf_path, i,
+ rtlefuse->pwrgroup_ht40[rf_path][i]);
+ }
+ }
+
+ for (i = 0; i < 14; i++) {
+ /* Read tx power difference between HT OFDM 20/40 MHZ */
+ /* channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 1;
+ /* Channel 9-14 */
+ else
+ index = 2;
+
+ tempval = hwinfo[EEPROM_TX_PWR_HT20_DIFF + index] & 0xff;
+ rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+ rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+ /* Read OFDM<->HT tx power diff */
+ /* Channel 1-3 */
+ if (i < 3)
+ index = 0;
+ /* Channel 4-8 */
+ else if (i < 8)
+ index = 0x11;
+ /* Channel 9-14 */
+ else
+ index = 1;
+
+ tempval = hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index] & 0xff;
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
+ (tempval & 0xF);
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+ ((tempval >> 4) & 0xF);
+
+ tempval = hwinfo[TX_PWR_SAFETY_CHK];
+ rtlefuse->txpwr_safetyflag = (tempval & 0x01);
+ }
+
+ rtlefuse->eeprom_regulatory = 0;
+ if (rtlefuse->eeprom_version >= 2) {
+ /* BIT(0)~2 */
+ if (rtlefuse->eeprom_version >= 4)
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x7);
+ else /* BIT(0) */
+ rtlefuse->eeprom_regulatory =
+ (hwinfo[EEPROM_REGULATORY] & 0x1);
+ }
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
+
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
+ for (i = 0; i < 14; i++)
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
+ i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
+
+ /* Read RF-indication and Tx Power gain
+ * index diff of legacy to HT OFDM rate. */
+ tempval = hwinfo[EEPROM_RFIND_POWERDIFF] & 0xff;
+ rtlefuse->eeprom_txpowerdiff = tempval;
+ rtlefuse->legacy_httxpowerdiff =
+ rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
+
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
+
+ /* Get TSSI value for each path. */
+ usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
+ rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
+ usvalue = hwinfo[EEPROM_TSSI_B];
+ rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
+
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+ rtlefuse->eeprom_tssi[RF90_PATH_A],
+ rtlefuse->eeprom_tssi[RF90_PATH_B]);
+
+ /* Read antenna tx power offset of B/C/D to A from EEPROM */
+ /* and read ThermalMeter from EEPROM */
+ tempval = hwinfo[EEPROM_THERMALMETER];
+ rtlefuse->eeprom_thermalmeter = tempval;
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
+
+ /* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
+ rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
+ rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
+
+ /* Read CrystalCap from EEPROM */
+ tempval = hwinfo[EEPROM_CRYSTALCAP] >> 4;
+ rtlefuse->eeprom_crystalcap = tempval;
+ /* CrystalCap, BIT(12)~15 */
+ rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
+
+ /* Read IC Version && Channel Plan */
+ /* Version ID, Channel plan */
+ rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
+ rtlefuse->txpwr_fromeprom = true;
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
+ "EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
+
+ /* Read Customer ID or Board Type!!! */
+ tempval = hwinfo[EEPROM_BOARDTYPE];
+ /* Change RF type definition */
+ if (tempval == 0)
+ rtlphy->rf_type = RF_2T2R;
+ else if (tempval == 1)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 2)
+ rtlphy->rf_type = RF_1T2R;
+ else if (tempval == 3)
+ rtlphy->rf_type = RF_1T1R;
+
+ /* 1T2R but 1SS (1x1 receive combining) */
+ rtlefuse->b1x1_recvcombine = false;
+ if (rtlphy->rf_type == RF_1T2R) {
+ tempval = rtl_read_byte(rtlpriv, 0x07);
+ if (!(tempval & BIT(0))) {
+ rtlefuse->b1x1_recvcombine = true;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "RF_TYPE=1T2R but only 1SS\n");
+ }
+ }
+ rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
+ rtlefuse->eeprom_oemid = *&hwinfo[EEPROM_CUSTOMID];
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x",
+ rtlefuse->eeprom_oemid);
+
+ /* set channel paln to world wide 13 */
+ rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+}
+
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 tmp_u1b = 0;
+
+ tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
+
+ if (tmp_u1b & BIT(4)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
+ rtlefuse->epromtype = EEPROM_93C46;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
+ rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+ }
+
+ if (tmp_u1b & BIT(5)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
+ rtlefuse->autoload_failflag = false;
+ _rtl92se_read_adapter_info(hw);
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ rtlefuse->autoload_failflag = true;
+ }
+}
+
+static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
+ u8 ratr_index = 0;
+ u8 nmode = mac->ht_enable;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate = 0;
+ u32 tmp_ratr_value = 0;
+ u8 curtxbw_40mhz = mac->bw_40;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = mac->mode;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_value = 0xfff;
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ ratr_value &= 0x0000000D;
+ break;
+ case WIRELESS_MODE_G:
+ ratr_value &= 0x00000FF5;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ nmode = 1;
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ ratr_value &= 0x0007F005;
+ } else {
+ u32 ratr_mask;
+
+ if (get_rf_type(rtlphy) == RF_1T2R ||
+ get_rf_type(rtlphy) == RF_1T1R) {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x000ff015;
+ else
+ ratr_mask = 0x000ff005;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_mask = 0x0f0ff015;
+ else
+ ratr_mask = 0x0f0ff005;
+ }
+
+ ratr_value &= ratr_mask;
+ }
+ break;
+ default:
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_value &= 0x000ff0ff;
+ else
+ ratr_value &= 0x0f0ff0ff;
+
+ break;
+ }
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_value &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_value &= 0x0FFFFFF0;
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
+ ratr_value |= 0x10000000;
+ tmp_ratr_value = (ratr_value >> 12);
+
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & tmp_ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
+ if (ratr_value & 0xfffff000)
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
+ else
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+ rtl_read_dword(rtlpriv, ARFR0));
+}
+
+static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index = 0;
+ u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
+ bool shortgi = false;
+ u32 ratr_value = 0;
+ u8 shortgi_rate = 0;
+ u32 mask = 0;
+ u32 band = 0;
+ bool bmulticast = false;
+ u8 macid = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_bitmap = 0xfff;
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ band |= WIRELESS_11B;
+ ratr_index = RATR_INX_WIRELESS_B;
+ if (ratr_bitmap & 0x0000000c)
+ ratr_bitmap &= 0x0000000d;
+ else
+ ratr_bitmap &= 0x0000000f;
+ break;
+ case WIRELESS_MODE_G:
+ band |= (WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_GB;
+
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00000f00;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x00000ff0;
+ else
+ ratr_bitmap &= 0x00000ff5;
+ break;
+ case WIRELESS_MODE_A:
+ band |= WIRELESS_11A;
+ ratr_index = RATR_INX_WIRELESS_A;
+ ratr_bitmap &= 0x00000ff0;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00070000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0007f000;
+ else
+ ratr_bitmap &= 0x0007f005;
+ } else {
+ if (rtlphy->rf_type == RF_1T2R ||
+ rtlphy->rf_type == RF_1T1R) {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x000f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x000fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x000ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x000ff015;
+ else
+ ratr_bitmap &= 0x000ff005;
+ }
+ } else {
+ if (rssi_level == 1) {
+ ratr_bitmap &= 0x0f8f0000;
+ } else if (rssi_level == 3) {
+ ratr_bitmap &= 0x0f8fc000;
+ } else if (rssi_level == 5) {
+ ratr_bitmap &= 0x0f8ff000;
+ } else {
+ if (curtxbw_40mhz)
+ ratr_bitmap &= 0x0f8ff015;
+ else
+ ratr_bitmap &= 0x0f8ff005;
+ }
+ }
+ }
+
+ if ((curtxbw_40mhz && curshortgi_40mhz) ||
+ (!curtxbw_40mhz && curshortgi_20mhz)) {
+ if (macid == 0)
+ shortgi = true;
+ else if (macid == 1)
+ shortgi = false;
+ }
+ break;
+ default:
+ band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_bitmap &= 0x000ff0ff;
+ else
+ ratr_bitmap &= 0x0f8ff0ff;
+ break;
+ }
+ sta_entry->ratr_index = ratr_index;
+
+ if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+ ratr_bitmap &= 0x0FFFFFFF;
+ else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+ ratr_bitmap &= 0x0FFFFFF0;
+
+ if (shortgi) {
+ ratr_bitmap |= 0x10000000;
+ /* Get MAX MCS available. */
+ ratr_value = (ratr_bitmap >> 12);
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & ratr_value)
+ break;
+ }
+
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+ rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+ }
+
+ mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, "mask = %x, bitmap = %x\n",
+ mask, ratr_bitmap);
+ rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
+ rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92se_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92se_update_hal_rate_table(hw, sta);
+}
+
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 sifs_timer;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+ &mac->slot_time);
+ sifs_timer = 0x0e0e;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+
+}
+
+/* this ifunction is for RFKILL, it's different with windows,
+ * because UI will disable wireless when GPIO Radio Off.
+ * And here we not check or Disable/Enable ASPM like windows*/
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ enum rf_pwrstate rfpwr_toset /*, cur_rfstate */;
+ unsigned long flag = 0;
+ bool actuallyset = false;
+ bool turnonbypowerdomain = false;
+
+ /* just 8191se can check gpio before firstup, 92c/92d have fixed it */
+ if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+ return false;
+
+ if (ppsc->swrf_processing)
+ return false;
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (ppsc->rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ return false;
+ } else {
+ ppsc->rfchange_inprogress = true;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ /* cur_rfstate = ppsc->rfpwr_state;*/
+
+ /* because after _rtl92s_phy_set_rfhalt, all power
+ * closed, so we must open some power for GPIO check,
+ * or we will always check GPIO RFOFF here,
+ * And we should close power after GPIO check */
+ if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+ _rtl92se_power_domain_init(hw);
+ turnonbypowerdomain = true;
+ }
+
+ rfpwr_toset = _rtl92se_rf_onoff_detect(hw);
+
+ if ((ppsc->hwradiooff) && (rfpwr_toset == ERFON)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ "RFKILL-HW Radio ON, RF ON\n");
+
+ rfpwr_toset = ERFON;
+ ppsc->hwradiooff = false;
+ actuallyset = true;
+ } else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
+ RT_TRACE(rtlpriv, COMP_RF,
+ DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
+
+ rfpwr_toset = ERFOFF;
+ ppsc->hwradiooff = true;
+ actuallyset = true;
+ }
+
+ if (actuallyset) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+ /* this not include ifconfig wlan0 down case */
+ /* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
+ } else {
+ /* because power_domain_init may be happen when
+ * _rtl92s_phy_set_rfhalt, this will open some powers
+ * and cause current increasing about 40 mA for ips,
+ * rfoff and ifconfig down, so we set
+ * _rtl92s_phy_set_rfhalt again here */
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
+ turnonbypowerdomain) {
+ _rtl92s_phy_set_rfhalt(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ }
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ *valid = 1;
+ return !ppsc->hwradiooff;
+
+}
+
+/* Is_wepkey just used for WEP used as group & pairwise key
+ * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
+ bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 *macaddr = p_macaddr;
+
+ u32 entry_id = 0;
+ bool is_pairwise = false;
+
+ static u8 cam_const_addr[4][6] = {
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+ };
+ static u8 cam_const_broad[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+
+ if (clear_all) {
+ u8 idx = 0;
+ u8 cam_offset = 0;
+ u8 clear_number = 5;
+
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
+
+ for (idx = 0; idx < clear_number; idx++) {
+ rtl_cam_mark_invalid(hw, cam_offset + idx);
+ rtl_cam_empty_entry(hw, cam_offset + idx);
+
+ if (idx < 5) {
+ memset(rtlpriv->sec.key_buf[idx], 0,
+ MAX_KEY_LEN);
+ rtlpriv->sec.key_len[idx] = 0;
+ }
+ }
+
+ } else {
+ switch (enc_algo) {
+ case WEP40_ENCRYPTION:
+ enc_algo = CAM_WEP40;
+ break;
+ case WEP104_ENCRYPTION:
+ enc_algo = CAM_WEP104;
+ break;
+ case TKIP_ENCRYPTION:
+ enc_algo = CAM_TKIP;
+ break;
+ case AESCCMP_ENCRYPTION:
+ enc_algo = CAM_AES;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "switch case not processed\n");
+ enc_algo = CAM_TKIP;
+ break;
+ }
+
+ if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+ macaddr = cam_const_addr[key_index];
+ entry_id = key_index;
+ } else {
+ if (is_group) {
+ macaddr = cam_const_broad;
+ entry_id = key_index;
+ } else {
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv,
+ COMP_SEC, DBG_EMERG,
+ "Can not find free hw security cam entry\n");
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
+ key_index = PAIRWISE_KEYIDX;
+ is_pairwise = true;
+ }
+ }
+
+ if (rtlpriv->sec.key_len[key_index] == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "delete one entry, entry_id is %d\n",
+ entry_id);
+ if (mac->opmode == NL80211_IFTYPE_AP)
+ rtl_cam_del_entry(hw, p_macaddr);
+ rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "add one entry\n");
+ if (is_pairwise) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "set Pairwise key\n");
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[key_index]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ "set group key\n");
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ rtl_cam_add_one_entry(hw,
+ rtlefuse->dev_addr,
+ PAIRWISE_KEYIDX,
+ CAM_PAIRWISE_KEY_POSITION,
+ enc_algo, CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+
+ }
+ }
+}
+
+void rtl92se_suspend(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtlpci->up_first_time = true;
+}
+
+void rtl92se_resume(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u32 val;
+
+ pci_read_config_dword(rtlpci->pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(rtlpci->pdev, 0x40,
+ val & 0xffff00ff);
+}
Code Review / kvmfornfv.git / blobdiff